Making a Morris Chair from Reclaimed Lumber Part I

Рет қаралды 10,685

4 жыл бұрын

This video shows the process that I used to make pieces for a Morris chair from rough cut reclaimed lumber.
I have some bonus footage of me cutting my finger with a chisel at the end...
Making a Morris Chair from Reclaimed Lumber Part I
• Making a Morris Chair ...
Making Bent lamination arm rest for a Morris chair PART II
• Making Bent lamination...
Making a Morris Chair Part III - CNC Back Slats
• Making a Morris Chair ...
Enjoy!

Пікірлер: 19

@onehandedmaker 6 ай бұрын

Nice work! One Handed Maker - Australia

@williamquimby7491 Жыл бұрын

I want to make a Morris chair and I stumble on this. I hope you remember me from Iceland. I hope you and your brother are well.

@JeremiahL Жыл бұрын

Hey whats up will. I do remember you.

@JeremiahL Жыл бұрын

If you go to my profile, click about, you can get My email address. Im also on instagram, and facebook.

@JeremiahL Жыл бұрын

I have some complete plans I can send you if you are interested. I also have 3D models if that helps you.

@jamiehageman6191 3 жыл бұрын

Where did you get the plans for this chair?

@JeremiahL 3 жыл бұрын

Fine woodworking magazine. I think the plans come from Gregory Paolini... I think it was featured in May 2009 g 07, 201207Aug 07, 2012

@tallyrc 2 жыл бұрын

What circular saw is that?

@JeremiahL 2 жыл бұрын

Its an old bosh worm drive circular saw...

@JeremiahL 2 жыл бұрын

www.boschtools.com/us/en/boschtools-ocs/circular-saws-csw41-48519-p/

@benvoncamp 3 жыл бұрын

give up?

@JeremiahL 3 жыл бұрын

No, I’ve been waiting on it to warm up so I can spray the polly. Video should be done soon.

@DrunkenKnight71 2 жыл бұрын

@@JeremiahL still cold?

@JeremiahL 2 жыл бұрын

@@DrunkenKnight71 ive got all the footage, I just need to put it out….

@JeremiahL 2 жыл бұрын

I deviated from the plans and used a general finishes poly using hvlp. The guy that released the plans used liquid or gas ammonia to bring out the stripes in the wood. I didn’t use quarter saw, or feel like messing around with all of that. I used a very subtle coat of stain, applied poly, then wet sanded with soapy water followed by a a few more light coats of poly spray…

@JeremiahL 2 жыл бұрын

Ill try to finish off the editing. I have had alot going on with work, and had a few growing pains with my shop set up that have made it difficult. Thats all for excuses, Ill try to get the video publish soon.