Making a new furnace

Рет қаралды 145,957

7 жыл бұрын

I needed to make a new furnace, because my old one is toast. I used insulated fire brick that can withstand temperatures up to 1430c and a cement that can withstand temperatures up to 1600c. For the whole furnace I used 25 bricks and a bit more then 10kg of cement. The furnace cost me around 170 euros.
Outside dimensions
Height: 51 cm or 20''
Diameter: 37 cm or14.6''
Inside dimensions
Height: 33 cm or 13''
Diameter: 22 cm or 8.7''
Inlet hole diameter 5 cm or 2''
Outlet hole diameter 10 cm or 3.9''
Music
Music provided by FreeSongsToUse.
Track: Evalk - Lavender Town
Link: • Evalk - Lavender Town
Track: Triple M - 2GETHER
Link: • Triple M - 2GETHER

Пікірлер: 167

@shalormckee2784 7 жыл бұрын

Awesome job as always! I love seeing the progress on the vlogs and then seeing it all put together in one video

@livinwithlp8526 7 жыл бұрын

My next furnace will be like your's. So nice!!!

@turtletails7779 7 жыл бұрын

The ingots looked so clean and nice

@bigstackD 7 жыл бұрын

😉I made a beer keg furnace on my channel a few months back and it not quite as neat and tidy as this one but she gets bloody hot so that's all that matters 👍🏻cool vid cheers🍻

@kylecypher6034 5 жыл бұрын

bigstackD Casting love your channel

@kabirphillip8284 2 жыл бұрын

i guess Im asking randomly but does anyone know of a method to log back into an Instagram account..? I somehow lost the password. I would love any help you can give me.

@drewxzavier9220 2 жыл бұрын

@Kabir Phillip Instablaster :)

@kabirphillip8284 2 жыл бұрын

@Drew Xzavier Thanks so much for your reply. I got to the site through google and I'm trying it out now. Takes quite some time so I will get back to you later with my results.

@kabirphillip8284 2 жыл бұрын

@Drew Xzavier it did the trick and I actually got access to my account again. I am so happy:D Thank you so much, you saved my account :D

@4WorldPeace2 3 жыл бұрын

Very nice planning and thoughtful execution while performing the assembly. Your fuel manifold with that large blower is totally exceptional. Could you make a video on how to assemble a fuel manifold to duplicate yours?

@fredio54 2 ай бұрын

Nice job. Consider lapping the lid and top of main part together or with a concrete stone or something to make them flatter.that way they'll seal better and keep you and your things nearby off to the side cooler.

@dmvgrower9290 5 жыл бұрын

Nice work my brother, love them vids it’s totally relaxing 😎👍

@TheDLVProject 6 жыл бұрын

Love the hardwork you put in.

@gaevlos1281 7 жыл бұрын

The stuff you do is really cool! Love your videos!

@NetNN 7 жыл бұрын

Impressive video you made here. Very educational.

@xBeauGaming 7 жыл бұрын

Nice job cutting the angles for the bottom barrel sides. That would be a beast of a job to get right!

@mhernandezae86 7 жыл бұрын

Excellent! Thanks for the video. I may go and try to build one similar to this.

@erniemathmathlage7924 7 жыл бұрын

Great detailed build.

@AutisticBioweapon 2 жыл бұрын

This video is hypnotic. That furnace looks awesome.

@kassiman5307 7 жыл бұрын

NICE PROJECT.. THANKS FOR THIS VIDEO ..!

@realcdnbacon1392 6 жыл бұрын

Don’t know how much it helps now, but it seems many people couldn’t guess how he made his crucible. Looks like steel pipe with welded plate to cap off bottom and a piece of angle iron as a spout to assist pouring. Along with bolts on the sides for his tongs, which were likely forged himself.

@chufa6553 5 жыл бұрын

I think its a fire extinguisher.

@alexbrock3930 4 жыл бұрын

Excellent work once again 👍

@bigcountryvet5984 5 жыл бұрын

Great job. I really enjoyed your video.

@XblastXX 7 жыл бұрын

really good work, well done!

@maryannhelmond2253 6 жыл бұрын

My husband has subscribed to your videos. He is finding them to be very educational and is impressed with your professional presentation. Keep up the excellent work. (From Canada)

@nikkogutierrez5393 6 жыл бұрын

Great job . Am looking to make one of these.

@paulwoort3420 4 жыл бұрын

Very impressed good job mate 👍👍

@TheD3adlysin 7 жыл бұрын

I really like your ingot table. it's fantastic.

@kof821107 7 жыл бұрын

So good!

@lucianoguerra9013 6 жыл бұрын

Now this is what I'm talking about. Make it so that you don't lose in the end. Propane still cost money it maybe cheaper but the thing is to save at every turn. It may not make you rich but you won't endanger your life. An be prepared for the chance that you will have extra material. No matter how hard you counted there s a chance you will have extra so no dumping it on the grass or a plastic container just because it has water the stuff is still very hot. Thanks you Loader.

@staffie1uk 7 жыл бұрын

Great choice of music!

@teet7918 4 жыл бұрын

Super. Great ideas for my next device :)

@stevenrenaud4883 6 жыл бұрын

lol, sounds like they say "oh le oh Angle Grindd!"

@RobertWilliams-mk8pl 5 жыл бұрын

Nice build.

@markfryer9880 7 жыл бұрын

MP Dragon, I knew you would make a great new crucible, but grinding off the paint and wiping out all the oil by hand? Man you are "hard core" and "bad to the bone", but that's why we like your videos! ;)) Keep up the great work mate. Edit; Not to mention making your own hole saws.

@mattbrooks7278 7 жыл бұрын

Nice one 👊🏻

@kbking3003 6 жыл бұрын

Love ur content keep it up

@user-my8mn7mv6p 5 жыл бұрын

Cool work

@Megabytepanda 7 жыл бұрын

Looks a lot like mine :D

@RJM1011 4 жыл бұрын

Nice work. :)

@STFOURNARIS 4 жыл бұрын

Very entertaining video my friend thumps up

@amarmasz1216 3 жыл бұрын

hi my friend...im from Malaysia...the furnace u made it,it so nice n powerful... thanks bro for give me idea to make it..

@alantreadwell5369 5 жыл бұрын

So cool

@omarm6841 4 жыл бұрын

Great videos , I don’t know why he stop !!

@billywaynemcwilliams9063 4 жыл бұрын

Made your own wholesale bits. Freaking awesome

@bilejdenzl1414 7 жыл бұрын

very good

@suzannedesouhant2269 5 жыл бұрын

Thanks for this well-done video! Trying to do my own furnace and I'm wondering what is the power of your fan? Do you know where can I find one?

@justjo9722 6 жыл бұрын

You're so cool, mate

@stevez2158 7 жыл бұрын

Would it be possible to crush the pieces of fire brick into small pieces and mix it in with your metal casting sand? I think it would make the aluminum stay liquid for a longer time, which would mean less imperfections in the cast.

@handlebullshit 7 жыл бұрын

Nice.

@starpointstudios 6 жыл бұрын

First of all, this is absolutely awesome! You have inspired me to make my own furnace! I have a couple of questions for you. 1) Where did you get your crucible and the tongs? 2) How long did you let the refractory cement dry before testing it out? Thanks!

5 жыл бұрын

Que material usaste? Excelente

@dennisguy6154 4 жыл бұрын

When are you going to do a video on how to make the forgery stand you pour the molten metal in

@fehmisen2603 7 жыл бұрын

Finally. I'm waiting long time :D

@janbojarski004425 7 жыл бұрын

check the other channel then MP dragon posts more often there

@sinterklaas8611 7 жыл бұрын

Nice furnice bro

@andrianrestama4494 7 жыл бұрын

nice brother

@tolashgualris 7 жыл бұрын

Love the video. I am upgrading my own foundry, and have a question as to your material choice. Why do you use fire brick as opposed to Kaowool, ceramic fiber, or a refractory cement? Is there a performance difference?

@mpdragon6295 7 жыл бұрын

I thought that fire bricks are easier to work with and the drying time is much faster

@tolashgualris 7 жыл бұрын

Ok. Thanks.

@obi-wankenobi9871 7 жыл бұрын

Breathing protection for pain removal?

@pablootoya 7 жыл бұрын

Ah, I see you are a man of makita as well

@auto108 5 жыл бұрын

Hi, what an awesome project! Well, what kind of cement you used for sticking the bricks together, in the beginning of the video? It seems more darker then later in the video. Or are both the same cement?

@psacentralcoast6970 4 жыл бұрын

Epic

@rescobar8572 6 жыл бұрын

Excellent! Did you make the burner?

@davidrichardson9216 5 жыл бұрын

If you intend to hot cut an old oil barrel for this kind of project, make sure it is clean and gas free on the inside before you start cutting. Drums with combustible material inside often explode when cut with flames or grinders, with fatal results. Be careful!

@charles1379 6 жыл бұрын

firing up a freshly laid up foundry??? how long did you leave it to dry before starting up the gas fire??

@themclord6443 7 жыл бұрын

Subbed :D

@ganadogamer8964 7 жыл бұрын

4 good vídeo

@rancidoverwelm 6 жыл бұрын

Could you please explain how you made your crucible?

@horseblinderson4747 6 жыл бұрын

rancidoverwelm At a glance it's just mild steel, looks to be five inch .25 wall with a quarter inch plate stick welded on for the bottom. You can use steel to melt all the way up to copper. Some people just use an old cast iron Dutch oven.

@turagaygumus636 3 жыл бұрын

Süper 👍

@NicolasBana 7 жыл бұрын

it was quite dangerous cutting the barrel with oil residue inside. it could have took fire or worse, vapours could have exploded... please next time rinse the inside with a solvent if soapy water doesn't do it then fill the barrel with water to remove any vapours before emptying it for cutting ! otherwise nice video, and a very nice furnace in the end

@kaapporaivio 6 жыл бұрын

And how would an oil evaporate?

@charles1379 6 жыл бұрын

that's what most people ask on the way to the hospital. and if they are still conscious that may even state that they washed out the drum, yet works every time.

@horseblinderson4747 6 жыл бұрын

Propane will actually dig into the porosity of the metal and stay there for quite a while. Safest way is to fill with water when you cut it. Bicarbonate and acid will fill it with co² which will displace fumes.

@bl00dh4nd4 7 жыл бұрын

would like to see an aluminum bat remake

@santiagomc3927 7 жыл бұрын

3 good video

@christianandrade5147 6 жыл бұрын

was that oil dripping from the barrel?? the flammable type??

@omerZauber 7 жыл бұрын

a quick question - i noticed therecwere many sealed air pockets. in the heat of the furnace, couldnt that air get too preasured for the metal barel and cause it to burst?

@mpdragon6295 7 жыл бұрын

I don't think those gaps are airtight so I am not to worried

@daivikmohan4497 6 жыл бұрын

from where did u buy the Morgan stuff

@martinescult 5 жыл бұрын

muy parecido al primer horno que fabrique. construi uno para crisol AX70 con mortero refractario y un bidón de aceite de 200l. este horno funcionaba con gasoil y me duro bastante tiempo, después construi uno con una carcasa metalica de espesor de chapa mas gruesa y tapa basculante que permite mejor funcionamiento y mas comodidad. saludos

@GeorgeBonez 5 жыл бұрын

Is it better to use fire brick as a liner than refractory cement? Fire brick is so expensive. Another thing. I’ve never seen this Blakite stuff. I’ll try to research but if anyone has a good like to purchase this stuff I’d really appreciate it. Thanks for the great vid!

@nikkogutierrez5393 6 жыл бұрын

What and where can I get the high temp fire bricks and cement ? What company

@realcdnbacon1392 6 жыл бұрын

Nikko Gutierrez HWI is also a good company if you live by one of their locations

@viktorjangsell1849 6 жыл бұрын

What is the dimensions of the bricks? I am making my own and i just wamted to know.

@amarmasz1216 4 жыл бұрын

sir...can i know what gases u use for the furnaca??i look like acyteline... thats right?

@Vivabreak1337 6 жыл бұрын

Do you also build the furnace and sell and ship it?

@MudHut67 7 жыл бұрын

What do you use for the crucible?

@DoctorRedstone72 7 жыл бұрын

its welded steal. but on his second channel he says hes getting a graphite crucible soon

@vasilemaf1674 5 жыл бұрын

Hi,can you tell me pls were I can find some bricks like yours?I need to make furnace like u .pls !!!!!

@gorsiegonefarggf772 7 жыл бұрын

You should make a samurai sword, that would be amazing

@AJStout-gi5lo 6 жыл бұрын

Devil Games ant hill

@crafterofmetal 6 жыл бұрын

What gas are you using. I see you have gotten to using an oil instead

@laserfalcon 3 жыл бұрын

How do you determine best size for top hole?

@ryanhouse4269 7 жыл бұрын

Where did u get the ingot molds

@v_astroo 7 жыл бұрын

ابداع

@lindaclayton8701 4 жыл бұрын

👍

@shanek6582 6 жыл бұрын

Is this one fueled by propane?

@Atomicblitz2000 6 жыл бұрын

what are you using as a crucible?

@realcdnbacon1392 6 жыл бұрын

ghostwalker788 from what it looks like it’s a steel pipe with a welded on bottom plate along with a piece or angle iron as a spout

@timmax4817 4 жыл бұрын

So you didnt list the manufacturer of Refractory Cement nor Firebrick Can you list t h os? THANKS!

@nicholasb6781 6 жыл бұрын

what did you use to glue the fire bricks together

@realcdnbacon1392 6 жыл бұрын

nicholas berari it’s a high temperature mortar for stuff like foundry’s or forges

@horseblinderson4747 6 жыл бұрын

Refractory cement.

@dalchemista2814 3 жыл бұрын

Is it possible to burn lead to ash.

@notconnor2512 5 жыл бұрын

How expensive was this?

@kinggeneral2146 3 жыл бұрын

Мастер здравствуйте. Я на ютубе видел ваши видео, который вы показали литьё алюмина разницу на песочную форму и форма из цемента. Мне очень понравился форма сделонного только из цемент. Дело в том, что я тоже сделал форму толька из цемента, как вы показали. У меня не вышло, во время литьё алюмини кипел. И снова опять сделал форму из цемента, и это то же кипел во время литьё алюмини. Вы можете ответить на мой вопрос, почему кипит алюмини? И что надо добавить в цементную смесь, вода или что ещё не будь житкого? Что бы не кипел алюмини во время литьё цементной форме. Моё имя Баккожа, привет из южного казахстана.