Making Rotary Welding Table

Рет қаралды 4,315,354

3 жыл бұрын

The rotary table is powered by an electric motor from the mobility scooter, the tilt of the table is driven by the wiper motor from the Audi A8 B4. I powered the engines with a 24v / 12v 16.7A two channel power supply, I used a 40A voltage regulator to set the rotation speed of the table top. The table top has a diameter of 800 mm and a thickness of 8 mm, thanks to which the table's capabilities are very large, the table can be used as a welding positioner, as an assembly table or a plasma cutting table, Repair work can be done on the table, and thanks to the electrically adjustable table top, the work is less strenuous.

Пікірлер: 749

@TinMan0555 2 жыл бұрын

Having seen your work in the past, I knew it would be a well constructed and useful tool. But, when you added the tilt feature, it went over the top! Well done Sir!

@mrb4342 2 жыл бұрын

Amigo, I don't know what kind of Genius you are to work metal, but let me tell you that you are one of the best and how we deserve in our Mexican land. You are !!UN CHINGON AMIGO!!

@oddjobbob8742 2 жыл бұрын

You never cease to amaze and inspire and entertain. I only wish you would speak to us as you create. Thank you again for sharing your brilliance! At about 14:30 I realized you were making the work table. I thought, “that might be thick enough if it were 10-12 inches (25-30 cm) or so. But 2 ft? No way.” Then you very creatively used the corners to make buttresses. I thought, “way.”

@Kokosha3110 3 жыл бұрын

Молодец! Супер стол, мечта сварщика! Инструмент и станки твои так и просятся творить чудеса

@thebonermaker 3 жыл бұрын

now having a rotary table makes way more sense after watching this. thank you. I have a motor with a worm gear box that I've been thinking for years what I should do with it. I think building one of these is the plan now.

@gilmartramontin2891 3 жыл бұрын

wetct

@edgardoeliecervargasvislan6295 3 жыл бұрын

@Pedro72740 2 жыл бұрын

@@Inspiracion_ you have crabs

@Pedro72740 2 жыл бұрын

I don’t think you understand. I didn’t come here to save Rambo from yo. I came here to save u from him.

@_Waldezas 2 жыл бұрын

I was surprised that you did not use thrust bearings for axial load of the table. Other than that, thank you! Your videos are super awesome!

@anands6127 3 жыл бұрын

20:08 Made my day.What a wonderful welding. This project is much useful than I thought earlier.I have to say this tool /machine is wonderful. keep it up 👍

@Marcelo-56 3 жыл бұрын

Of all the people I see working on KZfaq videos, you 👈 are the best qualified professional, your projects are very well developed and they are very useful complement tools👍

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@normandjosebustilloherrera2928 3 жыл бұрын

Está excelente su invención, adelante y ánimo, eso es otro nivel. FELICIDADES.

@chrismaestrelli3943 3 жыл бұрын

Seu trabalho é incrível, parabens

@ronwhittaker6317 2 жыл бұрын

best I've seen ya do so far and you have done a lot of good stuff useful stuff. I think this gets at a production level more than all the other stuff so far. near-perfect wields with little effort after the real effort is done is invaluable you could run this thing while getting a lot of little stuff done around the shop. in short, I LIKE IT!

@user-bd2yt6rf6e Жыл бұрын

Professional and capable man. Blacksmith, electricity and controllers. You didn't leave anything to others wow

@STRATTONSGARAGE 3 жыл бұрын

I would really love to build a table similar to this. You did a fantastic job showing the basics on how to accomplish this. Thank you so much for making this video, and by the way could you please give me some idea of what this would cost in materials using US dollars. Thank you so much.

@MrTIGERH1752 3 жыл бұрын

Excellent build. I loved the use of materials, and the construction using basic tools available to everyone. This is a very inspired project. Thank you for sharing it with us. Tim

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@poontang7546 3 жыл бұрын

Sorry you are wrong, the video is edited . No real fabricator will rely on those mag squares for a start. No showing of plans & drawings either , try to build something like this out of your head , not impossible but very improbable.

@ernestmurphy3898 2 жыл бұрын

@@poontang7546 Poon Tang you are wrong most fabricators use and verify the mag squares to start with. The editing was done well to reduce the length of time it took to buy and load and unload the metal from the truck and removing the gear motors from the vehicles and crimping the lugs on the ground straps. He did show you how he drilled and painted. I am favorably impressed with his editing skills as well as his engineering skills.

@Thewatson77 3 жыл бұрын

Man this is a SERIOUS piece of machinery! Very well planned and executed 🙌🏻

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@user-hy6zn9nl3j 3 жыл бұрын

Очень интересный вариант,у автора талант! Жаль что не могу на его языке высказать благодарность за идею.пусть удача ему сопутствует во всех его начинаниях!

@WorkshopFromScratch 3 жыл бұрын

Спасибо 😁

@harvindersingharora3845 3 жыл бұрын

Fantastic! Multi purpose table which gives, winning edge for precision projects.

@Pedro72740 2 жыл бұрын

No it doesn’t.

@montwolfman 3 жыл бұрын

Absolutely top notch. Innovation;10+. Craftsmanship; 10+. If it's worth doing, do it right and this weld table is all about rugged and versatile. I would pay serious $ to have it in my shop.

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@reaper060670 Жыл бұрын

When u marked out that SQ piece of steel plate and cleaned it then drilled the holes and cut those perfect slots and rounded the table off by hand with the grinder I could only say WOW!!! Oh my GOD this guy is phenomenal.. Ur builds are so inspiring my friend.. As I'm typing these words I'm actually smiling to myself. U have built some of the best things I've ever seen in videos about metalwork.. I wonder have u ever thought about building a full on milling machine CNC style of even ur own Lathe?? I'm certain it would be another great build from ur good self my friend.. I would love to be learning from a teacher like u if u were teaching this art.. It's a pleasure to watch ur videos pal.. Keep up the great work .. I'm spreading the word as often as I can too. 4.2mil views on this video and I'm only catching it today. That tells u how new to this I really am bro.. LOL.. Salute from Dublin, IRE..

@pierdolio 3 жыл бұрын

I'm stunned at how well you've thought out this project . Keep up the fabulous work.

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@gustavoadriangiudice397 3 жыл бұрын

Gracias amigo por compartir sus trabajos. Viendo su video uno se da cuenta de todo el trabajo que lleva una maquina y porque tienen el costo que tienen aveces. Saludos desde Mendoza Argentina.

@user-zy7mf9qd7c 3 жыл бұрын

Очень круто. Спасибо за видео. Вы вдохновляет многих. Удачи.

@exposingthedarknesswiththe9190 3 жыл бұрын

*VERY CLEAVER AND FUNCTIONAL FOR MANY JOBS...WELL DONE!!*

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@fonhollohan2908 3 жыл бұрын

That should come in handy for lots of forthcoming projects. nice job! I use to use one of those for welding up lift rods for heavy Equipment.

@mauriciomendez9081 3 жыл бұрын

Excelente trabajo eres muy preciso en tus trabajos mucha experiencia

@rickpalechuk4411 3 жыл бұрын

Awesome build! That unit is so pro man! Great vid, thanks for sharing. Cheers

@WorkshopFromScratch 3 жыл бұрын

Thank you :)

@metallrabotka7823 3 жыл бұрын

Основательно и добротно! Не совсем понятно зачем такой толстый металл для корпуса, но видимо так задумано! Классный стол, молодец!

@colinabell3672 3 жыл бұрын

Great job. Only thing I can think of to add is some concentric circles scribed into the table for easier setups

@kelleysimonds5945 3 жыл бұрын

That's got to be the best rotary table I've seen.

@lyteyearz5810 3 жыл бұрын

This is the kind of content I hope to find on KZfaq. Excellent work!

@007paulhopper 3 жыл бұрын

Seriously impressive, seriously impressed. Well done sir

@benmiller5015 3 жыл бұрын

Awesome build. I can see that coming in handy on future builds. Mad genius

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@philparrott4424 3 жыл бұрын

Showing your building plans and maybe a picture of the finished project first would encourage people to watch your videos more.

@MYEVILTWIIN 3 жыл бұрын

1.8M views in 3 months ain’t bad for not having any of the above !

@ernestmurphy3898 2 жыл бұрын

@@MYEVILTWIIN Indeed sir.

@petermarsh4993 Жыл бұрын

Wow, this is truly a Man sized rotary table. Put a couple of kids on top and spin them till they were sick! Too much fun. I have one constructive criticism. Instead of square headed cap screws, try black round headed cap screws. They won’t stand out as much but do exactly the same job. Brilliant work overall and so well done. Cheers.

@Patriottoo2 3 жыл бұрын

Amazing, useful tool! And, it took only a little over 20 minutes to build. I should have mine ready to use by tomorrow. :-)

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@ernestmurphy3898 2 жыл бұрын

Ha ha ha, i am sure. It took weeks to build this from paycheck to paycheck to buy the steel and components, and planning the next steps.

@dougdroneflyer5807 3 жыл бұрын

Excellent Job! ... I just wish I had all the metal for all the projects he does! ..LOL! .. Great Video .. Keep up the "GREAT" work!

@martinibarrola7789 3 жыл бұрын

Un genio 👏👏👏 capo capo !!!! Un saludo desde Argentina

@user-jb5oy1xz1h 3 жыл бұрын

จรัญ/รอดตะเภา/ดี/ดี

@javierreyesperez6744 3 жыл бұрын

MUY BUENO Y SOBRE TODO QUE PERMITIO EN SU MAYORIA VER COMO LO INICIO DEDE CERO, FELICITACIONES, DESDE COLOMBIA

@igory17 3 жыл бұрын

Это лучший вариант позиционера что я видел!

@michalrakowski3720 3 жыл бұрын

Bardzo dobra robota👌👍👏👌👍👏 super ogląda się twoje filmy pozdrawiam

@WorkshopFromScratch 3 жыл бұрын

Dziękuję 😁

@silvergrizzly316 3 жыл бұрын

I don't think this guy really plays these videos 2 or 3x faster there speed, I actually believe he is that good. Pure AWESOMENESS!!!

@Kevin-gx8lc 3 жыл бұрын

Excellent design and build quality. Very well done Sir! Greetings from Southport UK.

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@DIYFixMan 3 жыл бұрын

Champion!! Well done. I loved your video, you have good hands and you are very talented. I loved what you built, it looks super quality!

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@tamerlanhan35 3 жыл бұрын

Очень крутые инструменты.А главное,что все работает очень точно.

@user-fp6sz6lp9f 3 жыл бұрын

Ну по сравнению с заморчью функционал ни о чем.

@hobi.kerja13 3 жыл бұрын

Hallo brooo.... Good morning (in indonesia)🇮🇩🇮🇩🇮🇩🇮🇩🇮🇩😁😁 from a loyal audience, loyal subscriber

@WorkshopFromScratch 3 жыл бұрын

Good morning Broo 😁 Thank you 😁

@MrLucius3247 3 жыл бұрын

Bel lavoro.Molto talento e precisione.

@faniepretorius5534 3 жыл бұрын

Excellent idea for help in the workshop. Well done.

@WorkshopFromScratch 3 жыл бұрын

Thank you :)

@jiwbink 3 жыл бұрын

PLENTY STOUT ENUFF!! GOOD ON YA!

@11sprials11 3 жыл бұрын

You are a master builder! Awesome!

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@mabul513 3 жыл бұрын

Adding transformer from broken microwave to electric magnets to help get pieces in position without clamps. With laptop supply would make this complete

@user-kt2hb8xr3p 3 жыл бұрын

Thanks 🤩😍🤩 عمل رائع شكرا لك اخي

@MCsCreations 3 жыл бұрын

Pretty fantastic work, dude! 😃 Really amazing!!! For soldering it should be fantastic! 😃 Stay safe there with your family! 🖖😊

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@riterfranachoreyna5865 3 жыл бұрын

Exelente idea amigo Saludos desde PERÚ!!!

@flanagin_the_bot1188 3 жыл бұрын

what kind of taps do you use? sorry if this has already been asked. You are a master at the stuff you build

@gregmiller4332 3 жыл бұрын

The speed at which you work is incredible ; )

@wittemotor100 3 жыл бұрын

Excellent work! Thanks for sharing!👍

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@scottwilliams6257 3 жыл бұрын

Man! what do you do for your day job build carnival rides? That's awsome👍

@MHolt13 3 жыл бұрын

Ok, this build is INSANE! 😳 I have been wanting to buy one for a while, but this is way over the top!

@WorkshopFromScratch 3 жыл бұрын

Thank you :) You don't have to buy, you can build, it will be much cheaper to build than to buy

@alexkiller9051 3 жыл бұрын

руки золотые, голова на месте👍

@bakirbadjou1156 3 жыл бұрын

thanks for sharing ideas and techniques. very helpful

@pauloamaral8780 3 жыл бұрын

Trabalho muito bom. Parabéns

@stanthur88 2 жыл бұрын

the microphone stand was a nice touch..........................well done

@syamsurisyam8280 Жыл бұрын

Sangat mengesan kan ,cara Anda bekerja ,Trima Kasih Atas Info my , Smoga Anda Suxes slalu ,..

@tatusiowyteatr Жыл бұрын

Prosty pomysł, a jaki przydatny!!!

@jdwisdom9433 2 жыл бұрын

It's attractive, big enough, and hell for stout! Thanks, JD

@django902 3 жыл бұрын

Muito show, parabéns trabalho incrível

@holiveira5743 3 жыл бұрын

Parabéns! Incrivel!

@murataflytunov223 3 жыл бұрын

Конечно сделанно классно в заводских условиях.

@MickMcMadder 3 жыл бұрын

Another great project build. Very nice work indeed.

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@baobel9056 3 жыл бұрын

Très fort. Bon courage d'Algérie.

@citysad7233 2 жыл бұрын

عبقرية الفكرة وابداع في التخطيط واتقان في العمل سلمت يداك وتحية لك من syria

@reyllangomes2561 3 жыл бұрын

Tem brasileiro vendo esse gênio em ação

@usuarioextremo4116 3 жыл бұрын

tem curiri

@norbertcoy1775 2 жыл бұрын

Ein super Teil, sehr gut konstruiert und angefertigt. Werde ich nachbauen!

@GabbyTech 3 жыл бұрын

now i want this well done, overkill yes its perfect

@lulutio7767 3 жыл бұрын

Il as seulement de la joie de bonheur de te revoir 👍👍👍👍👍👏👏👏👏

@WorkshopFromScratch 3 жыл бұрын

Merci :)

@EVgenrator 3 жыл бұрын

Сделано отлично! Но скорость вращения я бы убавил.

@mark6092 3 жыл бұрын

I built something like this. I made oilfield parts that needed many rings from, 12, 22 and 50mm steel plate. You can order disks from steel supplier and cut out the centers cheaper than you can order rings. I drilled a centering hole and piercing hole and used oxy/propane to cut. I would buy a dewar of liquid oxygen that cut all I could before it off gassed.

@hadritoys 3 жыл бұрын

agreed

@rekzaprokonveksisablon1278 3 жыл бұрын

the tutorial is very helpful. thank you. I hope you are always creative!!!

@Rich_0505 3 жыл бұрын

Super Salam from Tajikistan

@marceanddiane 2 жыл бұрын

Great video, very impressive . Do you have the plans for the build? Your work, looks great.

@user-cc1vc5ks5i 3 жыл бұрын

Мастеру браво и респект. Молодец. 👋👋👋👍👍👍🤝🤝🤝

@donsmith9081 3 жыл бұрын

Talent!

@BrutusMetalArt 3 жыл бұрын

That’s a wonderful piece of craftsmanship!

@hfdzl 3 жыл бұрын

Nice project, I can see many hours of thought to get things right. Thanks !

@richiedwards4953 3 жыл бұрын

fantastic work, well done

@WorkshopFromScratch 3 жыл бұрын

Thank you 😁

@joaomaglianooliveira1348 2 жыл бұрын

Parabéns show ! Projeto muito bem , 👏👏👏🤝🤝🇧🇷🇨🇮

@user-pm8ym3qi8y 3 жыл бұрын

Я, конечно, восхищен техническими знаниями этого человека, но от результатов проделанной работы ожидал большего..! Смотрел полностью без перемотки и, весьма, разочарован - столько труда, материалов... И что с этой крутилки такая большая польза..? Я сам сварщик, но мне бы и просто хорошего стола хватило.

@user-uu9dv2gg4y 3 жыл бұрын

Реально бесполезная вещь хоть и красивая. Только в серийном производстве для однотипной работы пригадится и то после доработок, непонятно как идеально по центру заготовку выставлять