Making LED Resin Dice for D&D
Рет қаралды 1,290,542
2 жыл бұрынIs it possible to make light-up LED dice without batteries or charging?? Go to buyraycon.com/EvanAndKatelyn for 15% off your order. Brought to you by Raycon. Check out the tools we used below! 👇
🙏 Other sponsors:
TotalBoat: check out the epoxy we use: www.totalboat.com/evanandkatelyn (sponsored affiliate link) (search for high performance)
Glowforge: check out our Glowforge laser cutter here glowforge.com/evanandkatelyn # glowforgepartner
Use the link to get $500 off a Pro, $250 off a Plus, $125 off a Basic
Want behind-the-scenes content? Check out the Aftershow for:
• We show all the dice that didn’t make it to the final cut
• Our "disagreement" on the dice design
• What Evan broke and fixed… TWICE
• Last minute unfortunate discovery about the LEDs during the final dice
• Why we didn't make our own molds
• Why this project took an unusually long time
• What would we change if we were to go back and do it again
If you're a Patron already, watch it here: / wireless-led-67304494
If you’re a KZfaq Member, watch it here: • Wireless LED dice afte...
Not a Patron yet? Join here: / evanandkatelyn
Not a KZfaq Member? Join here: kzfaq.infojoin
TOOLS & MATERIALS (affiliate & *sponsor links)
TotalBoat Resin* www.totalboat.com/evanandkatelyn (search for high performance)
Glowforge* glowforge.com/evanandkatelyn
Mini Wireless LEDs amzn.to/3vJZ08h
Wireless LED coil bundle amzn.to/3N3prNF
Wireless LED coil (alternative source) www.adafruit.com/product/5141
Dice molds www.etsy.com/listing/11613727...
Tiny dice mold www.etsy.com/listing/77614552...
Alcohol ink amzn.to/3k1a4Ix
Pressure pot amzn.to/3K18XmF
Masks (sticker shock warning) amzn.to/3MkMBOC
Velvet amzn.to/3MolzpG
All our favorite resin supplies www.amazon.com/shop/evanandka...
🛒 Our favorite tools/materials on our Amazon page: amazon.com/shop/evanandkatelyn
🛠️ All our favorite tools: evanandkatelyn.com/tools/
Want more E&K videos? We have more channels:
🎮 Gaming: / evanandkatelyngaming
🎙️ Podcast: / evanandkatelynpodcast
🎮 Gaming Uncut: bit.ly/ekuncut
👫 E&K 2: / evanandkatelyn2
👫 E&K Uncut: / @evanandkatelynuncut
📺 Twitch live streams / evanandkatelyn
SOCIAL/SUPPORT LINKS
💵 Patrons can watch our Aftershow here / evanandkatelyn
👕 Merch shopevanandkatelyn.com/
📸 Instagram & 📣 Twitter: @evanandkatelyn
💬 Discord / discord
👽 Reddit / evanandkatelyn
🎥 FILMING GEAR (affiliate)
bit.ly/eandkfilminggear
🎼 MUSIC
Waltz of Treachery, The Descent, Mining by Moonlight, Matts Blues, Laconic Granny, Marty Gots a Plan, Last Kiss Goodnight, Kool Kats, Investigations, Hyperfun, Hustle, Hep Cats, Final Count, Exhilarate, Disappointment, Doh de oh, Darxieland, Constance, Carnival Intrigue, Aunt Tagonist, by Kevin MacLeod
@EvanAndKatelyn 2 жыл бұрын
🎲 Want to watch our first attempt at dice making? (they’re fluorescent!) kzfaq.info/get/bejne/a59kZ6uD1MrDpmw.html 😻 Want to get our new Joob plushie? www.makeship.com/products/joobie-plush ALL proceeds go to the Trevor Project! (on sale 3 weeks only)
@simona54140 2 жыл бұрын
Omg JOOB PLUSH IV BEEN FOLLOWING YOU FOR LIKE 4 YEARS (ME AND MY CUZ). BUT LOVEEEE YOUUUUUUUU😭😭❤️❤️❤️❤️❤️❤️
@katiea.5793 2 жыл бұрын
Hello! In the past I have tested the balance of some of my dice by dropping them into either water with salt dissolved into it, or water with a lot of sugar dissolved into it. Since these dice may not be perfectly balanced, it might be cool to test their balance on a stream or second video (or just post a quick video on social media)! Note that since these dice may be heavier, it could be difficult to dissolve enough of salt or sugar into the water to make them float. QQA! 😁
@wifipassword7383 2 жыл бұрын
Resin dice blindfolded
@EvanAndKatelyn 2 жыл бұрын
@@katiea.5793 We actually did try that but these were so heavy because of the LEDs they wouldn't float!
@morissaedwards7348 2 жыл бұрын
Ah, I remember being there for the neon dice. That was a fun video
@eh3010 2 жыл бұрын
I kinda feel that with the dice they've made we 1000% need a Evan and Katelyn D&D stream now
@kaykay7322 2 жыл бұрын
I would watch. maybe learn how to play along the way.
@kriki1906 2 жыл бұрын
Oh yes please
@steven12426 2 жыл бұрын
YEEEEES
@dominicw8868 2 жыл бұрын
@@kaykay7322 that’s what I was wondering, how are games of dnd played? Are they actually fun? Lol
@DJVoyagerXue 2 жыл бұрын
And don't forget the medieval towers and other builds they have made ;)
@laurenbrown9977 2 жыл бұрын
They're seriously stepping up on their sponsorship ad production. Someone give them Oscars.
@EvanAndKatelyn 2 жыл бұрын
one day we'll be formally recognized for our supreme acting skills in that one Raycon ad on that one dice video...
@Carlisios 2 жыл бұрын
Not the poscas
@ktbyrd 2 жыл бұрын
I was gonna say all of their sponsorships don’t interrupt the content and most of the time add to it!
@davidfagerburg6469 2 жыл бұрын
Made me laugh more than the Superbowl commercials this year
@LuckyCoinFrog 2 жыл бұрын
Probably the only channel I don't want to skip adds on because they are SO GOOD. lol
@changingmind3248 2 жыл бұрын
Just wanna point out that the box's border design is absolutely gorgeous
@georgeh5075 11 ай бұрын
Ofc... it's got joob on it
@user-ut3md1tm4e 8 ай бұрын
Just want to point out that I am a dog person
@TheDutchisGaming 2 жыл бұрын
The only thing I’m afraid of is that the LEDs might cause the dice to be weighted making the randomness more determined to a set of numbers.
@pmangano 2 жыл бұрын
The LEDs are probably not that heavier than the resin itself for the effect to be noticeable, in fact they might even be lighter (which would still be a problem)
@acat9707 2 жыл бұрын
@@pmangano I don't think they were referring to the total weight of the die but more so the weight distribution
@alliewilliams4050 2 жыл бұрын
Yeah that’s what I was thinking too. Lol Evan and Katelyn making loaded dice for DND. 😆
@maureenb2002 2 жыл бұрын
@@acat9707 if the leds are about the same as an equal volume of resin the weight distribution wouldn’t be off. If they are lighter it would be a problem.
@the.other.ian. 2 жыл бұрын
If the centering is off, the steel cubes would definitely affect the weight distribution
@Olliebunny 2 жыл бұрын
Now I need someone to do these “capacitors” with a nautical theme, blues, greens, and bronzes. To emulate that underwater mine theme and be steampunky, I think it’d be awesome for a dnd set
@OxalisOrSomethingIDK 2 жыл бұрын
that would be so cool omg i want
@YD_. 2 жыл бұрын
I want this
@aichitoshiki1321 2 жыл бұрын
Ooooo
@aspillust Жыл бұрын
a set like that would be really cool in one of the current campaigns i'm in, i'd go nuts over that lol
@Sparkies_Quest 2 жыл бұрын
Katelyn: “Unnecessarily steel cubes” Evan: “This is the way!”
@EvanAndKatelyn 2 жыл бұрын
Anything to justify that portable metal band saw -E
@nenef5551 Жыл бұрын
@@EvanAndKatelyn cool emoji!
@promotionsonline2836 Жыл бұрын
If there’s an award for commercials you guys need to get 100000% of all the awards! I’ve never been more excited to be sold on something!
@MrYaroph 2 жыл бұрын
I think you should have painted the "black" back of the LEDs with chrome paint, to make them less visible (because it would take on the color of the light)
@randomguyontheinternet5030 8 ай бұрын
OOO that would be cool.
@Lady_Hiccups 7 ай бұрын
I was just about to ask if they should try painting the leds to make them less visible.
@alfredfreedomjones5105 2 жыл бұрын
How far technology has come! Those little wireless glowing lights are almost magic🪄
@bow-tiedengineer4453 2 жыл бұрын
the crazy thing, is that that style of wireless power transmission is some of the oldest stuff in electronics, from way back when they still didn't know that electricity and magnitism were part of the same thing. It's such simple physics, but it's so cool and magical, and seems so futuristic.
@alfredfreedomjones5105 2 жыл бұрын
@@bow-tiedengineer4453 wow! Thanks for sharing ☺️
@vermili0n9 2 жыл бұрын
“Any sufficiently advanced technology is indistinguishable from magic” - Arthur C. Clarke
@bow-tiedengineer4453 2 жыл бұрын
@@alfredfreedomjones5105 your welcome. as an additional interesting thing, it's also the exact same thing as the transformers used in power poles to step down the voltage when going from the big long distance power lines to neighborhood lines, or from neighborhood lines to your house. It's basically just a transformer, except it's being used primarily for the wireless connection instead of for the voltage changing.
@foegettergames252 2 жыл бұрын
but what's the point of the die is unusable?
@Skaos87 2 жыл бұрын
As always I absolutely love it! Idea for a pt. 2 though: Have the LEDs shine outwards (might also look cool as is tho) BUT add some cotton wool around them. I've always loved the cloudy/stormy/fire effects that some achieve by combining these elements. Maybe use bigger die moulds as well?
@EvanAndKatelyn 2 жыл бұрын
That would be interesting to see!
@ashenwalls3558 2 жыл бұрын
Ooh this would be amazing, and maybe do a bigger d20 so they can fit more coolness inside!
@YasmeenKhan 2 жыл бұрын
ooh! I was thinking I want them to make the liquid core dice that you see, and combining those with these leds could be lovely too
@toparcticwolf 2 жыл бұрын
Also if they could find UV leds and combine that with the fluorescent dice
@reincarnatez2434 2 жыл бұрын
I think a much easier solution to get the LEDs aligned would be to just 3D print a jig of a mock d20 or whatever die you wanted, but with LED sized holes cut out in each face, with a small void in the middle. Then, you could just put a dab of hot glue on each LED, push it in, open up the jig, and you'd have a neat little ball you could put into your die mold!
@CreativityC0rner Жыл бұрын
That was what I thought they were going to do, lol. I wonder if there are even smaller LEDs. I’d love to see them do another set.
@doodlefawn4742 2 жыл бұрын
the little editing with Katelyn's hands going across the stars and them turning into a purple path was such a small editing detail but i love it.
@CeruleanSeal 2 жыл бұрын
This is without a doubt in my mind, the coolest dice set I've seen in my life. This wasn't even just a fun little maker project like so many other things you've created, this is innovation. You've created the future. Years from now LED dice & trays will become a norm and you empired it here on this d-... 6 week period. I want a set. I also want to see what other colors and combinations could be thought of.
@Refridgerating 2 жыл бұрын
Look up pixel dice, they had a Kickstarter last year and are in production development at the moment.
@maureenb2002 2 жыл бұрын
Pixel dice! That’s what you’re looking for. Production is delayed because of the chip shortage but they’re programmable and will show your roll on Roll 20 and D&D Beyond if you play virtual. My DM and I are trying to come up with a way to use them to use the random rolls my cats make when they steal my dice as part of our game once they finally get here.
@morgiiiklein5385 2 жыл бұрын
I just feel like if you’re not careful you could really easy weight the dice, like the old school cheaters used to in gambling lol
@Svenz0r 2 жыл бұрын
Having all but one of the LEDs pointing inwards and aiming the outwards facing one to the highest value of each dice would be neat.
@pixstatic200 2 жыл бұрын
this would be neat, though hard to pull off
@TheLynxer 2 жыл бұрын
This is legit a product. I'm sure you could refine and prototype more, but even as is I would 100% buy this for my own D&D uses. Well done E&K!
@MakeyJu 2 жыл бұрын
on one hand, I totally wanna play with these dice, they're SO cool on the other hand, no way in hell do they have an even weight distribution now, especially the d20
@erinpeterson3202 2 жыл бұрын
its actually incredibly difficult to make weighted dice, even when you are intentionally trying to weight them. for play purposes they are fine, i promise
@jlammetje Жыл бұрын
@@erinpeterson3202 can you explain how/why it’s difficult to make a loaded die?
@nicholaskerwin1538 Жыл бұрын
@@jlammetje you would have to place a larger amount of weight into an edge or corner for it to tip the dice. the most common way of making a weighted dice isnt actually weight but sanding an area to make it angled, this causes the dice to tip. due to their overall size and how the resin distributes weight internal changes arn't going to be a big factor as long as Evan sanded those edges well
@DreadKyller Жыл бұрын
@@jlammetje For the weight to have a really noticeable effect on the rolls the weight distribution needs to be pretty significant. Even if this is far off you're talking about a bias towards one side of the face less than a percent off. For competitions maybe, but for casual play, it's barely going to have an effect. As FiveSod said, you'd need to put a decent amount of additional weight fairly close to a face to drastically change the outcome. The LEDs and the acrylic cubes are likely quite close to the same weight as the resin, and are still fairly centered, so it's unlike it'll make much of a practical difference, especially for throwing from a low height where there's less time in the air.
@sadicalradness6927 2 жыл бұрын
I feel like y'all should try the "LED on every face of a mini dice" tec hnique with an oversized d20. They're the most fun to roll anyway
@EvanAndKatelyn 2 жыл бұрын
That would be fun! Already have a oversized d20 mold Only issue is that we already have too many dice ideas and too little time. Even though we're tempted to become a resin dice channel though, we also have so many non dice ideas we're super excited about. Ahh wish we just didn't have to sleep
@EvileDik 2 жыл бұрын
@@EvanAndKatelyn I did this as a Christmas present last year, I also wanted lights on every axis, but instead of using 6 transceiver sets, I added extra smd LEDs directly to one inductor, which takes up way less space. but obviously you need to be handy with a soldering iron, magnifying glass, and really thin enamelled wire.
@georgeh5075 11 ай бұрын
@@EvileDikenameled wire flashbacks... *Shivers*
@k.allen007 2 жыл бұрын
Okay but the way Evan looked at Katelyn when he said "you're smart" was so adorable I might have teared up. Y'all are incredibly adorable
@TheEliseRodgers 2 жыл бұрын
Relationship Goals
@crazycrafts3414 2 жыл бұрын
time stamp?
@vally_mally 2 жыл бұрын
@@crazycrafts3414 16:15
@theresadobbins1815 2 жыл бұрын
I LOVED the pink and blue... But I also really love the black tester! the black looked so much like a space themed die when lit up.
@randomguyontheinternet5030 8 ай бұрын
I love all the times evan says an idea, Katlyn says a different idea and even goes "aaand that's a much better idea. we're going with that". these two are so wholesome it's awesome. Even when Katlyn didnt think the embedded LEDs would work, she still let him try.
@Xavadings 2 жыл бұрын
These are so cool! I love the color combination. And I'm sure they add a whole level of mystery and magic to the DnD adventure! But mid-video I was thinking how dices would looked if you let the numbers clear and coat the rest of the surface black. The wouldn't look as cool and magical as E&K's do, but still interesting. So it anyone is a maker and likes this idea, tag me in your photos! ;)
@erlandjohansen7195 2 жыл бұрын
I've seen some people use shell molds, with clear center and black shell you'd get a result like that and I think it would look awesome!
@wirelesmike73 2 жыл бұрын
THIS!!! I'd like to E&K do this next. Hope they see this comment.
@JuriAmari 2 жыл бұрын
I could totally imagine this with a lava and basalt or mountain ice dice set. The glow of the magma & ice would look so cool. If you wanted to be extra, you could add some glow pigment to it so it would be lit whether on or off the platform. Also I think I remember why UV was not used… (cue flashback to keycap video)
@indyat.8450 2 жыл бұрын
This would be so cooll
@karlohorcicka7388 2 жыл бұрын
Upgrade idea: put UV leds and UV color as numbers so it lights up the numbers. Or IR leds but that'd be harder to film since camera sees IR wavelenght
@DominusFeles 2 жыл бұрын
+1
@IdaliaMay Жыл бұрын
Should have painted the back of the LEDs similar colors, pink and blue.
@redramage 2 жыл бұрын
an idea for having the LEDs facing outwards: 3d print the "tiny dice" core with the recessions modeled into it
@Sky-dy4vn 2 жыл бұрын
Big dice are a thing too
@ye11oman 2 жыл бұрын
I just wanted to share my appreciation of the fact that even as experienced makers, y'all aren't afraid of sharing, but there are still things that you find intimidating about projects and that is awesome ! Also even better than that you share your methods of overcoming which is always very important
@GardenHoseNapalm Жыл бұрын
It would be cool to have a set that randomly changes color, so when you role you could also have random affects thatd be unbiased
@nerdyluma 2 жыл бұрын
I really appreciate the journey you take us on with your workshoping and testing of different ideas that viewers might think of. The what ifs are shown and help inform us why they didn’t work providing a satisfying resolution
@xxkoumori 2 жыл бұрын
Came for the craft, stayed for the wholesome vibes. You guys have such a cute dynamic.
@HAppytobeHer 2 жыл бұрын
I’ve just found your channel and binged almost allllll your projects in a week 😳😁 love your dynamic
@penny-rose 2 жыл бұрын
Same
@EvanAndKatelyn 2 жыл бұрын
thank you!
@iieevaa 2 жыл бұрын
Same 😄
@thespankmyfrank 2 жыл бұрын
That's what happened to me a few months ago. Now I eagerly await every new episode. Watching them has genuinely given me so much light in my life haha, makes me believe there are so many good people like them out there.
@its_clean 2 жыл бұрын
Welcome to Kevin Nation :D Just wait until you get to the second channel, the uncuts, and the streams...prepare for wholesome chaos
@caramelbloom8341 8 ай бұрын
I just wanted to let you guys know, this video encouraged months of work and my passion for electrical enginerring. I truly appreciate how much you do just by showing people the stuff you make, ans hope you keep doing so for a long time. Thank you again.
@nenagravil 2 жыл бұрын
I genuinely and honestly hope with all my heart that the two of you are as happy together in regular life as you appear in your videos. You are such a joy to watch and I want the adorableness to be real!!!
@CyCyDark 2 жыл бұрын
The final set ended up looking so cool! Just circling back to your original insert attempt; when making dice with Mylar/cellophane, we typically recommend dipping the Mylar in the resin first before putting it into the mould. Putting it in as-is tends to introduce and trap a bunch more air bubbles than you would if the Mylar were already wet.
@johannamckibben8575 2 жыл бұрын
Yes! I agree. Most dice-makers I've seen have learned from trial and error to always coat whatever inserts they're using in resin before inserting them into the molds. It's messy but ensures that everything is evenly coated and reduces the bubbles SO much!
@SuperVoodude 2 жыл бұрын
Nice! I imagine this could also work in a dice tower. The back of the tower could house the coils and a clearish case would show glowing dice as they tumble down.
@JuelzLoren 2 жыл бұрын
Ive been watching you guys for years now and i adore how loving and accepting and complimentary you tow are to one another’s ideas, ambitions, and goals. It gives me a feeling unlike anything else seeing you work together to achieve a common goal. Trial & Error, Glitz & Glam, and Glow & Resin! 💖
@add_xtine775 2 жыл бұрын
lol, that raycon bit was the best lol. i cant tell you how many times ive been yanked back from getting hooked on a doorknob or something. i love the walnut base, really professional and specialized to yalls family
@danielmena6271 2 жыл бұрын
They look sooo good, ever since I saw those LED online I was waiting for someone to put them inside dice! So glad you guys had the idea
@jenniferbowles6080 2 жыл бұрын
You guys are awesome and inspirational. I’m a disabled veteran who lives in SA. I’m also an artist and a crafter and it would be awesome to meet you sometime at one of the craft fairs or cons that happen in the area. But lately I’ve been going through a lot of medical difficulties and watching your videos has really helped to keep my spirits up. Thank you!
@lemonscented1416 2 жыл бұрын
Thank you for your service ☺️
@chocolatecake722 10 ай бұрын
I used to use of them decompression tanks at work 30 years ago. I worked in a concrete lab, we used it to remove the air before we added a chemical that put air back in. Great video! Thankyou.
@Sasbatabata 2 жыл бұрын
I came back to this video because I totally called it. I was watching the new baking soda and super glue video, and I was again struck by how much the dice molds looked like Werpy Dice. The dice mold link isn't in the other video's description, but I came back to this one just to check. I'm so proud of myself for something so small.
@ricothewarlord3753 2 жыл бұрын
I found you guys during the pandemic shortly after Animal Crossing was released and I have enjoyed every second of each of your videos. I found great joy from your first attempt at dice as it was just a few months after I started making dice myself. You're both awesome and please keep up the amazing work.
@EvanAndKatelyn 2 жыл бұрын
Thank you so much!
@--asher-- 2 жыл бұрын
I don't know if you've seen this but they've done animal crossing to! It's in the gaming channel
@Qvintusmc 2 жыл бұрын
These may as well be semi-randomly weighted dice I'd imagine. Really cool regardless
@foegettergames252 2 жыл бұрын
@@samarnadra and that is why only posers use crafted resin dice
@gailgregory2425 2 жыл бұрын
No? They CAN be weighted, but say it's clear resin, no add ins, and you can tell theres no bubbles, why is it a problem? Theres also ways to tell, the salt water test, rolling and finding if theres an average whatever. They're fine for homebrew or less professional games.
@studiozealot 2 жыл бұрын
Oh my gosh Katelyn I FEEL you with the word "opacity"!! I've said it wrong my whole life (since I saw it first in Photoshop at a young age and never heard it aloud), and it's perfectly reasonable to want to say it the with a long "a" sound, but recently I learned the actual linguistic reason it's said the way it is. The principle is called "Tri-Syllabic Laxing," where a word's pronunciation differs from its root when there are three or more syllables (that's an oversimplification, but my knowledge is pretty superficial). The easiest way to understand it is with extant words that use tri-syllabic laxing: "Wild" and "Wilderness" | "Divine" and "Divinity" | "Opaque" and "Opacity" I hope this gives you the confidence it gave me! I couldn't stand changing my pronunciation without knowing the reason why, and I still slip up all the time, but I honestly encourage and admire the effort to correct yourself and get unstuck from old habits. It's a quality life skill. That being said: English is jank, linguistics is fluid, and it's good to be kind to yourself and others about how we navigate language
@EvanAndKatelyn 2 жыл бұрын
Honestly this makes me feel better and I learned something today, thank you!
@FUBARguy107 2 жыл бұрын
I made my own leather dice tray... adding a copper coil along the bottom and covering it with another layer to hide it wouldn't be too bad at all! You guys are adorable! You can paint the numbers with fingernail polish and wait about 5 seconds and wipe it and the numbers remain filled. (oh wait you did it lol) Last edit to my comment; I have Raycon Work Earbuds. I love them so much. The right ear bud controls normal, noise cancel or awareness mode and the left changes the tuning like classic or rock. A double tap on either pauses the sound/video and three taps changes the song ahead or back depending on left or right. The case recharges them between uses and the case recharges on the same cable as my phone. I highly recommend the brand.
@cream476 2 жыл бұрын
These look so cool! Turning the lights inward was a really good choice. If you guys ever feel like going through all the hassle with these things again I think they'd make an awesome chess set too!
@MissRadi0active 2 жыл бұрын
I would love to see them make a chess set. I think they would make each piece unique and make Jubie the queen. 😂
@kieransween1678 2 жыл бұрын
I want to see them make a resin chess set now!
@sofiatgarcia3970 2 жыл бұрын
I'm pleased to see you guys use the proper safety equipment. We love you and want you safe while you (we) have fun.
@KevinBein Жыл бұрын
These are so incredibly cool! I am not even really into tabletop gaming that much an I can't get over how perfect these are. My brother is big into D&D and this would probably blow his mind.
@amanda_duh 2 жыл бұрын
the editing just keeps getting cooler! props to katelyn and editor if they did this video !!
@saschaschwarz92 2 жыл бұрын
I love that you don't show just the "right" way on how to do it, but the whole learning process And the Dice look absolutly amazing
@braynechoblue 2 жыл бұрын
This makes me want to put an Arduino controlling the power source in the box to make the dice flash. It would be cool to have it light up differently when a 20 is rolled. Perhaps machine vision to detect the face that is up but maybe there are other ways of sensing the orientation of the dice. The box makes a nice platform for exploring other functionality.
@MobTheGlitch 2 жыл бұрын
I had a similar idea for my arduino class I had last year.
@charleneeaster6886 2 жыл бұрын
Loved the project. You two are so extra in the way you test everything, then more ideas come and inevitably more testing. Also can I just say the ad for Raycon was epic.
@noneyabidness9644 Жыл бұрын
This is the best project I've ever seen on any channel.
@enveleptionstudios8711 2 жыл бұрын
I've been playing DnD with some really close friends for quite a while now.. And a very old friend if mine who is also part of the group just cant find his perfect dice. We've literally looked everywhere. He describes them as wooden dice but with metallic edges. I'm aware that this is just a single comment in a big pool of ideas but I'd love to see his dream come true Also: Thank you for your awesome Videos troughout the years. It's been a pleasure to which your creative journey. May it never end
@junerose7868 2 жыл бұрын
Maybe get wooden dice and add metallic edges? i dont know how to do that though
@noesunyoutuber7680 2 жыл бұрын
@@junerose7868 The two options I can think of would be metallic paint/ink (probably silver) on the edges of a wooden die, which is easy mode, or building a thin metal frame and carving the edges out of a wooden die (creating an L-shaped notch where each edge was) and attaching it, which is very much hard mode.
@Atherax 2 жыл бұрын
Metal inlays in wooden dice, I've made a pair that where like that, tiny metal numbers and all, i mostly buggered it up, it turned out okay but not amazing, but it proved that with more skill it is possible and really cool in theory
@swimseven77 2 жыл бұрын
That's a very interesting concept. I wonder if solder would be a good choice for the metal edges, or if it would be too soft and deform
@enveleptionstudios8711 2 жыл бұрын
@@swimseven77 It could actually work though I'd fear the dice then not being weighted properly anymore due to the lack of control you have in terms of quantity of the soldering lead..
@SeriousBeard 2 жыл бұрын
Katelyn yelling opakity with the on screen edit hit me just right man and had me dying. I love the project, the edit, and both of you guys. Thanks for another banger!
@baxterwilhelm8114 2 жыл бұрын
I bought a pair of Raycons I think like two years ago on E and K’s rec. I loved them SO much. I used every single day. I just upgraded cause why the hell not and they’re EVEN BETTER NOW. I am personally notspon but y’all RAYCONS.
@4tm504 2 жыл бұрын
Best ad yet, I'm living for the drama! also love the glowing dice!
@Strav24 2 жыл бұрын
The gliwing center plus the dark spots from the coils really make it looks like cloudy galaxies
@SilverMoonling 2 жыл бұрын
The entire time watching this I was thinking of the book series The Stormlight Archives where their form of currency are tiny glowing gemstones incased in glass marbles. If there was a way to make them glow for a time you could make a bunch of prop spheres! d= This was fun to watch! The dice turned out really cool.
@seeing8spots 2 жыл бұрын
Such a cool idea!
@shoofy1181 2 жыл бұрын
I'm working on making some now, so far they are really cool! Dream come true, I finally have some spheres!
@99Technetium 2 жыл бұрын
I was watching your adhesive velvet application, and I have a tip for you. I work at a sign shop; and to align decals that are cut-to-fit we tape down one edge, hinge it, remove backing and then squeegee down slowly from the hinged side. But good rule-of-thumb is have overhang whenever possible.
@redknights2007 2 жыл бұрын
I saw these led's a few years ago on the Strange Parts youtube channel. He saw that model and Gundam makers were using them to take the figures to the next level. It's cool that your finally using them. 😎
@stephdagie7086 2 жыл бұрын
Love the montage of the tray being assembled 😻😻😻 Also love the side panel design. Sooo cute
@00dmb5 2 жыл бұрын
🤣😂 I'm dying, "I kissed your moustache right off", you two are adorable, thank you for making my week
@saxmanseldon Жыл бұрын
I NEED to make a set of these for my collection!! These are so amazing! Also, I love the playful banter between you two. Thanks for sharing!
@bethb8148 2 жыл бұрын
I saw this video *right* before we left for camping and had to wait *ALL WEEKEND* to be able to watch it! 😂 As a dicemaker & a huge fan of you guys, I was so stoked for it!!! I really hope you guys make more dice 👀
@alliescott7233 2 жыл бұрын
I love the details you guys put into your videos! Like the “Kaitlyn will remember that”
@nsullivan9096 2 жыл бұрын
I reccomend finding bigger dice molds, or 3d printing your own Oversized Dice to give you more space when you want to add electronics to dice! it is a bit easier to work with and you quite literally will have more wiggle room.
@galghoul3042 4 ай бұрын
I would buy a set of these in less than a heartbeat. Absolutely gorgeous, absolutely magical, absolutely a must-have! Well done, Evan and Katelyn!
@CrochetLover85 4 ай бұрын
this channel is so comforting ❤ thank you ❤
@jay_lastnamehere 2 жыл бұрын
Oh my god I CANNOT WAIT for y'all to play D&D someday I can't miss that. Love the project and how the dice turned out, and the tray was super cute!
@jamescarter9911 2 жыл бұрын
I absolutely love how u guys make something so simple like a dice into an entire documentary with testing, emotions and success I love it😄💙 your shots were amazing, especially at the end with the mist or smoke and u guys nailed this vid❤️
@LuminaryXion Жыл бұрын
the black was my favorite! it looks spacey!
@yesthisisme8466 Жыл бұрын
I am here for their Positive energy. Just listening to them makes me happy :) the projects are nice too.
@davidrichardson4445 2 жыл бұрын
You know it’s going to be a good video when you’re not even 4mins in and we’ve already done a Science Adjacent and a Resin Time!!
@kdjslvgds 2 жыл бұрын
honestly, i really love all the testing stages we went through! its always super neat to follow through with you as you try and fail and try again. (not that they were necessarily fails)
@GoodLife-nn7yn 2 жыл бұрын
This is THE coolest thing I've ever seen! I need these in my life.
@mikab.4838 2 жыл бұрын
I can feel the tired and frustrating hours that went into this 😩 so worth it, this set of dice is so cool AAAHHH I want it!!
@LemonPlatypus377 2 жыл бұрын
As a TTRPG player and a longtime viewer, the dice videos are some of my favorites. I LOVE this set and can’t wait to see you experiment with velvet dice! (We all know it’s coming, how could you not? Lol.)
@Floralcrafts 2 жыл бұрын
As someone who has been making dice for over a year, this makes me so happy. Good job y’all!!
@PetersTreasury 2 жыл бұрын
I LOVE this project so much! The dice tray is gorgeous!
@Wolvianna 2 жыл бұрын
I love watching your content, it's so entertaining with the skits and the way you guys are so unapologetically yourselves
@musicthroughthenight 2 жыл бұрын
Oh my god those dice look amAZING!!!! I now desperately need a set… they’re SO magical!!!
@ryanl1414 2 жыл бұрын
You should make a chess set with these and the coil underneath the chess board.
@smylyface 2 жыл бұрын
Am I the only one who looks forward to all of their sponsor spots? I swear, they are the only KZfaqrs who I never FF over their sponsorships because they make them part of the fun. I have even made purchases using their codes. E & K, you guys are awesome!
@jordanyeager395 28 күн бұрын
Sticker tip: peel off a small part of the backing and fold it over, line up small exposed sticky to the edge and slowly pull of the rest of the backing as you lay it down
@kdjslvgds 2 жыл бұрын
also the production on this video is just excellent. i always love katelyn's editing but this one is a step above. a+ 10/10!
@bow-tiedengineer4453 2 жыл бұрын
I want to do this! I'd probably make a few dozen dice, spin test them for fairness, and then keep the best ones with the rest as just decoration.
@waldmann7777 2 жыл бұрын
The end result looks so cool, like a galaxy dice that actually glows AMAZING!
@kaylalea1148 2 жыл бұрын
Y’all have done something so cool here. I feel like u could absolutely sell these if u wanted to. I could imagine some dnd content creators dying to have a dice set like this. U guys are incredible
@martinplaysbg7289 2 жыл бұрын
Taking glow in the dark dice to the next level!
@DreadPirateElla 2 жыл бұрын
As a D&D lover this makes me so happy, i want these dice so bad bro 😭 Do y'all play D&D?? If so, would y'all ever do like a D&D stream, maybe a one shot or something? I'd love to see y'all play!! Seems like it'd be a blast
@amyholdsworth4890 2 жыл бұрын
I have seen when people use the film inside dice moulds - they put resin in the mould but also pre-dip the film to coat that to minimise voids
@BabyShenanigans 2 жыл бұрын
I bought some Raycon earbuds with your code a couple months ago and I love them! Zero complaints. I even dropped them in the dog's water bowl and they still work fine. lol
@williamblankenship8209 2 жыл бұрын
I am probably going to now make my own dice! My girlfriend has started watching y’all because of me and she loves it. I love your content for the building and the personality you both have and is so wholesome and fun. She loves you guys now so I’m slowing getting her into building stuff with me because I have always loved to build. Hopefully we are gonna become the college age E&K at home. A DIY version of E&K if you will. A DIY version of the king and queen of DIYers. 😂
@EvanAndKatelyn 2 жыл бұрын
Thank you! Hope y'all have fun making things together!
@williamblankenship8209 2 жыл бұрын
@@EvanAndKatelyn I’m completely fan boying right now. THANK YOU SO MUCH!!!! We will 😊
@jordanhordyk6679 2 жыл бұрын
I love these dice! I would buy them if I had the money and they were selling. There's only one thing anyone can say is missing: a percentile dice (which you don't technically need but it would bring the set to 110% completion)
@edgarsketches 2 жыл бұрын
Your sponsors are so lucky. They are one of the rare ads I _watch through_
@brett8090 2 жыл бұрын
This is so good. I can't wait to see what I can do with this information. You two are great as is your work. Much appreciated.
@allietaylor4991 2 жыл бұрын
That was by FAR and away my favorite ad spot to ever exist. Raycon, I'm coming for you! Also, just amazing video, I just LOVE how you guys work through your creations and show us the underbelly of projects. It's the best part! you guys are killin' it!
@PhoenixRevival00 2 жыл бұрын
I'm curious how the finished ones actually fair in a float test. I have a feeling these are all rather loaded.
@alexchu6318 2 жыл бұрын
Y'all are so much fun to watch and honestly have the right level of chaos for DnD. If you decide to play I'd love to hear stories or even if you join a group that airs their games on Twitch could be cool! Love the dice, I think I need a set lol
МИЛАНА ТУТ 👀
Рет қаралды 7 МЛН
Evan and Katelyn Uncut
Рет қаралды 240 М.
Sara Animal eating
Рет қаралды 26 МЛН
Kirill Multitool
Рет қаралды 61 МЛН