At last someone makes something without thousands of pounds worth of power tools.looks like a craftsman at work to me

This is a very good idea of making an all weather knife sheath using very available materuals and minimal tools!!! - and you have a lot of options to adapt it to your kinds of knives and evenbhandy tools!!! - thanks a lot for the good ideas!

Great idea. I’ve been needing a sheath. One for my machete and one for my other knife.

This is such a great idea! Ive always loved sewing knife sheaths and I love learning new ideas! Great DIY

I did so for my historical knife from the USSR. It turned out very well. Thanks for the idea.

A very well compiled instructional video. The tempo was perfect, as I did not have trouble staying awake while watching; some diy's are veritable " snoozers ", great job ... Cheers.

Perfect timing on seeing this. I had been wondering how to make a sheath for my fish boning knife. Thanks a bunch. I didn't remember subscribing to your channel, but now clear why I did.

The Meerkat narration was a nice touch . . .

Perfect!!!! Minimal talking. Sped up redundant actions. No stupid music. End result = Fantastic Sheath... THANKS

Very well done. Looks great and very functional.

Thanks for a well done video, just some common sense instruction.

i did sheath for my jungle knife 5 yrs ago with basically the same technique , pretty much appreciated by friends

Great sheath! I've been looking into making a kydex sheath for a kitchen knife I got recently to protect it in the drawer from the other metal utensils & take camping, but the kydex alone isn't very cheap, and then I learn I have to make a press to form it.. I'll probably give this a try first since I have the tools, thanks! Yours turned out great!

Best one I have seen so far!!

Great job Jon. Call me cheap but I make custom pvc sheaths for my fishing pliers and scissors that I use on offshore fishing trips too.

Watched your Vid a few times and made a nice sheath for a friend, Thanks Really good info, learned something new, all good.

Ok I have to give you my up most respect for this not many people could have pulled this off but that ended up being cool as hell great idea and great job brother

thanks for the idea!

I love the fast forward when scraping the sheath

im gonna try again. and first see if i can watch thus on a bigger screen. i got more pipe so maybe ybe nexy time ill get it. thank you gor all the advise and help even if i did mess it up lol.

Exactly what I was looking for. Thank you for sharing.

That is an awesome job. I'm going to make one now too! Thankyou for sharing.

That's a great idea, came out pretty good👍👍

can you make horizontal carry sheath

Love 💘 de fast foward sound's.

Now I know how I will make a holder for my little Streamlight work flashlight. Thanks for the demonstration!

I do have to say that was good to see being made and thanks

Very nice job, I’ve done a few my self even for some of my machetes , all thou that ur job got a lot of finnes, very perfect stealth, to think if you going to by something like this for a knive you got to pay around 20 bucks, keep going greg from ocala Florida

Nice. I've been trying to find the method, without your success. I like to carry my knives around without their fancy (or badly designed) sheaths. I'll try this out

Nice work... amazing idea my friend

I didn't know you could heat up and shape PVC pipe like that. Thanks for the video. I learn something new everyday.

Good knife pvc very interesting and nice even though we are far apart but we can still greet each other thank you my brother👍👍👍👍🙏🙏🙏🙏🙏🙏

Wow I learned something diffrent very nice sheath this could be made for most tool's that will last for ever.

The only final step I would take is to add some sort of attachment point to the very top. So that I could add some sort of optional lanyard in between the sheaf and the knife. You just can’t be too careful out there in the backwoods. Maybe you could paint the sheaf itself with some super bright orange fluorescent paint.

super cette vidéo! j'ai adoré la simplicité! merci! le couteau c'est de votre fabrication? pas mal non plus!

A great job...congrats !!

good job !

The chipmunks 🐿 know how to make a fine sheath!!

Cool Great Job

Those are some magic hands! Quick too! Too Cool for School!!++++++((

A nice job......I will say I have used a copying saw with a finish blade (smoother cu1t) to cut hard plastic and get to good corners as well. Maybe for you ???

Nice DIY sheath!!

Doing this right away - THANKS ! ! ! 🙂😎👍

Mark,I love your simple idea for a knife sheat. If got the kbar BECKER 16 knife what diameter PVC pipe would you recommend? I'll thank you in advance, regards Gunts

thanks! i just need around a quarter inch or so less yhan my blade width?

Great idea and seems easier than working with Kydex. What's the diameter of the PVC pipe that you started with? Thanks and again great idea.

¡Excelente!

How do you know what size pipe to use? Same as the blade is wide or what?

Nice job!

Excelente video gracias

That knife is beautiful. I can’t believe you made it. What kind of sharpening stone would you recommend? Thanks

Amazing idea

i hot to try it today and got my inside dimentions right but i couldnt seem to get any retintion. some but not enuff. the knife has a single sided gaurd and yhat keept throwinh me off kilter. luckyly i got enough pipe for another try

Would live to make one of these for my Gerber jr machete.

Thank you for sharing this useful video..👍👍

I need a sheath for my hunting knife. Could gray, electrical, pvc be used to make one? I feel like the white would show up too much, for hunting.

About cutting length, Since the tube isn't long enough for two I wouldn't cut so close until the very end just in case might get under sized. But that's small madder and over a nice build. Only is my knife safe in the sheft is it pretty trustable in the woods from breaking? Good video Thanks for the teaching Sir

Excellent!

long chainsaw bar sheaths are not available. this gives me an idea

Thank you,now i get one.

Nice!

amigo al someter tu cuchillo al calentamiento dentro de tubo le estas quitando el tratamiento térmico que debe tener para su resistencia o dureza... saludos

απιθανο, μπραβο, σιγουρα μπορειτε να τις εμπορευτειτε τετοιες κατασκευες

Ficou ótimo 👌👏

What size pvc did he use

Genius!

me gusta mucho tus videos saludo amigo

Does this work with any kind of PVC pipe?

Отличная работа! Благодарю!

Hocam emeğine 🙏sağlık süper 👍oldu 👏👏👏

GOSTEI MUITO DO SEU TRABALHO.

Very clever

outstanding

Cool.

Color it with wood stain to make. It look like wood or leather

Молодец красавчик

I think you should have lined the inside with maybe some leather. Seems to me shoving your sharp knife down into a piece of bare pvc would be kind of hard on the blade.

ดูคำแปลแล้วกุจะรั่ว555 👏👏

What language is that? And how did you achieve superhero speed! 🤣😎. Great project.

Why not cut in half and use it kinda like a kydex sheet?

Like nails on a chalk board!!!

I stpped watching when you sped up the feed

Apek uninya iaka..

Would be easier to press if he used the vise

Great abit quicker please

2 thumbs up and my 2 big toes got to wiggling.

Are you the bill hilly??

Very nifty

If the belt loop breaks out in the woods, you just lost a knife.

Very nice idea.

Красиво! Фен уже купил...., ищу обрезок черной трубы! Спасибо!😂🇺🇦🔥

Sinyal kurang bgus . bnyk erynya

Cangiiiiiiiih

Тяжело видать у вас там даже нождачной бумаги нет

Субтитры на русском - ржач)

А проще нельзя?

I didn't understand one word he said!

😎😎😎😎😎😎💜💚🧡🗡🗡🗡Verry Niice

за е бись 👍

По-русски б можно было б хоть пару не ласковых фраз и сказать?