Making A Smart Table / DIY

Рет қаралды 58,425

Күн бұрын

You’re on the Dashing Axe channel and this time we aimed at the classics and decided to make a table based on the movie "The Matrix". A bunch of difficulties and mistakes, 50 meters of addressable LED strip, more than 7000 smart symbols and, as a result, the table that I’ve never seen before. Enjoy watching.
At the moment we have very little left to finish it. But the project is currently frozen because we are stuck with expensive items such as custom suspension, wheels and car registration. Please support our project!
We will appreciate every dollar.
PayPal - alenabarysevich65@gmail.com
ETH и ERC-20(usdt, usdс, busd): 0x30A15Fe2C52a4994FE3550C43d8e0383332AF7f4
TRX и TRC20(usdt, usdc): TS1fX27i6ecp8tGvnEsQs46WY31nr72Z86
Or the THANK YOU function on KZfaq.
THANK YOU !!!!!!!!

Пікірлер: 38

@maxdi654 Ай бұрын

Добра от топора))

@jkrende Ай бұрын

Amazing what you can do with a couple hundred thousand dollars in tools. Amazing build.

@msergio0293 Ай бұрын

😂 exactly

@IAmZen_007 Ай бұрын

I make this with a cheap TV monitor …

@DanteYewToob Ай бұрын

And that makes it less impressive? How would this project be any better if he sat there and cut out each of those thousands of symbols by hand? You just sound jealous and obnoxious… tools serve a purpose and if you can afford them there’s nothing wrong with using them. This isn’t a tutorial and no one said you needed to have those tools, so what’s the problem?

@justhereforthecomments1 Ай бұрын

Find a maker space and make one.

@user-fy4nu3zv1b Ай бұрын

All of this wouldn't be a problem if he hadn't said "DIY". If I made a video where I made something that anyone could do with a few tools they have around the house it would be "DIY", This is just "See How I Made It"

@Suavache Ай бұрын

You guys have created a very beautiful LED matrix effect

@ursvipul Ай бұрын

Use of TV would be more economical, I think!!

@HD-wt8vr Ай бұрын

Amazing! You can never get bored having this unique table! The black was so black! Beautiful!

@siwiskate Ай бұрын

How many LEDs? YES!

@stefanheine6653 Ай бұрын

OK, Saubere Arbeit, ich hätte einfach einen Monitor genommen, evtl mit Touch....

@tonywharton5220 Ай бұрын

What an amazing project ✌️

@bjblan504 Ай бұрын

Wait, that’s all it does?! I thought it was gonna be like a computer 😂

@Serebrin Ай бұрын

Гарно вийшло!

@olegche310 Ай бұрын

классно. залайкайте. пусть увидет

@mohammedal-dhuwaihi9247 Ай бұрын

Amazing, I love it.

@Kuvartech Ай бұрын

Nice frands 👏🏻

@svenbauerle7277 Ай бұрын

This is professionell done, nice !

@Lower_Class Ай бұрын

wouldn't be easier to uses a TV with a screen saver? Cool though

@neilwoodbridge8232 Ай бұрын

Awesome

@Poppy293E Ай бұрын

So glad my DIY $100,000 laser printer from Amazon arrives tomorrow lmao, very cool but not quite DIY.

@BramMertens Ай бұрын

Please use proper protection when working with fine dust and dangerous fumes. If not for yourself then for others you may inspire.

@theenglishman1312 Ай бұрын

Can anyone tell me why a second hand tv with a raspberry pie could not do exactly the same?

@philippegauthier2212 Ай бұрын

amazing how them can afford $10k tools but can't afford a $10 eyes protection and a $10 ear protection... otherwise the end result is nice.

@Sagarmaatha8848 Ай бұрын

All i see is inappropriate heat dissipation for LEDs.

@DamianPenney Ай бұрын

Very nicely done, came out perfectly. What was being sprayed over the sanded epoxy?

@kenny9120 Ай бұрын

лихой топор ))

@Nobe_Oddy Ай бұрын

OMG!!! This is AMAZING!!!! When I saw you first cutting out the letters in the first piece of acrylic I thought to myself that this is what you might be making, but then I thought that it would be way to much work to wire THAT MANY LEDs, but YOU GUYS MADE IT WORK!!! and you did it in SUCH A SMART WAY!!! I didn't think you would be able to get EACH letter their own LED because I was thinking that you would have the LEDs facing the back of the letter acrylic (instead of having it sideways like you did it) and each LED would be too far apart. And the system of interlocking pieces to hold the LED strips was really smart too!! I just can't get over how good it look!! WOW!!!! - What do you use to control the entire board? An Arduino One? an ESP32?!?! multiple controllers? I was hoping so much that you would show us... and then how did you draw the pic of Neo? Were you able to use a program that let you see it on the computer screen first, or did you have to do it ALL in JUST CODE and through trial and error get it to look just right? (and I guess the 'wake up Neo' text would have to be drawn/trial'n'error too, right? or were you able to just use text?) - however you did it, would you consider making it open source so others could make this project too??? this looks like a FANTASTIC novice project for people that are no longer 'beginners' :) - - - GREAT WORK!!!! This blew my socks off!!!!!

@edwardsobolev6176 Ай бұрын

@Nobe_Oddy,этот канал не имеет никакого отношения к человеку в ролике,его канал Лихой ТопорЪ,есть телеграмм,там много интересного,и переходи по ссылке на его ютуб канал,там много интересного,поверь))))www.youtube.com/@LihojTopor

@meer_87 Ай бұрын

DIY... yeah right

@jamesoldershaw7865 Ай бұрын

I've seen this design somewhere else - another youtuber...

@colinhenry7478 Ай бұрын

any chance you have plans for this?

@jacobgabriel Ай бұрын

How do you replace a led if it dies ?

@sensei8120 Ай бұрын

Link to the song from 1:40 to 4:48 please

@germanespinoza1565 Ай бұрын

what does it make it smart?

@DanteYewToob Ай бұрын

If you don’t already understand what makes it smart, I can’t really explain it to you but I’ll try. Basically, each of those thousand LEDs can be controlled individually to display those messages and patterns. There’s a computer that knows where each LED is, and controls the color and power of them all… it’s pretty incredible. That’s how they did the messages at the end.