Making Graphene could KILL you... but we did it anyway?!

  Рет қаралды 1,942,831

Tech Ingredients

Tech Ingredients

Жыл бұрын

Today's video shows you how to produce your own graphene which should only be done very carefully and with previous experience. The end of the video tests the surprising results of the composite.
Links referenced to at end of video:
www.nature.com/articles/s4158...
pubs.acs.org/doi/10.1021/acsn...
Find us on Patreon and our website:
/ techingredients
www.techingredients.com/

Пікірлер: 9 300
@LeoCoot
@LeoCoot Жыл бұрын
It's insane how he makes these huge takes without a single mistake and without any unnecessary words at all.
@erikm9768
@erikm9768 Жыл бұрын
He's a pro clearly and has been lecturing this stuff for decades I'm guessing... real-life Walter White
@jrmbayne
@jrmbayne Жыл бұрын
He said "twigger" But yes. Incredibly well spoken
@Shive1337
@Shive1337 Жыл бұрын
@@jrmbayne then twigger is the correct word
@OwenIverson
@OwenIverson Жыл бұрын
Richard Feynman's take on "knowing the name of something" vs. "knowing something". This dude knows shit.
@Unassuming_Gay
@Unassuming_Gay Жыл бұрын
He is really good, but he does take cuts, really well disguised tho.
@neoc03
@neoc03 Жыл бұрын
Being a genius is one thing. Being a genius that can effectively communicate like this is another.
@Hasaki_YT
@Hasaki_YT Жыл бұрын
@@kidmosey He is indeed wearing it upside down. Didn't even notice till I read your comment lol
@LaoZi2023
@LaoZi2023 Жыл бұрын
@@kidmosey That's what geniuses do...they wear masks upside down and forget to put on their socks. It's in the job description.
@TrevorDennis100
@TrevorDennis100 Жыл бұрын
@@LaoZi2023 I saw a documentary about Einstein and the Manhattan Project. He lived with one of the other scientists and they noted that he could not do simple things like tie a neck tie. There was also a story about him shaving without soap, so they got him a brush and soap, and apparently Albert was blown away by how effective it was. However, when the soap ran out, he went back to his old method without thinking about it. His head was on a higher plane that had no room for simple things.
@FasutonemuMyoji
@FasutonemuMyoji Жыл бұрын
@@LaoZi2023 If you have a large nose and try to put it on "the correct side up" the adjustor piece constantly slides down, especially when wearing glasses. If you are also working with fine particles, you literally can't constantly touch your mask with your contaminated gloves ever 30-50 seconds or you might as well not wear one, since you are rubbing it all over your face at that point
@antjoj5996
@antjoj5996 Жыл бұрын
I'm really sorry for you. May be you'll find a solution so that the adjustor piece doesn't slide down your nose. I never thought people could have problems like that m so sorry bro
@foreverkurome
@foreverkurome 8 ай бұрын
This guy is just everything that KZfaq content should be. There's no clickbait and he's really fun to watch. I didn't know anything about Graphene until I watched this video and I didn't care about Graphene either but this dude makes such high quality content that now I think Graphene is really cool. My science teachers never actually got us doing these type of things, most likely because my school was full of inbreds that could not be trusted not to shove people's heads in desk clamps. The only thing we ever got to do was write about what probably happens... Science isn't based on studies, science is based on experiments. This guy does something good, that is hopefully teaches kids not to be dumb fucks in science that ruin education.
@krijskovacic4938
@krijskovacic4938 3 ай бұрын
@foreverkurome Thanks for the laugh. You are so correct about the inbreds.
@UndeadCollector
@UndeadCollector 3 ай бұрын
It's also easier to teach something without getting distracted by ppl making noices.
@AntonSlavik
@AntonSlavik 3 ай бұрын
I dunno man, the risk of death was pretty clickbaity. Usually I'd feel betrayed, but everything else about the video was quality.
@droidnick
@droidnick Ай бұрын
@forever Jesus, man, sounds like science was savage with you!
@foreverkurome
@foreverkurome Ай бұрын
@@droidnick before I transferred schools my school was full of inbreds. We never got anything done. Funnily enough never ended up hating the sciences though.
@Dartheomus
@Dartheomus 7 ай бұрын
As a chemist and materials scientist, I am floored by what I just saw. Fantastic work, and damn what a result! I honestly haven't payed much attention to graphene because it just hasn't been commercially viable. However, your experiment got my wheels turning, and yeah, a semi continuous process doesn't seem very far out of reach. Thanks for the inspiration!
@craigjohnstone1461
@craigjohnstone1461 7 ай бұрын
Search- GRAPHINE OXIDE.
@gordongroves8519
@gordongroves8519 6 ай бұрын
so graphene killing you in your vaccines gets you excited! Typical scientist.
@josebrienza5852
@josebrienza5852 3 ай бұрын
The source off know haw is the Lord God Almighty, and every scientist is a growing brain in the earth know how Like tesla have said his inventions was for the good of mankind in the future. As we can see it our days! Who would sai that one single second light bulb ever made after 900 combination to discover tungstênio. And now it is impossible to know how many light are going at any time. So tesla was God inspired é. So thomas was also a do your self engienering; Now this proccess is very enlightening demonstrating how much trouble is to produz graphene really is a benediction, because somev10 or more years when graphene was presented om the science world i was wondering how it is done? of cause i tot mabe some iron scaillet in electric stow is all what it takes. But now finally i learned so far today right now it take a little more tham an pênsil core to make this material which may make air crafts 10 time bigger and aableto carrier more cargo and passageiros with out have to ever land because many years ago popular mechanics showeed a flying circulating air craft capable of going around and be overtaken by a flying taxi who would transfer cargo wille receiving its arriving passengers and loading those who will start voyage in a moving never stopping flight because the loading deck will atatch it self-to transfer cargo and detach when done landing only the flying táxi rocket size sincronizando to just in time be ready to get in or out mutch like a bus going down the city people get redy to get in and or out no confusioon So now we know haw those carriage from heaven is MABE made of some other product that can go trough the infinity carrying us like Elijah went. Because God has milhões of such vehicles up an down just as it is estates on the Bible!
@josebrienza5852
@josebrienza5852 3 ай бұрын
Thak you sir. You are a realli scientist professor and a benefetor by these demos-- stration we already know jt is a great construction material we will be able to building next dor appartament in any flor and land or take of from the window at any time as fir building can be as far each other and steel it be a city! JESUS RETURNE AND WE WILL LIVE THOUSAND YEARS UNDER HIS KINGDOWN TO LEARN ALL ABOUT. HOW TO CREAT MATERIALS t will so now we must repente and ask Jesus how it is done!
@chadsimmons6347
@chadsimmons6347 2 ай бұрын
My limited mental ability doesnt know what he did, but it knows the value of (graphene) & graphite is common as coal = big-money!
@redapproves1330
@redapproves1330 Жыл бұрын
Few years back I mentioned your channel inspired me to re-enter college to further scientific studies as an adult. It was scary at first due to the amount of self-doubt from being away from the education system for decades. I'm a sophomore now and getting mostly A's. I love every minute of being in class in learning and challenging myself. I just want you to know the profound impact you play in a stranger's life. Thank you! 🙏
@jhoughjr1
@jhoughjr1 Жыл бұрын
as an adult u have the advantage of maturity to help compared to most of your peers.
@barongerhardt
@barongerhardt Жыл бұрын
@@jhoughjr1 The maturity helps, but for me going back just a few years later, I then had a clear purpose and goal. That gave me the focus and motivation to do whatever was needed, even in the classes I didn't much enjoy. It took a minute to get back into the student mentality, but after that, the class work was easier than I had remembered. Also having just a few years of independent life experience game me so much more to draw from in the humanities courses. Two of the best decisions I have made in life were dropping out of school, and several years later, going back.
@bobweiram6321
@bobweiram6321 Жыл бұрын
Did amphetamines have anything to do with it?
@thirtythreeeyes8624
@thirtythreeeyes8624 Жыл бұрын
@@bobweiram6321 I thinks that's ironically mostly the kids who have little interest in what they're learning simply trying to get the class over. When you have a deep interest in something no drugs are needed to focus on it.
@SaintSaint
@SaintSaint Жыл бұрын
@@thirtythreeeyes8624 Coding is my cardio. Crafting, my caffeine.
@jdl3408
@jdl3408 Жыл бұрын
The translation of academic literature to practical implementations, with a perspective of real world applications is fantastic. Not to mention how entertaining and educational this is. Truly a gem of a channel!
@stxrynn
@stxrynn Жыл бұрын
THIS is the way the early pioneers pushed the envelope. A paper published about a discovery would result in a multitude of duplicate attempts to test the authors premise. Very cool.
@peppybocan
@peppybocan Жыл бұрын
that's what engineers are there for.
@stxrynn
@stxrynn Жыл бұрын
@@peppybocan Check out Charles Goodyear, self taught chemist. Or James Joule, hobby scientist, or Michael Faraday, a man with little formal education. "When we consider the magnitude and extent of his discoveries and their influence on the progress of science and of industry, there is no honour too great to pay to the memory of Faraday, one of the greatest scientific discoverers of all time." In their day, they were the explorers of the new frontier. They did these kinds of things. Trying to duplicate the lab results and prove or disprove theories. I admire them for their curiosity that drove them to discover. They paved the way. You don't have to have a degree or grant money from the government to make a difference.
@Michel-Uphoff
@Michel-Uphoff Жыл бұрын
@@stxrynn Michael Faraday.. In my opinion maybe the greatest scientists of them all.
@peppybocan
@peppybocan Жыл бұрын
@@stxrynn engineers are there to build stuff on a large scale. Chemical plants where things are produced in tonnes not in grams. My father is a chemical engineer. Building plans is where engineering shines.
@ErikPelyukhno
@ErikPelyukhno 7 ай бұрын
I’m so happy that you’re finding success on KZfaq. You’re doing such a big service to humanity by making these informative and entertaining videos. Props to your video team for making these videos look and sound good too!
@spkay31
@spkay31 7 ай бұрын
You are really a great teacher of science and lab experimentation. You certainly can hold people's attention with your demonstrations and explanations!
@TechIngredients
@TechIngredients 7 ай бұрын
Thanks!
@Nighthawkinlight
@Nighthawkinlight Жыл бұрын
Amazing video! In the papers I read from Rice they mentioned an annealing step for the graphene, but apparently that's not needed to achieve great results as you have. Really great job on this.
@onehourleft
@onehourleft Жыл бұрын
New epoxy catamaran build with graphene epoxy, please.
@ezekielnow425
@ezekielnow425 Жыл бұрын
Dr. James Tour should win a Nobel Peace Prize. He is involved in so many new technologies, which is revolutionizing the world. He is also a man who gives credit to his students when it comes to the discoveries they made. He's a great humble man.
@DiyEcoProjects
@DiyEcoProjects Жыл бұрын
Hi NightHawkinlight, I love your videos too brother. Especially the starlight one.
@robertpalumbo9089
@robertpalumbo9089 Жыл бұрын
You should collaborate together
@MrRolnicek
@MrRolnicek Жыл бұрын
@@ezekielnow425 Well ... Dr Tour works a second job as a fraud. That probably puts off a lot of people. Certainly puts ME off.
@bigonprivacy2708
@bigonprivacy2708 Жыл бұрын
Man, I wish you were my neighbor. I would volunteer all my time just to learn from you!! You rock!
@Mihoshika
@Mihoshika Жыл бұрын
"Hello Neighbor" while peeking over a fence, or "Won't you be my neighbor" neighbor?
@chloeleedow7250
@chloeleedow7250 8 ай бұрын
From the last few words, this video alone had 105 million views and the subscription is closer to 950k than not. I really hope you get your million. You were given a gift being able to teach and have fun doing it and you're using it wisely I really wish you all the success in the world, seeing you smile and laugh at science in action when the epoxy seemingly even outdid even your own expectations made me smile too! I subscribed a while ago but don't follow youtube notifications much but I saw this in my suggested and had to watch as with any of your videos when I see them come up 😊
@griffinshorts785
@griffinshorts785 6 ай бұрын
After watching the whole video I found myself genuinely excited after seeing the change in the bending modulus of the epoxy from carbon black to graphene. Your channel really is a golden find!
@TheEpicLolz007
@TheEpicLolz007 Жыл бұрын
I do not usually comment on KZfaq videos, but have to express my congratulations for the great job you are doing in this channel. My PhD was in Chemistry/Materials science and I can't believe how well you are presenting these subjects. Kudos !
@TechIngredients
@TechIngredients Жыл бұрын
Thank you very much!
@aaronschocke2147
@aaronschocke2147 Жыл бұрын
I laid a tile floor for the president of a composite materials engineering group that developed the materials for forms making for Lockheed Martin. He gave me some very interresting protype high ductility iron composite material samples as a gift and a flashdrive containing some documentation on how to use the materials for post forming machining, as well as old pictures of the material being put to work at LM! 😂 I bet we would love to play with this stuff, if he hasn't already. It's amazing the people you run into!
@aaronschocke2147
@aaronschocke2147 Жыл бұрын
I am sure you two would have loved to chat. Lol
@doncarleone973
@doncarleone973 Жыл бұрын
@@aaronschocke2147 that sounds friggin awesome! He just blew your mind lol
@aaronschocke2147
@aaronschocke2147 Жыл бұрын
@@doncarleone973 Oh for sure. I wish I had more time to sit and listen to his stories. My Dad's best friend's dad was an aerospace engineer who owned a company developing and producing high precision bearings for NASA and aviation. From just the two times I have been blessed with the chance to sit down with him, I already felt like I have known him a lifetime. He is so full of life and sharp as a tack. We sat on the upstairs catwalk doing a puzzle and talking about all kinds of stuff in science until 2:00 in the morning!!! Just to sit and listen...
@eddieelizabethhitler3259
@eddieelizabethhitler3259 Жыл бұрын
The range of scientific disciplines you demonstrate in such a professional manner never ceases to impress me. I know people who specialise in some of these fields that can't explain the concepts as well as you do. Thank you for all the information and inspiration.
@TechIngredients
@TechIngredients Жыл бұрын
Thanks! The problem might actually be the specialization. The different disciplines are arbitrary distinctions within a universal scientific method. Generalists have an advantage once they have enough experience.
@laurahaaima1436
@laurahaaima1436 Жыл бұрын
Yeah.. free education on such a high level is astonishing. Maybe add a crypto adres for tipping maybe.
@eddieelizabethhitler3259
@eddieelizabethhitler3259 Жыл бұрын
@@TechIngredients Indeed, specialists can get too lost in detail and end up in a "can't see the forest for the trees" situation.
@petevenuti7355
@petevenuti7355 Жыл бұрын
How you manage to not to be the "master of none" trope is what is very impressive. It's hard not to spread one's self too thin.
@lolilollolilol7773
@lolilollolilol7773 Жыл бұрын
@@laurahaaima1436 Just subscribe to their Patreon
@nexaentertainment2764
@nexaentertainment2764 13 күн бұрын
"I don't care if I made marzipan" man... the deadpan on that sent me rolling. long time viewer, rarely sub to channels but damn you are amazing.
@rigilchrist
@rigilchrist 5 ай бұрын
Your demonstrations are extraordinary, thrilling. You put a huge amount of thinking, designing, and engineering into them - and also into your easy-to-follow explanations of complex processes. You deserve 5m subscribers and I hope you get them. Bravo!
@JamesTheAxeThrower
@JamesTheAxeThrower Жыл бұрын
I really love the “walking into another room” way of transitioning from one experiment to the other! Please keep filming and editing like this!!!!
@TechIngredients
@TechIngredients Жыл бұрын
Thank you! Will do!
@jzeman
@jzeman Жыл бұрын
Editing has leveled up
@razcarsey6635
@razcarsey6635 Жыл бұрын
Yeah, that was great!
@peterp-a-n4743
@peterp-a-n4743 Жыл бұрын
@@TechIngredients don't overdo it though. Like anything. Keep the editing crisp and snappy. Nobody has time for transitions or fillers in this day and age. (Also, your glove color changed so I didn't buy it. Do it intentionally with subtle Easter eggs for profit!)
@zapa47
@zapa47 Жыл бұрын
Finally, a use for my electron microscope! 😂
@manugrend
@manugrend 7 ай бұрын
Wow, wish most teachers were like him, school/learning would take on another level! It's amazing how much time is wasted in our modern day schools with useless information when you could be learning like this! Top content 👍💯
@nickspeakstruth133
@nickspeakstruth133 7 ай бұрын
That’s by design! The wealthy and “powerful” (notice I use the quotes to condescend this because I believe no earth dwelling human is truly powerful) do not wish to educate, but indoctrinate the youth. A civilization of brilliance and geniuses would see through most of the charades and gimmicks used to exploit profit and make the false economy go round and round. God forbid people become educated and fully understand that currency has no tangible value and the banking system is entirely based off empty promises. Since so many poor people buy the narrative, they’re willing to trade the most precious commodity known to human existence, time. All for what? A piece of paper that claims they have worth. Quite despicable really. Point being, they need uneducated useful idiots to make them enough money to fund the brilliant scientists exclusively working for them and to their benefit. Without that upper hand, how would they continue to maintain their perceived class rank? It’s all a fugazzi bud. Now you see!
@1288Allhart
@1288Allhart 6 ай бұрын
I totally agree, I drank what I thought was milk in a glass jar when I was a two year old kid and it turned out to be turpentine so I died 5 times my brain completely rewired itself and I from there started having issues with learning like everyone else turns out I have my own way of learning and it's actually less complexed and reaches a point in only a fraction of the time. The point we all learn in different ways sometimes in cross-referenced patterns that shorten the thought processes. This brilliant men is non-stressful in his thoughts which is actually very easy to understand and enjoyable to hear, I can lesson to him all day.😮
@jackwinstone5309
@jackwinstone5309 8 ай бұрын
Amazing video. It's great to see your passion when you're showing us the process and the results.
@servetc1970
@servetc1970 Жыл бұрын
This man is the perfect science educator, he deserves the top place on youtube. I am telling every student I meet to watch his videos and subscribe. I cant describe how grateful I am for his extremely informative videos. Well done and thank you.
@littlepoolefam3
@littlepoolefam3 Жыл бұрын
He is pretty good at explaining things, but isn't his mask upside down?
@ShamblerDK
@ShamblerDK Жыл бұрын
I did not plan on watching an hour-long video at this time, but you had me mesmerized only a few seconds in. This was SUPER interesting.
@WakarimasenKa
@WakarimasenKa Жыл бұрын
Hah! I didnt even realize it was that long, till I read your comment :P
@Hreimr
@Hreimr Жыл бұрын
I wholeheartedly agree :)
@LaoZi2023
@LaoZi2023 Жыл бұрын
Same here. I was going to bed an hour ago. And I couldn't stop watching this until the end.
@user-nj2wb6wh2k
@user-nj2wb6wh2k 2 ай бұрын
Dude, you're amazing. You just turned graphene production into a cake recipe.
@wmattaej
@wmattaej 9 ай бұрын
Thank You so very much! Please stay safe as you work. I love the way you teach and share knowledge.
@bobstovall9570
@bobstovall9570 Жыл бұрын
From the very first video you published to this one, you have never failed to impress me with your knowledge of whatever subject you present, the thoroughness of your processes and procedures and your absolutely unparalleled pedagogic skills. I once commented that Dr. Richard Feynman would approve. I now believe that he might even be a little bit envious. Looking forward to celebrating your millionth subscriber and more of your brilliant work.
@TechIngredients
@TechIngredients Жыл бұрын
Thanks! I met him...
@FirstLast-tx3yj
@FirstLast-tx3yj Жыл бұрын
@@TechIngredients will you ever produce H2O2 based on the CAT groups process?? Or any easy to do efficient process
@mehe521
@mehe521 Жыл бұрын
@@TechIngredients could you tell a little about how you met Feynman..? that would be interesting.. also if it`s not too personal, what was your learning path? fabulous video, thank you
@Tree_64
@Tree_64 Жыл бұрын
Almost one hour pure solid entertaining knowledge, never been so thankful to find a channel like this.
@TechIngredients
@TechIngredients Жыл бұрын
Welcome!
@pm1234
@pm1234 9 ай бұрын
I totally agree. It feels like old quality TV programs (maybe it never really existed), now in HD.
@user-bi8gq9df8m
@user-bi8gq9df8m 8 ай бұрын
Never seen this guy before. I'm 7 minutes in and paused to read comments and subscribe. Got me at "there's not enough Scotch tape in the world to build a bridge". I feel the calmness and wisdom of my old lecturers washing over me again and I forgot how much I miss that, absolutely love it.
@WayneJohn-fq6cn
@WayneJohn-fq6cn 7 ай бұрын
Damn didn't even realize it was an hour long
@bc4yt
@bc4yt 7 ай бұрын
​@@TechIngredientsamazing. I wonder, would it be possible to laser sinter grapheme by blasting thin layers of dust with a laser?
@joelwold1604
@joelwold1604 2 ай бұрын
I really appreciate your videos. Very excellent in breaking the information down so it’s easy to digest while still covering as much technical information as possible in videos which aren’t too long to watch while I make myself dinner or take a lunch break.
@toddtrillo7445
@toddtrillo7445 8 ай бұрын
Absolutely captivating, was glued from start to finish , very glad to have found this channel, will introduce to my son as well , thank you very much
@BioMedUSA
@BioMedUSA Жыл бұрын
I can only imagine the amount of behind the scenes time and effort by you and your son that go into making and editing these incredible videos! Outstanding work to both of you! This one in particular was hit out of the park at so many levels.
@TechIngredients
@TechIngredients Жыл бұрын
Thanks!
@magnitudematrix2653
@magnitudematrix2653 Жыл бұрын
The medical technology coming with graphene will be next level.
@justinw1765
@justinw1765 Жыл бұрын
@@magnitudematrix2653 Not just medical. Energy storage, composites, building/construction, energy production, thermal management, etc. Many different areas and fields could benefit from high quality, true graphene because of the unique and extreme multiple attributes.
@robaust3049
@robaust3049 Жыл бұрын
I really like how you explore all the corners of every experiment compared to scratch the surface. Can’t wait for the “we ain’t done yet…”
@peterannear
@peterannear 7 ай бұрын
Absolutely wonderful, educational and informative. I can see, feel and taste the work that went into this piece. I love it!
@Yeet42069
@Yeet42069 7 ай бұрын
An absolutely banger of a video, great in every way and very informative! Thanks for this, definitely subscribed.
@TechIngredients
@TechIngredients 7 ай бұрын
Thanks!
@mauriciocapovilla
@mauriciocapovilla Жыл бұрын
This is the best channel on KZfaq by far. Better than any university classes I took. It is so entertaining to learn this way, seeing science in practice and being used to do useful stuff. I learn so much with you. I really wish this channel grow much more and thrive. Just keep on doing! Thank you so much. Best wishes
@totallypointlessvideos3832
@totallypointlessvideos3832 Жыл бұрын
100%. Makes nanotech look easy. Amazing channel.
@xylfox
@xylfox Жыл бұрын
The old bias.The video one is looking(politics,tech,entertainement) is ALLWAYs the best on youtube. Otherwise you wouldn´t look it 🤣.
@stephencroft761
@stephencroft761 11 ай бұрын
As a regular blue collar guy who is fascinated by the world around me I’d just like to say I find your videos to be fantastic. From your clear explanation and wit it’s honestly a pleasure to watch. Thank you, and the camera son, so much.
@stihlhorsepeppers6608
@stihlhorsepeppers6608 7 ай бұрын
Hey brother, glad to see another B.C man watching,I'm sure you're thinking same thing I am so I'll bring my welder if you can find us some Glass tube ---look out J.B weld--- were coming lol
@I_leave_mean_comments
@I_leave_mean_comments Жыл бұрын
This is... by far... the best channel on KZfaq. I really mean that. You guys are AMAZING. Thank you for all you're doing.
@TechIngredients
@TechIngredients Жыл бұрын
Wow, thank you!
@newtonbomb
@newtonbomb Жыл бұрын
By far....
@TheExplosiveGuy
@TheExplosiveGuy Жыл бұрын
That wasn't a mean comment!😉🤣
@I_leave_mean_comments
@I_leave_mean_comments Жыл бұрын
@@TheExplosiveGuy Every so often I leave non-mean comments.
@SaintSaint
@SaintSaint Жыл бұрын
@@I_leave_mean_comments I'll restructure your comment in a negative and ludicrously toxic way so the circle is complete and the Universe is balanced. "This channel shadows all other channels on KZfaq and puts an asterisk by each of the pretenders on KZfaq who dare to explore science." Toxic? Check. Stupidly worded? Yes check. Universe balanced? nope. oh well. Lesson learned? meh.
@edakimling133
@edakimling133 6 ай бұрын
Fascinating stuff...so well filmed, great angles, great explanations...superbly done, bravo
@cvermejo
@cvermejo 8 ай бұрын
Very good job, entertained and getting tons of knowledge and answering the common questions, how, why, where. I enjoyed your video, thanks a lot.
@schiaucugabriel6202
@schiaucugabriel6202 Жыл бұрын
Every time, I see the lenght of your videos and I tell myself "you know, this is too long, I will get bored". And every time, I don't know how but I find myself at the end of the video without noticing the time passing and feeling fascinated and enriched. Keep up the good job!
@drawincode1800
@drawincode1800 Жыл бұрын
Your comment inspires me to watch this but I still doubt I will.
@schiaucugabriel6202
@schiaucugabriel6202 Жыл бұрын
@@drawincode1800 I am the analytical type, I like it thorough. Tech Ingredients is on my likings.
@medicinaljourney5505
@medicinaljourney5505 Жыл бұрын
@@drawincode1800 Why you forcing yourself to watch stuff you dont want to?
@drawincode1800
@drawincode1800 Жыл бұрын
@@medicinaljourney5505 I'm interested but I'm no chemist.
@88_TROUBLE_88
@88_TROUBLE_88 Жыл бұрын
@@drawincode1800 Chemistry, per se, has a small roll in this content.. Most of it is engineering, but you do you, ese.. Oh, and while I'm commenting ITT - What's with this OP's attention span?? What are you? 8 - 12 yrs old? Jesus Christ on a bike, kid - It's only an hour ffs
@charly4594
@charly4594 Жыл бұрын
I am a retired engineer and truly miss the excitement of being involved in innovative technology. Watching your projects is so invigorating for me and helps to keep me cognitively current in so many engineering disciplines. You are a fantastic educator and you should be very proud of what you do!
@alex00731
@alex00731 Жыл бұрын
It is very interesting but alot of responsibility still fun to work with graphite. I enjoyed working with graphite and the honey combs
@christianblack7900
@christianblack7900 Жыл бұрын
this was amazing. knowledge freely given. both liked and subscribed, also transcribed. thanks very much.
@joonasvaris
@joonasvaris 7 ай бұрын
This is one of the best videos i have ever watched! Super interesting and well made🤯👌thank you and keep doing these!
@zfmag
@zfmag Жыл бұрын
I love how this was not just a "and now we have graphene, that's it" but that you demonstrated measurable and reproducible results with the epoxy rods. That actually blew my mind on how cool this stuff is.
@zef3k
@zef3k Жыл бұрын
I was surprised you can just grind it up and add it to stuff. I thought there would be some process in which it would need to be delicately separated an... nope! Shake 'n pour baby!
@Enderplays12
@Enderplays12 Жыл бұрын
@@zef3k It's not like you're strong enough to break the bonds lmfao. That's the beauty of the material. It's such a hard-ass that once it's done, you can't fuck up. If it broke, it's not graphene. No loss.
@zef3k
@zef3k Жыл бұрын
@@Enderplays12 Well I mean more that it could be used as an additive in such 'small' amounts. I previously thought it had to be manually manipulated into a usable object for some reason.. x.x
@alexmacpherson7451
@alexmacpherson7451 Жыл бұрын
I honestly never thought I could sit through a 56 minute video without skipping anything at all. But that was captivating the whole way through and and the right mix of teaching and science without dumbing it down too much. Just splendid job, I look forward to future projects/videos. Bravo
@manzoorhussain1072
@manzoorhussain1072 Жыл бұрын
@landaucorl5390
@landaucorl5390 Жыл бұрын
wow, it was 56 minutes indeed 😀
@alsetalokin88
@alsetalokin88 Жыл бұрын
you can speed up the video with 2x
@malachite072
@malachite072 9 ай бұрын
@@alsetalokin88 much harder to process info and understand everything, also very annoying to listen to
@philaddison2362
@philaddison2362 9 ай бұрын
^^^^This^^^^
@davidbordwell8346
@davidbordwell8346 5 ай бұрын
That just blew my mind. Amazing video. Excellent explanation. I come from an electrical engineering background and seeing that set up was pretty cool. Havnt been in the lab in over 25yrs. Look forward to future videos.
@mateuszQRDL
@mateuszQRDL Жыл бұрын
Why do I always delay watching these videos? I get scared by the length and a supposedly mundane subjects, but after some weeks of delay I always end up glued to the screen for however long it takes. Amazing educational skills.
@MrNeverseeme
@MrNeverseeme Жыл бұрын
I know right... same here. I almost forgot about this channel when they didn't post for a minute cause he burned his eye out popping fireworks. Glad to see there back at it.
@HCG
@HCG Жыл бұрын
Same haha
@thenoseknows9391
@thenoseknows9391 Жыл бұрын
OMG, I do the same thing 💯💯💯👍🏽👍🏽👍🏽😄😃🤣😀
@steveo6034
@steveo6034 Жыл бұрын
​@@MrNeverseemeNH hi
@benlarsen7781
@benlarsen7781 Жыл бұрын
I listen at double speed. Once you get used to it, you will never go back.
@harolddavies1984
@harolddavies1984 Жыл бұрын
As an inorganic/nuclear chemist from the 1960-80s, these demonstrations are excellent. While there were films back in the day, they were rare. Your channel is my recommendation to current students. Congratulations!
@darkshadowsx5949
@darkshadowsx5949 Жыл бұрын
As a carbon based lifeform from 1990 to present time, this demonstration was brilliant and better than most science teachers could come up with.
@A2Z1Two3
@A2Z1Two3 Жыл бұрын
I’m 60+ retired and really enjoy these videos although I will never need this knowledge, I value having it .
@bornrookie1664
@bornrookie1664 2 ай бұрын
You are liked, subscribed, and commented sir! I mean this in the best way possible, you are one of the KZfaq madmen I love to watch. Keep up the good work!
@szogun1987
@szogun1987 Жыл бұрын
You are creating valuable content faster than I can even imagine to duplicate.
@SarahBlankk
@SarahBlankk Жыл бұрын
I'm not a science person -- I enjoy learning and think it's nifty, but I don't know a whole lot -- and I wanted to thank you for how accessible this was, without it feeling like you were "dumbing it down" for me to understand. You're a fantastic educator!
@TheChronova
@TheChronova Жыл бұрын
thats the great part about *good* teachers, you *can* become a science person by listening to enough of them. really sad how good teachers are in such short supply
@jeffkunkler9299
@jeffkunkler9299 Жыл бұрын
good on you for watching it!
@Robert08010
@Robert08010 Жыл бұрын
If you enjoy this; you probably ARE a "science person", you just never realized it.
@gabrielsansar6187
@gabrielsansar6187 Жыл бұрын
I don`t know you Sarah.. but I know you are a hell of a lot smarter than you think you are.... `dunning kruger`
@murrayryan4287
@murrayryan4287 Жыл бұрын
For sure! Almost every episode is like that for me to, but the episode that hooked me for life has to be "Shaking Buildings Over a Mile Away!" kzfaq.info/get/bejne/op9zfJl8uLyZZmQ.html 🙂 Every time I watch it I can still not imagine what neighbors were thinking when this happened. WOW!!
@grosbarbu6468
@grosbarbu6468 7 ай бұрын
I often watch science videos, but this video is the best one I've watched so far. There's nothing too much, no frills, and I learned a lot. to share as much as possible. Thanks a lot.
@douglassimpson8006
@douglassimpson8006 8 ай бұрын
A year ago I bought the book "Graphene" by Les Johnson & Joseph Meany and found it to be a facinating read but your video really brought home the amazing properties of this material. Your teaching style captured my attention for the entire hour and you explained things in layman's terms that were easy for me to understand. Great job!
@TechIngredients
@TechIngredients 8 ай бұрын
Thanks!
@sinyefendrich6360
@sinyefendrich6360 Жыл бұрын
I am not even interested in physics, chemistry or material science - yet you caught my attention on this topic and came up with an interesting presentation. Thank you for getting me excited about graphene.
@johnpounder1829
@johnpounder1829 Жыл бұрын
Me too
@markbowles2382
@markbowles2382 Жыл бұрын
Me 3
@ElGatoLoco698
@ElGatoLoco698 Жыл бұрын
He's a master at it as evidenced in their other videos.
@patrickhogan3101
@patrickhogan3101 Жыл бұрын
well done uou would of made a great teacher
@Michel-7.7.7
@Michel-7.7.7 Жыл бұрын
​@@patrickhogan3101 He'd be probably a good english teacher too. English 101 would've been = would have been! Not would of been✌️😁
@just1ofgod
@just1ofgod Жыл бұрын
I am a pretty busy person I work in IT and am a father of 3 which takes loads of my spare time so I don't often watch your longer videos but when I get the chance they are always so interesting thanks for the content and keep it up!
@jimj2683
@jimj2683 Жыл бұрын
Why did you have kids?? It will just ruin your life.
@coosiecooify
@coosiecooify 9 ай бұрын
Bravo! Great science and in-depth description! Keep ‘em coming.
@Guh_roomer_Gravedigger
@Guh_roomer_Gravedigger 3 ай бұрын
Found this channel by accident, so glad I did. Great Channel.
@Just1Spark
@Just1Spark Жыл бұрын
I built a 16' fiberglass/carbon fiber canoe years ago (using epoxy resin and graphite), weighed about 22lbs iirc. And the whole time watching this, all i could think about was how much lighter and or stronger it WOULD be with graphene.
@lesliefranklin1870
@lesliefranklin1870 Жыл бұрын
Also, imagine for aircraft, where weight matters much more.
@manp1039
@manp1039 Жыл бұрын
how would you have made it lighter? would have have done so by changing the design? perhaps by decreasing the size and/or quantity of certain support structures? I would think that if you used the same design.. it would essentially be the same weight.. but would be much stronger at that weight?
@RoughSmoothie
@RoughSmoothie Жыл бұрын
@@manp1039 Basically, if it's stronger, it doesn't have to be as thick
@SaintSaint
@SaintSaint Жыл бұрын
@@RoughSmoothie Yep, or possibly even cheaper. Might be able to buy more simple weaves and get the same results. But at a certain point, 2lbs isn't much more practical than 22lbs since the disadvantage of the canoe is no longer weight, but the exertion spent carrying it through winds and bulky awkward navigations.
@Just1Spark
@Just1Spark Жыл бұрын
@@manp1039 If you are using stronger material, you can use less of it.
@andylane7142
@andylane7142 Жыл бұрын
This channel is truly next level. An international treasure. Thank you for everything you do. I hope you continue to grow so your budgets can allow whatever you might like to show us.
@oscardiazrojas9049
@oscardiazrojas9049 7 ай бұрын
I already subscribed from Colombia. The way you do your experiments is exciting and I love the scientific method used. Congratulations and go ahead!
@TechIngredients
@TechIngredients 7 ай бұрын
Welcome aboard!
@DJ-Eye
@DJ-Eye 6 ай бұрын
At the risk of repeating other commenters, "Why weren't teachers at school this informative and engaging" Pure brain-candy, thanks. Subscribed. 👍
@TechIngredients
@TechIngredients 6 ай бұрын
😘
@llsmith8271
@llsmith8271 Жыл бұрын
Love how you tear through the physics/chemistry/electrical without spoon feeding beginner concepts. The pace is wonderful. My A.D.D thanks you. I'd have 3 doctorates by now if this guy had been my physics/chem teacher
@COKENCAKE
@COKENCAKE Жыл бұрын
Don't give yourself that much credit, you likely would've had another excuse.
@novaenricarter705
@novaenricarter705 Жыл бұрын
​@@COKENCAKE You turned his flattery into something negative, as per usual for KZfaq.
@liilllllliil9711
@liilllllliil9711 Жыл бұрын
@@COKENCAKE is your penis really that small homie?
@elvispressedtalot9899
@elvispressedtalot9899 Жыл бұрын
I really believe this!. If he was making these videos before I went to grade 9!.
@andrew8501
@andrew8501 Жыл бұрын
Somehow this also makes sense to me and I've only had high school level courses on these topics. This guy is a hell of a teacher.
@SmolPotatowo
@SmolPotatowo Жыл бұрын
I can't wait for you guys to hit 1m subs. You really deserve it, and more. The amount of technical expertise and knowledge you share is so valuable and more people need to see it.
@lighting2029
@lighting2029 8 ай бұрын
Thanks for showing us all that you do. Love it.
@sailr
@sailr 8 ай бұрын
LOVE your workshop!
@stopthephilosophicalzombie9017
@stopthephilosophicalzombie9017 Жыл бұрын
I never imagined I'd have the patience to sit through an hour long graphene production video but your explanations were so fascinating it flew right by. Thank you. I almost want to try to set up my own production facility now! Lol.
@pastblaster3285
@pastblaster3285 Жыл бұрын
It only lasts 30 minutes if you goose it up to 2x playback speed .....What a well done video ....Be very careful with the juice ElectroBoom wannabee's......... This is no joke ........
@tomijohannes
@tomijohannes Жыл бұрын
What!? Was it an hour? I was too into it that I lost track of time...
@brandonbrand2338
@brandonbrand2338 Жыл бұрын
Nearly an hour well spent.
@sinformant
@sinformant Жыл бұрын
This is pretty interesting. Makes me wonder what kind of strength one could get out of a 3d printed object using an sla resin printer and simply adding graphene to the printer resin. I would love to see this done and tested! Im sure you wouldn't mind the free idea for a new video😉
@blackmafiax
@blackmafiax Жыл бұрын
very good point, must be tested. 🧐
@BRUXXUS
@BRUXXUS Жыл бұрын
Ooooh, yeah!
@sana-cm7oc
@sana-cm7oc Жыл бұрын
I want to see this.
@motosk8er2
@motosk8er2 Жыл бұрын
Great idea. Maybe also worlds best thermal compound V2.0.
@ArnaudMEURET
@ArnaudMEURET Жыл бұрын
Excellent idea! Please family crew, try this ! 😍
@BobRoffey
@BobRoffey 2 ай бұрын
I have just watched (in awe) the Graphene video and even though I do not understand very much of it, I was fascinated! Your presentation style is fantastic, thank you so much for making it easy for a non scientific person to follow. I have liked and subscribe. Fingers crossed for you with the one million subscribers this year.
@rafaelcardoso6881
@rafaelcardoso6881 3 ай бұрын
This is the most amazing video i watch in my entire life !!! I was astonished with the properties of the material and with the explanations. I subscribed right now (and by the way you have almost 1 million subscribers ! God Bless ! Thank you
@yashkhd1100
@yashkhd1100 Жыл бұрын
This was brilliant..!! The most impressive part is your demonstration of how even little quantity of Graphene can make huge difference with ur stiffness tests. I will definitely wait for video on other more scalable technique you just mentioned..!!
@melody3741
@melody3741 Жыл бұрын
Holy CRAP. You answered EVERY QUESTION THAT CAME INTO MY HEAD, AND you didn’t fall into a single one of the traps that other youtubers do. What a great video
@jeffberkeley
@jeffberkeley 7 ай бұрын
Great stuff. Thanks. This would have made a terrific presentation for the AP chemistry classes I used to teach.
@jon24918
@jon24918 7 ай бұрын
My wife can hear this video playing in the background while shes getting ready for work. She busted out in laughter when you asked "Now, if youre still watching." 😅
@Registered_Simp
@Registered_Simp Жыл бұрын
The implications of the method you mentioned at the very end are staggering. Graphene-reinforced composites on industrial scales may not be very far off in the grand scheme of things. What a time to me alive for material scientists
@novicenova
@novicenova 11 ай бұрын
Exactly. I would enjoy a job working with someone to test Graphene in not just epoxies but also many plastics, resins & adhesives. I know of so many things that this would be applicable to. Especially in Aerospace, Nautical, DOD, & Manufacturering.
@marekstanek112
@marekstanek112 8 ай бұрын
Armor was the first thing coming to my mind.
@Registered_Simp
@Registered_Simp 8 ай бұрын
@@marekstanek112 **Casually shaves 10 tons off an M1 Abrams**
@davidberger3472
@davidberger3472 8 ай бұрын
I kind of want to use this method to make the worlds strongest glue gun stick
@franklee2683
@franklee2683 7 ай бұрын
​@@novicenovathe.covid.jabb. Yes....its in there Wilbur...
@NewJocular
@NewJocular Жыл бұрын
You're on the forefront of material science and making it fun and interesting. Thanks!
@pilotusa
@pilotusa 8 ай бұрын
I stumbled on this video and decided to watch simply because I had heard of graphene, heard about its great potential and wanted to learn more. About halfway through I realized how much I missed watching "Mr Wizard" from when I was a youngster. Then I realized these experiments were way way more intereting than that old TV show. Very impressive. Happy to be a new subscriber and I will be looking at more videos from Tech Ingredients. Thank you!
@TechIngredients
@TechIngredients 8 ай бұрын
Thanks and welcome!
@scottsammons1666
@scottsammons1666 4 ай бұрын
I was glued to the whole video. Well done.
@dpheaslip
@dpheaslip 9 ай бұрын
I’ve got to hand it to you. Your presentation style and ability to talk naturally to camera is better than many TV presenters.
@fkfontaine
@fkfontaine Жыл бұрын
the value of this content is amazing. the fact that you share this for free on youtube makes it even greater!
@abrienel6558
@abrienel6558 7 ай бұрын
Brilliant! Every part of this is just fascinating.
@nigeleden1613
@nigeleden1613 8 ай бұрын
Very listenable and informative. 👍👍👍
@CH3TN1K313
@CH3TN1K313 Жыл бұрын
This was probably the most important, informative, and innovative videos you'll ever see on KZfaq. If you guys get the continuous production method going, you'll be rivaling any engineers alive today.
@mffaruqi6830
@mffaruqi6830 Жыл бұрын
Can't agree more.
@saitavr
@saitavr Жыл бұрын
That is one of the most sophisticated experiments I've seen on your channel, my congratulations on the success. 🎉
@MyrLin8
@MyrLin8 8 ай бұрын
Some of these comments are just amazing :). Thank you 'Tech Ingredients'; excellent video lab/lecture on an excellent subject.
@julioreija8052
@julioreija8052 7 ай бұрын
Thank you for sharing your knowledge! ❤
@airmailman1971
@airmailman1971 Жыл бұрын
Please don't stop doing your video's. You have an amazing ability to teach in such a way that is informative, understandable, and very interesting. Love them!!
@TheGroundedCoffee
@TheGroundedCoffee Жыл бұрын
This channel is such a (hidden) treasure. I'm learning a lot every time I watch one of your video's. I like to tinker and hobby around, though not nearly to the extent as you are doing and probably never have the resources for it. So seeing an engineer like yourself at work brings much joy!
@dr123hall
@dr123hall 8 ай бұрын
Just incredible information and demonstration! Thanks so very much!
@moiraatkinson
@moiraatkinson 8 ай бұрын
Subscribed - good luck with the channel. Fascinating stuff!
@TechIngredients
@TechIngredients 8 ай бұрын
Thank you!
@alocin110
@alocin110 Ай бұрын
This is the second time I hit your channel. This is not a channel to spread knowledge but it is an Institute of learning. This episode was breath-taking with clarity and tons of information. I subscribed to your channel. You put a tremendous amount of efforts and time to share your knowledge with the public. Thank you so much.
@jackpeterson6036
@jackpeterson6036 Жыл бұрын
I am shocked that it worked that well, especially considering the low concentrations! I think it would have been interesting to see it compared to maybe some kind of powdered steel or ceramic/glass in the bending tests as a comparison between non-carbon based materials. Also, further testing for pure compression, tension, and shear would be interesting to see, although difficult to make repeatable in a home shop. Regardless, great work!!!
@philipgwyn8091
@philipgwyn8091 Жыл бұрын
That 0.6% produced 750% increase in strength. All doable "at home."
@SaintSaint
@SaintSaint Жыл бұрын
Yeah. The property wasn't really tapering off much. It's still almost linear and I'm not comfortable extrapolating. If 0.3 is about 400% and 0.6 is 750% increase. that makes a linear graph similar to y = 1166.66666667x + 50. the "+ 50" is probably due to the crude but effective measuring technique. It should be "+ 0." If we had a third data point, we could make a logarithmic function and then know how much graphene to add to get a specific increase in toughness. I'm just blown away by the results. I bet results taper off rapidly though. 12% graphene probably doesn't yield near 15,000% increase in toughness. I'm thinking it would yield about %3,000 increase, but it's really hard to say from these two numbers. This is so exciting!
@weedfreer
@weedfreer Жыл бұрын
YES! Add it to some sort of LASER deposition process maybe...that could be really interesting
@matthewday7565
@matthewday7565 Жыл бұрын
Would also be interesting to compare with ordered reinforcement, though how much carbon or boron fibre would 0.3% be
@justinw1765
@justinw1765 Жыл бұрын
@@philipgwyn8091 Technically doable at home, but have fun with large capacitor banks. I'm not so brave, and I'm not even scared of dying. I'll stick with focusing on making carbonized cellulose nanocrystals. Much easier, safer, cheaper, and can make in true bulk (many grams vs miligrams per batch).
@MarkusMeridius
@MarkusMeridius Жыл бұрын
Damn, gotta say I really enjoy the straight forward talk. You don't over explain anything, and it's easy to follow which isn't an easy combination. I had to pause near the end because your giving real life examples of application for even probably independent contractors is stellar. So many people talk about highly complicated subjects without this down to earth approach, and it's something that should definitely be in school more. "Why is this important? Where can I use it?" Fantastic commentary.
@ericgorder1
@ericgorder1 7 ай бұрын
That is so amazing. Thanks for showing us this!
@user-sj3hp4rm9j
@user-sj3hp4rm9j 8 ай бұрын
Excellent lesson on graphene! This is the best video by far from any other teaching, in quality, in knowledge transfer, and clarity. Thank you!
@aszovathy
@aszovathy Жыл бұрын
Please don't stop making these videos! To me it's not just about learning about the given topic you're talking about, but also how you explain to-the-point, it is also a perfect English class! Thank you! 🖖
@gingerageousgames613
@gingerageousgames613 Жыл бұрын
Fantastic video. I just voluntarily watched an hour science class. I can’t help but think how amazing our world would be if people like you were our education system.
@beanoneya
@beanoneya Жыл бұрын
He said to someone above, "the future isn't institutional, it's network". You're learning it, right here. It's awesome.
@gomahklawm4446
@gomahklawm4446 11 ай бұрын
Education isn't the problem. Ignorant, arrogant children are. You're there to get educated, not to be entertained. America is doomed with the amount of entitlement even the YOUTH have. Parents, get a grip on YOUR children, or things can and will get worse.
@hassant9788
@hassant9788 9 ай бұрын
one of the most interesting i ve seen so far on youtube bravo i m sure you will reach the million of subs
@lornalewis9447
@lornalewis9447 Ай бұрын
Listening to you has been very relaxing. Like potato chip bags being wrestled, or crunching if papers, very soothing. ❤❤❤
@mica4153
@mica4153 Жыл бұрын
This is incredible. I am astonished you were so successful with this, with everything I’ve read into graphene I didn’t think it was in our reach any time soon. I can’t wait to see more about this.
@JamesBakerOhio
@JamesBakerOhio Жыл бұрын
Your content and commentary, with rare exception, grows more and more inspirational and deserving of commercial sponsorship with each passing year. You are better than Don Herbert could have ever hoped to be, and he was renowned in his role as Mister Wizard. I am amazed at your determination and the thoroughness with which you cover topics. I would encourage you to cover more trivial, basic scientific material and STEM subjects for younger audiences. We need more people like you to nurture scientific curiosity. Far too many kids grow up with parents who are either ill equipped, or worse uninterested in igniting the spark of curiosity in their child. Content such as this can kindle that spark and foment life changing inspiration in a young mind. Thank you for your efforts 💖💖
@jcmate1692
@jcmate1692 7 ай бұрын
Dude your on to it the best scientific breakthroughs have come from back yarders like yourself not guys working for big scientific companies
@im12runb4trouble
@im12runb4trouble 7 ай бұрын
Very informative and interesting. Thank you.
@bradjackson497
@bradjackson497 Жыл бұрын
I have heard Dr. Tour speak often about the development and capabilities of graphene. When I saw that you were going to create some, I HAD TO WATCH. You did a terrific job of explaining the process to a non-scientist. The testing at the end was the real kicker. The proof is in the bending! I subscribed. You're 1 subscriber closer to 1 million.
@timdaniels2100
@timdaniels2100 Жыл бұрын
Ditto, now 2 subs closer.
@mattb5141
@mattb5141 Жыл бұрын
3
@benni5541
@benni5541 Жыл бұрын
First 3min already earned you a like as the explanation was better than 99% of other "explanation" videos on youtube. You are a master in sientific education. Kudos.
Why It Was Almost Impossible to Make the Blue LED
33:45
Veritasium
Рет қаралды 21 МЛН
COULD SATELLITE LASERS REALLY DO THIS?...
33:49
Tech Ingredients
Рет қаралды 401 М.
Do you have a friend like this? 🤣#shorts
00:12
dednahype
Рет қаралды 6 МЛН
Can You Draw The PERFECT Circle?
00:57
Stokes Twins
Рет қаралды 71 МЛН
Barriga de grávida aconchegante? 🤔💡
00:10
Polar em português
Рет қаралды 83 МЛН
Маленькая и средняя фанта
00:56
Multi DO Smile Russian
Рет қаралды 3,7 МЛН
DID WE JUST DEBUNK THIS GENERATOR...!?
21:54
Tech Ingredients
Рет қаралды 1,5 МЛН
The Big Misconception About Electricity
14:48
Veritasium
Рет қаралды 22 МЛН
Making purple gold
53:20
NileRed
Рет қаралды 15 МЛН
What Is This Mysterious Sunken Object Beneath The Baltic Sea? | The Mystery Beneath | Timeline
57:35
Timeline - World History Documentaries
Рет қаралды 3,5 МЛН
How did Michael Faraday invent? - with David Ricketts
56:33
The Royal Institution
Рет қаралды 384 М.
How NASA Reinvented The Wheel
25:34
Veritasium
Рет қаралды 13 МЛН
We built an AI directed laser that destroys moving targets...
22:27
Tech Ingredients
Рет қаралды 261 М.
We exposed BEEF to the vacuum of space, then ate it!
49:28
Tech Ingredients
Рет қаралды 340 М.
Как я сделал домашний кинотеатр
0:41
Airpods’un Gizli Özelliği mi var?
0:14
Safak Novruz
Рет қаралды 4,7 МЛН
Introducing GPT-4o
26:13
OpenAI
Рет қаралды 4 МЛН
Добавления ключа в домофон ДомРу
0:18