Making a Rosette for a classical guitar Part 1

Рет қаралды 103,421

Michael Thames

5 жыл бұрын

Luthier Michael Thames in Santa Fe, NM shows his unique approach to making a rosette for classical guitars.

Пікірлер: 72

@willb1157 3 жыл бұрын

I started off thinking "This is like watching glue dry", and now I am only 24 minutes in because I keep going back to watch again. You are a VERY GENEROUS artist.. May your Spirit soar. THANKYOU.

@GabrielGtr86 7 ай бұрын

I've been able to bypass hand sanding the rows of the tiles to thickness with a sanding disc on the drill press (like you do with the finished rosette). I make them from particle board about 2.5-3" diameter. The way I keep them from breaking even with the white end grain, is I glue down one of the rows off center to a workboard and use it as a fence (it obviously sands to whatever thickness you need). The spinning disc pushes them up against the fence and you put them in half way, pull it through then turn them around. Less than an hour compared to many hours doing them by hand. Thanks for teaching me your method of making and setting in rosettes!

@AndSendMe Жыл бұрын

The procedure is one thing, and wonderful to watch and hear the little gems that make it work out, but I have long been impressed by your design sense. Your designs are always very appealing.

@hebicat 4 жыл бұрын

Thanks for these video clips, they are an excellent insight into the craft, the fact that they are pitched at the player and not the luither makes them educational, interesting, very easy to watch and wisely, not to long. So, very well done and thanks again.

@pierrecosta3789 3 жыл бұрын

Brilliant job, once again thank you for the effort.

@RKrein 5 жыл бұрын

Great instruction from the best! Thanks maestro.

@yluvaqui 4 жыл бұрын

Thanks you Michael, it's a great video.

@mattsemm 4 жыл бұрын

Thanks for making this video Michael I have wanted to learn a method for making multiple rosettes in a log but wasn't sure where to start. Now to start glueing veneers!!!

@valtermello 2 жыл бұрын

pure art. Thank you for sharing.

@MrPhilgascoine 4 жыл бұрын

Hi Michael they are fantastic and a lot of work and patience great video 👍

@ambiencelectronica Жыл бұрын

Beautiful.

@WilliamRodriguez-os1rv 9 ай бұрын

Always a pleasure watching your videos

@JMichaelThames 9 ай бұрын

Thank-you!

@jorgegallegos7957 3 жыл бұрын

Su trabajo es excelente, felicidades maestro.

@andrewhenderson6219 2 жыл бұрын

Great work

@murestal 4 жыл бұрын

Genial, maestro; gracias por compartir.

@ivanmaldonadocampos3092 3 жыл бұрын

I need one of those flat Stones..i LOVE It!

@KenFullman 8 ай бұрын

There's a tool used by motor mechanics to compress piston rings (imaginatively called a "piston ring compressor"). I think you might find it an ideal alternative to your hose clamps.

@axemanarnab 5 жыл бұрын

Wow!! this was comprehensive.... a lot more than your old video which inspired me....

@JMichaelThames 5 жыл бұрын

Good! But it quite long and boring ... ha!

@jorgeirenopereiracezar6507 3 жыл бұрын

Muito bom obrigado por ensinar tão bem

@18roselover 3 жыл бұрын

Michael some really good rosette ideas here. !

@deep6thisdeep6this92 3 жыл бұрын

most auto hose clamps, like those in the video, have a tightening mechanism that have a slot for a screwdriver and for convenience are shaped in the form of a hex nut. so use a nutdriver. (an old school manual one. aka screwdriver handle with a male 1/4" socket attachment on the end to fit 1/4" sockets.) it can only slip off if you release pressure. a slot screwdriver can slip off much more easily. :)

@jamestutorialchannel2803 2 жыл бұрын

Thanks for making this video

@marmeecruz6191 4 жыл бұрын

Very interesting, thanks!

@edwinaponte9 5 жыл бұрын

great job

@RogerioDuarte Жыл бұрын

Excelente job

@Ali-kl3ql 5 жыл бұрын

veeeeeeryyyy good , great video thank you.

@JMichaelThames 5 жыл бұрын

Thanks glad you enjoyed it.

@jorgeirenopereiracezar6507 4 жыл бұрын

Santa Catarina Brasil Jorge cezar excelente aula parabens

@petervanrooij2181 5 жыл бұрын

Thanks, that was a great instruction.

@JMichaelThames 5 жыл бұрын

Fantastic!

@gregorycarrillo6303 4 жыл бұрын

buen trabajo #1 maestro

@behradmohammadzad2658 4 жыл бұрын

that was wonderful ... Is it possible to show us how to install the binding of a black guitar ?

@juraciaparecidofrata9093 4 жыл бұрын

parabem pelo lindo trabalho.Gostei.Abraço do brasil.

@simondupreelagak2445 3 жыл бұрын

Wow.... very interesting..... 😊😍

@wilsonkhafaji8908 6 ай бұрын

Thanks,perfect.

@jorgeirenopereiracezar6507 4 жыл бұрын

Excelente aula thiter muito interessante

@Chimo0102 3 жыл бұрын

How do you make those tiny wooden strips?

@edwinbond5995 4 жыл бұрын

How do you make the tiny square lengths that are used to make the tiles in the first place?

@hankpikuni7024 2 жыл бұрын

They have quick clamps for grow lights that would be perfect for this. Only need one

@mizansomani1815 4 жыл бұрын

This is a great instructional! Any recommendations on how we can create the inside wood piece without a CNC machine? I was thinking the core(waste) from a hole saw might work well if it's close enough in tolerance.

@MattMcConaha 3 жыл бұрын

I would probably use a router or dremel on a router compass jig, since I do have that but dont have a drill press. With a drill press it might be preferable to use a hole saw or I think it might be better to use an adjustable circle cutter. Or if you have a lathe then you could probably turn one pretty easy, but a lathe doesn't have much use in a luthery shop. I've also seen jigs for cutting circles on a table saw, that kinda seems like a last resort to me. Actually, there are a lot of ways you could do it, most of them revolve around (haha) the idea of rotating a piece of wood around a peg with some type of cutting or material removal tool a fixed distance away from that peg.

@NoahFielder 4 жыл бұрын

So how long and at what temp would you bake the rosette? You said you wrapped it in tin foil

@frankizamora7822 5 жыл бұрын

WOW your work is amazing. What do you do with the round pieces you push out of the rosettes? If you want to sell them, I’ll buy them.

@JMichaelThames 5 жыл бұрын

Thanks, I usually just throw than away. Why would you want to buy them? Ha!

@michaelburkmier488 2 жыл бұрын

Do you sell any to people who are building their own guitar s

@TheSULTAN7777 3 жыл бұрын

❤

@behrouzbehrouzi270 3 жыл бұрын

بله بسیار خوب است

@Blasthoff 7 ай бұрын

Forget the "speed drill", toss the screwdriver, and get yourself a nut driver!! It's earth-shattering!! 🙃🙃

@13Marley13 Жыл бұрын

Hi. Master. I love your creations. Is it Bee Wax???

@antusalx1294 5 жыл бұрын

can you explain how to make romanillos rosette please?

@JMichaelThames 5 жыл бұрын

No I can not. But I imagine along the same lines as this method. Maybe someone who has worked with Romanilios might read this and chime in.

@michaelburkmier488 2 жыл бұрын

What state are you in

@scafatiguitars6894 5 жыл бұрын

How hot is the oven?

@JMichaelThames 5 жыл бұрын

Just hot enough not to burn the rosette. I wrap it in aluminum foil.

@willb1157 3 жыл бұрын

3:46 Ahh, the old "mouth Vice" Trick, known to many a luthier.

@liandario7450 3 жыл бұрын

You prolly dont care but if you're bored like me atm then you can watch pretty much all of the latest movies and series on InstaFlixxer. Been streaming with my brother for the last few weeks =)

@andersonlochlan5760 3 жыл бұрын

@Lian Dario Yup, have been using InstaFlixxer for years myself :)

@acobrasilacimadetudomaisde4940 4 жыл бұрын

Belo trabalho, só requer muita paciência não?

@psk1461 5 ай бұрын

I hope you have earbuds

@claudiaruiz3304 4 жыл бұрын

Que vueltas que da para hacer eso

@montanamontana80 5 жыл бұрын

waaaaaaaaaaaaaaaaaaaaaaaaaaaaw

@shantelleadeline6053 3 жыл бұрын

Make it wooden with the help of the Woodglut instructions.

@allenhanford 2 жыл бұрын

I shut this off when I saw the CNC router.

@JMichaelThames 2 жыл бұрын

Good! Run along now.

@allenhanford 2 жыл бұрын

@@JMichaelThames Hi, I'm back! Have you ever made anything by hand, you know, without robots?

@JMichaelThames 2 жыл бұрын

@@allenhanford What do you mean "by hand" exactly? Are you a guitar maker by any chance? You shut it off, but I'm obviously taking up real estate between your ears a hike and fresh air will help.

@JMichaelThames 2 жыл бұрын

@@allenhanford Allen quite the youtube channel you got going there, are you operating out of moms basement, or did you mange to move in with your friends?