Making Polymer Clay Jelwery with Wires | DIY Turquoise Ring Bracelet & Earrings

Making Polymer Clay Jelwery with Wires | DIY Turquoise Ring Bracelet & Earrings | Studio Vlog 3

Рет қаралды 33,542

Күн бұрын

Hi guys! Here's a video of making turquoise jewelry with polymer clay and wires. It's a vlog and tutorials combo. Hope you enjoy this DIY ring, bracelet, and earrings-making session with me. :)
You might like to check out these tutorials:
3 minimalist earring hooks tutorial: • 3 Earring Hooks Tutori...
Paper clip chain bracelet: • Minimalist Paper Clip ...
Alright, let’s get started!
Timestamps:
0:00 Making turquoise beads with polymer clay
4:01 Making turquoise earrings with wire
6:09 Making turquoise ring
9:07 Making turquoise bracelet
#jewelry #tutorial #diy #turquoise #polymerclay
****************************************************************************
Materials I used:
1. 16g raw brass wire- Find similar here: amzn.to/39t4Ov3
2. 18g raw brass wire- Find similar here: amzn.to/3MnAdOl
3. 20g raw brass wire- Find similar here: amzn.to/3NBdYEX
4. White acrylic paint- Find similar here: amzn.to/3tsqUoX
5. Gold leaf sheet- Find similar here: amzn.to/3NLpzS7
6. Clear translucent liquid sculpey:-Find it here: amzn.to/3mDinvi
7. Cernit translucent white- Find it here: amzn.to/3tuYQRP
8. Cernit translucent turquoise (currently not available)
9. Brass earring posts- Find similar here: amzn.to/39jAlA5
(You could use copper, aluminum, or silver wires if you like, you could also use artistic wire for practice purposes, don't recommend it for wearing though. )
Tools I used:
1. Side cutter/Flush cutter - Find similar here: amzn.to/3MoVG9E
2. Flat nose pliers- Find similar here: amzn.to/3yU52X9
3. Round nose pliers- Find similar here: amzn.to/3MiJ044
4. Chain nose pliers - Find similar here: amzn.to/3MfTHo7
5. Mandrel Pliers- Find similar here: amzn.to/39kr9eo
5. Bent nose pliers- Find similar here: amzn.to/3l8fzpv
6. Mandrel pliers- Find similar here: amzn.to/39kr9eo
7. Metal Block- Find similar here: amzn.to/3lik8gJ
8. Chasing Hammer- Find similar here: amzn.to/39noHUD
9. Nylon Hammer- Find similar here: amzn.to/3PfLkuq
10. Ring Mandrel - Find similar here: amzn.to/3wpketx
11. Flex Shaft- Find similar here: amzn.to/39qcdvh
12. Sandpapers 400 & 800g - Find similar here: amzn.to/3sEaUiY
13. White silicone polishing wheel- Find similar here: amzn.to/3wCt1Zk
14. 1mm drill bit- Find similar here: amzn.to/39jhm8M
15. 1.5mm drill bit- Find similar here: amzn.to/39jhm8M
16. Wooden Bracelet mandrel- Find similar here: amzn.to/3HaOOdY
17. Clay cutting blade- Find similar here: amzn.to/3zw4NBQ
18. Acrylic roller- Find similar here: amzn.to/3xjqrGv
#earrings #bracelet #ring #jewelry #diyjewelry #turquoisejewelry #turquoiserings #turquoiserings #bracelet
****************************************************************************
Please like, subscribe, and turn on notifications if you like to see more jewelry-making videos from my channel. I'll be doing my best to upload a new video every week.
If there are jewelry pieces you would like me to show you how to make, let me know in the comment below.
Thanks for watching! Stay well and safe. :)
Special credit:
Music by mj apanay - tokyo - thmatc.co/?l=0A73EB5E
Music by mj apanay - 11:23 - thmatc.co/?l=E6FABEFA
Music by Yung Wacho - That's That (feat. Tony Rashad) - thmatc.co/?l=FDD197C0
Sign up thematic via this link if you like:
app.hellothematic.com/?via=ma...

Пікірлер: 81

@MaggieCSAtelier 2 жыл бұрын

Hi guys, I hope you like this vlog-style tutorial and find it inspiring :) I've always been wanting to make turquoise jewelry and I was waiting for a modern idea to happen. Then here it is, in June, which is summer for most of us. I've also tried many times making those turquoise beads, and they finally look so amazing! (at least to me. :D) Have fun making these summer jewelry. :)

@kirandk9413 2 жыл бұрын

Amazing vlog with summer vibe jewelry..👍🏻😍

@MaggieCSAtelier 2 жыл бұрын

@@kirandk9413 Thank you Kiran ! I hope your a chance to make some of them ☺️🧡

@egyptianprincess6006 Жыл бұрын

Yes u are the greatest 😊 plus my birthday 🥳 is in June the month of wedding 🎉🎉🎉 👰🤵👰🏽‍♂️🤵‍♀️🤵🏽 & my fav color turquoise 🎨

@MaggieCSAtelier Жыл бұрын

@@egyptianprincess6006 Thank you! I’m so glad you like these turquoise jewelries, sounds like they are made for you. Hope you have a chance to make and wear them on your birthday 🎉 ☺️🥳☺️✨✨

@mimnon6 11 ай бұрын

شكراً كثير لك. ساقوم بالتعلم منك. كل ماتفعله يبدو غايه بالجمال وشي مبتكر. شكراً لمشركتنا ابداعك. ❤

@QBeth.3 Ай бұрын

All beautiful! The wire really adds elegance to the clay pieces.

@MaggieCSAtelier Ай бұрын

Yes it does! Let me know if you tried making them. :D

@bugzVR728 Ай бұрын

L♡VING how you set the ring. Just beautiful 🩵

@MaggieCSAtelier Ай бұрын

Thank you so much ☺️ I’m so glad you like it .

@user-zb2pz3sn5j Жыл бұрын

Love this! 🌸💕🌸

@charlottephasha3450 Жыл бұрын

BEAUTIFUL! Thanks for sharing

@MaggieCSAtelier Жыл бұрын

So welcome Charlotte!

@anapauladasilvaguimaraes7810 3 ай бұрын

Lindos, parabéns! 👏👏👏👏

@MaggieCSAtelier 2 ай бұрын

Muito obrigada 😊✨✨

@user-zb2pz3sn5j Жыл бұрын

It’s so beautiful! Thank you very much! 🌸💕🌸👍😄

@MaggieCSAtelier Жыл бұрын

Thank you Ahren, so sweet of you ☺️🧡

@rosariotrejo8768 Жыл бұрын

Love it 😍

@MaggieCSAtelier Жыл бұрын

Thank you 😊🧡

@donnar9864 Жыл бұрын

WOW.. that ring is GORGEOUS 🔥

@MaggieCSAtelier Жыл бұрын

Thank you Donna! ☺️🧡

@user-lr5cx1ni4r 2 жыл бұрын

Maggie!!! Yes, girl! These are gorgeous. I’m so thankful for your vlog. I’d love to hang out with you and drink coffee and make jewelry.

@MaggieCSAtelier 2 жыл бұрын

Hi J….! I’m so happy to see your comments :) I’d love that too, always say yes to coffee ☕️😆

@user-lr5cx1ni4r 2 жыл бұрын

@@MaggieCSAtelier Haha, me too. I am a coffee fanatic. I have a question for you. When you hammer an earring, like a crossover threaders, how do you hammer it smooth without texture? I hope that makes sense. I want to hammer part of the wire up half way but without the texture. I've tried but it's never smooth. Video, maybe?

@MaggieCSAtelier 2 жыл бұрын

Hello J :) I’m not 100% sure with your design. I think if it’s threader, means they are not joining at one of the end. To hammer on it, you could try to open up the threader like how you open a jumpring. Then hammer on the parts you want. Another way would be you hammer the parts first before the wires crossover. Maybe send me the picture of the design, then I might be able to create a video for that issue. :)

@user-lr5cx1ni4r 2 жыл бұрын

@@MaggieCSAtelier I will try to do that. I’m computer stupid so I’ll have to figure it out. Lol. Thank you so much.

@MaggieCSAtelier 2 жыл бұрын

@J Sure, let me know how it turns out. You can also send me pictures to any of my social media links. But let me know when you do, because I don't check on them that often. :)

@amberm2777 2 жыл бұрын

I love these! The ring is my favorite but they are all fantastic. Thank you for sharing ❣️😊😊

@MaggieCSAtelier 2 жыл бұрын

Thank you Amber….! I’m so happy reading your sweet comment ☺️🤍

@KTcov 9 ай бұрын

Beautiful ❤

@MaggieCSAtelier 9 ай бұрын

Thank you! 😊

@boobandit13 2 жыл бұрын

Gorgeous 😍

@MaggieCSAtelier 2 жыл бұрын

Thank you …! ☺️🧡

@joanneburns7704 2 жыл бұрын

It was great seeing you make the earrings, bracelet and ring - Beautiful work :)

@MaggieCSAtelier 2 жыл бұрын

Aw… Thank you so much Joanne, so sweet of you ☺️🧡

@m.holmes4915 2 жыл бұрын

Beautiful

@MaggieCSAtelier 2 жыл бұрын

Thank you! ✨

@jujulagessegaljewelery5667 Жыл бұрын

Amazing ❤

@MaggieCSAtelier Жыл бұрын

Thank you 😊🧡

@arpitarpanchali Жыл бұрын

Wow amazing ❤

@MaggieCSAtelier Жыл бұрын

Thank you. 😊

@farrahwallis4110 Жыл бұрын

Love the ring design. That's the only part of jewelry I've never made.

@MaggieCSAtelier Жыл бұрын

Thank you 😊 Hope you have a chance to try making that too.

@marugeniazapata5514 10 ай бұрын

Muy lindos te felicito 💐💝 por tu trabajo maravilloso mucho arte ❤

@MaggieCSAtelier 10 ай бұрын

Gracias por tus amables elogios. ☺️🧡✨

@MilkyCollective 2 жыл бұрын

Love this! I hope you do more with polymer clay! I own a PC small biz and love learning new techniques! Thanks as always Maggie!

@MaggieCSAtelier 2 жыл бұрын

So welcome Daj! I’ll be including more PC jewelry definitely. Just let me know even if you want to see some specific techniques:) Wishing you all the best in your PC biz too ✨

@MilkyCollective 2 жыл бұрын

@@MaggieCSAtelier thank you so much! 🤍

@nienna1970 Жыл бұрын

I have never worked with polymer clay...you gave me feed for thoughts...I shall give it a try x

@MaggieCSAtelier Жыл бұрын

It opens up a whole lot of design possibilities for me, let me know if you ever try :)

@josefalaura 5 ай бұрын

So beautiful

@MaggieCSAtelier 5 ай бұрын

Thank you so much :)

@thinkingclearly24 Жыл бұрын

Thank you for lessons in measuring

@MaggieCSAtelier Жыл бұрын

My pleasure 😊

@JaneThomas58 Жыл бұрын

Love your channel

@MaggieCSAtelier Жыл бұрын

Thanks so much Jane :)

@aidasoto2936 11 ай бұрын

Muy lindo todo echo desde mi como lo otras cosas que muestra conozco mi trabajo desde los 80 en la upr. Desde niña. Desde mi vida pasada.

@MaggieCSAtelier 11 ай бұрын

Muchas gracias. Espero ver tu trabajo algún día. :)

@portraitofalady_ 2 жыл бұрын

Oh Maggie, you outdid yourself. Well done, these are just gorgeous. 😍

@MaggieCSAtelier 2 жыл бұрын

Oh thank you darling ….! I’m glad that you like them ☺️🧡

@AyeSha-iv4sb Жыл бұрын

Can we use cross peen/jewellery hammer thats is 10 or 50mm head instead of chasing hammer for flatten the wire?

@MaggieCSAtelier Жыл бұрын

Hi I’m using chasing hammer because the dome head could create ‘a gradual’ flattening piece. Not quite sure if the flat head of cross pein hammer could do that. Let me know if you ever try.

@hitanshipathak1872 Жыл бұрын

Its a lovely set. But please may I know from where did you get the earring posts..Can u please share the link.

@MaggieCSAtelier Жыл бұрын

Thank you. I got mine from local seller but I’ve included similar ones in description below video. :)

@rachaellarsen5600 5 ай бұрын

So clever! Do you need to coat or treat the brass wire so it doesn't tarnish and discolour?

@MaggieCSAtelier 5 ай бұрын

Thank you! Yes you can send it for gold plating or polish it with renaissance wax to prolong the shine. But I normally don’t because I can give it a quick polish with flex shaft if there’s any discolouration.

@aidasoto2936 11 ай бұрын

Conozco mi trabajo

@MaggieCSAtelier 11 ай бұрын

Gracias :)

@jazzy_jz 2 жыл бұрын

This looks amazing! I am new to polymer clay and hoping to ask some advice. Can you bake with sterling silver or tinned copper wire? Also couldn't you assemble the earrings before baking?

@MaggieCSAtelier 2 жыл бұрын

Thank you! I’ve only tried goldfilled and bare metals, so I’m not so sure with tinned/coated copper. I think silver would be fine. The polymer clay beads would deformed a little here and there when I insert metal wire into it, then there’s quite a bit of reshaping to be done before baking. To keep the earring beads in better shape, I drilled holes after baking, which would give me a cleaner look on the beads and the drilled holes for inserting the metal parts.if you happen to experiment with tinned copper insert into the beads, let me know the result . Hope this helps! :)

@jazzy_jz 2 жыл бұрын

@@MaggieCSAtelier Thank you so much!

@oselplante3203 22 күн бұрын

What type of drill do you use? These are so pretty 😍

@MaggieCSAtelier 22 күн бұрын

Thanks so much :) You can check out all the materials and tools list down below video description. ✨

@gibuxdorf 11 ай бұрын

Love this video! I have a question it’s my first time making earrings . So I already bought 20g Gold Filled Round Half Hard Wire is that also work in the oven?(regular oven from home)

@MaggieCSAtelier 11 ай бұрын

Yes it’d work fine as long as you are using low temperature. I’ve used 110- 130 degree and it was fine. Get an oven thermometer to be sure of the heat of your oven is accurate. Enjoy making! :)

@gibuxdorf 10 ай бұрын

Thank you for your answer do you put the wire in all of the earrings ? Because in the video you put just in one sorry I’m really new with this also I can’t make the shape right. All of my design I can’t have it in the same shape different sizes 😢 because got so sticky

@MaggieCSAtelier 10 ай бұрын

I didn’t put wire in all the beads as it requires quite a lot of reshaping after that. (But it’s an option for those who doesn’t have a flex shaft) I prefer drilling holes after baking the beads. This method produce clean holes for the beads. If the clay got sticky, reduce the use of acrylic paint and let the clay sit around for a day or two before cutting. Hope this helps:)

@JaneThomas58 Жыл бұрын

Lovely. Are you using artificial or real leaf?

@MaggieCSAtelier Жыл бұрын

Hi it’s faux gold leaves, product link is in description below the video :)