I’d love to see a tutorial for the control side of things! I’m in the middle of designing a small table for my garage and could use any help I can get.

said it before but i just want to drive it home.... I watch a ton of different DIY channels on YT, this right here "Cranktown City" is by far the most fun and engaging to watch. I love your humor and the "we´ll see" attitude you bring. I understand the ammount of problemsolving and grind that goes into the build that just dont get on film, i am amazed at the speed of wich you blast through these projects. Be safe and keep the spirit up brother

It is crazy to me that you only have so many subscriptions. Your projects are amazing and complex, and your videos are so fun to watch. Hopefully more people will get to know you soon. Greetings from Poland.

Yep and yep. Looks to be an interesting build, and definitely along the lines I've been thinking for a dual role (steel and dead tree carcass) small footprint machine for myself. I just hadn't got past the dream it up fully stage quite yet. Seeing your design gives me hope, and the answer is as above for both questions.

I can design my own CNC but a lynx video would be great. You explain things weirdly well

A CNC tutorial would be nice, but these Build Log style videos are also an absolute treat.

I'm building a small desktop CNC machine right now. That's how I found this video. I had to subscribe just because your channel on fabrication made me laugh more than any other. I think you are the master of fabrication zen. At least on video you are. Got to love when somebody takes so many problems in stride and just forges ahead. Thanks for the entertainment. Good stuff.

Just wanted to say that I'd love to see a little more detail about the programming and electronics side of your projects.. I wouldn't say go full nerd cause there is plenty of that out there.. I like the fact that you let your mistakes show and I'm glad you made the choice to "lower the bar" I let perfection stand in the way of starting a lot of my own projects and watching you jump first encourages me to loosen up and do a thing regardless of it being right the first time! Keep at it!

Very big YES for ghetto tutorial on electronics and setup on linux cnc

Duuuuuuuuuuude Yes to both. You really hide your genius really well but you don't fool me hahahaha. Great work sir and funny as all get out.

What a great ending! Bring on the rest 👍👍👍👍👍👍

The big part is all the drive parts on these tables make peoples head spine .just keep going your great I really liked your video it showed what home shops can really do. 👍👍👍👍

Great video. Nice to see that the best laid plans may still have a small flaw. It teaches people that even if you think it's perfect, some minor thing can make a mess of the plans. Oh wait... you said you weren't a role model... I think you're a perfectly good role model! I suspect your solution to the problem will be ingenious!

Well you got part way. Never seen a leany one before. Interesting for sure!

A bit late but. Put some caster on a pallet. Iv moved all sort of stuff on the one i had. Also made a 2x4 frame tall enough to almost be level with my pickup. Made it east for me to drag an engine from the truck onto it and roll it onto my shed.

Keen to learn a bit of foundational knowledge about LinuxCNC. Cant think of anyone more entertaining to learn it from.

I'm a garage fabrication guy too, due to my "no room" problem my driveway becomes part of my shop....I subscribed

I just don't understand how you haven't reached 100k subscribers yet. Awesome content. Thanks for making great stuff.

Heck yeah id love to get a hold of plans for this! This could also work with wood for a wood cutter! A series on how to set up the electronics would be very helpful indeed! Either way, love your videos! Im drooling over this new cutter your putting together!

I’m glad you upload videos more! I look forward to all of them!!!

Yes to plans. Love the floor space saving design. Thanks for sharing

Stop everything! Cranktown City uploaded a video! We gotta watch it now!

Yes please. Do some tutorials. Electronics and the plasma cutter head assembly. Just go a bit deeper in the explanation. Keep up the good work.

Dude! That's such a clever way of going about this. Will definitely keep this in mind.

awesome video, standing the table upright is a win

What you are doing is amazing, everyone should strive to be this resourceful and smart.

Love it, looking forward to seeing the second part!

omg I lost it when you were saying goodbye to the old machine

YES TO BOTH! Please! That'd be awesome. :D

Nice one!

Awesome stuff! Thanks for making these videos!

My Grandpa used to build a lot of things without making any drawings. He also had gnarly hands. Anyhow planning everything out ahead of time works theoretically, and then when you do it... well these things happen. It happened plenty of times out on the construction site. I am sure you will find a solution, you are a smart guy.

A tutorial and plans WITH the mistakes! Awesome video.

awww happy middle indeed cant wait for the next vid! YES I WANT THE PLANS! And I'd gladly send some dingers your way for them too brother

Old school diy style rules; great stuff

I see how much work it is to make a CNC Plasma Cutter, and for sure, if I ever need one, I'll just buy one. I don't like suffering

You are both knowledgeable and funny! I've liked and subscribed and I'm starting your next video on this build. I'm a licensed Machinist with an abundance of CNC experience. Notice how I haven't been condecending? LOL Any ways, you are very entertainging. I hope you make more build videos!

Please don’t stop what you’re doing, you’ll get the recognition you deserve some day.

You are criminally undersubscribed, this video is amazing.

At long last someone has built a vertical plasma cutter that will take up a back wall and not half the shed ,cant wait to see how it works . I ve looked at nearly ever cnc build on KZfaq and yes how much for the plans .

Love it bro! Looking forward to the next installment!

Just amazing videos that everyone can relate to keep up the good work.

Looking forward to your next video on this plasma table and seeing how it turns out. I am building a cnc 4x4 plasma table. Was going to make it over size and make a support so I can put a full 4x8 sheet on it so it hangs off the end and is supported but actual cutting will be 4x4. Going to be rollers on the edge to I can move the sheet in as needed. That is the plan anyway lol. Got everything ordered, Everlast PowerPlasma 82i, got here yesterday and I made a few test cuts. Using 1700mm/66 inch linear rails, arriving today. Figure that should give me a true cutting area of 4x4 plus, but we will see. I will have to see how long the included ball screws and rail trucks/bearings actually are and see what my true cutting zone will be. I was going to use 1500mm but up sized at the last minute. if it is way to big I can always cut down the rails and ball screws.

That’s a great video, ! Hope to see more and finish this ! I agree don’t understand why not many more subscribers.

I wish your channel had millions of subs, your videos are the only ones I dont find boring on that platform. Youre my top1 😂

"Don't worry about the mess, it helps me concentrate"... Same here

Great video! Love your content!

As always, very fun to watch. The goodbye scene was priceless!

Yes please to the plasma Linux CNC tutorial and the electronics. Also would be interested in the plans.

Your TIG welding skill is definitely getting better.😊

Yes to both those things. Love the vids brotha, and a tutorial vid would be awesome ! Keep up the awesome content 💪

Fully interessted by tutorial by you about electronics for this kind of project

Yes and Yes. Great work!

Great job is always brother🙏 .Good work 👏. Keep em coming. Always worth a watch

This is the kind of content I love!! ❤

Nice work!! Yes, I would love to get your plans and Yes, I would like to see a tutorial on the wiring & setup!

Hell yeah! make the tutorials! I wish I had more videos available on how the electronics and software work

I love the edits and jokes. Also this is a cool build so far. As far as tutorials, I personally can't build this, but I live learning about it so will probably watch anyways just in case.

Never seen a cutter like that looks great 😀

I’ve been waiting for this series!

Fantastic and entertaining.

Yes and yes! Subscribed! Let’s see those plans!

Montage is superb

Great job man. Fellow Arizonian here… keep up the good work. I’d watch you do a tutorial. I’d probably buy the plans/fusion files if they were parametric so I could size the plasma cutter to a size that fits my needs!

lol the blanket scene was perfect.

I would love the Linuxcnc tutorial. With that said, I am sure there are a bunch of people who would buy the plans. The nice thing about plans is that someone else did the thinking and mucking about.

Hilarious commentary 😂 fantastic video. Looking forward to the complete build. And yes, one day I'd like to make my own CNC plasma. Would love to buy your plans..

Yes on the linux cnc, thinking of doing an upgrade myself...

Hey mate I think a quick video for you would be to make a system like with your Drills to remind you to turn your gas off

Yes definitely want a tutorial on the electronics, would buy that over the plans at quiet the premium!

Hilarious montage combo! +1 power level unlocked

Cranktown City is hands down the best DIY channel on youtube, prove me wrong (you can't)

Just stumbled onto your channel. Yes, I would buy reasonably priced plans, and yes I would love to see a tutorial on the electronics side as well.

yes on the Linux CNC. how do you plan on dealing with the smoke? I saw some people make a down draft table using one of those 6inch in line duct fans but their table was like a third of the size of this. love the idea of the plasma table being on its side. really cuts down on the space it takes and probably make placing a heavy sheet on it easier. might be problamatic with parts falling behind the sheet as its cutting. might need to design the parts to leave tabs so they need to be tapped out once the job is finished.

Ofc we want more of you. Tutorial or rant

I have watched several of your videos and have come to the conclusion that you sir are, A: a genius B: nuttier than a squirrel turd C: Both. Whatever the case may be, I'm really enjoying what I'm seeing. Keep it up.

I think the tutorial/documentation for the control side of stuff would be obscenely valuable. I don't plan on building one anytime soon, but how you mentioned there wasn't a whole lot of pertinent information out there is all the reason to add it. We've all been in that situation where we're scrounging through the googler looking for an answer to a specific question and finding nothing. Or rather seeing that one forum post with 7 replies and our hopes get dashed once we realize it's 1 post from OP and 6 others from other people wondering if they ever found and answer to the question.

thx man, amazing video + entertainement

You can even use plywood for some parts! It's much easier to work with

This reminds me why I now add all the nuts, bolts and screws to a 3D model on parts that move. You are doing a grate job as you always do. I love the way you have put it on its side, but I think you may need a Screw instead of the 10mm Timing Belt, when the power to the stepper motor is turned off, the trolley may drop to the floor. Perhaps split the aluminium part in two so you can spread those pieces apart, leaving a gap for the rollers on third rail.

Brilliant! Aluminium though… not elumnum! You deserve waaaaay more subscribers!

Yes, I would love to see your Linux CNC tutorial! Thanks again for making these entertaining videos Viking. Appreciate it! (I said Viking 'cause you sorta look like a Viking.)

Plans! Tutorials! Yes!

I am very interested in plans for a table like this. I don't have a shed or garage, but i might get one in the new house. I love watching your videos. You, Sir, are my spirit animal.

Would love to see your CNC tutorials!

This is such a good idea for space constrained shops. I've seen slant bed wood routers and wonder more than once why I've never seen a slant bed plasma table. I thought there must be a problem with cut parts sliding.

'Not the copper bro!' Lol Another great video man 👍

you are the best friend your mean of explain its very enjoy and interesting

I would definitely like the plans even though I won’t be building one for years.

Having bought two sets of CNC plasma cutter plans (and built 0 CNC plasma cutters), I'd probably buy a set of plans. Also yes, please, to the control side tutorial!

It's cool, I support the channel and activities.

Cranktown, Cranktown City Its a good job! let it be often ♫♫♫

I'm working on a mpcnc plasma. It's about the size of your first one. I'm using it as a learning experience until I can fit a lager one.

Yes to the tutorial!

100% on a linuxcnc tutorial! Would watch several times

Umm... HELL YES I'd be interested in the plans! Also, def interested in the setup of the electronics and firmware/software.

the easiest finish for aluminum is throwing it on a gravel ground and stepping on it a bunch and throwing it around, and putting it in a sack with rocks and tossing it down the stairs for an hour.

Bailing wire is an underrated building material.

this needs a ton of thumbs up

Just stumbled across your channel. Love the vid. I aspire to make my own CNC someday and would love a how to on the electronics. One of the things I’m unclear on is the options with the controller/driver or whatever it’s called. Seems there are many options but I don’t know which is best for a particular system. New subscriber!