Making PCB Motor v4

Рет қаралды 560,120

Күн бұрын

These are all the new improvements with PCB Motor version 4!
Get a free trial of Altium Designer - carlbugeja.com/altium
PCB Manufacturer - www.pcbway.com
Help me make more projects by supporting me on Patreon - / carlbugeja
My Electronic Kits - flexar.io
This project is Open-Source and licensed with Creative Commons Attribution Share Alike 4.0 International License
Open Source Files - github.com/CarlBugeja/PCB-Mot...
Time Makers:
00:00 - Intro
00:36 - PCB Design
01:39 - Unboxing
02:03 - Initial Testing
03:13 - Iron Rotor
05:24 - Shaft Mount
06:02 - Torque Testing
07:01 - Speed Testing
07:30 - Thermal Testing
08:24 - Onboard ESC
09:35 - Conclusion
Cameras/Tools I use (affiliate links):
Main Camera - amzn.to/30tRgY7
Second Camera - amzn.to/2ZLm2wy
Light Setup - amzn.to/3jtqckA
Heating Plate - amzn.to/36qYzD4
Ultrasonic Cleaner - amzn.to/3nfUGHY
Magnifying Lamp - amzn.to/3jrcaQv
Vernier Caliper - amzn.to/3eTju3I
Multi-meter - amzn.to/3hq6B2R
Digital Milligram Scale - amzn.to/30HIw1X
Digital Microscope - amzn.to/3hyzoFt
3D Printer - shop.prusa3d.com/#a_aid=0550494M
LCR Meter - cutt.ly/Wlmg0b0
Social Media:
KZfaq Channel - / carlbugeja
Instagram - / bugeja.carl
Twitter - / bugejacarl
Facebook - / bugeja.carl
Linkedin - / carl-bugeja-0b922a135
Website - carlbugeja.com
Music:
Sun Machine One - Loopop (KZfaq Audio library)
DC Love Go-Go - Silent Partner (KZfaq Audio library)
Brontosaurus - Topher Mohr and Alex Elena (KZfaq Audio library)
Here We Go Again - Silent Partner (KZfaq Audio library)
#electronics #motor

Пікірлер: 489

@oliverer3 2 жыл бұрын

Your tenacity is commendable, the amount of iterations you've gone through on all these PCB coil projects is simply staggering to me, I usually give up after revision 3.

@timteecvhn 2 жыл бұрын

If theres a will, theres a way. And Carl has clearly shown that he has the will to make a PCB motor that works pretty well.

@sksoundgtr8 2 жыл бұрын

Make one mini fan cooler

@b-beluga4510 2 жыл бұрын

@@timteecvhn it can give speed but no torque.. because of the coil limitations in that pcb..But it can be used in many places...but if you put a heavy proppler on it, the rpm will go down

@pratiklondhe5167 2 жыл бұрын

@@b-beluga4510 maybe we can use some gears to increase torque

@R.Daneel 2 жыл бұрын

@@pratiklondhe5167 A harmonic drive, maybe?

@robertf1720 2 жыл бұрын

Lots of good advice in the comments: hitting permanent magnets reduces their strength, use coolant when machining iron, a simple hand vice to put in the bearings would help prevent damaging the outer race,

@daiaki1975 2 жыл бұрын

True

@NIOC630 2 жыл бұрын

Also the way he mounted the magnets in the steel part is shorting them, it would be better to have a magnetic plate as a flux carrier and sandwich the four holes on top made from pcb material so N-S of the magnets is not connected via magnetically conductive material.

@THE_PeglegSwantoon 2 жыл бұрын

@ Carl Bugeja & Robert F You are conflating Iron and Steel, you should use coolant with STEEL, Iron is self lubricating because of its high carbon content which acts like graphite during the cutting process. In machine Iron, be prepared for a tremendous mess, the carbon dust will coat everything in a certain distance

@aplacetoimproveteslacoilin3721 Жыл бұрын

One of the great things about online forums is that you can get a lot of good advice from people who have been there, done that. Recently, someone asked how to make a PCB motor and got a lot of great responses. Some people suggested using permanent magnets, but others warned that hitting them with a machining bit reduces their strength. It's a good idea to use coolant when machining iron because it helps to keep the heat down and prevents the workpiece from warping.

@BH4x0r Жыл бұрын

also a good esc that keeps the motor pressing rather than jump around and hit the scale like that, not a diy arduino based one..

@deathmock5 2 жыл бұрын

adding small air vanes to the side of your stater to encourage air movement though the PCB with holes in it might help control the thermals. A lot of high power motors use this design.

@ashleyarundel3134 2 жыл бұрын

Good call!

@aplacetoimproveteslacoilin3721 Жыл бұрын

To encourage air movement through the PCB with holes, small air vanes can be added to the sides of your stater. This will create a more efficient system by increasing the amount of air that is able to flow through the PCB. Additionally, this will also help cool the motor by drawing in cooler air from outside the enclosure.

@izzieb 2 жыл бұрын

I like that you labelled the signal and ground and still got them mixed up. Seems like something I'd do tbh.

@alexsharp940 2 жыл бұрын

For calculating torque, you should instead make an inertial dynamometer. Basically a fly wheel that you attach to and spin up with the motor and monitor RPM, based on it's angular acceleration and the fly wheel's known polar moment of inertia, you can build a torque vs. speed curve that's much more accurate. Ideally this should be done using 2 fly wheels of different mass so that you can calibrate out the rotor's inertia, but if the rotor's inertia is much less than the flywheel or the accuracy needed is low, then this can be done with only 1

@tdeb007 2 жыл бұрын

Great option, I was thinking the same thing! Was kinda flabbergasted that he said "the second method was less accurate", since the first method also takes in the acceleration by the gravitational forces. Basically the same thing as hitting one of those carnival attractions, the one where you strike with a hammer trying to make a bell go "Dingggg" (don't know the name) ;p.

@MoreCharactersThanNeeded 2 жыл бұрын

Cool, is this method described further somewhere? Is it called something?

@prestonburton8504 5 ай бұрын

this is good - can't change the physics behind this simple test - very good!

@aam50 2 жыл бұрын

Although I have absolutely no need for a PCB motor myself, it’s great to see your thinking process and seeing a solution evolve. Brilliant!

@CarlBugeja 2 жыл бұрын

Thank you very much!

@lilblackduc7312 Жыл бұрын

@@CarlBugeja ...Hammering bearings shouldn't be done. Try gently pressing them...Good job!!! 🇺🇸 😎👍☕

@MartinBogomolni 2 жыл бұрын

On your OtherMill -- you should use mist coolant and run at the right feed/speed with an HSS bit!

@phoebed5333 2 жыл бұрын

I think carbide will still do better with cast iron over HSS - HSS wants a lower SFM thus lower RPM during cutting or it tends to burn up. The Othermill doesn't spin slower than 10k- whereas I'd want to be cutting at less than half that RPM for a .125" endmill on a regular milling machine. Coolant could definitely help with the issue of burn up - spraying a bit of WD40 or a cutting lubricant can also work in a pinch.

@Gorger12 2 жыл бұрын

I have worked a little with a company that is makes PCB motors commercially. The primary engineering challenge is heat removal, the method you are using is pretty much the way to do it. The next step is to add an aluminum housing as a much larger heatsink. The rotor is typically on both sides on the PCB. Two bearings further apart assists in removing wobble of the rotor. The next engineering challenge is that you get a very low copper to rotor ratio. One way to get around this is making a motor with a very large outer diameter, the other is to sandwich multiple together. By having a stack, you can utilize the same rotor magnet on both sides on a sandwiched PCB. From a power/efficiency compared to weight, these motors are not competitive with traditional wound motors, however I see a future for low cost designs where size and weight is not as critical. Using an extruded heatsink ring that mounts to the end would allow the assembly to easily scale up or down my increasing length with common componentry sandwiched together.

@elpocasombra9237 2 жыл бұрын

You could make a little fan with that motor, they would be pretty useful in motherboards or small places that require coolig, great ideia m8

@scottwilliams895 2 жыл бұрын

This is a really cool project! I was excited to see another video in this series. Keep making progress

@EricDalgetty 2 жыл бұрын

I think a "shoulder bolt" might do what you need for holding the bearing better

@carlangelo653 2 жыл бұрын

+1 for shoulder bolts, saved me from a lot of headaches when making some of my RC projects.

@bigiron4018 2 жыл бұрын

yep. and you cant always get the right shoulder length, but you can get one too long and tap it further without much trouble.

@spankeyfish 2 жыл бұрын

Or just a part threaded bolt, it'll be too long but you can just cut the excess threaded portion off.

@bigiron4018 2 жыл бұрын

@@spankeyfish yeah that’s the go to when the shoulder length is right. And the proper solution being AN or MIS bolts

@johnywhy4679 2 жыл бұрын

This rocks. Thorough explanation of your steps, great troubleshooting, friendly vibes, very cool engineering!

@UnrelatedAntonym 2 жыл бұрын

I'm loving all these mechanical PCB designs. Keep up the good work.

@Clark-Mills 2 жыл бұрын

I've heard that hitting magnets isn't the best idea; this may be for old-school magnets so possibly worthy of further investigation. Maybe a vice or some other parallel compression method might improve things possibly?

@jameslmorehead 2 жыл бұрын

No, still goes for exotic magnets. You reduce their strength. Those definitely need to be pressed in. The same with the bearing, but for different reasons. Ball bearings are designed to take a radial load, not an axial load. Hitting it in can deflect the cage and cause the rolling drag to increase.

@dontnubblemebro 2 жыл бұрын

Half tonne or tonne arbour presses aren't expensive, have plenty of feel and are designed for the job

@franktkalcevic5342 2 жыл бұрын

KNIPEX PLIERS WRENCH makes a great hand held arbour press. especially for small parts like those.

@ralvarezb78 2 жыл бұрын

True.

@aplacetoimproveteslacoilin3721 Жыл бұрын

Magnets have been around for centuries and are still popular today. However, magnets may not be the best idea for making PCBs or motors. Magnets can be very strong and can easily damage or pull apart delicate parts. In addition, they can be difficult to remove if they are accidentally attached to a component. Magnets should only be used if there is no other way to hold a component in place.

@AdityaPrakash-kt3rf 2 жыл бұрын

Love your approach for testing. Excited for the next 2-wheel drive robot video!

@chrissmit7549 2 жыл бұрын

Hi Carl. If you extend the idea of decreasing magnetic reluctance from your iron rotor to the stator you could stick a tile of high frequency ferrite material to the opposite side of the stator. I reckon you should get significantly more torque that way. But since you then also increase PCB coil inductance you most likely will decrease the motor Kv value so you will the need a higher supply voltage to maintain max rpm. Looking forward to your next improved motor!

@yoshimikoyama2922 2 жыл бұрын

a bit worried about whether the iron backplate has short-circuited some magnetic flux or not, because the magnets are sunk totally inside the backplate. maybe the holes should be shallower.

@clitisswood7330 2 жыл бұрын

Right !

@Electronicshobbyy 2 жыл бұрын

As always high quality content ❤️👌

@s.b.kmakes409 2 жыл бұрын

Finally something amazing on KZfaq

@kingmasterlord 2 жыл бұрын

I'm a very big fan of this project, you have my rapt attention, please continue

@gegegege6902 2 жыл бұрын

very nice, can't wait for pcb robot v2 Thank you for sharing your nice work & ideas

@dm5rkt 2 жыл бұрын

Great work! Good idea to use printed fixtures. About the bearing: When journalling a shaft using deep groove radial ball bearings, you need to use two of them, not just one (unless it is a cross roller bearing, which is not available in such small sizes). In your case you could get away with stacking one on top of the other. This would get rid of that wobble and should improve performance as fluctuations in the air gap distance would be reduced. Also, it is best to press the magnets in; a convenient way is to use a small pillar drill.

@projects4996 2 жыл бұрын

Superb 👌. Hats off for you patience while creating these projects

@HimanshuGhadigaonkar 2 жыл бұрын

Your effort is appreciable..

@ukpoetry Жыл бұрын

Amazing work.

@wmhilton-old 2 жыл бұрын

This is so cool 😎 One of my favorite projects!

@mytechnotalent 2 жыл бұрын

LOVE the way you design PCB's brilliant artist you are Carl!

@beehphy 2 жыл бұрын

Cool project. Kicad is the software that you want.

@voxelfusion9894 2 жыл бұрын

For real. KiCAD is free, open source *and* cross platform. Meanwhile Altium is none of those, and costs 3,500€ *per year*. That's 15 Adobe licenses. Totally absurd. They must be running a good racket on whatever businesses pay for this.

@ralvarezb78 2 жыл бұрын

At this moment, KICAD lacks on some features comparing to Altium, but the kicad developers make great improvements on each version. I have already used it in some professional projects. More than 10 years ago Eagle was a promising tool, you had a Free Software version (even available in Ubuntu 2008 packages). But since about 2017, they changed their strategy, they were bought by Autodesk, and from version 4.7 to 9, they have not improved anything at all. They have only made an ANNUAL PAYMENT LICENSE with very annoying authentication system by smarthphone and time limited code. And continues without proper hierarchical design. KiCAD instead has improved remarkably from version 3 to 5, has hierarchical design, trace length matching (this works very well, so this brings you the possibility to digital high speed design), and python scripting. If Kicad continues to improve, we will soon have a tool capable of competing directly with Altium.

@maxhouseman3129 2 жыл бұрын

@@ralvarezb78 eagle is now integrated into Autodesk Fusion360

@ralvarezb78 2 жыл бұрын

@@maxhouseman3129 yes, I know

@ralvarezb78 2 жыл бұрын

@@maxhouseman3129 I have one fusion360 license at work

@pratiklondhe5167 2 жыл бұрын

nice improvements man !

@horaciomateos6583 2 жыл бұрын

Your projects are amazing! I was curious about why it was so long since last video…. Now I see! Congrats!

@SiliconSoup 2 жыл бұрын

Amazing innovation and engineering skills.

@Jonas_Meyer 2 жыл бұрын

I will order my next project definitely from pcbway. Looks like a real cool sponsor and they do way more interesting pcb.

@noicthebrave 2 жыл бұрын

One of the most underrated youtubers. Love your content. Keep up the amazing work. :)

@kikihobbyrepair 2 жыл бұрын

Cool little project

@Omar_Cubing 2 жыл бұрын

Your videos are amazing 😍 Keep going

@CrazeUK 2 жыл бұрын

Brilliant video. I love the determination. If you get the rotor recut, maybe look at making some curved channels on the back to act as a small low flow fan over the pcb.

@braulioisaac2609 2 жыл бұрын

Excelente trabajo Carl.

@rockpadstudios Жыл бұрын

I was thinking about if this was possible - great job

@petermines3575 2 жыл бұрын

Awesome always great to improve

@SantokuMaster 2 жыл бұрын

Great work! You can place thinner magnets (in hard plastic discs) on both sides of pcb for more efficiency.

@HOTSHOT-ls1bc 2 жыл бұрын

This is exactly what I’ve been looking for FOR YEARS

@SpectrumDIY 2 жыл бұрын

That is awesome O_O Really well done, cheers for sharing!

@dbyrd7827 2 жыл бұрын

This is genius in action! Thanks for sharing!

@shyleshsrinivasan5092 2 жыл бұрын

Inspiring ! Thanks a lot for your videos !

@AgainPsychoX 2 жыл бұрын

PCBWay doing great job sponsoring this video!

@theeds 2 жыл бұрын

Great work. For the shaft/bearing setup, it is recommended to use a pair of ball bearings for supporting the shaft and the shaft could be a shoulder screw instead of a normal fully threaded screw. These changes should minimize the wobble you are seeing.

@MyTubeSVp 2 жыл бұрын

You really deserve these sponsors !

@ehvway 2 жыл бұрын

Great engineering / trial and error 😎

@JasonTRogers 2 жыл бұрын

This was cool to watch

@AdamButler-gv2gv Жыл бұрын

lovely stuff

@DIYwithBatteries 2 жыл бұрын

It looks pretty cool Dude 👍

@bharathpavitra1 Жыл бұрын

You really did hardwork brother 👏

@michaelrichey8516 2 жыл бұрын

A few more successes like this and you might be able to incorporate this design into a PCB quad-copter!

@ekulda Жыл бұрын

You guys are really good and smart. Im very impressed. Keep going. Success to you.

@papagatorackspanner 2 жыл бұрын

This is great! Keep up the good work.

@yakine13 2 жыл бұрын

I just discovered your channel, and you're amazing

@madness6804 2 жыл бұрын

pcb drone? possible idea

@CameronKalegi 2 жыл бұрын

Would be fragile, but awesome. 🤞

@brandonmack111 2 жыл бұрын

I mean, I have a small quadcopter that's basically a PCB with 4 motors on it. The main difference here would just be that the motors would be built in to the PCB itself.

@3deeguy 2 жыл бұрын

Absolutely amazing.

@Kabab 2 жыл бұрын

This is absolutely awesome. I bet if you glued small ingots behind the PCB at the center of each coil you'll increase the torque significantly. If you can get thin slivers of iron in 0.1-0.3mm thicknesses and you sandwich the slivers with some spray paint as the dielectric you'll cut out a lot of the Eddy currents.

@hansturpyn5455 2 жыл бұрын

subscribed, this is really interesting for micro sized drone motors

@timohyland 11 ай бұрын

I had no idea a pcb axial motor was possible! This is great!

@HolmesHobbies 2 жыл бұрын

Very nice new version! If you ever need some dynamic balancing of rotors, I've got the machine.

@MAGATRON-DESTROY 2 ай бұрын

Mill vanes in the iron rotor that move air to cool the stator and rotor

@shahidiqbal5749 2 жыл бұрын

very very impressive research.

@MakarovFox 2 жыл бұрын

nice man, so cool

@CaptZenPetabyte 2 жыл бұрын

Well done sir, and thanks for the video. :)

@guatagel2454 2 жыл бұрын

Dude... wow... Thank you!

@djquestionthis 2 жыл бұрын

So dope!!!!!! Cheers!!!!

@tomkuhn 2 жыл бұрын

Nice work sir! Keep this motor idea in mind. The number 1 killer of all motors is heat. When ever you can, find the best way dissipate heat. Air flow will provide the cooling for sure. Your current changes will change the temp. Also as you found. Hint - Standard AC motors use their rotor (on an ODP motor) as the fan for air flow. Using both rotor and stator design, in harmony, you can create the optimum airflow you may need.

@killabeesrobotics 2 жыл бұрын

This is so awesome. You need to make the pcb press fit for a bearing and you need the magnet housing press fit for a shaft. Bonus points if you add a second pcb board that mounts to the first with another press fit bearing and mounting holes so you can mate this to a planetary (or other) gear box. That will allow this to easily drive your 2wd robot while getting more consistant readings/results. If this comes across as rude or intrusive I appologize.

@Exupgenesis Жыл бұрын

awesome idea and niiiiiiiice work *both thumbs up*

@AJBtheSuede 2 жыл бұрын

The "real" temperature test is quite hard to do in a home lab.... Ideally you want to measure the motor structure heat - per watt of mechanical energy delivered. For steady state RPM's this is only really doable if you have a reference motor bench with constant load RPM and a torque meter on the coupling shaft. Good work, really interesting to see :)

@aplacetoimproveteslacoilin3721 Жыл бұрын

There are many new improvements with PCB Motor. For starters, the unboxing experience is much better. The initial testing yielded good results, and the iron rotor provides significantly more torque. Additionally, the shaft mount makes it much easier to install and use. Finally, the torque testing showed that this motor is extremely powerful. Overall, these new features make PCB Motor a much better product.

@maxhouseman3129 2 жыл бұрын

You could add a small 3d printed fin structure to the PCB-facing side of the rotor which acts as a small ventilator for cooling the PCB actively.

@aeebeecee3737 Жыл бұрын

this is amazing

@user-tx1zp3dh8f Жыл бұрын

One word incredible

@waseemh3863 2 жыл бұрын

Definitely subscribing, very cool video.

@fatgamer919fan4 2 жыл бұрын

Finally a upload after 2 months

@williammorris1763 Жыл бұрын

Need transformer steel laminate. Also use cnc to make a fixture plate that mounts into the base plate. Cool stuff!🙂

@johndododoe1411 Жыл бұрын

Yep, sandwiched steel plates is the traditional way to avoid eddy currents in motors . A very traditional brushless design is to have a rotor made of stacked plates separated by oxidation, dipped in conductive aluminium to form shorted rotor windings that make the rotor respond to the 3 phase rotating magnetic field from the stator. Thus there are no permanent magnets and the rotor is formed from stacked plates cut/stamped into a designed shape, clamped and dipped.

@Bianchi77 2 жыл бұрын

Cool video, thanks :)

@PestOnYT 2 жыл бұрын

Well done. Great idea. Maybe your high temperature issue can be improved by some design changes of the moving part to shape it more like a fan in order to push air to the pcb to cool it.

@ChadKovac 2 жыл бұрын

Imagine a quad where it's arms are the ESC and motors and they all connect into a central flight controller...

@MurcuryEntertainment 2 жыл бұрын

A quad where the whole thing can be made from a single etched PCB and some 3D printed props? Talk about driving the cost through the floor.

@gautamkrishna7421 2 жыл бұрын

🤯🤯🤯

@jyvben1520 2 жыл бұрын

@@MurcuryEntertainment using a flexible pcb ...

@maxhouseman3129 2 жыл бұрын

A quad copter made completely out of one single PCB exists already.

@ChadKovac 2 жыл бұрын

@@maxhouseman3129 I was thinking a central brain that you could plug these arms into. Interchange them... Maybe even plug in other things.. sensors, wheels, whatever.. could be a terrific teaching tool.

@jeffhaskin895 2 жыл бұрын

You are the real deal my guy.

@joe7272 2 жыл бұрын

This is a very important invention. combined with 3d printers and PCB milling machines you can create A LOT!

@maeanderdev 2 жыл бұрын

I think you could further increase the torque by building a rotor with magnets on either side of the PCB. Besides the additional flux from the added magnets such a arrangement is likely decreasing flux leakage by a lot

@anjecha9496 2 жыл бұрын

Great video! Perhaps with thinner magnets you could layer the pcbs to get more torque!

@suelynch 2 жыл бұрын

Those motors would be a great upgrade for people who have models of the TOS Enterprise. The could use them for the rotating bussard lighting on the front of the nacelles. The motors which are being used at the moment are very loud. The rotating engine lights of the TOS Jupiter 2 also pops to mind. I am sure there are other model kits which use conventional motors for lighting effects. It's something to think about.

@soxxz2028 2 жыл бұрын

for iron milling, you could make a support with the aluminum to hold it!

@andremicallef804 2 жыл бұрын

very interesting carl i very much enjoyed the content! :)

@Mtaalas 2 жыл бұрын

You need magnetic chuck for such devours. Or you need to have custom designed work holding, soft jaw vice.

@SimpleNature 2 жыл бұрын

Carl, love the build and dedication. I have stumbled across this video and chewed on it for a day - have you considered an N+1 approach to the magnet/coil ratio? I suspect this will help torque. Would it be a different driver?

@mandoukhnine8548 2 жыл бұрын

Dude, you dope, this is creative as .....

@SS-gn3jn 2 жыл бұрын

Super! Keep up the good work 😁👍🏼 From : India!

@rickotap3859 Жыл бұрын

awesome project! I think there could be another reason, why temps improve with higher speeds: the faster magnets move over the coils, the more they themselfs will actually induce a voltage, opposing the driving voltage. that will result in lower currents, and is usually the reason why typical electric motors have the highest torque at start up (higher current- stronger magnetic field - more torque). you could easily test that by measuring the amps drawn at different speeds.

@OceanPictures 2 жыл бұрын

Your project is incredible. Very cool stuff. Have you tested Duty cycle effects?

@schulzcbs 2 жыл бұрын

Awesome as always! I wonder if its worth replacing the screw and ball bearing with a bronze bearing and some parts created on a lathe - more space for magnets and less wobbling? :)