Making a Simple Metal Bender / Brake
Рет қаралды 27,318
Күн бұрынIn this video I'll make my own metal bender. The one I make can bend about 65cm wide sheet of metal, but the desing is easy to make longer or shorter. The angle iron I use is 5cm x 5cm and 5mm thick. I would recommend using at least this size of angle iron, unless the desing is much smaller because smaller angle iron might bend and make the bends not as accurate. Commercial metal brake of this size goes for around $200 and can't make boxes like this one can, so making one yourself often makes the sense if you have the tools for it.
@labinsky21 10 ай бұрын
Close up spark shots rock!
@Rose10347 10 ай бұрын
This video is like a firework show
@tdcjonm 7 ай бұрын
In the bad, nobodies going to watch it sense.
@twocvbloke 10 ай бұрын
Certainly beats hammering something out in a vice hoping it actually turns out to be the right shape... :P
@lidet19 10 ай бұрын
I love watching you fabricate stuff! It's so cool to see how different minds tackle projects.
@terencew3840 9 ай бұрын
our man made his own springs and wingnuts to lengthen this video
@szucsadam0527 Ай бұрын
You know that piece with the cut outs( where 2 side of the box fitted in) should have 1 cut out in one of the sides with few cm iron left on both sides, then remove the rest and put a sliding metal on top of it with 1 cut out so you can adjust the size of your box or whatever you want to bend. Not sure if it's completely doable like that 😅
@quaileggsvermont Ай бұрын
Are you going to make any more videos??
@carloscampos1516 4 ай бұрын
Sensacional o restaurador
@rizowalla_ 9 ай бұрын
Excelente! 😁
@jamesfield5346 8 ай бұрын
Why didnt you heat the rod to bend it?
@alancalvillo6756 10 ай бұрын
That is one good Metal Bender
@biffabacon8860 10 ай бұрын
maybe put a dot over the welds so your audience doesn't go blind?
@charlesmott8863 6 ай бұрын
You cannot go blind from watching videos of welding, look it up.
@cezartorescu Ай бұрын
There is no uv in the resulting videos, so how can you go blind by watching on the phone or TV?
KULI TECHNIQUE
Рет қаралды 827 М.
Totally Handy
Рет қаралды 7 МЛН