No video
Making a Laser Cut Puzzle in Lightburn!
Рет қаралды 35,187
Күн бұрын➡️ Click on Show More↙️for the LASER RAFFLE and other Links!
The Raffle you've all been waiting for! The LaserMATIC 20!
➡️ lahobbyguy.com...
Get a chance to win the King of the Diode Lasers!
The Roly Automation Facebook Group:
/ rolyofficial
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
The Laser I use most frequently, The Roly LaserMATIC 10: King of the Diode Lasers!
➡️ amzn.to/3oIzOzp
AVAILABLE NOW ON AMAZON!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutf...
/ lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Need to message me? m.me/105768145...
Check me out on Rumble! rumble.com/c/c...
=======================================
👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
If you're looking for a Co2 laser, use my exclusive discount code!
This code is good on all laser website purchases at www.gweikeclou...
➡️ Coupon Code: LAHOBBYGUY
(Coupon code not valid on pre-orders of new products)
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com...
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com...
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com...
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
=======================================
THE MOST REASONABLE DIODE LASER COMPLETE PACKAGE AVAILABLE!
👉 This is a special VIEWER ONLY package deal!
🔗 lahobbyguy.com...
Laser, Roller Accessory, Enclosure & Honeycomb Bed! $465!!
Take an ADDITIONAL 7% OFF with
Coupon Code: ➡️ HobbyGuy
=======================================
I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/laho...
=======================================
Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com...
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com...
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
www.walnutroad...
info@walnutroadwood.com
➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
➡️ Ocooch Hardwoods:
ocoochhardwood...
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/...
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero
@TheLouisianaHobbyGuy 2 жыл бұрын
I love making puzzles! This will walk you through it without missing ANY steps!
@keithleeth9768 8 ай бұрын
Hey boss. I’ve went through your video several times. Got the puzzle lib downloaded. But when I open any of the puzzles in lightburn, the puzzle pieces are not double lined like they are in the video. I’m not sure if I’m missing something, or if I downloaded the wrong file?? 🤷♂️ but I downloaded every file you gave on your site yesterday (12-12-2023) Any help would be appreciated. Thanks
@lpaltageek Ай бұрын
Thanks for all your suggestions on cutting a jigsaw puzzle, operating from the controller. Today I manage to cut a jigsaw puzzle with engraved photo grabbed from the Internet. The actual engraving is not up to par, but the picture was of a couple strolling in the rain. Very cloudy day picture.
@TheLouisianaHobbyGuy Ай бұрын
Glad I could help!
@LarryDMitchell Жыл бұрын
I watched this video before but was a newbie and figured this was beyond me. NOW, I watched it again and see some perfect personalized Christmas presents for the grandkids. I love the tabs/bridges function which is a BIG help. Great video Rich.
@TheLouisianaHobbyGuy Жыл бұрын
Glad you enjoyed it!
@ersheriff 3 ай бұрын
Dónde está la descarga para hacer los puzzles?
@Simon-tn7vw Жыл бұрын
Thank you so much. I bought my first laser engraver and this helps me so much to save a lot of time and i learned a lot in this short and easy explained tutorial.
@TheLouisianaHobbyGuy Жыл бұрын
Glad it helped Simon.
@LonMcClure 2 жыл бұрын
Another great tutorial! I've been thinking of making a family portrait puzzle for my mom who is in assisted living. She loves puzzles!
@TheLouisianaHobbyGuy 2 жыл бұрын
I'm sure she would love that Lon! 👍
@yvettereynolds5945 8 ай бұрын
❤❤❤thank you so much, I just made my puzzle with acrylic transparent.
@TheLouisianaHobbyGuy 8 ай бұрын
Wonderful Yvette! These are fun to make!
@martinfields373 2 жыл бұрын
I'm so glad I stumbled across your channel. Great info in a concise, comprehensible format. Awesome work. Thank you so much.
@TheLouisianaHobbyGuy 2 жыл бұрын
*Awesome,* thank you Martin!
@georgechambers3197 2 жыл бұрын
Brilliant, I've tried puzzles before but always had too much trouble. This will make it so easy I guess I'll have to try again. 😁 Thanks for the video, great to have you back!
@TheLouisianaHobbyGuy 2 жыл бұрын
Definitely try it again George! It's one of my favorite projects for the grandkids and they love them! Good to be back! ✔
@schlotdoglaser 2 жыл бұрын
I just learned something new.....never knew about the tabs. Rich....you da' man!
@TheLouisianaHobbyGuy 2 жыл бұрын
Thanks Keith! Oh, and there's so much more to the tabs and bridges! I left most of it out for another video!
@TheFalconJetDriver Жыл бұрын
Rich Lightburn should be paying YOU! You are a wealth of information! Or I guess so many of US that use Lightburn are un willing to read the documentation! I will say it is a lot to digest.😁🛫
@TheLouisianaHobbyGuy Жыл бұрын
I wish! One at a time makes it easy to learn.
@lpaltageek Ай бұрын
@@TheLouisianaHobbyGuy I am 84. Worry not about a President's age, just his experience.
@bidondolbaeb Жыл бұрын
Добрый день. Спасибо огромное за простое и наглядное руководство. Хочу заметить, что при резе элементов пазла простой линией, тоже результат отличный.
@TheLouisianaHobbyGuy Жыл бұрын
Yes, a single line is best, thank you!
@yvettereynolds5945 2 жыл бұрын
Tabs safe so much aggravation and save thy acrylic works , lightburn is the best software I own , thank you
@TheLouisianaHobbyGuy 2 жыл бұрын
*Great to hear!*
@rebeccareulet3016 2 жыл бұрын
Thank you so much. I will be back to review this one again.
@TheLouisianaHobbyGuy 2 жыл бұрын
Thanks Rebecca!
@drasus233 2 жыл бұрын
Glad you're ok and back! Awesome videos!!
@TheLouisianaHobbyGuy 2 жыл бұрын
Thank you Doc! Glad to be back! 👍
@shadowliving6858 2 жыл бұрын
Can’t wait to make some puzzles.
@TheLouisianaHobbyGuy 2 жыл бұрын
Awesome! Everyone that sees them wants one!
@andytaylor8802 6 ай бұрын
Hi Rich. Have you ever tried cutting white sublimation ready 3mm plywood. I am wondering if it burns or not the white Sub coating.
@TheLouisianaHobbyGuy 6 ай бұрын
No Andy, I have not personally, but other people have!
@patrickobrien4266 2 жыл бұрын
Always look forward to your videos...the best I've found !
@TheLouisianaHobbyGuy 2 жыл бұрын
*Wow, thanks Patrick!* 👍 So glad to hear that!
@timhaley7383 Жыл бұрын
As always a GREAT video. I can not wait to try this. Thanks.
@TheLouisianaHobbyGuy Жыл бұрын
Have fun Tim!
@Bandit-di3pi 2 жыл бұрын
i was wondering what happen to you not heard from you in a while .....glad all is well and you are back to some what of a normal life and back up and going .....as always great videio and i will give it a try and see what happens
@TheLouisianaHobbyGuy 2 жыл бұрын
Thank you Mark! You can't get rid of me that easy! 😁
@Azarathification 6 ай бұрын
I've only done one jigsaw myself, it was one of the single line cuts as opposed to double that you show, and I found with kerf pieces were too loose. Wouldn't this shown here make the gaps between pieces even more pronounced?
@TheLouisianaHobbyGuy 6 ай бұрын
Yes, I use the single line now as well.
@andytaylor8802 6 ай бұрын
@TheLouisianaHobbyGuy Have you altered the puzzle files on your website then Rich?
@warriors475 2 жыл бұрын
hi there Rich good video just wondered if you could make a video on actually making the pieces step by step so i can create my own puzzles would like to learn and you make your videos so easy to follow thanks and hope you can find time to make the video
@TheLouisianaHobbyGuy 2 жыл бұрын
Yes Sir! It's on my list, probably a February video.
@yelenavanoorschot3248 2 жыл бұрын
Wonderful video! Thanks!👍
@TheLouisianaHobbyGuy 2 жыл бұрын
*Thank you! Cheers!* ✔
@ronaldderi7471 5 ай бұрын
Are there more complicated cuts for puzzles that don't have the same common shapes?
@TheLouisianaHobbyGuy 5 ай бұрын
You can create your own!
@ronaldderi7471 5 ай бұрын
Mecpaw coming in Friday, will set up and start free trial of Light Burn, then add lib files and burn my first image. I have my mind set on a kinetic sculpture at some time in the future. Thanks for the reply.
@HewAndAwe Жыл бұрын
The requested URL or webpage address /product/lightburn-puzzle-templates/ was not found.
@TheLouisianaHobbyGuy Жыл бұрын
engraveandcutfiles.com/?product=lightburn-puzzle-templates
@kimhendrickx5877 10 ай бұрын
How do I make my own puzzle patterns in Lightburn that have to be cut twice?
@TheLouisianaHobbyGuy 10 ай бұрын
Try posting on my free forums Kim. lahobbyguy.com/bb I can't answer that in a comment.
@ricknutz7139 10 ай бұрын
I added the puzzle to my art library, but when I go to any of the puzzles, it does not show double lines
@TheLouisianaHobbyGuy 10 ай бұрын
I changed to single lines, but I can't edit the video once it's published.
@sic-madeairbrushing76 3 ай бұрын
Good video bro. One question, how do i get my cuts on my layers to cut at certain rotation. I move the layers and it still does not set up the way I won't. If you or anyone else can help me I would appreciate it. Thank you
@TheLouisianaHobbyGuy 3 ай бұрын
On the Laser Tab, click on optimization settings.
@sic-madeairbrushing76 3 ай бұрын
Thank you brother. I have a Geieke Cloud Pro Co2.Making a puzzle for my grand daughter.
@peterferrie4761 Жыл бұрын
Hi Rich i can not find the file Puzzles in the forum ,I can find one marked puzzles - V - 5 but this does not have the double cut line where can I find them please
@TheLouisianaHobbyGuy 11 ай бұрын
I removed the one with the double lines. Folks had too much trouble using it.
@michaelnewham2580 2 ай бұрын
How can I get hold of your puzzle grids
@TheLouisianaHobbyGuy 2 ай бұрын
They're on my free forums in the members only area. lahobbyguy.com/bb
@thesixofus2782 7 ай бұрын
Where can I find the puzzle downloads? Thanks
@TheLouisianaHobbyGuy 7 ай бұрын
On my free forums. lahobbyguy.com/bb
@Treacle1959 4 ай бұрын
Hi Rich sorry to bother you. I am slowly going through your KZfaq video's and loving them all. I am only a year into laser's and I now have the sculpfun S30 ultra 33W. I just came across the this video reference jigsaw puzzles. I have had a look in the forum art library but I cannot find the puzzle file in their. If you still have it would it be possible to point me in the right direction. Many thanks and once again another great video. 👏
@TheLouisianaHobbyGuy 4 ай бұрын
You have to be a free member on the forum to see the downloads.
@Treacle1959 4 ай бұрын
@@TheLouisianaHobbyGuy Hi and thanks for the quick reply. I am a member on your forum and I have most of your free art library, but I can't see the jigsaw puzzle file. I will log back in and take a closer look thank you 👌
@Treacle1959 4 ай бұрын
@@TheLouisianaHobbyGuy Hi again sorry to be a pain. I have searched the whole library for the puzzle.lbart but I haven't had any luck. from page 1 to page 4. It could be that this video is 2 years old and the file may have been removed. never mind I will try to work it out myself and I appreciate you have taken time out to reply. thanks for the video's. Mick 👏
@kiweekeith 2 жыл бұрын
Absolutely Brilliant vidclip ..... Greetings from New Zealand ..... I just happened upon your vidclip and am Totally intriqued ..... Will drop you an email with More Questions .... :-) :-) :-) .... Best to All from NZ
@TheLouisianaHobbyGuy 2 жыл бұрын
Welcome aboard!
@johndiego3105 2 күн бұрын
When I opened up the file in the Art Library, the lines were single lines to cut instead of the double cut. I’m sure it’s something I’m doing wrong
@TheLouisianaHobbyGuy 2 күн бұрын
I've since changed them to single line John.
@derrickhaig4191 2 жыл бұрын
Hi Rich I have downloaded the puzzles to my Art Library but they don't have double cut lines for the pieces or outline. It was puzzles V2 that downloaded Can you help Derrick
@TheLouisianaHobbyGuy 2 жыл бұрын
I updated it to single lines. Found that it works better that way Derrick.
@elizabethbarnett5781 5 ай бұрын
v5 does NOT have the double lines you mention in the video...
@TheLouisianaHobbyGuy 5 ай бұрын
I don't use them anymore Elizabeth.
@ersheriff 3 ай бұрын
Puedes poner donde está el archivo para descargarlo? Alguien me puede ayudar?
@TheLouisianaHobbyGuy 3 ай бұрын
It's on my free forums. lahobbyguy.com/bb
@ersheriff 3 ай бұрын
DONDE ESTA EL LINK DE DESCARGA?
@TheLouisianaHobbyGuy 3 ай бұрын
It's on my free forums. lahobbyguy.com/bb
@notlem80 2 жыл бұрын
thank you! where is the puzzle library?
@TheLouisianaHobbyGuy 2 жыл бұрын
On my free forum Jim, in the member's only download section. Link in the description.
@MrDmorgan52 Жыл бұрын
What if you're wanting a puzzle using an image with no background? Like a downloaded image of say Santa Clause. How can I get the laser to cut out outline of Santa without having these itty bitty pieces? TIA
@TheLouisianaHobbyGuy Жыл бұрын
Put the puzzle cut layer on top of the image.
@reiback99 Жыл бұрын
Hello, I don't know if you will still reply to the comments, but I would be interested to know if you know the way to leave the puzzle pieces in a single cut and not in two passes.
@TheLouisianaHobbyGuy Жыл бұрын
Yes, just ungroup them and delete one, and then change the passes to 2 in the cut settings editor. I have changed all of my puzzle downloads to 1 line now.
@lpaltageek Ай бұрын
I downloaded puzzle from Cuttle. When previewing cut file I get message "8 shape(s) were set to fill, but weren't closed. These have been removed as they cause problems....Options are Show me or Continue?
@TheLouisianaHobbyGuy Ай бұрын
Change the layer from fill to line.
@lindaputney1342 Жыл бұрын
I cannot get your library to download for the puzzles if you could shoot me a text on how to do that I would appreciate that thank you
@TheLouisianaHobbyGuy Жыл бұрын
Instructions are at the top of the page Linda.
@snoozy747 Жыл бұрын
Hi There @The Louisiana Hobby Guy (Rich) ....first off all....i just bought my first laser (sculpfun S9) and learnder A LOT from you.....CUDOS !!! But when i check your site and download your updated puzzles for ightburn...they are NOT double lined....is that a roblem...no use for that anymore ? greetz from the Netherands
@TheLouisianaHobbyGuy Жыл бұрын
Hi Passie, no, I've since gone back to the single line puzzles. They work for everyone.
@mikehanzlik1819 2 жыл бұрын
I just ran across this video and it is great. I did see the response about glung a color picture to 3mm ply and cutting out the puzzle. I wonder if a person glued the picture on the material and then cut it from the back side if that wouldwork better?
@TheLouisianaHobbyGuy 2 жыл бұрын
I don't think that would work. Maybe on a C02 laser, but not a diode Mike.
@mikehanzlik1819 2 жыл бұрын
@@TheLouisianaHobbyGuy thanks.
@TheFalconJetDriver Жыл бұрын
I have another question I have been taking photo graphs and mounting them on card stock then applying the puzzle template of yours. After running the file the kerfs seem to be too wide. and I have followed your kerf set up video to create the off set for a tighter fit but they are way to lose. what am I doing wrong?
@TheLouisianaHobbyGuy Жыл бұрын
Try not using any kerf offset at all. That seems to work best for me.
@oliviermartin7871 11 ай бұрын
Hello, comment faire pour obtenir votre grille de puzzle sur lightburn ? Merci d'avance
@TheLouisianaHobbyGuy 10 ай бұрын
It's in my free forum, lahobbyguy.com/bb
@oliviermartin7871 10 ай бұрын
Désolé je ne trouve pas ?
@TheLouisianaHobbyGuy 10 ай бұрын
It's on the main page. You can only see the category if you're a member.
@lpaltageek Ай бұрын
I just finished making a puzzle with photo engraved. Running from Controller. Message "No enough extended memory"???
@TheLouisianaHobbyGuy Ай бұрын
Delete some of the older files on the controller.
@lpaltageek Ай бұрын
@@TheLouisianaHobbyGuy I only have around 10 files but will delete all but a couple and see if that helps, thanks for your patience!!!
@user-vt3hg3zu9e Жыл бұрын
I have tried this cutting out the puzzle pieces with the double lines and it is just to sloppy of a fit. if you just make 1 cut in the middle of the pieces they will fit together but I am having problems getting it to trace down the middle of the lines.
@TheLouisianaHobbyGuy Жыл бұрын
I do all single line puzzles now Caleb. I don't know what trace down the middle means. Try posting on my free forums. lahobbyguy.com/bb
@jayllup9171 Жыл бұрын
Hello..i am just a begginer in laser engraving..in my lightburn..my "art library" is empty..how can put a puzzle layout ?
@TheLouisianaHobbyGuy Жыл бұрын
kzfaq.info/get/bejne/q9eKrNyXytvGf58.html
@jayllup9171 Жыл бұрын
@@TheLouisianaHobbyGuy thankyou😊
@katiewright9631 2 жыл бұрын
great video, i've downloaded the puzzle library from your website however cant find any files when i try and load into lightburn?
@TheLouisianaHobbyGuy 2 жыл бұрын
You have to download them to the right folders Katie. I have full instructions on the download page Katie. Some folks have to right click on the files and choose, "Save link as" to be able to specify a folder.
@arielrolfe5719 Жыл бұрын
This was so helpful! But I am having trouble finding the file for the single line version. The double lines are still very loose pieces. Can you share the link to buy the single line puzzle? EDIT - I found it! I didn't realize there was a forum separate from the website.
@TheLouisianaHobbyGuy Жыл бұрын
Awesome! Glad you found it!
@gothmaniow Жыл бұрын
hi Rich i just downloaded and checked out these files then took a look at the attached vid and in the vid it mentions you have to have a two line cut to make these puzzle templates work .. thing is all the designs in your new updated v5 puzzle Templates are all single lined :/ can you explain to me how to make these templates double lined or if there is a vid made for explaining how to ?? thank you , :D
@TheLouisianaHobbyGuy Жыл бұрын
I've stopped using the double line puzzles. They're all single line now.
@gothmaniow Жыл бұрын
Thanks for prompt reply 👍 do they work just as well then ?? 😁
@TheLouisianaHobbyGuy Жыл бұрын
Yes
@jimwoodworker4110 2 жыл бұрын
Another great video as usual. I think this a great idea. Going to try this with pics of my grandson. I downloaded the puzzle file. When I put one in Lightburn though it doesn't show the double kerf lines when I zoom in and there is no perimeter line on the outside of the puzzle. Am I doing something wrong?
@TheLouisianaHobbyGuy 2 жыл бұрын
No Jim, I changed it to single line. Seems to work better.
@jerrywhaley6242 2 жыл бұрын
Thank you for the great videos you definitely make things easier to understand! I just became a member of the forum and downloaded the puzzle pieces which only have a single line. I researched it and made sure it was in line mode but also saw another that said it is only a single line now is that correct?
@TheLouisianaHobbyGuy 2 жыл бұрын
Awesome, thank you Jerry! Yeah, I do them in a single line now.
@jerrywhaley6242 2 жыл бұрын
@@TheLouisianaHobbyGuy Thank you for the quick response will I need to mess with a kerf offset?
@HGANGHONY 2 жыл бұрын
I lost my layers palette. How do I restore them?
@TheLouisianaHobbyGuy 2 жыл бұрын
Window --> Reset to Default Layout
@mikeledee8786 Жыл бұрын
What material do you print on and or use as a backing for the puzzle? Thanks
@TheLouisianaHobbyGuy Жыл бұрын
I don't understand the question. It's just a simple piece of basswood that I engrave and cut.
@mikeledee8786 Жыл бұрын
@@TheLouisianaHobbyGuy what paper do you print the image on?
@crowveg Жыл бұрын
Is it ok to resize the templates or will that mess it up?
@TheLouisianaHobbyGuy Жыл бұрын
Yes you can.
@johnnymullins9237 Жыл бұрын
The only file I see in your members only download section is Puzzles-v-5. When I install that into Lightburn 1.2.01, they seem to all be single lines, not double lines like in the video. Am I looking at it wrong? (I am new to Lightburn) Also: Since there is a slight gap between all the pieces when you cut (so each piece is cut individually), when you place your photo on top of the puzzle pieces, it seems that you will be missing these tiny gaps in the photo when you put the pieces together. as a puzzle. Wouldn't/couldn't it be noticeable?
@TheLouisianaHobbyGuy Жыл бұрын
I've since changed to the single line puzzles. Watch my video about kerf offset. There will always be a gap where the puzzle is cut.
@johnnymullins9237 Жыл бұрын
@@TheLouisianaHobbyGuy Ok. Thanks!
@bentebrunsvelt319 2 жыл бұрын
Thanks you 👍👍🇳🇱
@TheLouisianaHobbyGuy 2 жыл бұрын
Thank you too Ben! I appreciate you watching! 👍
@OldCurmudgeon3DP 2 жыл бұрын
Would this work for Print & Cut?
@TheLouisianaHobbyGuy 2 жыл бұрын
Yes, anything works in Print & Cut.
@ASHORY20 Жыл бұрын
more then 12 hours for it?
@TheLouisianaHobbyGuy Жыл бұрын
It depends on your laser and settings.
@taylors-workshop 2 жыл бұрын
Could you print a image on photo paper and stick it to card then cut it out on the laser?
@TheLouisianaHobbyGuy 2 жыл бұрын
Sure, that's how it's done. People mod podge it. A C02 would be best for this, but a good diode can do it with air assist.
@taylors-workshop 2 жыл бұрын
@@TheLouisianaHobbyGuy I may give it ago as just got my first laser sculpfun S9 and have fitted air assist to it.
@icemanfred 2 жыл бұрын
This looks like a fun project. But where is the puzzle template?
@TheLouisianaHobbyGuy 2 жыл бұрын
The puzzle templates / Lightburn files are available on Forum Zombie, in the Members only Download section.
@icemanfred 2 жыл бұрын
@@TheLouisianaHobbyGuy I must be missing something. i dont see a link in the description.
@TheLouisianaHobbyGuy 2 жыл бұрын
@@icemanfred lahobbyguy.com/bb
@thedeveland 2 жыл бұрын
Where are the puzzle files? They are not in Art Library, at least I cant find them
@TheLouisianaHobbyGuy 2 жыл бұрын
Members only downloads... 4th from the bottom.
@thedeveland 2 жыл бұрын
Still can’t find, what page is it on?
@TheLouisianaHobbyGuy 2 жыл бұрын
@@thedeveland There's only one page in Members only downloads... 4th from the bottom.
@mikeledee8786 Жыл бұрын
Hey Rich, where do I download the puzzle file? Thanks.
@TheLouisianaHobbyGuy Жыл бұрын
In the member's only section of my free forums: lahobbyguy.com/bb/
@mikeledee8786 Жыл бұрын
@@TheLouisianaHobbyGuy As always thanks
@yardennaveh2441 Жыл бұрын
Hi, thanks for this tutorial! I may have missed something but I can't find the puzzle art library in the forum (I am a member). Any chance you can post a link? :) Thanks!
@TheLouisianaHobbyGuy Жыл бұрын
Use the search box at the top of the forum Yarden.
@yardennaveh2441 Жыл бұрын
@@TheLouisianaHobbyGuy thanks. I did use the search but couldn't find it at the beginning. After some more research I now found it, but I saw several people commented on the forum they couldn't find it either. Maybe worth pinning a post with the exact search term to look for. Thanks anyway - that's awesome!
@TheLouisianaHobbyGuy Жыл бұрын
@@yardennaveh2441 I would have to pin a LOT of posts! 🤪
@yardennaveh2441 Жыл бұрын
@@TheLouisianaHobbyGuy fair point 😜
@amonraa71 2 жыл бұрын
PLEASE HELP. I downloaded it.I only see one line. There are two lines in the video.Parallel.Thank you.
@TheLouisianaHobbyGuy 2 жыл бұрын
The line is in fill mode. Change it to line mode.
@amonraa71 2 жыл бұрын
@@TheLouisianaHobbyGuy Thank you. Greetings from Hungary
@icemanfred 2 жыл бұрын
at 2:59 I am doing something wrong . I imported a pic but I dont get the option to apply the mask to the image. how are you selecting both the image and the square template behind it?
@TheLouisianaHobbyGuy 2 жыл бұрын
Drag from the bottom right, up over both slightly to the left. Dragging from the bottom right selects everything in the path.
@icemanfred 2 жыл бұрын
@@TheLouisianaHobbyGuy i did that. i tried skewed images off center, lager image over the template, smaller image within the template. so I am doing something wrong. I tried control A but that selected EVERYTHING including the puzzle pieces. i used a jpeg for the image I wanted for the puzzle. does it have to be a different file type?
@TheLouisianaHobbyGuy 2 жыл бұрын
Try starting over with a blank slate. Maybe a different file format for the image? I can't imagine why it wouldn't work for you.
@icemanfred 2 жыл бұрын
@@TheLouisianaHobbyGuy I had to assign it a cut layer. Then it worked . However the puzzle pieces don't show through like yours. But it. Looks correct in the preview.
@TheLouisianaHobbyGuy 2 жыл бұрын
@@icemanfred Click Window --> Check "Filled / Smooth" and it will look like mine.
@jessetutterrow4320 2 жыл бұрын
I'm just beginning my laser journey, actually I have not yet bought a laser. Could you laminate a high-quality color picture onto a piece of plywood and then use your template to cut it into pieces? What would be the problems with this?
@TheLouisianaHobbyGuy 2 жыл бұрын
Well, a typical 5W diode laser produces about 3255 Kelvin, or 5399° F when focused to a 1mm beam. The speed at which it travels significantly lowers the temperature, but it still does vaporize wood or plastic; that's how it cuts. It would do the same to printed photos and melt or burn all of the edges.
@stretch3736 Жыл бұрын
Hey Rich, another fantastic tutorial. I just downloaded and installed your V-5 Puzzle library and when I drag a pattern into Lightburn, they are not double lined, they are all single lines...am I missing something? I know I am, as it's alwasy 97% user error :)
@TheLouisianaHobbyGuy Жыл бұрын
No Jud, I changed them all to single line and refitted them. KZfaq doesn't allow editing of videos.
@stretch3736 Жыл бұрын
@@TheLouisianaHobbyGuy ok thanks Rich. Next dumb question would be, do they cut fine with the single line? And then for your template to fit whatever image, just duplicate the outside perimeter?
@NoXs4u Жыл бұрын
@@TheLouisianaHobbyGuy Although you can't edit a video, you can put a text overlay to point out changes/mistakes/improvements at certain moments in the video. Maybe that can help in some cases.
@janmueller41 2 жыл бұрын
You mention being able to download some of your projects but where do I go to be able to download an item?
@TheLouisianaHobbyGuy 2 жыл бұрын
Janette, you're a Patreon supporter. *You have free access to my graphics website* engraveandcutfiles.com/. If you didn't get your 100% discount code, please email me and I'll send it to you. support@engraveandcutfiles.com
@zebo-the-fat 2 жыл бұрын
Very nice, why are all the best ideas so obvious after someone else desribes them?
@TheLouisianaHobbyGuy 2 жыл бұрын
😁 I have a bunch more up my sleeve Zebo!
@lonniedupont 2 жыл бұрын
👍🏻👍🏻👍🏻👍🏻👍🏻
@TheLouisianaHobbyGuy 2 жыл бұрын
Thanks again Lonnie!
@glennmcmullin459 2 жыл бұрын
I am doing something wrong, I did everything in the video. Everything looks good until I hit preview and it just shows black.
@TheLouisianaHobbyGuy 2 жыл бұрын
Zoom way in in the preview window and you'll see it Glenn. When you're using images, you don't see the gradients, just a big black blur.
@glennmcmullin459 2 жыл бұрын
@@TheLouisianaHobbyGuy Thank you for the response and the videos.
@addohm Жыл бұрын
Seems like the puzzle lib is not in your current package
@TheLouisianaHobbyGuy Жыл бұрын
Click the store link in the description. The free file is there.
@dale2512 Жыл бұрын
Was that 12 hours 41 minutes to make?
@TheLouisianaHobbyGuy Жыл бұрын
Nope, not even close.
@RoadstarRider1 2 жыл бұрын
Great job making these tutorials, this Puzzle looks like a fun project. Can you provide a link for the Puzzle Files, apparently I'm challenged . Thanks ... Tim
@TheLouisianaHobbyGuy 2 жыл бұрын
Hi Tim, the download is in the Members Only section of my Forums. Once you become a member, the download section will magically appear 😎 lahobbyguy.com/bb
@RoadstarRider1 2 жыл бұрын
@@TheLouisianaHobbyGuy Thanks, signed up and looking forward to learning more about LightBurn.
@TheLouisianaHobbyGuy 2 жыл бұрын
*Great Tim!* _See you there!_ 👍
@adrianchenciu9440 2 жыл бұрын
@@TheLouisianaHobbyGuy hello. I have fallowed you advice and became a membre I have foun the puzzle but it have ".lbart" extension.... What program do i use to open it? I use LightBurn and Corel 6 Thank You
@TheLouisianaHobbyGuy 2 жыл бұрын
@@adrianchenciu9440 You don't open art files Adrian. You open Lightburn, go to the Art Library Tab and click on Load.
@lorikasprack2554 2 жыл бұрын
why do you make it so difficult for newbies, i joined your forum and still cannot find the down load for puzzle, you make it very discouraging for people who are BRAND NEW. maybe you should take into consideration everyone is not computer savy or laser savy, thats why we come to youtube
@TheLouisianaHobbyGuy 2 жыл бұрын
Sorry if you're having trouble Lori, but I try and make it as easy as possible! Here's how easy it is: Login into the forum --> Click on Member's Only Files & Downloads --> Click on Laser Cut Puzzle with template. *Literally TWO clicks!* I don't think anyone can make it any easier...
@TheMakersMarkTSF Жыл бұрын
WOW!!! The audacity of some people! Rich, on behalf of the thousands of inexperienced, computer illiterate, NOOB's that you have helped (especially me) I apologize that someone would respond to you in that manner! I have been putting in the work, studying hard, and feel like I am making excellent progress in Lightburn University with Professor Rich as my instructor. When I have a question I actually go to your extensive library and forum for the answers, and even if my inexperience or ignorance couldn't find the answer I would never blame in you! Thank you for what you have done for us all.
Mr Craftsmith
Рет қаралды 4,5 М.
Олимпийскому чемпиону Елдосу Сметову и его тренеру вручили ключи от квартир и машин в Таразе #Сметов
KAZINFORM
Рет қаралды 825 М.
Vintauri
Рет қаралды 22 М.