Making Magnetic Drill

Рет қаралды 4,655,017

4 жыл бұрын

This is the second magnetic drill I've built. In this project, I used three magnetic door lock to build electromagnet. Each magnetic door lock has a maximum pull of 180kg, giving o total of 540kg. I used a laptop power supply, I also tried to connect the magnetic door lock to a 12v 3A power supply, but on this power supply to heat up. The electromagnet is really strong, strong to drill in any position without worrying about the drill falling.
In this project i also decided to build another feed mechanism, which is much more stable and no backlash.

Пікірлер: 1 200

@jmac430 4 жыл бұрын

This is officially my new, favorite, DIY Mag Drill build on KZfaq!! Seriously though, I'm in the process of building my own so needless to say I've been watching countless Mag drill builds and have even made Playlists, etc. To help me formulate a combo of the best builds into my own design... so what I'm saying is that I've pretty much seen every mag drill (built from scratch) on KZfaq and I think yours takes the cake for me... awesome job, very creative and a beautiful build design that I think will last much longer than many of the other MOT electromagnet drill builds I've seen out there... Keep up the great content! Cheers! - Jesse

@WorkshopFromScratch 4 жыл бұрын

Thank you :) I am very happy that the movie was enjoyed, I tried very hard to show the whole construction process exactly so that the person who undertakes the construction had an easier job :)

@johnhili8664 4 жыл бұрын

@Global Eco Tec - Ritter ohne Furcht und Tadel And most probably cheaper:-))

@xysix2548 4 жыл бұрын

@@johnhili8664 No. They are not inexpensive at all.

@jmac430 4 жыл бұрын

Not to mention the learning experience you get from an in-depth, tight tolerance kinda build, that's priceless... if you can build it and you have the time, I say build every time

@trabadix 2 жыл бұрын

@@johnhili8664 hahaha yeah, sure little boy

@JobinPThomas 4 жыл бұрын

Oh my god this is what youtubers need to learn Not even a single step is skipped . building it from scratch excellent.add a spring too. Excellent editing amd camera

@WorkshopFromScratch 4 жыл бұрын

Thank you :) I just forgot to add a spring: D

@Michmanjuga 3 жыл бұрын

@@WorkshopFromScratch You also would want to add a revolution control.

@oddjobbob8742 3 жыл бұрын

In the previous YT he uses a lawn mower pull to incorporate a spring return in the “quill.” And that one has a speed control on the motor. But this is by far the more perfect build.

@tumbystyle4844 3 жыл бұрын

Hello my friend

@josephgiustiniani2834 Жыл бұрын

Great project. I appreciate the fact that there is no super crazy music playing. You also disassembled the components several times to insure proper fitting. This is left out in most videos. It is an important step. I build a lot of "gotta have it now" tools" when we are in a bind for a repair. It takes time to take apart, check, measure, reassemble. But the end result, as you have done here, is a project that ends up being done right the first time. I also buy broken/useable tools. They provide needed parts for projects, saving time and money. Your modifications to the drill plastic housing, I thought was brilliant. It simply works. Thanks for sharing your experience with us.

@jimmy_jamesjams_a_lot4171 2 жыл бұрын

I love it how you tack Weld your stacked up parts, temporarily so that they’ll stay all lined up while drilling, then just tap them with the hammer to seperate them again. Just that one method alone makes your holes line up quite dependably!! THANKS for sharing!!

@zoobarev 3 жыл бұрын

🔥🔥🔥. Я, если честно, весь ролик думал, что магнитным будет столик перед дрелью, типа примагнитил деталь, и тиски не нужны..... Но даже предложить не мог такой финал. Исполнение на высоте.

@alelois 4 жыл бұрын

Es realmente hermoso, se combina todo el saber de una persona. La reutilización de materiales y la capacidad de ingenio de una persona. Muchas gracias por compartir tu conocimiento! 💪💪🔨🔧🔩✌

@luismarlonmaciasvelasquez9940 4 жыл бұрын

Y más q todo el costo no gasto ni la tercera parte d lo q cuesta un taladro magnético

@bradxvIII 3 жыл бұрын

i'am always amazed of the polish craftsman !!! the legends says they can eat steel !!! Dziękuję za udostępnienie ! wielbiciel Twojej pracy!

@WorkshopFromScratch 3 жыл бұрын

😂😂Thank you 😁 Pozdrawiam

@kjeldschouten-lebbing6260 4 жыл бұрын

Love the simplicity in your work! Lots of youtubers with CNC-everything and the most expensive tools. You often simply use good'ol tools like a square and a centrepunch instead. Clean, Simply. KISS.

@WorkshopFromScratch 4 жыл бұрын

Thanks 😁

@davidurdahl6656 4 жыл бұрын

Dont be a tech hater.

@mrdavidurquhart 2 жыл бұрын

i just love this. The only improvement I can think of would be to either fix the drill RPMs at a lower speed or make the drill speed variable with an off the shelf circuit with a digital RPM display.

@balloney2175 2 жыл бұрын

RPMs are not necessary unless you are in a hurry b/c you need to pee ASAP.

@user-gi1zs1uu1y Жыл бұрын

😃

@user-gi1zs1uu1y Жыл бұрын

😃

@lylebester2232 Жыл бұрын

Low RPMS perfect for drop VRN 400 to 600, yes that can work perfectly actually what I'm after, except it's all too expensive to buy here in South Africa

@iggysixx Жыл бұрын

From what I understand, this is powered by 19V, rectified (laptop charger) So it could easily be outfitted with a ready made PWM board. (Btw. Excuse me if I somehow missed that part, but.. Unless the rotor was rewound for the lower voltage, I'd say this would run the drill quite underpowered, compared to mains voltage.. Right?)

@kabaniumus 3 жыл бұрын

Great, just super! I would also add table-mount eyelets for versatility. I think that it would not have complicated the design very much, but it would also allow the use of this drill on non-magnetic surfaces.

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@adrianakuzmikova1697 2 жыл бұрын

@@WorkshopFromScratch what cooling liquid do you use while cutting and drilling?

@general5104 Жыл бұрын

I like your movement. I've considered building one, in the past, but have never had the time. I like the way you designed it. One thing I'll pass on to you, when you put your wiring into a rubber lead protector boot, position the wires so there's enough loop inside and then put a Tyrap around the wire, inside the casing. This acts as a strain relief, to keep the outside wire from tugging on the connections. They require a little loop of wire to prevent breakage. If they are tight, there's no room for them to "grow & shrink" under load. (Trust me, they do. When you pull down on your handles and really put a bind on that motor, you hear it straining...those wires are heating up and will come unplugged if they've too short.) VERY NICE ! Thanks for the build and excellent videoing & posting!

@adrianozafret6498 3 жыл бұрын

Parabéns você é o melhor!!! Ja vi vários vídeos na Internet os seus são os melhores !

@noyacat7269 4 жыл бұрын

Hi, to build it from zero that's was a great job. Really you're the best.👍

@WorkshopFromScratch 4 жыл бұрын

Thank you :)

@userinshelter 4 жыл бұрын

Не устаю повторять, Вы настоящий молодец! Магнитная дрель стоит как говорящий слон. Лайк однозначно. Люди! Учитесь и не ленитесь))

@alexeylitvinov5006 4 жыл бұрын

Перевел дрель, три отвёртки, три электромагнита, кучу металла и времени. А мог пойти и купить. Чему учиться? Как нерационально использовать ресурсы?

@user-mb6bn6rt6w 3 жыл бұрын

Чему учиться? как сверлить тупым сверлом?

@tolyanzavyalov9655 2 жыл бұрын

@@alexeylitvinov5006 Такой станок нихуя не дешево стоит!!!!

@ct2264 3 жыл бұрын

I love it! And I could noticed your vise is magnetic as well.

@hypersmudge1 3 жыл бұрын

Simply magnificent design and workmanship! Really great being able to watch you work on this project. Thanks for posting!

@WorkshopFromScratch 3 жыл бұрын

Thank you :)

@valterleao6795 3 жыл бұрын

Meu Amigo..., como não dar um like no vídeo...., só se a pessoa não ver o seu empenho e dedicação, você é MUITO HABILIDOSO, parabéns mesmo!!! Obrigado por compartilhar comigo seus conhecimentos. Abraço aqui do Brasil

@WorkshopFromScratch 3 жыл бұрын

Obrigado :)

@kareongames 4 жыл бұрын

thats freaking smart if you need straight holes fast on a really big piece that u cant bring to the drill press, just, take the drill press with you and magnetically mount it to the thing u are drilling, genius

@WorkshopFromScratch 4 жыл бұрын

Thank you :)

@xConundrumx 4 жыл бұрын

If you need one and don't have the tools to make one bankruptcy auctions are a good place. Save them from getting sold for scrap en you can get some sweet high end tools for cheap.

@jmac430 4 жыл бұрын

@@xConundrumx where are these bankruptcy auctions and how do you find out more info on them, etc...? I'm intrigued lol 🤔

@xConundrumx 4 жыл бұрын

@@jmac430 Well where I live (Europe) we have them online. There is actually a couple of them and are somewhat popular (judging from the bidding which is also online). They do tack on a percentage for themselves but even so you can get quite lucky with them too. A fair few of my most used tools come from there. Beats Ebay in many cases for us due to import taxes and transport costs. How to find them, depends on where you are I guess. I just found them through the typical search engines. As a matter of fact just checked and sure enough I find 4 of these magnetic drills on the list today. They are quite popular though.

@PBMS123 4 жыл бұрын

He didn't think of this. Mag drills have been a thing you can commercially purchase now for years. They're expensive though, and this is a fantastic video

@GRomanini1717 2 жыл бұрын

You are a motive of inspiration showing to everyone how the things can be made from ideas and planning. Greetings from Brazil

@allenmckinney9533 3 жыл бұрын

Nice build. Gives me the idea of converting my old table top drill press into a mag drill.

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@aznative_ 4 жыл бұрын

You seriously outdid yourself. That looks like a Workhorse.

@WorkshopFromScratch 4 жыл бұрын

Thank 😁

@MCsCreations 4 жыл бұрын

Pretty fantastic job, dude! Really nicely done!!! 😃 Stay safe there with your family! 🖖😊

@WorkshopFromScratch 4 жыл бұрын

Thank you :)

@QWireArt 2 жыл бұрын

I can clearly say i have better tools than you... But your talent and creativity is a thousand miles ahead of me... 👍🏻👍🏻

@GeneralF34R 3 жыл бұрын

Love the bottle Jack bench vise!

@lukaszzielinski8314 4 жыл бұрын

Super projekt😀 kawał dobrej roboty. Czekam na kolejne twoje projekty.

@WorkshopFromScratch 4 жыл бұрын

Dziękuje :)

@lukaszzielinski8314 4 жыл бұрын

@@WorkshopFromScratch A gdzie dostałeś takie elektromagnesy ? Są dostępne w sklepach? Bo kiedyś szukałem i nie mogłem dostać

@WorkshopFromScratch 4 жыл бұрын

Nazywa się ten elektromagnes "zwora drzwi" jest tego pełno na allegro, w sklepach też nawet w budowlanych marketach, ale w sklepach cena zwala z nóg więc pozostaje allegro lub aliexpress :)

@lukaszzielinski8314 4 жыл бұрын

@@WorkshopFromScratch wielkie dzięki za info. Widzę że wszystko jest tylko trzeba wiedzieć jak szukać😀

@vidaumdobrasil 2 жыл бұрын

Watching here from Brazil! This work is sensational, it is to be congratulated and it certainly inspired my project to assemble mine. Strong hug from a Brazilian!

@carlosbusato1758 4 жыл бұрын

La Verdad... Un Genio el Tipoo!

@devidsousa2053 3 жыл бұрын

Boa noite serralheiro! É show seus equipamentos. Ajuda muito em sua versatilidade parabéns.

@anesiocamillo9298 3 жыл бұрын

Genialidade, criatividade, praticidade, parabéns.

@ronwhittaker6317 3 жыл бұрын

big box is cost prohibited and we should br building and not buying it the quest / cost of independence

@nvlvdave 4 жыл бұрын

Nice job on a really handy tool. I bought an Evolution Mag Drill and use it frequently. If you can get a 3/4" Weldon "chuck" for it, you'll be able to use annular cutters, a worthwhile upgrade.

@montwolfman 3 жыл бұрын

good idea but i wonder if the drill rpm's are too fast

@tobygilbert5566 3 жыл бұрын

@@montwolfman I wonder why he didn’t use a dial make the speed variable just like when it had a variable speed trigger

@bulletproofpepper2 4 жыл бұрын

This maybe the best ever weld only build. My hats off to you master builder! Super useful thanks for sharing.

@WorkshopFromScratch 4 жыл бұрын

Thank you 😁

@andrepetrovich592 3 жыл бұрын

Супер!!!!!!

@oddjobbob8742 3 жыл бұрын

Your builds are really nothing short of amazing. Part way through a Unitek ad for their mag drills popped up. I had a good laugh. Why would I when I am watching an excellent YT about building one for myself? Oh, and I live that orange color you use!

@LifesAbe-ach 2 жыл бұрын

Jesus how stupid are you . Time plus parts and tooling required to build one when they're cheap enough to buy . Working at my current charge rate for engineering and fabrication work I could spend £600 on a new bought unit and still be under build cost .

@oddjobbob8742 2 жыл бұрын

@@LifesAbe-ach you should consider reading the book, “Anger Kills!” Not sure of the author’s name. Good luck with your hypertension.

@bukipuki6206 3 жыл бұрын

Для Этого Человека нет ничего невозможного 👍👍👍

@tumbystyle4844 3 жыл бұрын

@vfdzzz 4 жыл бұрын

Мужик знатно заморочился, но работа достойная! Молодец.

@edwardiannarelli4678 2 жыл бұрын

SA-WEET! I used to use these long ago in the steel yard/fab shop. Super cool tool! Always wanted one. Maybe the time is now. Thanks for showing how to do it.

@WRFUSINAGENS 3 жыл бұрын

Parabéns pelo trabalho, ficou muito bom.

@KEOHO1965 3 жыл бұрын

Wow... with your skills, we really don’t need those big box tool retailers.

@user-km9eb9ty4e 4 жыл бұрын

Клёво! Отличная работа!!! 👍

@kentuckytrapper780 4 жыл бұрын

I'll take two, great job.

@NapierNimbus 3 жыл бұрын

Fascinating seeing the fabrication, what a neat idea. Seen those electromagnets used on secure door entry, they really are powerful.

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@douro20 4 жыл бұрын

Eibenstock is still in business. They make a Morse-taper hand drill built to an insane level of precision- it's actually precise enough that I've seen it used as an attachment in a vertical turret lathe.

@marcfournier823 3 жыл бұрын

Awesome build.

@easyworkshop2066 4 жыл бұрын

Dobra robota !!! Tak trzymaj :)

@WorkshopFromScratch 4 жыл бұрын

Dziękuje :)

@nirmalbalchandani4626 Жыл бұрын

Hamey hand med magnetik masin kee jarurat hai iskee jankari aoor rate bataye

@SilverShadow2LWB 3 жыл бұрын

Great video. I didn't realize how much I need something like this. What I don't understand is how you can design and construct such a beautiful drill, but can't make anything to open your tool bench drawers (17:57). They should glide as easy as your drill. Looking forward to more.

@sarkasaa 3 жыл бұрын

Damn, you werent joking when you decided on a channel name, you earned a sub

@tumbystyle4844 3 жыл бұрын

Very good

@user-ih4gj3qy4j 3 жыл бұрын

Отлично сделал!!! Супер!!!

@tumbystyle4844 3 жыл бұрын

Very good

@jeovacarvalho3936 4 жыл бұрын

Nossa que legal você é incrível parabéns pelo seu excelente trabalho e criatividade quero ver mais suas criatividades 👍👏🇧🇷

@Brian18741 4 жыл бұрын

Brilliant work again man! I really look forward to your videos now! 👌👍

@WorkshopFromScratch 4 жыл бұрын

Thank you :)

@user-im8vn1sp9q 4 жыл бұрын

Красава! Добавь ещё регулятор скорости оборотов дрели. И будет вообще супер.

@user-ob5rw5jv2y 3 жыл бұрын

И реверс и можно будет резьбу нарезать.

@user-nh8ez5nn9m 2 жыл бұрын

Да , станок сделал отличный!!!, позволю себе заметить, крепеж стойки под дрель я бы сдвинул как можно ближе к краю, возможности под большие коронки было бы больше.

@AlexanderEresov 4 жыл бұрын

Next version: in-built cutting fluid dispenser :)

@franciscoharootiam5603 7 ай бұрын

La fabricación de una excelente erramienta para el taller exelente trabajo maestro gracias por compartir bendiciones ☺️

@isaiasbernardo3333 3 жыл бұрын

Parabéns ,a todos tirar o chapéu , excelente.

@RedDogForge 4 жыл бұрын

Lol! LOVE the "stock cam"

@user-zl4vp7xs9h 3 жыл бұрын

Класс

@user-ok1vb8ox7q 3 жыл бұрын

@@user-zl4vp7xs9h с

@jesusurunuelavilloslada6280 3 жыл бұрын

7uu

@franciscowashington2155 4 жыл бұрын

Muito bom 👍👍👍👍😎

@WorkshopFromScratch 4 жыл бұрын

Obrigado :)

@tumbystyle4844 3 жыл бұрын

Very good

@cahkezels9750 3 жыл бұрын

I fell in love with your works, subscribed!

@MrRevell13 4 жыл бұрын

This is fantastic! Great work!

@WorkshopFromScratch 4 жыл бұрын

Thank you 😁

@adriannavarrofonseca7179 3 жыл бұрын

You are AMAZING... I definetively HOOKED UP by your channel... for me it is a dream to have my own tools but my budget... well, I think your ideas could help to achieve something important... THANKS!

@WorkshopFromScratch 3 жыл бұрын

Thank you :) Most of the tools I use have been made by myself, so I recommend that you build it too :)

@tumbystyle4844 3 жыл бұрын

@luizferreira9978 4 жыл бұрын

Ótimo trabalho 🇧🇷👍

@behemothinferno 3 жыл бұрын

Loving the Fein look!

@RANDALLOLOGY 3 жыл бұрын

That was an Awesome build. Like the idea of using mag locks used for door locks. 👍👍

@WorkshopFromScratch 3 жыл бұрын

Thank you :)

@gorillaau 3 жыл бұрын

Yes, that's a brilliant idea. They are made to hold a load.

@ai5085 4 жыл бұрын

Really useful stuff! 👍🏻

@WorkshopFromScratch 4 жыл бұрын

Thanks :)

@mariovilchez8450 4 жыл бұрын

@@WorkshopFromScratch www4e

@jlace22 3 жыл бұрын

Hey mate love your builds. Any chance you can list the bits you bought for your builds in the video descriptions? Thanks from Australia

@cwindigo6919 3 жыл бұрын

OBO HANDS Fail-Safe Electric Magnetic Lock 180KG 350lbs ~$25 U.S.

@cwindigo6919 3 жыл бұрын

M1 T25 pinion gear and rail

@cwindigo6919 3 жыл бұрын

McMasterCarr has 2485N232 and 2664N543 for rack and pinion. Close enough I guess.

@israeldias2834 3 жыл бұрын

Parabéns projeto espetacular 👏 top das galáxias,sem mais comentários o amigo vende este suporte?

@Average.George 2 жыл бұрын

You’re a mad scientist, and I love it. 🤘🏼

@user-wu7nb2oy9x 4 жыл бұрын

SUPER !!!👍

@tumbystyle4844 3 жыл бұрын

@uwepfitzner9682 4 жыл бұрын

A Drilling Maschine from GDR😂😂😂 thats realy NICE💪👏👏

@mayinramon5036 4 жыл бұрын

@jakobv8 3 жыл бұрын

Amazing build! You are my new favourite. Keep up the good work.

@nicolaquintavalle2476 3 жыл бұрын

Wow, beautiful job thank you for sharing! 😃

@StakrCZ 3 жыл бұрын

dzięki za inspirację :-)

@WorkshopFromScratch 3 жыл бұрын

Nie ma za co 😁

@valveman12 3 жыл бұрын

Wow... great work on the mag drill. What was the stuff in the can you used to fill cracks and holes in the plastic?

@pierre4658 Жыл бұрын

I think it's putty

@pelesmaan75 3 жыл бұрын

Love that magnetic drill.

@paulone-off7286 3 жыл бұрын

Now that's impressive, nice work.

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@MechanicVoronov1988 4 жыл бұрын

Отлично 🤝👍👍👍👍

@user-dg1gs6lb6y 4 жыл бұрын

Еще бы регулировку оборотов, а так, труда конечно много вложено, молодец, Мастер.

@user-oq6ow5su6l 4 жыл бұрын

Она и так низко оборотная!

@user-jn9nz4bv7w 3 жыл бұрын

@@user-oq6ow5su6l да куда там низко оборотная,

@silva1tube 4 жыл бұрын

Level extreme. Fantastic project!

@WorkshopFromScratch 4 жыл бұрын

Thank you 😁

@rt9372 4 жыл бұрын

Love it!! Great work!!

@WorkshopFromScratch 4 жыл бұрын

Thank you :)

@TheKeKApex 3 жыл бұрын

A pivot between the magnet and the actual drill mechanism might make for some interesting work

@WolferAlpha 4 жыл бұрын

18:13 I saw this in a bank robbery movie

@sidgar1 4 жыл бұрын

Cracking into a safe, yes I knew if seen that too

@devsendustri6138 3 жыл бұрын

Thats what i'm looking for in the commets :D

@465kuba 3 жыл бұрын

the dark knight :)

@andrzej3511 3 жыл бұрын

This only confirms the usefulness of such a drill.

@born_to_be_wild_ Жыл бұрын

Nice job, man! I have put it to my todo wishlist for garage.

@waltermurillo7834 3 жыл бұрын

Sos un genio brother te felicito

@user-cz5gy2cz2u 4 жыл бұрын

Ну все можно сейфы вскрывать.😀😂

@WorkshopFromScratch 4 жыл бұрын

😁😁

@vfdzzz 4 жыл бұрын

Главное удлинитель по длиннее не забыть)

@cyklop_1435 4 жыл бұрын

Bardzo pomysłowe i kreatywne, strach pomyśleć jakie szalone pomysły realizowałbyś z jakąś wielką frezarką 😄

@WorkshopFromScratch 4 жыл бұрын

Dziękuję :) Napewno przydała by się frezarka, ale bez niej też da się dużo zrobić :)

@anlag2 11 ай бұрын

Drilling machine, grinder, welding equipment, band saw, etc. - truly homemade.

@steveb936 2 жыл бұрын

Fantastic build, well done

@boltonky 3 жыл бұрын

When the sound of drilling puts you to sleep and you wake up and the video is over lol

@WorkshopFromScratch 3 жыл бұрын

😂

@CraigHollabaugh 3 жыл бұрын

Funny I feel asleep for 10 mins to awake to your comment. You're so right!

@garyhuston 4 жыл бұрын

What do you think would be an ideal power supply? I am thinking of doing a project using the same lock magnets. I have a 12volt 10 amp supply.

@WorkshopFromScratch 4 жыл бұрын

My Electromagnets are one of the cheapest I've found, and they are very sensitive to the no right current, each of the electromagnets has a consumption of 12v 350mA, when I connected them to a 12v 3A power supply, the electromagnet were heating up, it has several power supplies, and only after connecting the 19v 1.5 A power supply, electromagnets have stopped heating but it is still too big power supply and they are warm but not hot. I don't know how better quality electromagnets perform, maybe they wouldn't get hot with such a power supply

@garyhuston 4 жыл бұрын

Workshop From Scratch thanks for the reply

@WorkshopFromScratch 4 жыл бұрын

If you undertake construction and you have something unknown to you, write a comment with a question and I will try to help you

@garyhuston 4 жыл бұрын

Workshop From Scratch thanks

@user-cc6xy3jm3e 4 жыл бұрын

kzfaq.info/get/bejne/qJ97mplqyLfYlZs.html I can't promise anything but something like this might not overheat.

@franciscohernandez4766 3 жыл бұрын

Mis respetos tiene muy buenas ideas de trabajo, le mandamos un cordial saludo.

@ME-qq2dc 3 жыл бұрын

Mate.......Awesome job!

@syedsaadali2945 3 жыл бұрын

Best metal shop worker I have ever seen in KZfaq with some excellent skills and machines 💯💪

@WorkshopFromScratch 3 жыл бұрын

Thank you :)

@anands6127 3 жыл бұрын

A extremely useful project

@GNU_Linux_for_good Жыл бұрын

This mag drill can easily be taken on a space station as well. Holy mackerel.

@OscarRodriguez-mj7vk 2 жыл бұрын

Perfect!. What a work of art! Congratulations

@antoniomurziani7909 3 жыл бұрын

E' un piacere vederti lavorare; fai veramente delle opere d'arte, bravissimo.

@spideybrent 3 жыл бұрын

Hello from Yorkton, Saskatchewan, Canada. Thanks for sharing your great video’s please keep them coming.

@thomasjandl4134 3 жыл бұрын

That's awesome, every second of your video is a pleasure to watch.

@WorkshopFromScratch 3 жыл бұрын

Thank you :)

@petermeijer3019 2 жыл бұрын

Wow, super !!! You are a real pro!!! I also like the way you are using "used" materials.

@fabiogs68 Жыл бұрын

Grande idéia!! Muito bom poder fabricar uma furadeira tão útil e que no comércio está super caro.

@pjhalchemy 2 жыл бұрын

Outstanding build and fab work! Surprised you used a threaded bolt instead of a shoulder/shank bolt on the pinion but the bearings were great. Thanks for the tip on the mag door locks, a bit pricey but handy...definitely enough holding power for any position. Really nice work on the drill end cap! Only thing missing, imho is a chuck key holder and a drip oiler. ;-P Love it, and thank you for showing us with your formidable fab skills!!