Making another sign out of PVC. This time it's for Harmony In Motion.
Thanks to Joe DiLaura for suggesting to do the v carve tool path first then followed by the clearing tool paths. This was a game changer for sure! The amount of fuzzies to be dealt with at the end was reduced by at least 90%. Unbelievable results!
Please Like & Subscribe! Thanks!
Link to get great CNC accessories:
pwncnc.com/?ref=bx35DHIqtXpdQG
Use coupon code “BILLTRACY” to get 5% off!
Oramask stencil film: amzn.to/45aLewx
XFasten double sided tape: amzn.to/4aqIsF9
Amana 1/4 inch 0 Flute: amzn.to/4aDoZBz
SpeTool W03005 1/8 inch 0 flute: amzn.to/4cJ6Nrs
SpeTool W03012 1/16 inch 0 flute: amzn.to/43M1G5O
Amana 45613 45° V Bit: amzn.to/3QeKSPt
Rustoleum spray paint: amzn.to/3X2GIOI
** Feeds & Speeds for this video in order of bits used:
Amana 45613 45º 1/4” V-Bit
• 14,200 RPM
• 35 IPM Feed Rate
• 60 IPM Plunge Rate
• 20% Stepover
Amana 51404-K 1/4” 0 Flute
• 12,000 RPM
• 200 IPM Feed Rate
• 60 IPM Plunge Rate
• 25% Stepover
SpeTool W03005 1/8” 0 Flute (used again for final profile cut - same settings)
• 18,000 RPM
• 80 IPM Feed Rate
• 60 IPM Plunge Rate
• 40% Stepover