Making a hydrophone

Рет қаралды 10,491

Reba Darling

8 жыл бұрын

Пікірлер: 25

@Isalys555 7 жыл бұрын

nice to see a woman involved in DIY ! keep up the good work! I'm planning to build a ROV with hydrophones :)

@victorvosen2898 5 жыл бұрын

Made one per your instructions... with a rockband mic.. a condensor mic that was taped that I dissambled and sprayed and reassembled. 3.5mm jack.. with 1/4 inch mono-plug adapter for my amplifier and recorder. The whole thing rubber seal- coats onto the (actual) condensor assembly(whole) and it worked just like your piezoelectric mic(whole part)! Thanks RebA! Come by the inland n.w. and I'll buy you a beer! I second it, You Rock!

@rebadarling9461 5 жыл бұрын

Victor Vosen That’s fantastic!! I’ve been wanting to try it with a condenser mic. How do the lows sound? They’re pretty non-existent with the piezo. Any chance you’d like to let me hear the recording/s you made with it? Thanks for watching and for sharing about your mic!

@victorvosen2898 5 жыл бұрын

they're ok, but I couldn't bring them out very much so much of the highs, so I put a low-pass filter on 8000 khz? and it brought them out more drive.google.com/open?id=18bDD1uBXkZYasTFzqk8irSQHU6iekiMq It was on a gravel beach, so there's a lot of rockin action that banged the mic. 10min

@appukrishnan1815 5 жыл бұрын

Great video! You should do more.

@YvonneRaphaelWriter 4 жыл бұрын

I love the goofy!!

@wufffwuff 5 жыл бұрын

Great video! Informative & entertaining :D

@DHOWSR4DEEPDEPOT 5 жыл бұрын

Cool stuffz

@solaguafansoficial2444 5 жыл бұрын

U rocks !

@telharmonium 2 жыл бұрын

May I ask how many coats you put on it?

@Signcutter 7 жыл бұрын

It looks like you have a really big hydrophone in the sink.

@mjohnmoros 4 жыл бұрын

Dang! Mad respect.

@hollybaynham8257 6 жыл бұрын

Gonna try this out.

@kevinmatthewspiano 6 жыл бұрын

you're wonderful :0)

@kevinmatthewspiano 6 жыл бұрын

I was giggling and learning. A wonderful combination. Thanks. just about to head off to record some tigers hopefully. Ciao ciao meow meow x

@rebadarling9461 6 жыл бұрын

Thanks! I would love to hear your tiger recordings! That sounds really exciting!

@davidmam 3 жыл бұрын

Would self-amalgamating tape work better for sealing the joint?

@scottarmstrong8585 7 жыл бұрын

no respiration or fan in that small space + aerosol leak sealer = carcinogenic chamber.

@thejawshop-AdventureRecording 4 жыл бұрын

Very cool idea, how does the contact mic pick up bass underwater?

@rebadarling9461 3 жыл бұрын

The bass is almost nonexistent, sadly.

@peterpeper4837 2 жыл бұрын

@@rebadarling9461 You ll need a piezo preamp with at least 1Mohm ideally 10Mohms input impedance to get those bass frequencies. The zoom can not provide that and does not load the piezo properly resulting in the loss of bass.

@rebadarling9461 2 жыл бұрын

@@peterpeper4837 Thank you!