Making The Ender 5 S1 is MUCH FASTER with a Sonic Pad

  Рет қаралды 27,300

Randy May

Randy May

Жыл бұрын

This was a quick & easy way to speed up your Ender 5 S1 or other printer with Klipper. I have also designed a nice mount for this setup to be everything nice and clean.
Check out The feral engineer for my helpful info - / @theferalengineer
US store: Coupon Code:12ES5, get 5S1+Sonic pad Combo $120 off, only $479
Creality Ender-5 S1 (From Creality) - bit.ly/Creality-Ender-5-S1
Creality Ender-5 S1 (From Amazon) - amzn.to/3FwHVUI
Creality Sonic Pad (From Amazon) - amzn.to/3YZUYoy
Creality Sonic Pad (From Creality) - bit.ly/Creality-SonicPad
Use code 5S80 to save about $80 on the Ender-5 S1 Speed Combo
Ender-5 S1 3D Printer Speed Combo(From Creality) - bit.ly/Ender-5-S1-3D-Printer-...
Enclosure Options:
Acrylic Enclosure for Ender-5 S1 bit.ly/Ender-5-S1-Enclosure
Soft Tent Enclosure - amzn.to/3GMXwkj
Other 3D Printer Enclosure - bit.ly/Creality-3D-Printer-En...
Sonic Pad Mount For Ender 5 S1:
Ender 5 S1 Sonic Pad Mount 3D Files - bit.ly/Ender-5-S1-Sonic-Pad-M...
Hardware:
4 x M5x35mm amzn.to/3ZdikHL
6 x M3x12mm amzn.to/3Tq27NS
2 x M3 Brass Inserts 4mm x 5mm amzn.to/3Jpicil
If you doing to be building other things I suggest getting some hardware kits. They are a better bang for the buck. Here are some links to stuff that I used.
M3 Stainless Steel Hex Socket Head Kit - amzn.to/3JuH4oX
M5 Stainless Steel Hex Socket Head Kit - amzn.to/40115uq
Heated Brass Threaded Insert Kit - amzn.to/3ToPEKu
Heat Pressing Machine - amzn.to/3M2KtOK
Heat-Set Insert Tips - amzn.to/3nszAvg
Creality K1 3D-Printer (From Creality $599.00) - bit.ly/Creality-K1-3D-Printer
Creality K1 3D-Printer (From Amazon $699.00) - amzn.to/3CXlrdT
Creality K1 3D-Printer (From CrealityOfficial $648.00) - bit.ly/Creality-K1-3D-Printer...
Build Plate Upgrades for the Creality K1:
PEI Double Sided Magnetic Build Plate for K1 (Only $18) - amzn.to/449CVQq
PEI Printing Plate Kit With Cutouts like the Original ($26) - amzn.to/43bIgWb
Replacement & Upgrade Nozzles For the K1:
Ruby Volcano Nozzle Abrasion Wear Resistant High Flow 0.4 - amzn.to/3nt7IYd
Brass Volcano Nozzle M6 Thread Nozzles 0.4mm - amzn.to/44tNaQ8
0.4mm volcano Hardened Steel Nozzle - amzn.to/412d9v0
Parts & Video to Swap Out or Upgrade the K1 Extruder -
Sherpa Mini Extruder (Extruder Replacement Option) - amzn.to/43dIrjw
Bondtech LGX Lite Extruder (Extruder Replacement Option) - bit.ly/Bondtech-LGX-Lite-Extr...
Creality K1 Extruder Mod - Nathan Builds Robots - • Creality K1 Extruder Mod
Bambu Lab Printers:
Bambu Lab P1P 3D Printer (US) - bit.ly/Bambu-Lab-P1P-3D-Print...
Bambu Lab X1-Carbon Combo 3D Printer (US) - bit.ly/Bambu-Lab-X1-Carbon-Co...
Bambu Lab UK Store - bit.ly/Bambu-Lab-UK-Store
Bambu Lab EU Store - bit.ly/Bambu-Lab-EU-Store
Enclosure for the P1P:
Bambu Lab P1P Enclosure Kit amzn.to/46AeGfA
ARC Bambu Lab P1P Enclosure STL Files - www.printables.com/model/3563...
3d Printer Filament That I Use:
PolyLite ABS - bit.ly/PolyLite-ABS
PolyLite ASA - bit.ly/PolyLite-ASA
PolyFlex TPU 95 (Flexable) - bit.ly/PolyFlex-TPU-95
PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue
NylonX Filament - bit.ly/MatterHackersNylonX
PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA
TECSONAR Tricolor PLA - amzn.to/3H79d5N
Build Series PLA - bit.ly/MatterHackersBuildSeri...
Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMat...
Build Series ABS - bit.ly/MatterHackersBuildSeri...
Build Series PETG - bit.ly/MatterHackersBuildSeri...
PRO Series Filament - bit.ly/MatterHackersPROSeries...
Amazon 3D Printing Filament:
PLA - amzn.to/3gsLE9Z
PETG - amzn.to/3pXjjvu
ABS - amzn.to/3wsTRjS
ASA - amzn.to/2RX8dtM
Polycarbonate - amzn.to/3cLdr38
Nylon - amzn.to/3iNGeI2
________________________________________________
Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
#3dPrinting #3dScanning #DIY #RandyMay

Пікірлер: 93
@randymay
@randymay Жыл бұрын
US store: Coupon Code:12ES5, get 5S1+Sonic pad Combo $120 off, only $479 Creality Ender-5 S1 (From Creality) - bit.ly/Creality-Ender-5-S1 Creality Ender-5 S1 (From Amazon) - amzn.to/3FwHVUI Creality Sonic Pad (From Amazon) - amzn.to/3YZUYoy Creality Sonic Pad (From Creality) - bit.ly/Creality-SonicPad Use code 5S80 to save about $80 on the Ender-5 S1 Speed Combo Ender-5 S1 3D Printer Speed Combo(From Creality) - bit.ly/Ender-5-S1-3D-Printer-Speed-Combo Enclosure Options: Acrylic Enclosure for Ender-5 S1 bit.ly/Ender-5-S1-Enclosure Soft Tent Enclosure - amzn.to/3GMXwkj Other 3D Printer Enclosure - bit.ly/Creality-3D-Printer-Enclosure Sonic Pad Mount For Ender 5 S1: Ender 5 S1 Sonic Pad Mount 3D Files - bit.ly/Ender-5-S1-Sonic-Pad-Mount Hardware: 4 x M5x35mm amzn.to/3ZdikHL 6 x M3x12mm amzn.to/3Tq27NS 2 x M3 Brass Inserts 4mm x 5mm amzn.to/3Jpicil If you doing to be building other things I suggest getting some hardware kits. They are a better bang for the buck. Here are some links to stuff that I used. M3 Stainless Steel Hex Socket Head Kit - amzn.to/3JuH4oX M5 Stainless Steel Hex Socket Head Kit - amzn.to/40115uq Heated Brass Threaded Insert Kit - amzn.to/3ToPEKu Heat Pressing Machine - amzn.to/3M2KtOK Heat-Set Insert Tips - amzn.to/3nszAvg Creality K1 3D-Printer (From Creality $599.00) - bit.ly/Creality-K1-3D-Printer Creality K1 3D-Printer (From Amazon $699.00) - amzn.to/3CXlrdT Creality K1 3D-Printer (From CrealityOfficial $648.00) - bit.ly/Creality-K1-3D-Printer-Official Build Plate Upgrades for the Creality K1: PEI Double Sided Magnetic Build Plate for K1 (Only $18) - amzn.to/449CVQq PEI Printing Plate Kit With Cutouts like the Original ($26) - amzn.to/43bIgWb Replacement & Upgrade Nozzles For the K1: Ruby Volcano Nozzle Abrasion Wear Resistant High Flow 0.4 - amzn.to/3nt7IYd Brass Volcano Nozzle M6 Thread Nozzles 0.4mm - amzn.to/44tNaQ8 0.4mm volcano Hardened Steel Nozzle - amzn.to/412d9v0 Parts & Video to Swap Out or Upgrade the K1 Extruder - Sherpa Mini Extruder (Extruder Replacement Option) - amzn.to/43dIrjw Bondtech LGX Lite Extruder (Extruder Replacement Option) - bit.ly/Bondtech-LGX-Lite-Extruder Creality K1 Extruder Mod - Nathan Builds Robots - kzfaq.info/get/bejne/hq6Sh5V-sNimj3U.html&ab_channel=NathanBuildsRobots Bambu Lab Printers: Bambu Lab P1P 3D Printer (US) - bit.ly/Bambu-Lab-P1P-3D-Printer-US Bambu Lab X1-Carbon Combo 3D Printer (US) - bit.ly/Bambu-Lab-X1-Carbon-Combo-3D-Printer-US Bambu Lab UK Store - bit.ly/Bambu-Lab-UK-Store Bambu Lab EU Store - bit.ly/Bambu-Lab-EU-Store Enclosure for the P1P: Bambu Lab P1P Enclosure Kit amzn.to/46AeGfA ARC Bambu Lab P1P Enclosure STL Files - www.printables.com/model/356301-arc-bambu-lab-p1p-enclosure 3d Printer Filament That I Use: PolyLite ABS - bit.ly/PolyLite-ABS PolyLite ASA - bit.ly/PolyLite-ASA PolyFlex TPU 95 (Flexable) - bit.ly/PolyFlex-TPU-95 PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue NylonX Filament - bit.ly/MatterHackersNylonX PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA TECSONAR Tricolor PLA - amzn.to/3H79d5N Build Series PLA - bit.ly/MatterHackersBuildSeriesPLA Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMatterHackers Build Series ABS - bit.ly/MatterHackersBuildSeriesABS Build Series PETG - bit.ly/MatterHackersBuildSeriesPETG PRO Series Filament - bit.ly/MatterHackersPROSeriesFilament Amazon 3D Printing Filament: PLA - amzn.to/3gsLE9Z PETG - amzn.to/3pXjjvu ABS - amzn.to/3wsTRjS ASA - amzn.to/2RX8dtM Polycarbonate - amzn.to/3cLdr38 Nylon - amzn.to/3iNGeI2 ________________________________________________ Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍 ________________________________________________ #3dPrinting #3dScanning #DIY #RandyMay
@3DPrintSOS
@3DPrintSOS Жыл бұрын
Great showcase and awesome mount for the pad! This year is going to be crazy for 3D Printing. So many options.
@randymay
@randymay Жыл бұрын
Thanks and yeah definitely there's going to be a lot of interesting printers coming out this year. 😁
@steev182
@steev182 Ай бұрын
I have an Ender 5 Pro that I haven’t used for ages, have been looking at all the X1C, K1 Max and K2 a lot recently. Anyway, I just ordered a Sonic pad to get it back up and running after watching this instead of just buying a Bambu or K1, as I’d rather not let the Ender 5 go to waste! I’ll probably get a K2 later in the year for the multifilament support and larger build volume.
@cobalttyreal
@cobalttyreal Жыл бұрын
I got one of these Sonicpads for Christmas and it has been amazing. not having to constantly swap the micro sd alone was half the value for me. but the speed boost out of the box was really cool and I frequently boost the print speed to 200% with no issues on my ender 3 v2.
@randymay
@randymay Жыл бұрын
That's good to hear and yeah it really does speed up the printer without your having to really do anything
@trsfc1595
@trsfc1595 Жыл бұрын
Very informative Thank You
@randymay
@randymay Жыл бұрын
😁
@madderall_dot_com
@madderall_dot_com Жыл бұрын
Feels like a missed opportunity to truly test the limits of these machines. Who cares about a 15 minute calibration cube when my stock bed-slinging cr10 Smart Pro does it with Marlin? The whole point of Klipper is that you can let any machine loose without much loss of quality, yet you've managed to run the 5 s1 at slower speeds than it can achieve out of the box.
@randymay
@randymay Жыл бұрын
Understandable criticism. Honestly I just don't have weeks to spend doing trial and error on something for one video. For the most part I show a lot of what the out of the box experience is like and if it does anything without doing tons of tuning. And just adding the Sonic pad to this printer did speed it up quite a bit. I do like 3D printing and I use it as a tool but I don't really care to get into the super fine details of tuning something to its maximum potential. I mostly just use the printers to make designs that I have created for prototyping or for production. 😅👍
@madderall_dot_com
@madderall_dot_com Жыл бұрын
@@randymay Different strokes for different folks. Nothing wrong with that. I guess seeing " Ender 5 S1 is MUCH FASTER with a Sonic Pad" in the title is what created a certain set of expectations and I felt disappointed that they weren't met. Otherwise good video, good sound, camera work and lighting. P.S For someone designing/prototyping the speed may matter even more than for someone making production-ready prints, since there can be dozens of small changes before something is ready for production and you just don't have all day to wait on the new iteration to finish printing.
@nachtdiertje1972
@nachtdiertje1972 Жыл бұрын
I'm having a Ender 3 V2 with a sonic pad and since this week, a P1P. Honestly said, the P1P takes the cake. I've been a creality-fan for a long time, but BambuLabs has taken over. The Ender does a very good job, no doubt about it, but the P1P does a better job in a much shorter amount of time. The Sonic Pad is a great addition to the Ender and speeds it up and improves the printquality, but again, the P1P wins again.
@randymay
@randymay Жыл бұрын
Oh definitely It does speed up the printers but it can't speed them up to the speeds of the P1P. I can see using the Sonic pad on existing hardware to speed it up a bit and get some more life out of it before having to upgrade. And with all the companies now racing to compete with bambu lab. I foresee seeing a lot more printers coming out very soon with specs similar to the P1P and X1 carbon.
@nachtdiertje1972
@nachtdiertje1972 Жыл бұрын
I doubt if there will be similar printers soon, like the P1P/X1. What I think is a very big plus for the Sonic Pad, is that it can manage multiple printers (also non-creality) from 1 screen, to a limit of 4. To my opinion, that's a big advantage, looking to other systems. So in theory, you can "enhance" 4 printers and control them too.
@randymay
@randymay Жыл бұрын
@AnotherCG umm ok, you can say that about just about any 3d printer company that hasn't made faster printers yet....
@itzmemaariocleantaps8201
@itzmemaariocleantaps8201 Жыл бұрын
what is the best printer under the bambu P1P? i am a beginner i am looking for 2 weeks now but stil cant choose what printer i like to buy. mabu 1p1 price is to high for my as beginner thx let me know what you think
@nachtdiertje1972
@nachtdiertje1972 Жыл бұрын
@@itzmemaariocleantaps8201 Start with a cheap bedslinger and learn to tinker with it. That way you save some money if you damage something and trust me, you will. After a couple of month/year, start thinking about a new one like the K1, newest prusa or bambu labs. This last one is also rather idiotproof for beginners in my experience.
@TheTygrane
@TheTygrane 6 ай бұрын
I'm a bit late to this video, but figured it's worth mentioning here that as of January 2024, the E5S1 can be had for as low as 299 at Microcenter as of this comment, and the SonicPad for ~130. With an afternoon of tuning, i've found the built in profile has accelerations at 5k, but my specimen can handle upwards of 8k with no degradation in quality. (As to quality, Bambu firmware has also improved over the past 10 months too, so the tradeoffs get muddier). If you want a turn-key printer, it's Bambu. If you enjoy the tinkering and tuning, that's Ender's bread and butter. Both are good buys if they fit your needs/budget. I have the E5S1 sitting beside my X1C. Both are in constant use, and both are churning out quality prints.
@alexpoe5973
@alexpoe5973 Жыл бұрын
Haha I did the same thing on the sonic pad I got it saw all the scratching on it after a week. Then seen a youtube video that said it had a protector on the glass screen for shipment Thanks Creality for making the plastic film invisible. 😂
@randymay
@randymay Жыл бұрын
😅
@mjdarby714
@mjdarby714 Жыл бұрын
Yeah I used mine for about a month and was super annoyed that it scratched so easily but there was a plastic film on the screen that I never noticed. The screen itself actually seems to be glass and looks much better once the plastic film comes off. Mine was practically invisible, couldn't tell it was on there.
@randymay
@randymay Жыл бұрын
That is very good to know and I will have to take that off ASAP haha
@dabooge
@dabooge 8 ай бұрын
You can flip the screen in settings.
@gabrielruiz8388
@gabrielruiz8388 Жыл бұрын
Amazing video. You forgot to do the input shaping for Klipper, that should remove the ringing on the prints
@randymay
@randymay Жыл бұрын
Yeah I was going to do that later on but the profiles built into Masonic pad already have some sort of input shaping already done. After moving it on to the ground it looks like it took care of a lot of those ringing problems. Seeing that the table I was printing on is not very sturdy. 😁
@rockels_journals
@rockels_journals 8 ай бұрын
The Ender 5 S1 is now around €200 here at the moment in Europe. Which seems to be a verry sharp price for this machine then. Even thinking buying 2 of them now.
@randymay
@randymay 8 ай бұрын
That's not a bad price for sure right now
@Densmode3dp
@Densmode3dp 5 ай бұрын
Little late but you don’t even need 2, this one has been updated to run up to 4 machines, or 3 with 1 webcam
@gunracksonline
@gunracksonline Жыл бұрын
Thanks for the video and info. Have the X1c and don't use my other enders as much now but looking at the sonic pad to help reduce the run times.If you remove the sonic pad is the original firmware still on the printer stock board? if not is here a way to back up the original and reload it?
@randymay
@randymay Жыл бұрын
So you can reflash the printer with the original firmware to get it working as normal. You will have to find this firmware on the Creality website
@MrBlappy
@MrBlappy Жыл бұрын
All you have to do is save the Merlin firmware on a SD card put it into the machine (with the correct configuration from Creality) then turn on said machine. It will install the new firmware and will be back up and running. I had to do this a few time with my Ender 3 Neo (Non V2) because creality still hasn't created a profile for that machine yet. it took me about 3 weeks to find the right klipper language to talk with the Neo. It is now running and will be getting my S1 Plus is about a week to run them both on klipper and the sonic pad.
@badewannenwikinger2522
@badewannenwikinger2522 Жыл бұрын
Nice Video.. THX.. did you have Fast Profiles for us? And.. I LOVE ENDER 5 S1 :)
@randymay
@randymay Жыл бұрын
Unfortunately I don't have any fast profiles to share, I was just using stock setting or upping the print speed
@scotty2salty327
@scotty2salty327 Жыл бұрын
Hey thanks for the coupon code! B&H had the ED5S1 for $399 but the Sonic is $170. I just ordered off Creality with your coupon for $511 sweet deal! Thanks! I have two Flashforge printers now and I've been looking for a faster open source printer to add to my lineup so I can crank out PLA prints. Really excited about the new set up.
@randymay
@randymay Жыл бұрын
Oh very cool and thanks. Let me know what you think of it once you get it up and running
@scotty2salty327
@scotty2salty327 Жыл бұрын
@@randymay you bet. Have you tested out smaller nozzles and smaller extrusion widths with it yet? I'm wondering how it is with detail at slower speeds and say a 0.2 nozzle. I ordered a set of 5 different size nozzles from Micro Swiss as well.
@randymay
@randymay Жыл бұрын
I haven't messed with any smaller nozzles on this printer and 0.4 is really as small as I will go on a FDM printer. To me it's just not worth the extra time to bet smaller layers. If anything I go up in size to 0.6 or even 0.8 so print larger things faster. If you are looking for small part printing with fine details you might want to look into resin printing. Resin printing can also be my h faster and you can print at 0.05 layers
@scotty2salty327
@scotty2salty327 Жыл бұрын
@@randymay I've been collaborating with my vinyl ghapics company and doing business cards. QR codes and logos. Currently I use my FF Adventurer 3 and a 0.3 nozzle and get pretty good results. It's more horizontal detail not vertical so I keep layers at 0.2mm but extrusion width currently at 0.18mm. I get very good results and can turn out a card in about 1.5 hrs. I may look into resin at some point but for now I'm going to test the limits of the ED5S1. I'll let you know how that goes too.
@randymay
@randymay Жыл бұрын
Oh ok that makes more sense. I see a lot of people getting printers like this wanting to make highly detailed miniatures and to me it just doesn't make sense to do when resin is much faster, cleaner and easier. But what you are doing makes total sense.
@1incutheta
@1incutheta Жыл бұрын
WHAT?!? Stickers!!!!! You have to use them!
@randymay
@randymay Жыл бұрын
Lol
@stevejones01
@stevejones01 Жыл бұрын
It comes with a screen protector in the Box check everything I almost lost mine too
@kevinwinklaar6273
@kevinwinklaar6273 Жыл бұрын
nice fast review! can i put more than 1 webcam using the sonic pad?
@randymay
@randymay Жыл бұрын
Thanks and I honestly don't know.
@JediSymon
@JediSymon Жыл бұрын
Hi again, I am interested in printing the supports you made to place the pad as you did, but I sliced one of the lateral supports and Cura says it will take around 4hrs, and in your video says you did it in almost 2 hrs. Any suggestions to improve the time? Although, I am not yet using the sonic pad, I guess that may be a cause.
@randymay
@randymay Жыл бұрын
Yeah I was already using the Sonic pad when I did that print. And kira sat around the same time for me as well but with the sonic pad setup and going you could see in the video how long it took and those are all pretty much standard settings or the default settings in draft mode so the 0.28 mm layer height
@christrimble7936
@christrimble7936 Жыл бұрын
I'm still relatively new to 3D printing and I got this so that I can send things straight to the printer without the SD Card. I have had issues with the temp I set and slice reverting to a preset on the Sonic Pad. My last print also seemed to stop pushing out filament but kept moving through the print as if filament was still coming out. I check it and it wasn't clogged. Anybody seen this or know of a solution?
@randymay
@randymay Жыл бұрын
Did you ever figure out the answer to your problem?
@efreitorhabibulin238
@efreitorhabibulin238 Жыл бұрын
I dunno, at that price with all the modifications, I feel like at this stage it's just better to bite the bullet and get flsun v400, it's just too good out of the box
@randymay
@randymay Жыл бұрын
Yeah that is definitely an option. At the same time the bambu lab P1P pretty much just worked right out of the box and set up only took about 15 to 20 minutes. So it's all really going to depend on what printer you want.
@jri212
@jri212 Жыл бұрын
Good thingI waited for the K1
@randymay
@randymay Жыл бұрын
Yeah the K1 is definitely a bit better than the enter 5 s1 with the Sonic pad but at the same time it does have some problems and I'll have a video out on the K1 in probably a few hours.
@jri212
@jri212 Жыл бұрын
@@randymay Yes, it has issues, they sent me another hotend, the new hotend has a bolt-in heater not soldered anymore
@Cutlerylover4life1
@Cutlerylover4life1 10 ай бұрын
Bump
@MyTechFun
@MyTechFun Жыл бұрын
5:44 not fair comparison, the left is printed with 0.3mm layer height, the right one with 0.2mm.
@randymay
@randymay Жыл бұрын
What was printed at 0.3mm layers?
@MyTechFun
@MyTechFun Жыл бұрын
@@randymay the calibration cube on P1P (the cube on the left side)
@randymay
@randymay Жыл бұрын
I thought I used the default settings at 0.2mm for both.
@changita
@changita 10 ай бұрын
I am running into so many issues right now and I just got the ender 5 s1 sonic pad bundle, there were bed leveling issues and then I have restored to factory settings and recalibrated and Switched out the usb-c cable and it still stops mid print and keeps giving the Klippy shutdown error due to disconnect from mcu, I tried to reset my 3D printer so I can use it with out the Sonic pad and it won’t, when I flashed the firmware to use only the 3D printer and I hit the reheat, the printer Reboots and loops in restarting so it won’t heat if I try to not use the sonic pad
@randymay
@randymay 9 ай бұрын
Did you contact Creality support about this problem?
@mykehdoom
@mykehdoom 10 ай бұрын
Why is your machine shaking with the sonic pad?
@randymay
@randymay 10 ай бұрын
It's on a table that's on wheels that is not stable whatsoever so any movement is going to move those around. Also just because it has the input shaping doesn't mean that it doesn't put vibrations through the machine.
@Silentdeath1194
@Silentdeath1194 Жыл бұрын
I have an ender 5 s1 without the z switch will it still work and be faster ?
@randymay
@randymay Жыл бұрын
It should and there is an option in the sonic pad for that printer
@Silentdeath1194
@Silentdeath1194 Жыл бұрын
@@randymay I found it thank you
@Silentdeath1194
@Silentdeath1194 Жыл бұрын
​@randymay I installed the sonic pad but it still takes over an hour to print a benchy it doesn't seem like it's any faster
@randymay
@randymay Жыл бұрын
@@Silentdeath1194 What is your print speed set to?
@Silentdeath1194
@Silentdeath1194 Жыл бұрын
100% I'm a noob where do I check that
@kylewalling520
@kylewalling520 24 күн бұрын
so wheres the mounting file?
@randymay
@randymay 24 күн бұрын
www.printables.com/model/435500-ender-5-s1-sonic-pad-mount
@JediSymon
@JediSymon Жыл бұрын
Question for anyone out there with an Ender 5 S1 and Sonic pad. Does using the sonic pad mean I definitely will not use the Ender´s screen anymore?
@randymay
@randymay Жыл бұрын
Yeah the screen no longer works at all after the install. You will have to reflash it back to stock firmware to get the screen to working again.
@JediSymon
@JediSymon Жыл бұрын
@@randymay I kinda figured that out the bad way hehe. Though I wanted to check with more people. Thanks man! Happy printing!
@michael-y8c
@michael-y8c 4 ай бұрын
Whats with rhe super sonic talking speed.. do you need to pee?😊😊
@randymay
@randymay 4 ай бұрын
Slow down the video and I will sound drunk 👍
@michael-y8c
@michael-y8c 4 ай бұрын
@@randymay hahaha 😆
@nickp385
@nickp385 Жыл бұрын
When I put a file from cura on the USB thumb drive it does not read it. Is there a certain way or file I need to use to print from the USB drive? Thank you.
@randymay
@randymay Жыл бұрын
Are you plugging it into the Sonic Pad or the printer?
@nickp385
@nickp385 Жыл бұрын
@@randymayI tried all three open ports on the Sonic Pad. No matter what port I try, nothing comes up in the list. I have tried three Sonic Pad's and sent them back, thinking something was wrong. Do you have any idea what I could be doing wrong? Thank you for writing me back.
@stevejones01
@stevejones01 Жыл бұрын
It comes with a screen protector in the Box I was surprised I found it by mistake
@randymay
@randymay Жыл бұрын
I will have to check for that. Thanks 👍
@CultivatedLaser
@CultivatedLaser Жыл бұрын
@@randymay Its a piece os cheap plastic on the screen. You didnt scratch the glass
@CB_agotchi
@CB_agotchi Жыл бұрын
Where's the screen protector?
@CultivatedLaser
@CultivatedLaser Жыл бұрын
@@CB_agotchi on the screen 🤣😂🤣😂🤣
@stevejones01
@stevejones01 Жыл бұрын
@@CB_agotchi Mine was in a plastic bag with the paperwork. I almost threw it away.
Creality Ender 5 S1 + Creality Sonic Pad Speed Combo Bundle Review
27:36
Branchus Creations
Рет қаралды 13 М.
Klipper on Easy Mode? Creality Sonic Pad + Ender 5 S1 Quick Test!
13:36
EVOLUTION OF ICE CREAM 😱 #shorts
00:11
Savage Vlogs
Рет қаралды 9 МЛН
Amazing weight loss transformation !! 😱😱
00:24
Tibo InShape
Рет қаралды 64 МЛН
Sonic Pad Ender 5 S1
30:03
Nathan Builds Robots
Рет қаралды 20 М.
The TRUTH about 3D printers | Creality Ender 5 S1 vs Ender 3 V2
13:11
Ender 3 V3 SE Nebula Kit Upgrade
9:13
Red Dot Geek
Рет қаралды 2,5 М.
15 Unnecessary (But Fun) Ender 5 Mods
21:08
Guys Shop
Рет қаралды 20 М.
Ender 5 enclosed lid and heated chamber guide
11:45
Teaching Tech
Рет қаралды 136 М.
Creality Sonic Pad - Easy Klipper for the S1 Pro
10:42
Jim Overton - Jimson's Stuff
Рет қаралды 21 М.
Pushing the Ender 5 Plus to 300mm/s
6:56
andrewesquivel
Рет қаралды 15 М.
UNO!
0:18
БРУНО
Рет қаралды 1,8 МЛН
😳 Это ПРЕВРАЩАЕТ всё в ПИЦЦУ !
0:28
Настя, это где?
Рет қаралды 6 МЛН
Быстрые листья для голубцов
0:36
Мистер Лайфхакер
Рет қаралды 7 МЛН
WORLD'S SHORTEST WOMAN
0:58
Stokes Twins
Рет қаралды 112 МЛН