Making a Steel Knot Metal Handle - Rebar Industrial Style Handle

Making a Steel Knot Metal Handle - Rebar Industrial Style Handle - Rebar Art Welding Project

Рет қаралды 19,756

5 ай бұрын

In this video, I make a Steel Knot Metal Handle which is an Industrial Style Metal Handle, bending rebar to make the Sheepshank knot. I love the look of industrial furniture and all the decor that comes with it, and this rebar handle has the look I like. I hope you enjoy my video of the project, it was a lot of fun to make.
The main tools used, are an LPG Burner, MIG welder, angle grinder, drill, and bench vise.
The Rebar in the handle is 13mm (1/2 inch), The wide flat bar is 75mm wide (3 inches), and 6mm (1/4 inch) thick, The smaller flat bar is 65mm wide (about 2 1/2 inches) and 3mm thick.
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY
Note: When you bend metal/rebar, you naturally weaken it. Bending it cold will normally cause fine cracks, and it may even break if you put enough strain on the rebar or bend it in the same place too many times. Do not rely on cold-bent steel/rebar to support a load.

Пікірлер: 160

@sbr5544 19 күн бұрын

I'm a 69-year-old Japanese man with the same hobby who always looks forward to your videos. I'm thinking of making a treasure chest for my grandchildren to enjoy.

@ji4804 27 күн бұрын

You are the Rebar King!! You should make an epic door knocker to go along with the door handles

@OKCorgiRanch 5 ай бұрын

Good to see you again, Gavin! Thoroughly enjoyed the video and can't wait for the next one.

@GavinClarkdiy 5 ай бұрын

Thank you very much, I am glad you liked it.

@jeremycoleman318 2 ай бұрын

If you were in Star Wars you would be Bend-Kenobi. Love your work sir. Fan from Arkansas, USA

@bradleytuckwell4881 5 ай бұрын

Nice to see you again I hope you had a great Christmas and new year. I always enjoy watching you dance around steel you have a great eye for detail and your work is always on point thanks Gavin

@GavinClarkdiy 5 ай бұрын

Thank you very much Bradley, we had a very good Christmas, I hope your was good as well. Cheers! mate

@foxwhiskey 5 ай бұрын

Great job Gavin. A heavy piece of art ! Looks fantastic. 😊 And, last but not least, of course a happy and healthy new year !🍀

@GavinClarkdiy 5 ай бұрын

Thank you very much, I am glad you liked it and I appreciate your comment. I wish you a happy and healthy new year. Cheers!

@VillageHouseofcommons2 4 ай бұрын

Hello 👋 my friend. Like 👍🏻 super ideas 💥

@GavinClarkdiy 3 ай бұрын

Thank you very much, I am glad you liked it.

@jcamisa50 5 ай бұрын

Beautiful job Gavin. You are the master of your craft.👍👍

@GavinClarkdiy 5 ай бұрын

Thank you very much, I appreciate your comment.

@mikep1085 5 ай бұрын

Another great project Gavin! Nice job.

@GavinClarkdiy 5 ай бұрын

Thank you very much Mike, I am glad you liked it.

@goptools 5 ай бұрын

Happy New Year, Gavin! Beautiful work as always. Hope you are doing well. You do need quite a large door for that handle! -mike

@GavinClarkdiy 5 ай бұрын

Thank you very much, I am glad you liked it Mike, I am going quite good. Yes, it must be a nice door too, it will turn up. Cheers!

@gndlikbokonik8061 5 ай бұрын

Ваши знания, опыт, настойчивость, трудолюбие и фантазия позволяют делать такие чудеса! Спасибо за Ваши уроки.

@GavinClarkdiy 5 ай бұрын

Большое спасибо, я ценю ваш комментарий.

@OscarDelgadoDelgado 4 ай бұрын

Hola Gavin, me encanta tu trabajo cómo siempre, no dejes de hacer vídeos por favor 😊, incluso te busqué por instagram pero mi torpeza fue superior a mí y no te encontré, muchas gracias por tus aportaciones, tu paciencia y sabiduría, me sigues sorprendiendo. Cómo siempre, saludos desde España, aquí tienes un gran seguidor. Hasta pronto.

@GavinClarkdiy 4 ай бұрын

Muchas gracias, me alegro que te guste mi trabajo y agradezco mucho tu comentario. Saludos desde Australia.

@garthbutton699 5 ай бұрын

Gavin I like your style keep up the creative rebar creations,myself and my Son really enjoy your channel thanks for posting🤗😎🤗😎

@GavinClarkdiy 5 ай бұрын

Thank you very much Garth, I appreciate your comment.

@john-richardskarvik2106 4 ай бұрын

Another grate job Gavin. inspirational. hope we see more from you,

@GavinClarkdiy 4 ай бұрын

Thank you very much, I am glad you liked it.

@diegocorrea7722 5 ай бұрын

Beautiful work, in Argentina that knot is nautical and is known as "Margarita" and is used to shorten ropes. Greetings from Buenos Aires, Argentina.

@GavinClarkdiy 5 ай бұрын

Thank you very much for that information, we call it a Sheepshank knot here, Greetings from Australia.

@olddawgdreaming5715 5 ай бұрын

Thanks Gavin , that was a great video. Stay safe, Fred.

@GavinClarkdiy 5 ай бұрын

Thank you very much, I am glad you liked it Fred.

@Kera.S. 5 ай бұрын

Great job and another Fantastic piece you made! 💙 🤗

@GavinClarkdiy 5 ай бұрын

Thank you very much Kera, I am happy you liked it.

@wallpurgesnight8209 4 ай бұрын

Thank you for the apprenticeship sir 😊 I enjoy watching you & seeing the joy it brings you in sharing really warms the heart. Best to you...

@GavinClarkdiy 4 ай бұрын

Thank you very much, I am happy you liked it and I wish you the best for your future projects.

@jasonreszetucha1240 5 ай бұрын

That looks awesome !! You almost make it look easy. Very symmetrical. I always look forward to seeing your new videos.

@GavinClarkdiy 5 ай бұрын

Thank you very much, I am glad you liked it and I appreciate your comment.

@theidlehandsworkshop3884 5 ай бұрын

Love watching your videos, makes me wanna go out and nab a bunch of rebar and go through all the Boy Scout knots lol.

@GavinClarkdiy 4 ай бұрын

Hahaha, Thank you very much, I am glad you liked it.

@garyjones2582 4 ай бұрын

I cant do it with a piece of rope, much less with rebar... Very nice work Mr. R.. thx for bringing us along.. take care my friend and God Bless...

@GavinClarkdiy 4 ай бұрын

Thank you very much Gary, I appreciate your comment. Cheers!

@brettsayers7768 4 ай бұрын

Excellent video again Gavin, always a pleasure to watch your videos, so enjoyable and educational.

@GavinClarkdiy 4 ай бұрын

Thank you very much Brett, I appreciate your comment.

@mikekerr3242 5 ай бұрын

Absolutely fantastic, you are very skilled and your designs are incredible. I am looking forward to your next project.

@GavinClarkdiy 4 ай бұрын

Thank you very much, I am glad you liked it and I appreciate your comment.

@GilbertoMartinez55 5 ай бұрын

Congratulations Gavin Clark, I love your videos

@GavinClarkdiy 5 ай бұрын

Thank you very much Gilberto, I appreciate your comment.

@jayfromtexas6718 4 ай бұрын

Outstanding! Love to watch you create these projects!

@GavinClarkdiy 4 ай бұрын

Thank you very much Jay, I am glad you liked it. I appreciate your comment. Greetings from Australia.

@blackviewderevenskiy5744 5 ай бұрын

Ваши идеи всегда на расхват

@GavinClarkdiy 5 ай бұрын

Большое спасибо, я ценю ваш комментарий.

@kennylakits4093 5 ай бұрын

Amazing work, Love it! Now that I have retired l'll be making some! Cheers.

@GavinClarkdiy 4 ай бұрын

Thank you very much Kenny. I wish you the best for your future projects and your retirement.

@odillaurent1053 Ай бұрын

Unbelievable workmanship, keep up the good work ....

@GavinClarkdiy Ай бұрын

Thank you very much, I am glad you liked it.

@jimfrey4535 4 ай бұрын

Man with the tools you have you truly amaze me. Not some fancy shop just you and your talent. You inspire me to the nines. I try to do some of those things and it’s not easy. Love your talent. Keep it going my friend.

@GavinClarkdiy 4 ай бұрын

Thank you very much Jim, I try to just use simple tools on the channel if I can. I appreciate your comment.

@davidwarland2680 5 ай бұрын

Bloody hell mate, you have done it again, brilliant stuff.

@GavinClarkdiy 5 ай бұрын

Thank you very much David, I am glad you liked it.

@joepiker 5 ай бұрын

Another great project video! thank you!

@GavinClarkdiy 5 ай бұрын

Thank you very much Joe, I am glad you liked it.

@earlcavenaugh6459 5 ай бұрын

Good to see another video Gavin! Nice work as always sir!!

@GavinClarkdiy 4 ай бұрын

Thank you very much Earl, I appreciate your comment.

@jsonkody 4 ай бұрын

I love knots too. This is most fancy handle I've ever seen :O

@GavinClarkdiy 4 ай бұрын

Thank you very much, I am glad you liked it.

@ClintsHobbiesDIY 5 ай бұрын

One of a kind. Attaboy Gavin.

@GavinClarkdiy 5 ай бұрын

Thank you very much Clint, I am glad you liked it.

@viorsa8200 4 ай бұрын

Excelente proyecto muy bien desarrollado y mejor ejecutado maestro, el domador de cabillas corrugadas, hizo un trabajo espectacular, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un merecidisimo like desde Narón (Galicia)🔝👍🤓

@GavinClarkdiy 4 ай бұрын

Muchas gracias, me alegra que te haya gustado y agradezco mucho tu comentario. Saludos desde Australia.

@robroy1967 5 ай бұрын

This is fantastic craftsmanship.

@GavinClarkdiy 5 ай бұрын

Thank you very much, I appreciate your comment.

@scottjune3554 4 ай бұрын

I love watching you work Gavin, your craftsmanship is impeccable.

@GavinClarkdiy 4 ай бұрын

Thank you very much Scott, I appreciate your comment.

@philmenzies2477 4 ай бұрын

Absolutely brilliant. And the perfect place for that would be on the beer fridge door

@GavinClarkdiy 4 ай бұрын

I think you have come up with the perfect place, I agree 100%. Thank you for your suggestion Phil.

@SchysCraftCo. 5 ай бұрын

Awesome

@GavinClarkdiy 5 ай бұрын

Thank you very much, I am glad you liked it.

@terryrogers1025 4 ай бұрын

Looks great, nice piece and the workmanship is first class young man, thanks for the inspiration and video.

@GavinClarkdiy 4 ай бұрын

Thank you very much, I appreciate your comment.

@geraldshane125 4 ай бұрын

Love your art/work. You make it look so easy.

@GavinClarkdiy 4 ай бұрын

Thank you very much, I am glad you liked it.

@eliperli3663 5 ай бұрын

Genial!!! 😁👍

@rosswoolley2854 4 ай бұрын

"Poetry in motion" there Gavin.

@GavinClarkdiy 4 ай бұрын

Thank you very much Ross, I am glad you liked it.

@howder1951 4 ай бұрын

Beautiful end product Gavin. I am amazed at your blacksmith talents in bending these knots up, cheers!

@GavinClarkdiy 4 ай бұрын

Thank you very much, I am glad you liked it, and I appreciate your comment. Cheers!

@adnacraigo6590 4 ай бұрын

And a fine one it is.....

@GavinClarkdiy 4 ай бұрын

Thank you very much.

@aticuss 5 ай бұрын

Love it. +10

@GavinClarkdiy 5 ай бұрын

Thank you very much, I appreciate your comment.

@chikowhitey 2 ай бұрын

love it mate....amazing

@GavinClarkdiy 2 ай бұрын

Thank you very much, I appreciate your comment.

@Mikhail_Baraboshkin 4 ай бұрын

Top!

@GavinClarkdiy 4 ай бұрын

Thank you very much.

@jesusmarte1880 4 ай бұрын

Excelente trabajo

@GavinClarkdiy 4 ай бұрын

Muchas gracias, me alegro que te haya gustado.

@erty7012 5 ай бұрын

Nice job, over the top.

@GavinClarkdiy 5 ай бұрын

Thank you very much, I am glad you liked it.

@Ron-0417 5 ай бұрын

Boy I wish I had the patience to build the stuff you do. Keep the videos coming.

@GavinClarkdiy 4 ай бұрын

Thank you very much Ron, I appreciate your comment.

@alsouthern7190 5 ай бұрын

Very nice Gavin

@GavinClarkdiy 5 ай бұрын

Thank you very much.

@chonpiras2815 5 ай бұрын

chingon señor

@GavinClarkdiy 5 ай бұрын

Muchas gracias, me alegro que te haya gustado.

@ronnyschleinig3347 5 ай бұрын

Cool THX Grüße aus Norwegen Ronny

@GavinClarkdiy 5 ай бұрын

Thank you very much Ronny, I am happy you liked it. Greetings from Australia.

@kulibinAS. 4 ай бұрын

Привет как обычно металл превращаешь в пластилин 😁👍👍👍👍👍🤝

@GavinClarkdiy 4 ай бұрын

Большое спасибо. Мне нравится делать эти вещи.

@user-wj4fx4gn6q 4 ай бұрын

Мне нравиться. Приколные изделия, но на любителя. А вот исполнение отличное! Рука истинного мастера!

@GavinClarkdiy 4 ай бұрын

Спасибо большое, я рада, что вам понравилось, и мне очень приятен ваш комментарий.

@luisluis1525 4 ай бұрын

Estupendo trabajo muy profesional un saludo

@GavinClarkdiy 4 ай бұрын

Muchas gracias, me alegro que te haya gustado. Saludos desde Australia.

@martybaker4102 5 ай бұрын

Hi from Tennessee, and that's an awesome project, enjoyed the video...

@GavinClarkdiy 5 ай бұрын

Thank you very much Marty, I appreciate your comment. Greetings from Australia.

@luisalbertoferreiradasilva9030 4 ай бұрын

Parabéns. Mais um belo trabalho.

@GavinClarkdiy 4 ай бұрын

Muito obrigado, fico feliz que tenha gostado.

@jeanrobert3415 4 ай бұрын

Très bon professeur, musique parfaite, merci

@GavinClarkdiy 3 ай бұрын

Merci beaucoup, je suis heureux que cela vous ait plu.

@mikewatson4644 5 ай бұрын

Very nice. Will be waiting to see it mounted on a door when you get a door that it will fit on Thanks

@GavinClarkdiy 5 ай бұрын

Thank you very much, I am glad you liked it Mike. Cheers!

@harleyperez8393 4 ай бұрын

Very nice job

@GavinClarkdiy 4 ай бұрын

Thank you very much.

@oneshotme 4 ай бұрын

It looks great and you did a wonderful job making it as well!!!! I enjoyed your video so I gave it a Thumbs Up

@GavinClarkdiy 4 ай бұрын

Thank you very much, I am glad you liked it. I appreciate your comment and the like.

@pedroluciano7217 5 ай бұрын

Boa Noite, sensacional parabéns mais uma vez (o SR e um gênio)

@GavinClarkdiy 5 ай бұрын

Muito obrigado, fico feliz que tenha gostado.

@Goalsplus 5 ай бұрын

Great work. I reckon that was a tough one.

@GavinClarkdiy 4 ай бұрын

Thank you very much, it was and interesting one, but it did go ok. Cheers!

@Dmacs_fishingandfun 5 ай бұрын

nice work Gav

@GavinClarkdiy 4 ай бұрын

Thanks mate, Cheers!

@pasqualemete7553 5 ай бұрын

Bravoooo

@GavinClarkdiy 5 ай бұрын

Thank you very much, I am happy you liked it.

@carpetania47 4 ай бұрын

I discovered your channel and I have been impressed with the magnificent work you do.... I have subscribed your channel to continue enjoying.... Greetings from Toledo , Spain

@GavinClarkdiy 4 ай бұрын

Thank you very much, I am happy you liked it. Welcome to the channel, and Greetings from Australia.

@andreasweiss4438 4 ай бұрын

Hello Gavin. The knots look very good. We can do a community project. I'll then open the door for you. Greetings from Germany. Andi

@GavinClarkdiy 4 ай бұрын

Thank you very much Andrea, I am glad you liked it. I am in Australia, so I don't think that will work. Greetings from Australia.

@marcioalmeida5133 3 ай бұрын

❤

@franzayalin9867 5 ай бұрын

❤️❤️❤️👍

@ApukEldar 5 ай бұрын

👍👍

@Moliier101 4 ай бұрын

👍

@j.iturburu 5 ай бұрын

Un hermoso trabajo, una manija grande para una puerta grande. Y te has divertido! Intentaré hacerlo, ya cuento con tu dirección de obra y se donde la colocaré... Muchas gracias, Gavin. Y feliz '24!

@GavinClarkdiy 5 ай бұрын

Muchas gracias, me alegro que te haya gustado. Te deseo lo mejor para tu proyecto y para el 2024.

@jsonkody 4 ай бұрын

You sound like american and you use metric :O Thats first time I see that on KZfaq .. the knot is very nice, good job.

@GavinClarkdiy 4 ай бұрын

Thank you very much. I am Australian, and live in Australia, I grew up using imperial and metric, so I easily use both.

@torowazup1 4 ай бұрын

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎

@johndherzog 5 ай бұрын

You should do sailing knots and sell them ⛵

@GavinClarkdiy 5 ай бұрын

I have done a few knots in steel, I enjoy making them, Cheers! John

@karlgroeger2447 2 ай бұрын

Very nice. How long did it take to make that ?

@user-li4yp7yn2h 4 ай бұрын

С любовью из России. Здесь не все упыри.

@GavinClarkdiy 4 ай бұрын

Большое спасибо. Привет из Австралии. Ура!

@careytamboline5028 4 ай бұрын

Nice work very inspiring!! When I heat rebar for bending it seem to crack or break ?? Any thoughts? Thank you!!

@GavinClarkdiy 4 ай бұрын

Thank you very much, I am glad you liked it. I have had the same problems at times, this one went well, but the rebar does not like to be bent one way and then back in the same direction, if it is always a new direction it seems to be OK. I hope that helps a bit. I wish you the best for your project.

@enrikuar6324 3 ай бұрын

Oh my god, this is great and I want to try it. But tell me, what about rust? After a few months or years, will it rust? Do you apply a clear coat or something? Greetings from very cold Canada!

@GavinClarkdiy 3 ай бұрын

I often use Penetrol Rust Treatment Penetrates Rust 300g Aerosol Spray, and then put two topcoats of Semi-Gloss Clear Coat. That is what I used on the rebar lettering on the back of my workbench, here is the link to that video. kzfaq.info/get/bejne/gKddqs5nl8DLmJ8.html I try not to comment on finishes, As what climate you are in, is it inside-outside, lots of rain, ice, do you want long term and rarely touch, or a wax with a wipe over every year. That is why I have no opinion, Please ask someone in your area what you should use, I feel this is a better way to find out what would be best for you. Thank you for your comment. Greetings from Australia.