I don’t think there’s anyone else on KZfaq with better instruction on how to work on dirt bikes . Am I right?

I’m glad your healthy enough to make a video!!! But don’t push it stay safe Cam✊🏼sending prayers your way keep fighting man. Bike is looking pretty trick.Pryme!

I have been following this build since day one there has been a lot of things that I have learned that no other channel has showed me I have found that you explain more than anyone else on KZfaq

What a great build . I really like the attention to detail. Looking forward to a great new year of watching and learning from you . Thank you

Looking awesome buddy, hope you’re feeling better💪🏻

happy new year Cameron, hope your doing well with the recovery.. stoked for a new vid!!

Pryme!! I have really enjoyed watching this build series. I am currently stripping down and restoring a CR125 and I have been using this series as a way to keep me on track and to get ideas about how I want to restore my bike. Thanks for always delivering excellent content!

cameron you are the best guy to rebuild the dirt bike engine so far in intire 50 state of america ,step by step installation at the same time the parts are soooooooo clean ,thanks brother cameron for watching

Happy new year Cameron to you and your family!! I'm so happy to see you doing well !! I absolutely love your builds especially the cr250 , you are a very talented person and have a great eye and attention to detail !! Keep it up , I learn something new from every video you put out THANK YOU SO MUCH for your time and knowledge!! I have a 06 crf450 with a 2000 Cr500 engine I'd love to have you pimp it out!! It's a nice bike now BUT with your abilities I'd love to see what you could do with it !!

What's your goal for 2019? Mine is to get this CR250 done and ride the nuts off of it😆

03 250 here as well. Been watchin your vids from the beginning. Glad tou showed how to line up markings on the kickstart spindle gear... Took mine off and didnt know how to line it up right again. Hope your doing well. Happy new year! Keep it pryme!

One thing to remember is some times when you replace the pads, lines and caliper seals you can bleed the brakes and it's still going to feel spongy until the brakes are bedded in. I've had that happen to road bikes it might not be the same on single disc systems but just a tip for anyone who might be struggling. I also use a wet rag as it stops the fluid ruining paint. Great video and very clear instructions, happy New year and hope to see more progress soon :)

Happy new year Cameron! I just couldn't wait to hear this thing scream!!!😜

I am so hyped about this bike,I am waiting for this video since at last 2 weeks and now i have to wait 9 minutes. Hell yeah its fucking good!!!

Glad to hear you are doing better cam! Always think of you when I'm out riding. Keep it pryme.

Pryme, been a while since your last video, got worried! How’s ur health lately? My cousin is 40 with pancreatic cancer so I️ know how your family must feel about this whole mess, stay strong, and keep up the good vids!💪

Looking good Cameron, keep chugging along man. Ride, Wrench, Repeat

I want to see this thing go fullspeed

I've been waiting for this video a long time brotha, she's looking so unique, can't wait to the final reveal, keep it up man!

Cam you are looking stronger and healthier, hope you keep healing up and get back into the swing of things. Your ability to brush off adversity and struggle inspires others. Stay strong and keep it PRYME👌

So excited to watch the new vid Hope u get better

I can’t wait

Hundreds and hundreds of hours of hard work and dedication finally coming together. Love it. Keep doing what you are doing.

Pryme I love the build man it is starting to look sick can’t wait to see the finished product

Happy New Year bud! Hope your recovery is going well and I can't wait to see what you've been up to with the CR.

YEEES!! hyppped af!

Bike is looking fantastic and its great to have you back Cameron.I am now looking for a bike as a project bike as you have inspired me to take on a project.Thanks

Pryme your bike is looking so good. I have been working on a 2000 CR250R. It’s a play bike,needing some love. I went with the Galfer front rotor kit to help stop the old girl. Love your videos.

Bike is looking sick 👍🏽💪🏼

Looks amazing almost shame to get it dirty....hmmm lets go ;)

Such a beautiful build, so glad you gove so much informations how to install things, and for what you have patience about!

The brown cerkaote combined with the red details looks just amazing. Im hyped for all the upcoming videos and seeing it completed. Good job 👍🏼

I’ll say it once again, Pryme

Do a conversion kit on it with 2018 plastics

Can’t wait to see what you’ve got in store for the rest of the bike!!! It’s absolutely killer! Bike is already looking pryme!

Pryme! Sick build love the colors and cant wait to see you rip it on the track!! Great job keep up the awsome work cam.

Looking good 👍

I’m really tryna win... pryme

You make the best videos. Hope you're ready to ramp up getting this CR250 done soon!!

PRYME!! that bike is looking so trick can’t wait to see it finished!!! I really want to see it on mxa or something because who would want to see this beauty!. Also hope everything is going well for you even though you looking your best right now and you’re being so strong hope the best for you and can’t wait to see the finished bike!!!!

Cameron... tbh I’ve been subscribed for like almost a year now. I never actually watched your videos tho, seemed really boring to me. But then when I was so bored, I actually watched one of your videos and instantly watched almost all your videos (yep, even the old ones) I admire you and love how you put so much detail into your work. Still kinda thought you were a douchebag tho. But when I saw that you were hookin other people up with stuff, I felt like you deserve wayyyyy more than 150K subs. Like I see you comment everywhere, yet you just aren’t getting big for some reason. THEN, when you got cancer, I actually became so sad for a while, I just re watching all your videos. I felt really bad for you, since Just life overall f*cked you over. Not only did I become sad, I also became scared... I am always painting things for my dirt bikes as well, and found out the paint has lead, which causes cancer. Now, whenever I paint, I ALWAYS wear a mask... I’m glad you’re up and running, and hope you fight cancer off, as well as gain many many many more viewers. Love ya, CAM STRONG ❤️! (PS. Pryme)

this is going to be the of the best looking cr250's around. excited to see the rest of the build.

Pryme! Glad to see you looking healthy Cam!! Hope you had a great Christmas and New Years.

great job on the CR250 man! i've recently started watching the video's and it's really great to see how you're explaining every single step along the way. trough these video's i maybe want to rebuild a dirtbike for myself. Keep up the good work. Greetings from the Netherlands

Looks awesome so far! Keep up the good work, and good health be with you! You are an inspiration to many others! Pryme.

Pryme, keep up the good work man! You're killing it.

Dude I’ve been watching your CR build since day 1! The moment you got the bike I was like bad ass! I’ve got a 02 also I got this year and I want to do this same thing I just don’t know where to start! I’m excited for you to finish this thing and hear her screeeeaam!

I'm lovin' this build Cameron! You've already shown me how to do so many things on my dirt bikes that I was sure I would have to pay through the nose to have someone else do it (cerakoting and powder coating come immediately to mind!). Keep it up man! Can't wait to see you ride it!

So stoked on your channel man. Im rebuilding a 1990 cr250 and have been watching your videos religiously! This is my homework before I start the build lol

Pryme!! Picked up a 2000 cr 250 r, will be using your video catalog to go through it. Keep up the vids bud, god bless!!!

Also love how slow the build is going, gives us more to think about, and I'm much happier to watch it when you upload it. Stay strong Cam! ❤️

Welcome back.....Merry Christmas and Happy New Year! Hope all is well with you. I can hardly wait to see you throw a leg over the 250 and shred!

Pryme! Great to see you doing OK. I really like your videos. You are the king of the cleanest dirt bikes on the planet! I appreciate all your video shooting and editing as well. Lots of work. I wish more people understood what that takes!

pryme am glad to see you making videos again buddy, am buiding a 99 cr 250 as well, not near as nice as yours but a great winter project! thanks for the inspiration!! all the best

Been watching the build since it started and I love it and it makes me wanna do my own

Excellent work on the bike and this was another great video. I needed the syringe kit last week. I ordered the kit for the next time I will work on the brakes. Thanks for putting the kit together.

So happy to see you're back at it Cam, can't wait to see the end result! *Pryme*

PRYME 🤙🏼 Man it’s crazy to see your progress in recovery. You’re looking great man, stay healthy and keep that 250 progress going

This is too sick. Just discovered you and you’re so honest and real. Keep it up buddy!

PRYME ;) awesome. can't wait to see it finished. Happy new year buddy. We got the same goal for 2019, but my cr250 99' is a bit less fashion! still working really great, and so happy to smoke many 450 with it ahah. Keep on doing the sick job we definitely love it

Wow that trick with the syringe and the brake fluid is amazing you're a genius dude I'm gonna have to use it for my street bikes as well as my dirt bikes!

Hi Cameron, Brilliant vids! Some pointers for future builds: a) Al does not mix with steel/brass etc., that brassy finish will cause corrosion due to the dissimilar metals. Mild steel is similar though the colour is less obvious to the eye. Scotchbrite and Stainless is best for surface cleaning and for best finish use buffer attachments and metal polishing soaps or pastes. b) when refitting the bearings heating the casing and freezing the bearings is fine, but don't use the freeze spray near the casing.. If you accidentally hit the hot casing with the spray it will cause granular cracking in the cast aluminium. You won't see it but it will give future problems with strength and corrosion. c) Given the size of the casings, it should be enough to heat the case in the oven only by the way, but drop the bearings in as soon as it comes out of the oven. This may be impacted by the number of bearings. Reheating will loosen the bearings already placed due to the rate of expansions between Fe and Al metals. What you can do is make a sandbox to hold the casing and heat the both. This will retain the heat a lot longer giving you the time you need. d) Get a sheet of plate glass and engineers blue to check flatness before assembly where mating flat surfaces is important. Better still an engineers surface table. I'm a 63 yr old dinosaur who did an aircraft apprenticeship before the days of assembly exchange rather than fixing it. All too often I come across "professional" engineers who are limited by a belief that you only replace and return assemblies; you must not delve into the inner workings. It's great to see you getting stuck in to the deeper nuts and bolts. Even more so as following your voyage of discovery from mishaps brings a real world level people can relate to. Hopefully more people will get stuck in based on your example. As you've said when completing a section, "it's easier than you'd think". Best of luck for your future, despite your hurdles you've got a great attitude.

Pryme! So satisfying, I enjoyed every minute of this video. Also good to see you going strong!

Perfection!! As always.. Can't wait for the next episode. Keep up the good work cam and hope your feeling better.. Best wishes for the new year!!!!

I got a 2004 crf250x and those covers would look sick on my bike! Also glad to see you are doing well I love watching your videos as they are informative and fun to watch. PRYME

I aspire to someday have the amount of skill, persistence and attention to detail that you have. I also want to get a dirt bike but my parents want me to finish the projects I have right now.

Can’t imagine how long it takes for you to film this, so many different shots and such high quality, awesome stuff Cameron

Pryme. Love watching your vids. I got a 03 cr125 I’m slowly building when I get extra money. Your 250 is gonna look sick can’t wait to see it done.

Totally inspired by you Cam...a year of illness has left me wanting to throw a leg over a dirt bike once again! It's been 15 years since I last owned/rode one (had a horrendous crash because of another rider) and I'm looking to buy something soon! I'm torn between buying new or starting a project bike...we'll see what pops up in the classifieds in the meantime! Wishing you all the best with health & happiness...RIDE ON!

So nice to see you back on the project. It’s looking real nice!😍

This is by far the best channel I have ever watched for wrenching tips

I’m glad to see your doing well Cameron! I’m jealous of your build, I wish I had the knowledge to take on a project like this.

Next video please!!!! Hahaha. I’m lovin this series. Can’t wait to see it done and you riding it’s nutz off!!!! What a beautiful machine. That thing’s going to run bette than a 2019 straight off the assembly line!!

this thing is looking amazing Cameron, lots of great looking details! definitely taking some tips from you for my next build ;)

This build is coming along sick! This bike is gonna be ridiculously nice when it's all done! PRYME!

Great to see you making videos again Cameron stay strong man, pryme

I’ve been waiting for a 250 vid for so long this does not let down, thank you good sir

The looks of this Honda is so satisfying already. Keep it PRYME!

Just love this build, when will the next vid be up? Can’t wait for it! Great job Cam.

Wow. Happy seeing you doing well!

pryme!! love the vids bro keep it up love to see you going strong seeing as everything going on! your doing an amazing job on that old honda, cant wait to see the finished product! :)

Pryme buddy ,glad to see ya again ,great video as always , gladd to see your back on the build ,im starting soon on a kx 250 1998 , greets from belgium

You're an artist Cameron. This bike is gorgeous!!

Pretty sick way to start off the year, gives me more motivation to achieve my goals too

Super dope Cameron can’t wait till the bike is finished! Pryme.

Great looking build. I can't help but to comment on the way you bleed the brakes. As a car mechanic, i've bled the brakes on maybe a thousand cars and in doing so I learned a thing or two. The way you fill the system up from the bleed screw to the master cilinder and then pumping it back out through the bleed screw, you're first pushing the air up, only to pump it back down. The risk in this is that you trap air in the caliper as they are meant to be bled pumping fluid through from the master to the caliper, the bleed screw is located on the top of the caliper to make sure no air can stay in the system. Now, I understand that you dont want to pump 50 times to bleed it. If you fill the master and open the bleed screw, gravity will bleed 95% of the brake as the fluid travels down through the system more easily than the air travels up the system through the fluid. Therefor, if you open the bleed screw and wait for the fluid to come out and then pump it once or twice with the screw open, you will 9/10 times have bled the brake already. On the 1/10 times this doesn't quite do it, close the screw, put pressure on it and open screw like normal. Do this once or twice and it's definately bled. It becomes tricky when you have ABS systems that you have to electronically unlock but that's not an issue on dirt bikes. Get well soon!

Nice job Cameron, you would make a great shop teacher. You have a positive, informed delivery, and attention to detail. Two minor things, you shouldn't roll the aluminum bars in the mounts like that, as it can score the aluminum, make a riser, and possibly crack on a big hit/landing. Also, the forward clamp bolts should be snugged up with the clamp touching, and then the rear(closer to rider) bolts tightened, creating the clamp. Thanks for the videos. Enjoy the CR, I love my '95! Happy New Year.

Nice Bike Cameron! Can't wait to see it complete!

Sick bike Cam, and I know you wont let'r be a pavement queen eiither. Cant wait for the footage of you tearing up the track on it. Love the color combo too, great job man. God bless bud

This bike looks good so far I have a problem with my back brake hopefully I could try your method

Pryme I would love those I just busted my front brake one and am looking for a new one Love the awesome videos your putting out and glad to see you are beating cancer 🤘🏼🤘🏼

Cameron, i like the work that you spend on your bike. i am from germany and i think you put so much love an work in your dirt bike, much more than many other guys do it with there street bikes. I like your videos so much and i have seen all your videos in a row at one day. All the best for you, your familiy and all the best wishes for your health. You are a real bolts and nuts man. And happy new year :-)

Esta quedando increíble! Espero ver pronto ese motor en marcha. Saludos desde chile! Y espero te sientas mejor!!!! See ya!

Dude this bike is sick! Watchin since day one! All the best in 2019 Cam!

Pryme! I'm dying to see it finished! happy new year Cameron from Arg 🇦🇷

Feels really good to see you back in the shop man! Pryme!!

Nice vids. I use an old plastic block when bleeding bike brakes to replace the pads an rotor. That way if you have a spill nothing get ruined.

PRYME! I’d love to have these on my 19’ CRF250R! I watch all your videos & this is really the first thing that would fit my bike!!

Pryme. Keep up the good work 👌🏼 thanks to your videos I was able to service my front Öhlins forks for my Honda CRF-250-2014. Sincerely nordicmx,Sweden

Pryme, videos are solid cam cant wait to see the 250 finished and running!