Making a Dead Blow Mallet - Inspired by 'PB Swiss Tools'
Рет қаралды 1,415,429
3 жыл бұрынIn this video I'm going to make a dead blow mallet from scratch, inspired by the model of @PBSwissTools .
Dead blow mallets with nylon heads are always used when you don't want to damage the parts when hammering. They're always very nice to work with because they have no rebound. To achieve that they mostly have lead balls inside of the hammer head. This version though has steel discs inside, which eliminates even more rebound than the lead balls. A dead blow mallet is definitely a must have tool in a shop. I reall like the ones from PB Swiss Tools and I'm not just saying that because it's a sponsored video. Top notch swiss quality. I really like the feature that you can replace the nylon heads and the handle if they break, both are available as original spare parts.
If you're in need of a dead blow mallet and you can't make your own, than I highly recommend the ones from PB Swiss Tools. They come in different types and sizes. Check the links below.
PB Swiss Tools website:
www.pbswisstools.com
Sales Point website:
www.pbswisstools.com/en/speci...
I hope you like my work and the video.
Huge thank you to all of my Patreon supporters and specially to:
Tonya M Broerman
Zack Thompson
Adel AlSaffar
afreeflyingsoul
Yale Baker
Gregory
Alex McGeorge
Alistair Moor
Amar.k
Anthony Eufemio
Bendurion
Br. Micheal-Francis Smith, OSB
Cassandra moore
Chris walter
David Barker
Greenstitute
Haitham Al Zir
HouziMoto
Josh Ledford
Josh Wasserman
Joshua Bentley
Lambda GPU Workstations
Louie Carboni
Marius Costan
Matt Boothman
Mellissa Marcus
Monte Gibbs
Muzaffer Aksoy
Nick Houston
Paul Mampilly
Pong Lenis
potokslow
SaoodAlrabah
Thomas & Jenni Wendel
Tyler Autry
Tyler Carruth
Vickie Bligh
Vince Valenti
Xavier Carbel
Yuri Zapuchlak
Ajna
Alex Breton
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Egerton
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
Brian Hoerl
Cam Benfield
Chad Bryant
Chris Simondet
Daniel Varga
Dave Hardware
Embiss
Frankie deSantis
Geoffroy
Grant Daniel
Grok Senften
Haley McFadden
Harper Kim
Hunter R.
Jack Curry
Jack Scott
Jason Koi
Jeremy Cole
justin f.
Kelly Imgrund
Ken Rosso
Kurt Gazow
Marc Cerisier
Mellissa McConnell
Michael Bier
Mike Donaldson
Nick Cannon
Omar Domínguez
Pasacal Schmikal
Ray Yeager
Regis Vincent
Rev. Gina Pond
Sam Mainville
Scott Marshall
Sergei Shvartsman
Stefan Halter
Subramaniam Venkitaraman
Suiros
Svenja Kuckla
Tim Holt
Trevor Kam
Tucker Ifft
웅록 윤
My camera:
Panasonic HC-VX11
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
Building a Huge Rotary Tumbler from Scratch - Homemade Rotary Tumbler
• Building a Huge Rotary...
„I make a new one“ T-Shirts:
teespring.com/stores/my-mecha...
My Main Channel:
/ mymechanics
My Second Channel:
/ @mymechanicsinsights
My Patreon Page:
/ mymechanics
@PBSwissTools 3 жыл бұрын
This video is very exciting and interesting for us to see how many thought processes and production steps are involved in a rather “simple” tool. The entertaining scene changes let you feel how much heart and soul but also hard work went into this development. We thank you very much for this inspiring collaboration - we work with the best!
@mymechanicsinsights 3 жыл бұрын
Thank you very much for this opportunity to work with you. This was a really fun project to make and I'm glad to hear that you like my work :-)
@customrestoration5317 3 жыл бұрын
Swiss made ❤
@Vickie-Bligh 3 жыл бұрын
You have good taste, PB Swiss. You make excellent tools, and you work with the best!
@Sevalen 3 жыл бұрын
I'm a big fan and I thoroughly enjoyed the video but I have say that is probably a very expensive dead blow hammer when you factor in materials and labor😅
@mymechanicsinsights 3 жыл бұрын
@@Sevalen it is indeed 😅 this makes it even more impressive how cheap their original version of this hammer is.
@Folkloreo 2 жыл бұрын
He beveled the edges of ballast washers which go inside a part that is welded shut. He did finish work on invisible parts. Incredible. 10/10.
@danielreardon6453 Жыл бұрын
However it is now the most expensive hammer in the world
@claudyfocan731 Жыл бұрын
I am a electromechanic, just got out of college with honours! We had to do a years internship at 2 companies. Went for 2places that do industrial maintenance, repairs and revision. The part I really really enjoyed was the complete revisions, I worked with some oldtimers with 30-40y on the job. Expert area of the second company was electric motors (every type) up to the point of completely rewinding them by hand id needed. Gearboxes, pumps, compressors. It all came to us for repairs. They taught me to do this too, to finish every part like it should be. We got motors from Arcelor Mittal’s Ghent factory every week. These live a hard life, especially those close to the furnaces. They came in caked in a mix of metal dust and grease, insulation burnt up, bearings fuckered and the cast connection boxes shattered. So we went to work. Cleaning, degreasing, polishing axles and other parts, measuring all diameters, tapping the holes to clean out the gunk, sandblasting smaller parts of non-critical dimensions. Then it all got inspected, new seals and bearings ordered. Rotors get rewound, enameled and balanced. Then it is all put together according to the rules of the art, by guys who seriously know their job. They taught me real well, it is hard work and it takes patience and a lot of care. We had small ones with aluminum bodies that could be tossed like a baseball. We also had ones that weighed 15tons and came in on large trailers. We do it all. Broken cast iron parts? No problem, if we can’t salvage a part from the corpse of the same type, they are “stitched” back together. I love seeing something come in completely messed up to then see it go out again, like its brand new. Done properly “the customer doesn’t open em up. But we do everything as if they do.” We had motors made in Belgium from the 60’s and 70’s that were still going, we swap the bearings, seals and heck everything (megger and micro-ohmtest)
@teslainvestah5003 Жыл бұрын
A hammer historian in 2251 Y-ray scanning this particular hammer is in for a treat, I tell you.
@Ptrck Жыл бұрын
@@claudyfocan731 I really enjoyed your comment my friend, best to you and my mechanics for the video
@briandavern8741 Жыл бұрын
And to top it off he not only made his own wedge but a superior one at that. Great work!
@FlickAndStuff 2 жыл бұрын
Using the press and shear you restored was a great touch! glad to see those tools being used in their new life.
@raffaelefederico5427 2 жыл бұрын
You are not a restorer. Or a builder. YOU ARE AN ARTIST!!!
@joeyhemlock 3 жыл бұрын
I love that you chamfered every disc even though no one will ever see them again. That's a very mymechanics thing to do!
@mymechanicsinsights 3 жыл бұрын
Quality inside ;-) Sharp edges on the discs might get them stuck.
@andresanibalperalta7967 3 жыл бұрын
@@mymechanicsinsights you could have used washers to begin with. But then you wouldnt have used the shear.
@yaminsiddiqui4690 3 жыл бұрын
Yeah that chamfer helps them from getting stuck. Shoulda put some spray lubricant inside too, but I might be wrong..
@freirecristiane 3 жыл бұрын
@@yaminsiddiqui4690 depending on the spray it could react with the nylon and "melt" it
@aasemkhalid3685 3 жыл бұрын
@@mymechanicsinsights what are the discs for?
@Kellanium 3 жыл бұрын
“Making sharp edges” You doing okay, man? Everyone is worried about you.
@mymechanicsinsights 3 жыл бұрын
Haha, little joke on my side 😉
@amcconnell6730 3 жыл бұрын
It made me smile. :)
@macbaar6073 3 жыл бұрын
Dr. Jeckyl & Mr. McMechanics....
@groreistad5234 3 жыл бұрын
I nearly fell off my chair.
@dddsa5951 3 жыл бұрын
*my mechanics taking the file tool* file: oh, we are again at a quest to make the part safe and removing those sharp my mechanics: making sharp edges file:
@knarf_inc4790 3 жыл бұрын
Thor: "Look at my hammer!" My mechanics: "I'll make you a new one."
@stormkhan4250 3 жыл бұрын
*Gasp* that's it! You have identified My Mechanics real identity as Eitri the Dwarf smith from Nidavellir (Avengers: Infinity War)
@freedomrealized 2 жыл бұрын
I could watch this man make stuff ALL DAY. He is so competent at everything he does.
@CoolAgainRestoration 3 жыл бұрын
This video is the definion of perfection “Swiss made” 😍😍😍
@mymechanicsinsights 3 жыл бұрын
Thank you very much my friend :-)
@NOTSOSLIMJIM 3 жыл бұрын
Umm... Did you see those welds?
@dlaga7462 3 жыл бұрын
@@NOTSOSLIMJIM let’s see your welds there champ. Hater clown
@GeoPePeTto 3 жыл бұрын
@@mymechanicsinsights really missed the opportunity to call the vid hammer time. Jokes aside, even though you don’t post that often, it’s so freaking worth it. The amount of fineness is astonishing. Thanks for the vids and keep it up. Cheers
@damienirvin777 3 жыл бұрын
@@NOTSOSLIMJIM did you see the grinder?
@mushious 3 жыл бұрын
That internal wedge was eye opening. When I saw you cutting the slot in the handle I was like, "but it's a closed head, you can't wedge it!"
@bmandrakeeee8378 3 жыл бұрын
fox wedges. old woodworking trick, not so disseminated because is hard to size the wedge: you really don't know if will get too tight before reaching the end or if will become loose. but in this application works perfectly (and will be a bitch to get out)
@mymechanicsinsights 3 жыл бұрын
@@bmandrakeeee8378 yeah, you pretty much need to drill the handle out and the wedge might get damaged or destroyed. On the original hammer you can buy replacement handles that come with a wedge and a pin.
@csn583 3 жыл бұрын
But is there room inside the top for it to overexpand? Or is it just relying on friction in a cylinder? Ah, well I see there is a spring pin also.
@rahulbetgeri 3 жыл бұрын
It’s not a mallet, its a piece of Art!!! 👌🏼👌🏼👌🏼
@kostasstamatakos1230 3 жыл бұрын
I have the exact same hammer. I have postponing a bigger copy of it, since I would really hate to cut it open in order to understand its design. Thank you both for this project. PS. the PB swiss hammer is really superior to most deadblow hammers I have used.
@mymechanicsinsights 3 жыл бұрын
They are actually selling very big versions of that hammer too.
@keithplumley2054 3 жыл бұрын
It's amazing how watching someone making something as mundane as a hammer could be so satisfying. You sir are a master machinist and I love watching you work.
@mymechanicsinsights 3 жыл бұрын
Thank you very much!
@zbigniewgurak8261 2 жыл бұрын
This thing isn't "a hammer". It's "recoilless" mallet. Necessary for people, who are machining metal for living. To set properly pieces in vises.
@keithplumley2054 2 жыл бұрын
@@zbigniewgurak8261 yes, I realize that. I've got one very similar in my own tool box. We call it a dead-blow mallet. But for the average viewer, it's a hammer.
@JoseRicardo-jc3sw 11 ай бұрын
Vejo vários profissionais restaurando peças antigas e fabricando outras,mas igual ao teu trabalho não. Impecável vc é o melhor. Satisfação em ver teus videos, parabéns.... Top
@mamfzf 3 жыл бұрын
9:43 "Making Sharp Edges" was a plot twist! Loved the video!
@mymechanicsinsights 3 жыл бұрын
A new chapter on this channel ;-) Thanks a lot, glad you liked it.
@windhelmguard5295 3 жыл бұрын
@@mymechanicsinsights didn't you restore a saw once?
@WeGoWalk 2 жыл бұрын
The detail and fine craftsmanship that go into each of your projects is both inspiring and amazing. May we all learn the value of putting the best quality into every project we touch.
@AK-yw9qs 3 жыл бұрын
My wife says you have OCD (obsessive-compulsive disorder), a compliment in a way: ). I don't know why ?? but your postings give me a calming effect, love your work dear, thank you for posting, definitely, saving some doctor bills through your posting :)))
@M00NM0NEY 3 жыл бұрын
When I watch other restoration videos.. often times they rush with the hand moments, body language, the camera shots, and just the overall feel seems to be moving at an unsteady pace. It seems to reflect their work on the restoration. But when I watch mymechanics, he has that finesse. His hand movements are steady and gives time for our eyes to slowly view the object being deconstructed, repaired, and restored. The camera shots are laid out strategically with focus on the object. Even the pace of the lathe work is phenomenal. This channel is what I think ASMR is for a DIYer. Love this channel!
@joeyhemlock 3 жыл бұрын
I get so happy when you use the Beverly Shear. Part of it is Chicago pride, I think, but mostly it's just one of my favorite restorations you've done.
@mymechanicsinsights 3 жыл бұрын
When I restored it, I never knew how useful this will be in the shop. I used it several times now along with the arbor press.
@onesixfive 3 жыл бұрын
I feel the same! Cheers from the NW side!
@PB-nn2dh 3 жыл бұрын
Sorry pal... you’re wrong... this was not a restoration. This was one of the my mechanics moments where he says : I’ll make a new one. He made masterpiece from scratch
@onesixfive 3 жыл бұрын
@@PB-nn2dh he’s referring to the restoration of the Beverly shear. Saying that was one of his fave restorations. Even mymechanics is acknlowedging it (“when I restored it”)
@PB-nn2dh 3 жыл бұрын
@@onesixfive haha, you're right, still he made a masterpiece
@Mianinventions Жыл бұрын
Incredible job 👌
@tracybowling97 3 жыл бұрын
I went with my Dad to the store to try to find only the nylon ends. We couldn't find any. And you went and made the whole thing! You Sir are magic!
@jg2382 3 жыл бұрын
So glad you have a second channel with content like this. Excellent work!
@mymechanicsinsights 3 жыл бұрын
Yeah, was definitely the right decission to make a new one 😅 thank you very much
@SouthOfGate 3 жыл бұрын
@@mymechanicsinsights make as many new ones as possible! 😉
@Tiffany-6910 3 жыл бұрын
Yours was the first machining channel I ever watched, took me a while to explore others, and I just want to say - I came across one recently that welded something and DIDN'T clean up the welds and I realized just how much you spoil us. All I could think about for the rest of that video was those welds.
@Martin_Edmondson 3 жыл бұрын
Yeah, there are a lot of restoration and machining channels, but I haven't seen any of them that come close to using the care and attention to detail that he does. Every single piece is finished to perfection, and it is a joy to watch. His craftsmanship in wood, metal, plastics.. is all incredible.
@pfadiva 3 жыл бұрын
@@Martin_Edmondson if you need a machining fix between My Mechanics post, look at V&M Levsha (I think that's the spelling). He makes small things from scratch, like a tiny working rod and reel or a trick lighter.
@mymechanicsinsights 3 жыл бұрын
@@pfadiva I love his channel too. He always makes very creative interesting projects.
@alanhillyard1639 3 жыл бұрын
Gotta say though, might not have needed to clean the welds up if they weren’t so bad :/ loved the rest of it but that just made me cringe
@MrCarnutbill67 3 жыл бұрын
The process for making the handle was genius. I’ve been killing myself trying to hand file both “sides” identical. Starting round and then flattening 2 sides is so much smarter. Thanks for the tip!
@theeddorian 2 жыл бұрын
Very nice work. I like my UK-made Thor replaceable face hammer as well. The faces are threaded and you can have different hardnesses on opposite ends of the head and a mix of extras that can be exchanged as needed.
@CamaroMann 3 жыл бұрын
9:41 - "making sharp edges". Oh, you couldn't resist, could you :)
@chw0112 3 жыл бұрын
Can't wait for you to do a collaboration with a welding company so you can learn TIG!
@mymechanicsinsights 3 жыл бұрын
That would be a dream come true!!
@macbaar6073 3 жыл бұрын
Stahlwerk 👍👍👍 mit Onkel Jann.... in der CH ist diese Marke nicht 😢 vertreten.... 🤗🇨🇭
@joachimkiesler4580 3 жыл бұрын
@@macbaar6073 Stahlwerk ist jetzt mit ohne Onkel Jann, oder er ohne Stahlwerk. Denke, das hat ihn aber mehr getroffen. Wieso nicht in der Schweiz? Hab Stahlwerk Werkzeug sogar bei Amis gesehen.
@macbaar6073 3 жыл бұрын
Joachim Kiesle🤗 Ich meinte die Videoserie mit OJ, in der er die Stahlwerkgeräte vorstellt und so... ich hab die Scheidung nicht mitbekommen, hatte andere Verpflichtungen. Auch Manfred Welding oder Weldinger macht gute Vids für Anfänger wie mich... 🤗🇨🇭 und die Geräte habe ich in der 🇨🇭 nur Einzelimporte gesehen.... 😢
@macbaar6073 3 жыл бұрын
Schweisserkurs Migros Klubschule? 😜🤣😂👍👍👍🤗🇨🇭
@looiegreen5518 3 жыл бұрын
Being from Chicago, I loved seeing the Beverly Shear, that you so lovingly restored. It's beautiful!
@mymechanicsinsights 3 жыл бұрын
I love it!
@DavidRutten 3 жыл бұрын
That wedge is a work of art.
@ralfweber7562 3 жыл бұрын
This is absolutely stunning! By the way: the world is in absolute disorder. Could you please make a new one? :-)
@monkeygraborange 3 жыл бұрын
If anyone could it would be him!
@expatmoose 3 жыл бұрын
If everyone liked and subscribed we may have a chance,,,, let’s hope he sees this👍🏻
@Danbatio 3 жыл бұрын
With less sharp edges, if possible.
@DanielCurti 3 жыл бұрын
Best comment ever!👍🏻
@ytwos1 3 жыл бұрын
Please restore, keep as much of the original that is still good.
@misterpatina 3 жыл бұрын
You’re like a pretty precise MacGyver with a lathe. Perfect job bro! ❤️
@mymechanicsinsights 3 жыл бұрын
A lathe would have made his show definitely better, just imagine 😅 Thanks Mr. P.
@rana1974 2 жыл бұрын
My Mechanics, you are perfect. Thanks for everything.
@vituaugusto1635 2 жыл бұрын
You know the world is about to end when this dude is making sharp edges
@jermainewashington7447 3 жыл бұрын
Beautifully filmed and edited. Every shot is so clean. The close ups are so good.
@mymechanicsinsights 3 жыл бұрын
Thank you very much Jermaine, I'm glad you like it :-)
@pjhalchemy 3 жыл бұрын
Totally agree!
@rewlazman 3 жыл бұрын
Not only does my mechanics make new ones, he's a master cameraman and editor.
@99.6survivalrate4 3 жыл бұрын
Perfect as always down to every tool cleaned spotless between uses. That lathe had not one spec of sawdust, metal or oil buy the time you got to the nylon. Impressive!
@mymechanicsinsights 3 жыл бұрын
I actually made the nylon heads before the handle in real life ;-) but yeah, obviously I cleaned the lathe accurately after making the handle.
@MrArray1967 2 жыл бұрын
Absolutely beautiful dead blow mallet.
@desi_the_duck Жыл бұрын
This video was wonderful, both to watch and to hear. I fell asleep 6 times ❤ I will be saving this one to watch again and again in the future. Thank you.
@jakeleddy5776 3 жыл бұрын
I just got out of surgery and I’m going to watch every video you made while I’m stuck here
@mymechanicsinsights 3 жыл бұрын
Get well soon, all the best! Thank you very much
@criggie 3 жыл бұрын
You're in for a treat. Binge-watching something new, that has a decent back-catalogue, is fantastic !
@MetalRestorationBho 3 жыл бұрын
Great my friend! This is a masterpiece. Congratulation from Vietnam.🙂🙂🙂
@huylam3951 3 жыл бұрын
I from Vietnam 🇻🇳.
@charlvanniekerk8009 2 жыл бұрын
The machining in of itself is remarkably well done and your execution is stunning! Thank you for sharing!
@mariaroldan4200 Жыл бұрын
How did I miss this? I am so glad it showed on my feed! 😘
@pavelengstrom2926 3 жыл бұрын
That wedge was *chef's kiss*
@BB_Chaptsick 3 жыл бұрын
It is amazing to see how much thought and work goes into what is a “simple dead blow hammer.” I, like so many others, thoroughly enjoy your content.
@TopHatTITAN 2 жыл бұрын
Anything made by the Swiss is always great
@teddyenriquez3429 3 жыл бұрын
Cheers! This is the advantage of a very skilled and talented mechanic who has the needed equipment, tools and materials - you enjoy watching his work and appreciate the quality of the end product.
@mymechanicsinsights 3 жыл бұрын
Thank you very much, I really do appreciate it :-)
@peterc2248 3 жыл бұрын
Perfection as usual. Personally I'd never use the tool, I'd just hang it up, look at it and drool :-)
@koenvanderrijt5244 3 жыл бұрын
Such a cool build! So happy when u pop up on my feed!
@jeremycole2036 3 жыл бұрын
This is the nicest dead blow hammer to have ever been made.
@mymechanicsinsights 3 жыл бұрын
Thank you very much Jeremy :-)
@SCENES_THAT_I_LOVE 3 жыл бұрын
Man.. you're a god when it comes to this.. i have seen so many videos but ur way of making tools is so peaceful. 🙏
@Chevroletfan123 3 жыл бұрын
Well done!
@mymechanicsinsights 3 жыл бұрын
Thank you very much :-)
@Aiviymatoc 3 жыл бұрын
inserting those nylon heads was so satisfying
@monkeygraborange 3 жыл бұрын
Wasn’t it though?
@undefinierbar 2 жыл бұрын
Viewing this video the second time: "Making sharp edges" is self-referential humor which i love. 😉
@YouWillNeverKnowMan 3 жыл бұрын
It is so cool to watch you use tools from previous videos.
@criggie 3 жыл бұрын
Dude - this is taking "I make a new one" to a whole `nother level !
@raygranita8756 3 жыл бұрын
Congrats man! next upload will be PB Swiss Tools Manufacturing factory visit 😁😁😁
@mymechanicsinsights 3 жыл бұрын
PB Swiss Tools actually invited me to see their factory. It was very impressive to see it. They make all their products there, 100% swiss made.
@raygranita8756 3 жыл бұрын
@@mymechanicsinsights that must be awesome to see. Wishing you to have more sponsored videos with them. Congrats again. 😉😊
@hugoschmeisser2484 3 жыл бұрын
100s of videos on KZfaq of guys forging hammers and my mechanics builds the most overly engineered hammer I've ever seen. this guy is an artist
@foxdawnstar5405 3 жыл бұрын
King of the metal shop!!!
@juancarlosgonzalezcarballo1368 3 жыл бұрын
One more time, absolutely perfect.
@PureRushXevus 3 жыл бұрын
Oh, yesss. Why do I always get so excited when I see a new my mechanics video come up :D
@isabelle070209 3 жыл бұрын
Toujours impressionnant comme il n’y a plus la moindre trace de soudure. Vraiment magnifique. Bravo.
@TJ-vk5qk 3 жыл бұрын
One of the most skillful guys I’ve ever seen.
@mymechanicsinsights 3 жыл бұрын
Glad you like it :-)
@kahutochishisumi9056 3 жыл бұрын
Your mastery over your tools, your eye for detail, your uncompromising quest to attain perfection and the level of cleanliness of your work, tools and work environment, makes what you do incomparable and inimitable. Thank you, from Nagaland, India.
@mymechanicsinsights 3 жыл бұрын
Thank you very much, I really do appreciate it :-)
@trevortamboline279 3 жыл бұрын
Completely agree. The best out there.
@AdrienKooyman 3 жыл бұрын
One of the most underrated fabricators I've ever seen. Thank you for the content you create. I love your videos.
@muhammedibrahim8063 3 жыл бұрын
It's absolute joy watching your work !! From Egypt
@viggenzz 3 жыл бұрын
love how you treat everything like steel
@VeradonaRestoration 3 жыл бұрын
The result is perfect, thanks! Radek
@fredadd 3 жыл бұрын
Really cool way to save $50! Make your own! Great work as usual MM.
@mymechanicsinsights 3 жыл бұрын
Haha, not so sure about that ;-) Thank you very much as always
@danl.4743 3 жыл бұрын
lol. Works for me. I will spend $100 and 50 hours of work just so I don't give somebody else my hard earned $50!!! Yeah baby!
@mymechanicsinsights 3 жыл бұрын
@@danl.4743 haha, pretty sure he was joking ;-)
@Helio4k 3 жыл бұрын
I must say this belongs in a Museum beautifully
@MrSmith_ 2 жыл бұрын
You are a true craftsman. All that's left is your maker's mark.
@mymechanicsinsights 2 жыл бұрын
Many thanks :-)
@Balaganesh 3 жыл бұрын
It would be great if you could also share how you design and calculate measurements before starting to work on them.
@bjstewart211 3 жыл бұрын
Looks like he bought a brand one and used their dimensions, but I totally agree I’d love to see measurements for everything
@B5Blue1968 3 жыл бұрын
What an incredible job my friend! That wedge was a piece of art! When I tell my friends about your channel, I always tell them you have mad machining skills and that piece proved it IMO. My dead blow hammers are filled with lead shot, never seen ones with metal disks. Also never saw you hand turn wood on your lathe, great job! "Making sharp edges" you are so meticulous about deburring everything, this had to hard for you to put sharp edges into a piece LOL, again an absolutely beautiful tool.
@mymechanicsinsights 3 жыл бұрын
Thank you very much :-)
@EpiphoneShredzzzzz 2 жыл бұрын
I thought the same thing lol when I read the subtitles I was like, wait a minute.. I had to rewind to make sure I read it right lol
@LimabeanStudios 2 жыл бұрын
your comment about the wedge made this video quite dramatic for me. I spent the whole time pre wedge excited to see what he was gonna do. I was honestly a bit confused on exactly how it was gonna work until it was done
@hasserecht3678 3 жыл бұрын
Perfect craftsmenship. Thank you for showing.
@liamconway9281 2 жыл бұрын
Pressing the nylon heads into the hammer was the most satisfying thing.
@klausstock8020 3 жыл бұрын
Everyone: likes to have the tools for the job. My mechanics insights: likes to have the right tools to build the right tools for the job. - And the skills.
@mymechanicsinsights 3 жыл бұрын
haha good one ;-)
@PapaSchultz74 3 жыл бұрын
Making the tool to make the tool that makes the tool. Are you working at SIG?
@filin2508 3 жыл бұрын
Красота!!!!👍👍👍
@richardratliff9436 3 жыл бұрын
That wedge is a thing of beauty
@PabloP169 Жыл бұрын
It is amazing what you can do when you have the time and the right tools.
@marcconroy4631 3 жыл бұрын
Wow, you did a beautiful job! I have one of those PB Swiss dead blow hammers myself and they are a great tool. Thanks for taking the time to put this together!
@mymechanicsinsights 3 жыл бұрын
I love them too :-)
@irishwristwatch2487 3 жыл бұрын
"Making sharp edges" Oh god it's here. The first horseman......
@txikitofandango 2 жыл бұрын
the way you photograph all the work on the lathe is clear and beautiful
@txikitofandango 2 жыл бұрын
all the photography is excellent but the turning parts are especially pleasing
@georgetargachoff1745 3 жыл бұрын
awesome beautifully done hugs from Canada
@user-ih3hw1uq2m 3 жыл бұрын
Добрый день, механик. Это круто, это класс. Превосходная работа. Спасибо за видео.
@aleksandrkhodzynsky9783 3 жыл бұрын
а что это ?
@XDFreakLP 3 жыл бұрын
"Grinder and Paint make me the welder i aint"
@SurvivalInFlames 2 жыл бұрын
I notice he didn’t “heart” this comment lol
@ferdblu1946 2 жыл бұрын
@@SurvivalInFlames lmao
@stuartmcmillan2518 3 жыл бұрын
That wedge is a work of art
@Neris-of-the-other 2 жыл бұрын
Using a restored beverly shear to make a mallet that will probably be used in the future restoration projects is a power move
@MrTheBigNoze 3 жыл бұрын
There's a reason why this is one of the best restoration/making channel on KZfaq! Superb work
@mymechanicsinsights 3 жыл бұрын
Thank you very much, I really do appreciate it :-)
@user-nj3tk4sq6i 3 жыл бұрын
Браво маэстро👍
@Israfel36 3 жыл бұрын
I love that you still use that metal sheer, man.
@FrietjeOorlog 3 жыл бұрын
I like how a lot of the tools you use are your previous restoration projects.
@babthooka 3 жыл бұрын
Nice! :)
@mymechanicsinsights 3 жыл бұрын
Thank you :-)
@MRNVCDIY 3 жыл бұрын
Nice video. Good tool
@jaybee8581 3 жыл бұрын
It's so good to watch items being made "without" a computer. I love everything you have made or restored, such a master craftsman at work. TOPS!!!
@torrential_sunshine5679 3 жыл бұрын
It's a pleasure watching you transform rough materials into tools; they're art and function rolled into one
@anantsaiasthana2643 3 жыл бұрын
big gasp as I read "Making sharp edges"
@remibergeron4505 2 жыл бұрын
You manage to give the "feeling of perfectness" (sorry i dont even know if its a word lol i speak french) trough your video its crazy. Its interesting, mind boggling, fascinating, surprising, instructive, inspiring. Im a young conventionnal machinist and woodworking enthousiasm. So your video is just perfect for my learning. Thank you very much and I wish you many more years of passion and challenge!
@joshuarosen6242 Жыл бұрын
The English word is perfection, a word we obviously borrowed from French.
@ChaosWolf1985 2 жыл бұрын
Als Zerspanungsmechaniker kann ich eins sagen. Schöne Arbeit. Der lange Griff ist perfekt!
@Ramn8tr 3 жыл бұрын
Now I need to find a US dealer. These guys have some nice tools on their website. Well done!
@mymechanicsinsights 3 жыл бұрын
Should be no problem as they're available all around the world ;-)
@nathanbinns6345 3 жыл бұрын
"making sharp edges" Well no wonder this video had to go on your secondary channel!
@joannaatkins822 3 жыл бұрын
This brought me back to my first "complex" project as an apprentice, a mallet with a nylon and aluminium head. I still have it safely tucked away because I was too fond of it to use it. Your deadblow hammer is simply beautiful work, and it says so much about the automation of products. Your deadblow would be extremely expensive in man hours and materials, but for the price of a nice dinner a company can build them en mass for a perfectly serviceable quality tool. I like yours better, but the other is still decent
@ForeverWog 3 жыл бұрын
I love that you use the shearer that you rehabbed!
@nnsteven 3 жыл бұрын
Mate, your productions - either manual or the resulting visual are the cream of the cream :-). Beats the best of the best available on the Net. There should be a KZfaq Oscar, no contest regarding the recipient! Admiration, Congratulations and many thanks - from Australia...
Dharni
Рет қаралды 151 МЛН
my mechanics insights
Рет қаралды 566 М.
my mechanics insights
Рет қаралды 475 М.
my mechanics insights
Рет қаралды 1,7 МЛН
Robinson Foundry
Рет қаралды 3,3 МЛН
my mechanics insights
Рет қаралды 749 М.
Steve Ramsey - Woodworking for Mere Mortals
Рет қаралды 126 М.