Making Big RC Yacht Boat with Foam

Рет қаралды 505,237

Күн бұрын

This time I'm trying something new, making an RC superyacht with depron or foamboard. This yacht model is quite big, about 160 cm or 63 inches length and 11 inches width. Because it made out of foam material, it needs about 3 kg ballast weight to fill the water ballast tanks. At first I was trying to utilize 2 broken servo as its power plant, but abandoned because one of the motor have lower speed than the other. I ended up using inrunner brushless motor with 50A boat ESC. I only use 9 gram plastic servo to drive the rudder. This model really came to life after adding interior details and LED lights. Why I'm using foam board, because I'm a lazy person, I imagine how hard and long hours to cut that plywood, sand it, add putty and sand it again, thanks, maybe next time. If you like this project maybe I will build again another yacht but with 3D printer.
SUBSCRIBE dan Like untuk support channel ini
#rcboat #yacht #diy
You can download the plans on the link below :
A4 Plans : paper-replika.com/RCplans/PR_...
A0 Plans : paper-replika.com/RCplans/PR_...
A3 Print Template : paper-replika.com/RCplans/Yac...
Build instructions :
paper-replika.com/index.php/r...
DONATE via Paypal : Juliusperdana@yahoo.co.id
Join this channel to get access to perks:
/ @juliusperdana
Question and Request please email to
Juliusperdanapr@gmail.com
Playlist :
00:00 Intro
03:03 Hull Construction Part 1
04:47 Power System Part
07:32 Rudder
08:54 Hull Construction Part 2
15:25 Superstructure
18:50 Detailing
22:33 Maiden Voyage
Specs :
1. Length 1600mm / 63 inches
2. Width 280mm / 11 inches
3. Weight without ballast 1675 gram
4. Ballast needed 3000 gram
5. Waterline 85mm from the bottom
Electronics
- Inrunner Brushless motor amzn.to/3nj1tUx
- 50A Boat ESC / 25A amzn.to/3nj1tUx
- Battery Lipo 3S 2200mah
- 9 gram servo (micro servo) amzn.to/2X5GdXH
- 13x 12v LED
Materials :
1. 5mm + 3mm Foamboard/ Depron/ Polyfoam
2. 3mm Plywood / PVC foam board
3. 0.1mm Mica Plastic
4. 20% Black Film
5. hot glue, UHU glue, CA glue
6. Oracal 651 vinyl sticker
7. Hot glue gun amzn.to/38XyrkY

Пікірлер: 615

@brianroberts5740 2 жыл бұрын

I never would have thought that you could get that level of detail with .25" foam board. All the seating and interior details are exquisite. As scale armor builder, I'm really impressed. I'm going to go purchase some material tomorrow. More hot glue sticks and some new blades. Might try the disposable, break away type? The water ballast is super cool.

@hecrowell9771 2 жыл бұрын

Hi Julius I have been watching your foamboard airplane build series with much interest and am amazed at the realism of them all. This is the first boat build that I can recall and because my interest is mainly in boats, it really caught my interest. I am hopeful that you will continue with your depron foam builds - especially boats - even though I understand your desire for modern technology builds with a 3d printer. Keep up the great work, Julius.

@dradden1556 26 күн бұрын

Its amazing how alittle angles can make it crash. Thats why i always tell people that it looks easier than it really is to properly build an rc jet.

@alvgeirsteganehauge6999 10 ай бұрын

What a build!!!! I was a part of building that boat in reality. I remember two big diesel engines and a jet engine in the middle.

@matdeeskbkn 5 ай бұрын

What a great to have a person who involved in constructing the real yatch to comment in this video.

@SynthRockViking 23 күн бұрын

Very practical talent 😌 Cultivating those small straws on your hand

@Mark-pm9nh 3 жыл бұрын

Hi Julias . WOW ! You are an amazing skilled artist . Incredible watching how you built this beautiful yacht . LOVE all the details & LED lights . Very exciting to watch her maiden voyage . God bless . Mark (Toronto) 💙🌈

@JuliusPerdana 3 жыл бұрын

Thank you very much!

@zencraft3676 2 жыл бұрын

That is an amazing work of art Julius.....I have been scratch building warships for 35 years and have never crafted anything as beautiful as that motor yacht. Bravo!! As a side note....I used to ballast my ships with weights on both the port and starboard sides as you did here, but I found over time that I got a HUGE boost in turning performance by keeping ALL of the ballast on the keel line (down the center) and under the waterline whenever practical. Makes both high and slow speed maneuvers look much more realistic.

@JuliusPerdana 2 жыл бұрын

Thank you for the knowledge I will try it on the next Yacht model

@Xx-xd3zo Жыл бұрын

Zen - No videos?

@tonyromano6220 Жыл бұрын

Good tip on ballast.

@brianroberts815 Жыл бұрын

Wow. What a great idea using water as a ballast. Ya just cut a hole in the hull, and it filled the lower half and stabilized it. That is the most amazing foamboard build I've ever seen. Kudos to you and two thumbs up!!! FANTASTIC JOB

@JuliusPerdana Жыл бұрын

thanks

@docmatt31765 3 жыл бұрын

Nicely done! I appreciate all the trial and error too.

@walk4718 3 жыл бұрын

I thought your airplanes were totally amazing. This, sir, has to be the pinnacle of detail. Outstanding. 👍

@JuliusPerdana 3 жыл бұрын

Glad you like them!

@captaintwice 3 жыл бұрын

For many years i have been making ship models with paper and cardboard, but this model beats everything ever created. Mind blowing, Pak! BOOOM! Absolutely Mind Blowing!

@JuliusPerdana 3 жыл бұрын

Glad you like it!

@JuliusPerdana 3 жыл бұрын

request plans by email me : juliusperdanapr@gmail.com my site is temporary under maintenance and unable to update for the moment

@NicksGarage 3 жыл бұрын

Fantastic!

@JuliusPerdana 3 жыл бұрын

Many thanks!

@JuliusPerdana 3 жыл бұрын

The first 1,000 people to use this link will get a 1 month free trial of Skillshare: skl.sh/juliusperdanapaperreplikarcprojects07211 Playlist : 00:00 Intro 03:03 Hull Construction Part 1 04:47 Power System Part 07:32 Rudder 08:54 Hull Construction Part 2 15:25 Superstructure 18:50 Detailing 22:33 Maiden Voyage

@cpmn1 2 жыл бұрын

parabéns você e inspiração para muita gente te desejo tudo de bom

@Sergeichxenon 3 жыл бұрын

Just Brilliant. Foam, film and hot glue, everything you need to make great model of everything Thanks for your awesome projects!

@JuliusPerdana 3 жыл бұрын

Thank you very much!

@petrnovak6364 3 жыл бұрын

I will begin to worship you as my modeling god. Greetings from the Czech Republic.

@JuliusPerdana 3 жыл бұрын

Wow, thank you

@georgecain22 2 жыл бұрын

Your ingenuity is amazing

@steveo726 3 жыл бұрын

This blokes a master model builder

@aerokambuhan 3 жыл бұрын

akhirnya rilis juga mantap om detailnya mantul

@RCHeliJet 3 жыл бұрын

Just Wow. Fantastic Build.

@JuliusPerdana 3 жыл бұрын

Glad you like it!

@kalaiselvam9513 3 жыл бұрын

🐯😴😨

@detians5238 3 жыл бұрын

Oh daya kirain menerima untuk pembuatan juga , makasih dn sukses selalu klw berubah pikiran bisa info saya .

@warrenmoy4251 3 жыл бұрын

Is there anything you can't do omg look amazing

@RizqyChannel Жыл бұрын

Mantap om julius.. Super scale sekali...

@trevorgoodman2323 3 жыл бұрын

Absolutely incredible

@digos8416 3 жыл бұрын

keren om.. lengkapin koleksi super yacht seru kali ya 😃

@robertschmidtrcmodelboats6483 2 жыл бұрын

Nicely done, it runs and looks good in the water. I wish there was a fiberglass hull kit of this model.

@rayivie4880 3 жыл бұрын

This is fantastic. I just wish I had a small amount of the necessary skills and the patience. A beautiful model.

@JuliusPerdana 3 жыл бұрын

Thank you very much!

@petrnovak6364 3 жыл бұрын

Good day. You are a modeling genius for me. Famous, simple, beautiful, incredible ... Thank you, you're a guy, I'm taking off my hat 👍👍👍👏👏👏👏😉

@JuliusPerdana 3 жыл бұрын

Wow, thanks

@vieroboy 2 жыл бұрын

Nice of you to let what’s little left of the Ozone absorb those paint chemicals.....what a guy......

@JuliusPerdana 2 жыл бұрын

lol

@antoniocesar1508 3 жыл бұрын

congratulations!!!! you're an a artist

@pal98111 2 жыл бұрын

Beautiful. I hope you have a big one one day!

@alantaylor353 2 жыл бұрын

Amazing.!! Thank you for showing us.!

@patrickthenot2620 3 жыл бұрын

Sublime comme à ton habitude!… 👍😉

@rogerhereijgers5983 2 жыл бұрын

beautiful yacht with cool details !!

@ephulello8769 3 жыл бұрын

Mewah plus rumit buatnya mantap bg

@muhammadrizalal-faruq1737 3 жыл бұрын

Sukses terus om. Suka banget sama semua karyanya. Plus dikasih bonus plans nya lagi. Mantap

@skyx9905 3 жыл бұрын

I like how he attach the camera to the airboat and the airboat just going around the yacht!

@VTOLKits 3 жыл бұрын

Fantastic build, only missing a helicopter landing pad. :-) Thumb up!

@nivelhard2022 3 жыл бұрын

ficou muito lindo!

@shaunakbarman3653 3 ай бұрын

I love it! I am going to build this too. I did not have 3mm poly foam, so I used 5mm foam board for the hull construction. I think I will have to buy the poly foam now!

@JGold-lz2tn 9 ай бұрын

Super amazing! You are a genius!! Thanks for posting!

@jdiazmotovlog 2 жыл бұрын

keren banget buildnya!

@AG12990 Жыл бұрын

You are a genius brother. Exquisite detailing. 👍✌️

@pertevonur471 3 жыл бұрын

Look amazing Julius,congratulations from Türkiye

@totalyep 2 жыл бұрын

Beautiful!

@jspeedrc 2 жыл бұрын

🤩👍🏼👍🏼From France 🇫🇷

@mikestr100 2 жыл бұрын

Just want to see the next one. Looks great 👍🏻

@verox43 3 жыл бұрын

You are very crafty man, Julius! Love the boat

@JuliusPerdana 3 жыл бұрын

Thank you very much!

@rpmf40 2 жыл бұрын

Amazing, although the yacht this is modelled on has just been refitted with additional length to the hull and also its now blue!

@JuliusPerdana 2 жыл бұрын

thanks, I wish I knew about that before making this, I like blue

@faruk5076 3 жыл бұрын

Please make a helicopter... The ship is awesome👍 🔥

@excellenceinanimation960 3 жыл бұрын

I’m working on a helicopter. Waiting on a soldering iron. I’m planning on uploading some stuff to my channel with its progress.

@tyronewhite3535 2 жыл бұрын

You did a beautiful job.

@MclF01 3 жыл бұрын

amazing build

@hassanhammoud2243 8 ай бұрын

Simply amazing you have such a creative mind it's unbelievable I Marvel in all your videos. When you are prepping it up and painting the first section it almost looks like the Titanic before you started adding all the levels. Keep up the great work your doing. I wish I was local cuz I would definitely be buying some of your product. 😊👍👌

@JuliusPerdana 8 ай бұрын

Thank you so much 😀

@johannesuhl9434 2 жыл бұрын

Amazing work - Thumbs up.

@fatur1997 3 жыл бұрын

Mantap om kapal yacht nya

@Eugensdiet 11 ай бұрын

Really nice work. I'm glad you shot some in the dark. It makes all the interior work worth while.

@johndorenski4127 2 жыл бұрын

Lovely build well done ☺️

@alphabetlotteryltd8860 Жыл бұрын

Absolutely inspired me to go ahead and build!

@s9523pink 2 жыл бұрын

Beautiful, brilliant work!

@JuliusPerdana 2 жыл бұрын

Many thanks!

@ong4422 2 жыл бұрын

Mantab mas 👍

@sicciful 2 жыл бұрын

man that's just sublime, i look with my mouth open. there are no words for wow

@JuliusPerdana 2 жыл бұрын

Wow, thank you!

@KYIMGMG 2 жыл бұрын

I'm really impressed.

@SevenWelt 3 жыл бұрын

Great full 5 stars⭐️⭐️⭐️⭐️⭐️

@hookabunny5030 3 жыл бұрын

Clean Boat and Smooth Beats NICE...!!!!

@JuliusPerdana 3 жыл бұрын

Thanks 💯

@ElisabethSetiawan 2 жыл бұрын

This looks just 😩 ✨perfect✨

@agustaardilessihotang2659 2 жыл бұрын

Its Incredible bro Jul. I'm Proud Indonesia has a brilliant and genius man like you. Can't wait for another crafts. Big Applause for you.

@JuliusPerdana 2 жыл бұрын

thank you bro

@TedJ77 3 жыл бұрын

Awesome work - I'd like to see more power for "cruising" ; also Superyachts usually have a bow thruster for docking.

@JuliusPerdana 3 жыл бұрын

I think this is too fast for me, it's not the scale speed. I have to edit with 1/3 speed for the video to match the real scale speed. This is a big ship, 83 meters long. The real speed it's just 17.5 knots, compare to aircraft carrier which is 30 knots

@philldownes8685 2 жыл бұрын

wonderful model..

@GicelmoPassos 3 жыл бұрын

Congrats, amazing job, you are very talent

@JuliusPerdana 3 жыл бұрын

Thank you very much!

@timvanasen6711 3 жыл бұрын

1st video of yours I watched amazing build light weight and it floats, your attention to detail is true mastery I look forward to more 😉👍🚢

@JuliusPerdana 3 жыл бұрын

Welcome aboard!

@airborne3115 2 жыл бұрын

Very fantastic work.

@kingjaffe321 Жыл бұрын

Very nice beautiful but in Florida a gator might crunch that thing in the water

@dlong966 3 жыл бұрын

As always, another outstanding model.

@JuliusPerdana 3 жыл бұрын

Thanks again!

@dlong966 3 жыл бұрын

@@JuliusPerdana Do you think it's possible to make a submarine? :)

@josephgrech3153 Жыл бұрын

Hello. This yacht is the work of a master tradesman. Is it controlled by a remote-control? Yes, plywood would make it more robust.

@Joelton_moraes 3 жыл бұрын

Ficou Fantástico.

@daffalifio 2 жыл бұрын

Sedang iseng buka KZfaq, nemu channel ini diberanda. Bagus semua Pak karya-karyanya, semangat terus Pak berkarya!

@JuliusPerdana 2 жыл бұрын

terima kasih

@peterschwenke1248 2 жыл бұрын

well you made that look easy.What a beautiful result,well done

@JuliusPerdana 2 жыл бұрын

Many thanks

@danielwahl 3 жыл бұрын

Well done.

@dimitristripakis7364 2 жыл бұрын

Wow, now you have your own superyacht, well done, it is perfect!

@JuliusPerdana 2 жыл бұрын

Yay, thank you!

@CraftingGuy_Rai 2 жыл бұрын

omg! look amazing

@rodolforapp429 3 жыл бұрын

👋👋👋👋👍👍👍👍👌👌👌👌 felicitaciones por el trabajo desde Pacheco Tigre Bs As 🇦🇷🇦🇷🇦🇷🇦🇷 Argentina

@kingjaffe321 Жыл бұрын

Beautiful you are a master craftsman.

@00Mass00 Жыл бұрын

Amazing model! I've seen this ship in real life on the yard at Damen Yachting.

@ahmadbram9026 3 жыл бұрын

Mantaaab....👍

@The_Nameless_Entity 3 жыл бұрын

AMAZING!!!!

@brandonjolley8806 3 жыл бұрын

GREAT JOB!

@garybetancourt4137 2 жыл бұрын

WOW, JUST WOW! Sir, The making of this video has inspired me so much; that I have already downloaded the files and looking for new motors 😂. I'm Also very novice at this so let's see how I do, 🤞😁 Thank you! it's a pleasure to see all your models.

@JuliusPerdana 2 жыл бұрын

Glad it helped!

@jjdarezzo Жыл бұрын

Are there plans available?

@grandcalifornia8410 2 жыл бұрын

The only yacht I could probably afford

@JuliusPerdana 2 жыл бұрын

yea me too

@WoodsPrecisionArms Жыл бұрын

Absolutely beautiful work - I love the light accents looks like the real thing out there

@JuliusPerdana Жыл бұрын

thanks

@WoodsPrecisionArms Жыл бұрын

@@JuliusPerdana ever thought about doing more FPV camera views on that yaght? That would be cool looking out over the deck or through the helm windows or passenger windows. I think FPV can views are where it’s at with this stuff - just adds a level of realism

@JuliusPerdana Жыл бұрын

Actually at first I plan to do that, original plan was not with yacht but with house boat, also bigger scale with full interior. But abandoned after having hard time making the furniture and switch to yacht. I will visit it again in the future. Nice to know we have same thinking