Making Commissions - 2 different Table Bases

No video

Making Commissions - 2 different Table Bases - Forme Industrious

Рет қаралды 34,885

Күн бұрын

In this video I show two builds. The first being a stainless steel table made to the customer specification. I've never made anything out of stainless steel before. It's really nice to Tig weld! I did not make the top as the client is a Cabinet Maker and will be making the timber top out of Black Wattle.
The second build is another table base. This time the legs are made from 10 x 100mm Flat bar that I had rolled at an engineering shop as my small roller cannot handle this thickness. The design was outlined to me by the customer and I finalised the concept which was agreed to. Again the top will be fitted later. It will be made from Stone which will not be ready until February 2023 unfortunately.
These will be the last fabrication jobs I do from this my home workshop. In the New year we will be moving to our new workshop in the Atherton Tablelands, North Queensland Australia. I'm not looking forward to packing up my huge mess for the move!
I hope you enjoyed the video, thanks for watching.
Regards
Scott

Пікірлер: 192

@murphyrp01 Жыл бұрын

More quality work from an Australian craftsman. Great job.

@ScottTurnerformeindustrious Жыл бұрын

Thankyou Randall!!

@MCsCreations Жыл бұрын

Amazing work, Scott! Fantastic table bases!!! 😃 Stay safe there with your family! 🖖😊

@ScottTurnerformeindustrious Жыл бұрын

Thank you as always!!

@peterlevy1682 Жыл бұрын

Good work. That's why I'm watching. See you in the next one.

@ScottTurnerformeindustrious Жыл бұрын

Thanks Peter!

@PaulMcGuinness Жыл бұрын

Love watching your welding. On the few occasions I've tried, it looks like a pigeon has gacked-up some melted nuts-n-bolts.

@ScottTurnerformeindustrious Жыл бұрын

Haha, we all start out the same Paul, but it's like riding a bike. Cheers

@daviddreves5924 11 ай бұрын

I thought you were a manufacturer I have been watching your off grid house and shed build and I thought this guy has some ability not just a try as you go person cheers mate keep up the great work

@ScottTurnerformeindustrious 11 ай бұрын

Thanks David! I'll give anything a crack, I love making stuff.

@Batti2323 Жыл бұрын

Two great projects to close out a fine history in that shed. Now on to the outback!!

@ScottTurnerformeindustrious Жыл бұрын

Thank you! Big clean up ahead.

@joell439 Жыл бұрын

Stunning work as always. 👍👍😎👍👍

@ScottTurnerformeindustrious Жыл бұрын

Thank you Joel!

@tomim7187 Жыл бұрын

Great builds! Sorry about the ding to the bottom line. It happens. You made some rock solid bases that'll out last us all and the look stunning! Good on ya, Scott!

@ScottTurnerformeindustrious Жыл бұрын

Thank you Tom. It's all good, part of the learning process I suppose. All the best!

@manuelmartinho8065 Жыл бұрын

Bonjour Monsieur Turner Je vous souhaite une belle et joyeuse année pleine de santé pour vous et vos proches avec des projets toujours aussi magnifiques, continuez à nous faire de belles vidéos et émerveiller nos yeux. A bientôt, ici encore en 2022 Cordialement.

@ScottTurnerformeindustrious Жыл бұрын

Merci beaucoup pour vos merveilleux mots gentils! J'espère que nous avons tous une année 2023 prospère et en bonne santé, et bien d'autres vidéos !

@malcolmcheyne3803 Жыл бұрын

Great work Scott. Instead of a "QUOTE" you can always give an "ESTIMATE" and adjust your end pricing accordingly. Merry Christmas Mate.

@ScottTurnerformeindustrious Жыл бұрын

Thanks Malcolm! That's a good idea. Merry Christmas to you and your family also!!

@Goalsplus Жыл бұрын

Great to see your art again.

@bafman Жыл бұрын

Nice work, Scott.

@ScottTurnerformeindustrious Жыл бұрын

Cheers Brett!

@stevemurnane1892 Жыл бұрын

When drilling Staino, VERY sharp tools, lowest speed possible, and high preasure. You are effectively scraping away the metal. Welds are not too shabby, for a cane toad. :-)

@jdmccorful Жыл бұрын

Good looking work! Enjoyed watching.

@ScottTurnerformeindustrious Жыл бұрын

Thank you John!

@dougsaunders8109 Жыл бұрын

Nice work as always Scott

@ScottTurnerformeindustrious Жыл бұрын

Thanks Doug!!

@DavidR8 Жыл бұрын

Very nicely done Scott.

@ScottTurnerformeindustrious Жыл бұрын

Thank you David!

@dixiemae5042 Жыл бұрын

You always create the neatest stuffs

@ScottTurnerformeindustrious Жыл бұрын

Thanks Dixie Mae!

@tree_carcass_mangler Жыл бұрын

Love your design sense. I came for your furniture & equipment builds, and I'm staying for your Outback adventures.

@hizzeist Жыл бұрын

Scott's design is what separates him from the masses I reckon... He has an incredible way creating beautiful things out of really standard ingredients

@ScottTurnerformeindustrious Жыл бұрын

Glad you keep checking in TCM. Thank you!!

@ScottTurnerformeindustrious Жыл бұрын

Much appreciated Benjamin, thank you!

@davidsnyder2000 Жыл бұрын

Here Here!!!! I couldn’t agree more. Scott always gets things done above and beyond others👍

@dominiquebellebault4760 Жыл бұрын

Bonjour scott toujours deux très belles réalisation je suis fan🤩 de la deuxième table basse j'aime beaucoup les soudures quand elle sont bien fait sans être meule sa donne un style ❤ avec un dessus en chêne elle serait super top bonne continuation vivement la prochaine video 🤗

@ScottTurnerformeindustrious Жыл бұрын

Merci encore! J'apprécie vraiment vos commentaires!

@dominiquebellebault4760 Жыл бұрын

Merci 😊

@mb19999 Жыл бұрын

Hi from the other side of the earth (Morocco), remarkable artistic designs as always, you're the best, I really love your magnificent designs. 👍👉

@ScottTurnerformeindustrious Жыл бұрын

Very kind! Thank you Mustapha!

@grahamomeara3279 Жыл бұрын

fantastic abilities Scott- great job.

@ScottTurnerformeindustrious Жыл бұрын

Thank you Graham!

@gregg6282 Жыл бұрын

Great work Scott. My welder sounds the same as yours when you are on the spray setting. Although my welds look like bird poop.

@ScottTurnerformeindustrious Жыл бұрын

I bet they don't :) Cheers Gregg.

@428Mario Жыл бұрын

Enjoyed nice work

@ScottTurnerformeindustrious Жыл бұрын

Thanks Mario!

@nurtaskuanyshev8829 Жыл бұрын

Perfect!

@sanjaysami4315 Жыл бұрын

Nice work as always, Scott. Your stainless tig is very good considering it’s not a material you generally work with.

@ScottTurnerformeindustrious Жыл бұрын

Thank you Sanjay!

@Crewman2770 Жыл бұрын

Nice to see you back on the FAB Tools again, hope you get it all moved over to the new place so we can see more.....🇬🇧👍🇬🇧

@ScottTurnerformeindustrious Жыл бұрын

Thanks Tony! It's all coming with me, bit by bit. Lots to do in the NY

@robthewaywardwoodworker9956 Жыл бұрын

Very cool stuff, Scott. Underbidding a project can really take the fun out of it, eh! You spend a lot of your time realizing that you're labour is almost free! Ugh. LOL Anyway, lessons learned. I think we've all been there, and some of us, more than once! Hope your summer is going along nicely. Turns out my daughter is moving over there permanently now. Kids. Maybe I'll manage to take a trip down under one day. Cheers.

@ScottTurnerformeindustrious Жыл бұрын

I'm the worlds worst salesman to boot. I can undercut myself like no other. Summer has arrived and I'm looking forward to winter :) If you're near my way drop in and say G'day.

@branchandfoundry560 Жыл бұрын

Beautiful work and several techniques taught along the way. Thank you for all you do, Scott, to teach all of us! Funny (or not) the table base I recently built as a subcontractor also turned out to yield more "Education Value" than income. Glad to see I'm in good company. All the best, Drew

@ScottTurnerformeindustrious Жыл бұрын

Cheers Drew! One of the workshops that quoted for the same stainless steel table came in double my quote and I guess that's what you have to do for one off jobs. Price it higher than what you think it should be. Thanks for the support Brother!

@branchandfoundry560 Жыл бұрын

@@ScottTurnerformeindustrious That was my big lesson. They're likely higher because they know what it will actually take to make it, and I'm lower because I'm missing something.

@wayneshirey6999 Жыл бұрын

Nice work.

@ScottTurnerformeindustrious Жыл бұрын

Thanks Wayne!

@sylinux7910 Жыл бұрын

Really good job 👍😍

@ScottTurnerformeindustrious Жыл бұрын

Thanks as always :)

@2-trueman918 Жыл бұрын

Very cool👍

@ScottTurnerformeindustrious Жыл бұрын

Thank you!

@davidbender5998 Жыл бұрын

Nice!

@woodandmetalandstuffpauldo8561 Жыл бұрын

Nice work Scott.

@ScottTurnerformeindustrious Жыл бұрын

Thanks Paul!

@daveupdike9469 Жыл бұрын

very Nice.

@mattpeterson7074 Жыл бұрын

I remember doing Spray Transfer welding in my MIG classes. I loved it. It laid down super smooth and it was so easy. Granted it was HOT! You had to have those machines cranked up to get into that range. Love both tables, and for your first time working with stainless, those welds were pretty good!

@ScottTurnerformeindustrious Жыл бұрын

Huge thanks Matt! Yes it's different. I was concentrating on the puddle and the sound was way off, but it looked fine so I kept going.

@davidsnyder2000 Жыл бұрын

From the States Scott, I don’t know what to say, your a true craftsman. Your workmanship and how you solve problems is amazing. Your also a great instructor. Thanks so much for having the balls (sorry to be vulgar) to show off your designs and work. Everything I’ve seen that you’ve designed and built I would have in my own home and shop. Nice work my friend. Much love and respect ❤️🙏👍

@ScottTurnerformeindustrious Жыл бұрын

Thank you so much David for your generous comment! All the best to you!

@latelierdejen-paul2561 Жыл бұрын

super table, j'aime bien le design , avec une préférence pour le deuxième modèle, merci pour le partage 😉(great table, I like the design, with a preference for the second model, thanks for sharing)

@ScottTurnerformeindustrious Жыл бұрын

Thank you for your feedback!!

@dereksstuff8395 Жыл бұрын

Very nice Scott, very nice.

@ScottTurnerformeindustrious Жыл бұрын

Thanks again Derek!!

@rogerwilko8936 Жыл бұрын

Very nice Scott!! Hope you are keeping Bernie and Heath on their toes mate! 😂 Andrew & Bertie.

@ScottTurnerformeindustrious Жыл бұрын

G'day Roger. I'm a bit worried. Bernie says on Friday's 3pm he will ring a bell. We are meant to meet at Bernie's Bar, or suffer fines 😉

@bigpuppytools4295 Жыл бұрын

Merry Christmas to you and your Family, great work of the table frames 👍

@ScottTurnerformeindustrious Жыл бұрын

Merry Christmas BPT! Thank you!!

@marciowashingtonmartins3954 Жыл бұрын

Very good

@ScottTurnerformeindustrious Жыл бұрын

Thanks Marcio!

@Helloverlord Жыл бұрын

I want to be like you when I grow up. I'm 50 now. :D

@ScottTurnerformeindustrious Жыл бұрын

Haha, going up is over rated :)

@muddyfences5559 Жыл бұрын

Watching you fabricate is always a learning experience. Both of those turned out great.

@ScottTurnerformeindustrious Жыл бұрын

Thanks Muddy!!

@bennybnb Жыл бұрын

great video Scott. Lots of angles here!

@ScottTurnerformeindustrious Жыл бұрын

Thanks Ben! Merry Christmas

@janeblogs324 Жыл бұрын

14:47 put a block of wood over the ways. You need it more than you'd think. A must for changing between 3 and 4 jaws too

@ScottTurnerformeindustrious Жыл бұрын

Thanks Jane. Agreed.

@chrisjames6349 Жыл бұрын

Great job on the table bases, they turned out beautifully! I really love the second one.

@ScottTurnerformeindustrious Жыл бұрын

Thank you Chris!

@robertfaizullin4712 Жыл бұрын

سلام✌nice work and excellent results 👍

@ScottTurnerformeindustrious Жыл бұрын

Thanks 👍

@nikond90ful1 Жыл бұрын

Thanks for the video Scott. I know it is a lot harder than people think to build on your own. Well done on the jig/Fixture. Keep safe and stay well.

@ScottTurnerformeindustrious Жыл бұрын

Much appreciated Colin, thanks!

@glennmoreland6457 Жыл бұрын

Good

@theds2003 Жыл бұрын

Love your work as always You make it look easy, i wish it was

@ScottTurnerformeindustrious Жыл бұрын

Thanks again! Yes in the video it all looks easy but it all takes time and effort. It is always good when the project is finished.

@leaouapy8180 Жыл бұрын

Bonjour Monsieur Turner, comme d'habitude un superbe travail et une belle réalisation, de plus, vous semblez avoir trouvé un lieu idéal en pleine nature, un régal pour les yeux, un coin de paradis qui font du bien à regarder par ces tristes temps, bonne continuation et à bientôt.

@ScottTurnerformeindustrious Жыл бұрын

Merci beaucoup! Oui j'ai trouvé un très beau coin de paradis. Nous y emménagerons au début de l'année prochaine. J'ai hâte d'y être.

@BrianNavalinsky Жыл бұрын

Finally able to pre-think where you are headed. My neurons are becoming Forme Industrious.

@ScottTurnerformeindustrious Жыл бұрын

Haha....hang on....that might not be good ;)

@BrianNavalinsky Жыл бұрын

@@ScottTurnerformeindustrious I'm all in. I really like your aesthetic. Growing up in and around Lorain, Ohio, a Rustbelt steel town, your stuff resonates with me.

@surinfarmwest6645 Жыл бұрын

Saturday evening therapy rounded off with a lathe shot! Beautiful work.

@ScottTurnerformeindustrious Жыл бұрын

:) Thanks!!

@louisfaasen4511 Жыл бұрын

When working in my shop, I regularly think of your work Mr Turner... and then I dismantle everything I've done and start again. It's not about perfection, but it's got to be square/true, and neatly finished!

@ScottTurnerformeindustrious Жыл бұрын

I humbled! Thank you Louis!

@FixitFingers Жыл бұрын

Rookie error Scotty, you should know to always price the material out ;) hahaha Hopefully you get some photos of the finished builds on the socials, those legs are epic bits of design :D

@jeffgoldenberg9579 Жыл бұрын

Love the second base. Definitely has your aesthetic about it. Best of luck with the move and blessed holidays ahead.

@ScottTurnerformeindustrious Жыл бұрын

Thanks Jeff!! Same for you!

@MyMiniHomeWorkshop Жыл бұрын

Tough gig that stainless, you should try welding it with a stick, it has a surprise for you, after you finish a run, you're standing back admiring it, when suddenly the slag decides it no longer wants to be where it is and launches itself at you at light speed, scared the crap out of me the first time it happened.

@ScottTurnerformeindustrious Жыл бұрын

Haha :) I'd be keen to try it, but damn, the stuff is expensive right now!

@MyMiniHomeWorkshop Жыл бұрын

@@ScottTurnerformeindustrious Rods are pretty expensive as well, luckily I have a supplier that will sell me loose sticks in the qty I want, so I don't have to buy a whole pack

@thebmac Жыл бұрын

Nice touch with the end caps on that center pipe. Such a simple thing, but really makes it look more professional! Top notch!

@ScottTurnerformeindustrious Жыл бұрын

Thank you Bradly!

@Alanbataar Жыл бұрын

I've done quite a bit of stainless. It seems to me that the most important tool for working with stainless is a drill sharpener.

@ScottTurnerformeindustrious Жыл бұрын

Haha yes, it's tough on the tools.

@jimpritz4169 Жыл бұрын

Very professional Scott your customer should be very pleased with those.

@ScottTurnerformeindustrious Жыл бұрын

Thanks Jim!!

@ShayneRiceNZ Жыл бұрын

Clad to see you back in the shed, you've inspired myself into making a bedroom suite based on what I've seen you do throughout your videos. When I'm, finished Id love to show you. Mixture of wood and metal Cheers from NZ

@ScottTurnerformeindustrious Жыл бұрын

Thank you Shayne! Yes please send through if you get the chance, thanks!

@hizzeist Жыл бұрын

Really cool.. just bought my first welder and you're a great inspiration for what can be done

@ScottTurnerformeindustrious Жыл бұрын

Great to hear and thank you!

@Bear_Builds Жыл бұрын

Loved the video's Scott! I've been wondering what you've been up to. I hope all is going great, and you have a wonderful Christmas!

@ScottTurnerformeindustrious Жыл бұрын

Thanks Barry! Merry Christmas!!

@DowneastThunderCreations Жыл бұрын

👍👍👍

@Andrea-bw8xm Жыл бұрын

I have a special friend who is a welder/fabricator..(.mostly does work on fishing boats) so...watching your incredible skill and talent gives me knowledge about the craft and of course I share your videos with him. I enjoy watching you create! Thanks for this and good luck in the new space. (Moving sucks!...)

@ScottTurnerformeindustrious Жыл бұрын

Thanks Andrea! Yes moving is over rated!

@igortornic8277 Жыл бұрын

Awesome and beautiful work Scott!!!! 💪🏻👏🏻👏🏻👏🏻

@ScottTurnerformeindustrious Жыл бұрын

Much appreciated Igor!

@whodat90 Жыл бұрын

Beautiful work as always.if I may make a suggestion, drill a couple of drain holes in all the sealed areas. Unless they’re hermetically sealed they’re going to fill up with water. I’ve had a couple of pieces of outdoor furniture ruined either by holding the water and rusting or freezing and bursting the seams.

@ScottTurnerformeindustrious Жыл бұрын

Good advice, Thank you!

@charickter Жыл бұрын

Awesome results from standard materials! Can't wait for what projects are to come in the new shop!

@ScottTurnerformeindustrious Жыл бұрын

Thank you!

@jesseservice7828 Жыл бұрын

Muito bom !

@mircomasini9591 Жыл бұрын

Ciao Scott complimenti quanta maestria nel lavorare il metallo bravo e un piacere vedere i tuoi video 👍🏼👍🏼👍🏼

@BradleyMakesThings Жыл бұрын

Great job, Scott! Those came out great.

@ScottTurnerformeindustrious Жыл бұрын

Thank you!

@Nath8737 Жыл бұрын

Should have made the stainless base in gal and hoped they don’t know the difference. Those little fixture clamps are genius have to make some for my table.

@ScottTurnerformeindustrious Жыл бұрын

Haha, They'd feed me to the crocodiles. Yep, those simple fixtures are cheap and work.

@Ding_Bat Жыл бұрын

Great to see you back in the shed! I sure will miss it when the time comes to finally move out!

@ScottTurnerformeindustrious Жыл бұрын

Thanks Ding Bat! I will miss this shed for sure, but having more space will be nice :)

@Dutch779 Жыл бұрын

Reminds me of the medieval tables of of old, made out of Oak, a kings table made out of steel, excellent work Scott. Looking forward to the big shift and the new set-up.

@ScottTurnerformeindustrious Жыл бұрын

Thanks Paul! Big year next year!

@garyjones2582 Жыл бұрын

Very nice work Scott.. If I were there, I'd help you pack up your shop.. I know that's a lot of work.. Hope to see you doing these projects in your new shop soon.. Scott take care and God Bless...

@ScottTurnerformeindustrious Жыл бұрын

Thanks Gary! Yes it's some work for sure. Take care and God Bless.

@48306jw Жыл бұрын

Nice work! It's always a good idea to use anti-seize compound any time you put stainless bolts into stainless threads, FYI.

@ScottTurnerformeindustrious Жыл бұрын

Great advice John. I had a feeling some one would pick me up on that :) Thank you!

@8arzum Жыл бұрын

Awesome pieces dude. Great design ideas as usual.. Sad day when the old shop finally shuts the door. Excited to see the new one fully operational🙂🤘

@ScottTurnerformeindustrious Жыл бұрын

I'm very sentimental so it will be tough to clear out, but the new space is better :)

@oficinadofurtado Жыл бұрын

Mesas lindas 👏👏👏🇧🇷🇧🇷🇧🇷

@thumper124cc Жыл бұрын

You need more volts to get spray transfer, you were running dip transfer by the sound of it. Still adequate for what you're doing though. Get yourself a backing pad for your angle grinder for the finishing work, they work better than a flap disk and get your welds ground down a lot flatter with a better finish.

@ScottTurnerformeindustrious Жыл бұрын

Thank you EAS. Yes it was till poping. I had the volts pretty much maxed out on this small machine but it does the job. Thanks for the tip on the angle grinder.

@tomthompson7400 Жыл бұрын

tidy job.

@ScottTurnerformeindustrious Жыл бұрын

Thanks Tom!

@markneedham8726 Жыл бұрын

Ordinary steel prices are crazy. 75 x 75 x 3mm RHS Galvanised around A$280.00 for an 8 meter stick.

@ScottTurnerformeindustrious Жыл бұрын

I know it's nuts! Anything Gal, zincalume, nickel has gone crazy. Robbery

@josephharrington3530 Жыл бұрын

Another amazing job Scott! Love your designs. You definitely figured out how to lay a nice weld down too! (Reminds me of that bit where your daughter asked if your trip to NY taught you how to lay down a weld lol) Hope ya'll have a great Christmas!

@ScottTurnerformeindustrious Жыл бұрын

Thanks Joseph! Yes that cheeky little rotter has gone and grown up now. Merry Christmas to you also!

@micmike Жыл бұрын

Nice work as always Scott. Would love to get a peak of those tables with the tops on. If possible

@ScottTurnerformeindustrious Жыл бұрын

Thanks Mike. I hope I can too!

@TakamiWoodshop Жыл бұрын

Love the black one, and I'm not sure why/how I think of these enhancements - maybe just the Australian-ness of the whole Scott Turner Experience - but I always think of them - anyway - have you ever thought of putting some frozen shrimp and a business card into the tubes before you weld them closed?

@ScottTurnerformeindustrious Жыл бұрын

I stacked the tube full of prawns ;) haha. Merry Christmas Rob!

@epilotdk Жыл бұрын

Nice job as always. Stainless is indeed expensive - last time I ordered 316 sheet I was 4 times the price of mild steel (which is also twice what it was pre-Covid): All the best for the workshop move, hope it all goes smoothly.

@ScottTurnerformeindustrious Жыл бұрын

Thanks Michael! I had bill sock when I put my order in.

@kevinmorin7965 Жыл бұрын

Scott, SS TIG joints looked too hot, usually left over from mild steel work where arc amperage is higher overall. SS should end up colored blue to golden yellow maybe some oranges but not dark gray. This is where a pulsed amperage power supply can be very handy- autogenous welding of SS is very effective in small fillets and butts of the thickness shown, nice design of the SS base. Fairly in expensive to use passivization gel or even electrolytic passivization to make a very uniform final finish on SS. Neat design on arc frame too! If I've designed in butt welds that will be finished by removing the weld crown; I am in the habit of deeper weld allowance bevels. Hope your customers will do your the courtesy of sending pics with the tops on?

@ScottTurnerformeindustrious Жыл бұрын

Thanks for the good advice Kevin! Yes I was using settings for mild steel which seemed on the hot side. Yes I should get some pictures. All the best!

@darringrey4329 Жыл бұрын

Also the area needs a quick once over with acetone and scotch Brite pad ,

@darrenharris7045 Жыл бұрын

Wicked stuff dude. I'm new to the channel and slightly addicted, thanks for the inspiration. Quick question, what disc/grades do you use to clean over your steel before you finish it?

@ScottTurnerformeindustrious Жыл бұрын

Thank you Darren! For the Mill scale I use "Strip Discs". I find those better than flap discs.

@darrenharris7045 Жыл бұрын

@@ScottTurnerformeindustrious Thanks so much for the advice. Keep the cool videos coming

@davidsnyder2000 Жыл бұрын

I’m sure your busy….but do you have any new videos soon? Just looking forward to your work 😊

@ScottTurnerformeindustrious Жыл бұрын

kzfaq.info/get/bejne/eLNkd9CjxMvXmps.html Just posted. Thank you David for your patience!

@jpkalishek4586 Жыл бұрын

My boss at work has had Prices on Stainless and Copper driven into his head lately. We are doing an "OMG, We Gotta do this NOW" from on high come down, but no money (of course). What budget available a large part is being eaten by Copper pipe (2" x near 1000 feet and 1.5" for a few hundred feet) and some Stainless but some of that will be salvaged from a poorly designed attempt at another form of stupidity for a similar project. Stainless is so high, the added labor of cutting out the current new and unused stuff for some shorter runs is offsetting. As is typical of our situation, if they'd have done it right at the first go, we'd be spending about 25% less

@ScottTurnerformeindustrious Жыл бұрын

Hard to believe material costs right now. I hope hey come back down. Yes you can do your arse on materials pretty easy atm. Good luck with it!

@totti9964 Жыл бұрын

Nice

@worldadventureman Жыл бұрын

New to your channel and just having a look around. Hope you haven't had to answer this before but why did you switch to tig to weld the two circular end caps? Nice work.

@ScottTurnerformeindustrious Жыл бұрын

Thank you! I used TIG as it's much more delicate and controllable. If I used MIG the bead would have been much more pronounced. When welding furniture pieces you become much more strategic about your welds in terms of appearance.

@Preso58 Жыл бұрын

Full marks for parting off that big chunk of steel in the little Hercus. You've got bigger you know whats than this coward!

@ScottTurnerformeindustrious Жыл бұрын

The little Hercus is way more rigid than my old C6 lathe. Even so, there was puckering ;)

@BadBuilder Жыл бұрын

Hi scott just wondering if the commission table hieght finish of 30" do leave a clearance of 1" for the balancer under? I mean the bolt under the legs of table to make it level..

@ScottTurnerformeindustrious Жыл бұрын

Yes, if I'm putting something under like a caster wheel, adjuster or a soft cushion I would allow for that in the finished height. I hope that is what you mean?

@BadBuilder Жыл бұрын

@@ScottTurnerformeindustrious yeap that's it.. alright cool sometimes I forgot to include that to my builds.. Thanks.. By the way is the new shop?