MAKITA Rear Handle 36V: It's Good, But Do You Need It?

Рет қаралды 297,068

Күн бұрын

The Rear Handle, Makita DRS780 aka XSR01 amzn.to/2GRwvMH
My Little Makita saw amzn.to/2Sq4TBP
Music is "Blue Harvest" by Johto / blue-harvest
...
I'M ON INSTAGRAM TOO
scottbrownc...
The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
My Tools
Tool belt amzn.to/3dXMZnk
Tool belt shoulder straps amzn.to/3AI0VLU
Hammer with wooden handle amzn.to/3jRhQ92
Rubber grip for hammer amzn.to/3jTM7UE
Speed Square amzn.to/3yAaE5f
Makita Circular Saw amzn.to/3qYzaKH
Track Saw amzn.to/3dV9wkF
Awesome ratchet clamp amzn.to/3dSGa6s
Impact driver (main drill) amzn.to/3xDmBat
Other drill for pilot holes amzn.to/3yAYjh4
My Table Saw amzn.to/2UzuOxp
My favourite vacuum (newer version) amzn.to/3yxss0S
Full face mask amzn.to/3hH4Cce
Ear muffs amzn.to/3yNAWBl
Green line laser level amzn.to/3yqYdJ0
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Aeropress (Coffee) amzn.to/3ijpvdQ
Donate here if you would like to help the channel
www.paypal.com/cgi-bin/webscr...
SEND STUFF TO HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer:
These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this KZfaq channel and shall not have any liability in respect of any injury or damage that may result.
To view full disclaimer, click here: www.scottbrowncarpentry.com/d...

Пікірлер: 392

@perihelion7798 4 жыл бұрын

I don't need it, but I want it. Want is more powerful than need.

@MrMvp8402 4 жыл бұрын

It's not crazy powerful, I like it but Milwaukee and Dewalt have way more power, makita one is smoother cutting though, "feels like a Ferrari in your hand" gets thrown around quite a bit on reviews of it.

@joshhorn5131 3 жыл бұрын

I use one every day, it's my bosses and I absolutely love it. Super comfortable in hand, only complaint is the batteries are a bit awkward to get in and out

@Bradley.borg99 2 жыл бұрын

Most relatable comment I’ve ever seen

@SmuggiNOLA 3 жыл бұрын

Almost 2 years later, still don't need it, still love using it. I think I got some kind of flash deal on it at HD. 199 for saw and batteries/charger. Took the staff like half an hour to find the saw on the top shelf, box caked with dust. Wife and in-laws sitting outside in the car waiting the whole time🤣🤣 Man, I love finding a good deal!

@jadenshamas7445 3 жыл бұрын

This saw is amazing. I’m a framer here in Oklahoma and we use those saws and they’re an absolute game changer. Powerful, light, no cord hassle, long battery life. 10/10 recommend

@interman7715 3 жыл бұрын

Light ? Mate I've been framing for thirty years with a corded Makita that weighs a little over 8 pounds and I'm buggered by days end ,you'd have to be big Arny to cart that bloody rear handle Makita around all day .lol

@jeremiahduke9430 2 жыл бұрын

@@interman7715 i agree its light with work in Oklahoma. I own it and love far better than my other saws we got for the crew

@lachlanbell4689 4 жыл бұрын

I've had this saw for 3 months now and it's easily become my favourite tool I own. My favourite part of this saw is the blade depth adjustment it's so accurate you don't even need to measure sometimes! If you work with any type of joists, rafters or just normal stick framing it is so handy being able to carry it around the Jobsite to do all your cutting I haven't found anything it won't cut well yet and the stock blade stays so sharp as long as you treat it well. Those on the fence about these style of battery saws don't even think twice just buy it!

@whitechris720 4 жыл бұрын

This past Saturday I was working with a buddy. He needed to rip about a dozen 2x6 down. I loaned him my makita rear handled saw. He wasn't convinced it was the right saw for the job. After ther job was done he kept saying I am getting that saw. I love mine, I also have other smaller makita saws.

@bradleyplatt9816 4 жыл бұрын

I’ve been sat here patiently waiting for the review of this!

@MrKlarthums 4 жыл бұрын

RPM may be similar, but remember the linear velocity of the outside cutting edge will be significantly faster on the 7 1/4" / 185mm blade than the 6 1/2" / 165mm blade. About 14% faster if my math is correct.

@vzgsxr 4 жыл бұрын

That's some Engineering Explained info right there. 👍

@SadalDay 2 жыл бұрын

@@vzgsxr thank goodness for smart people

@recommit 4 жыл бұрын

I use the little 165mm every day. Love that saw, small, light & cuts most of the things you need throughout the day.

@MrGamepants 4 жыл бұрын

I love the fact that were finally getting so much power out of these cordless saws. I remember getting the old 18v dewalt circular saw which was really only usable for small punch out and that was pushing it. I've been using the milwaukee fuel 7 1/4 for the past few years only pulling out the corded when I need to cut stacks of material. A couple weeks ago I just picked up the Skil cordless after the milwaukee decided to drop about 30 ft to a concrete basement which it didn't really like. I was on the fence between the makita, dewalt and the skil. Like you, especially when it comes to tools that are used all day every day, I buy the ones that I think are going to work best, be more productive, and hold up rather than just being in a battery platform or a specific brand. The skil sold me the first day out cutting wet 2x10 yellow pine rafters on a rainy day just going through them like it was nothing. Even though the saw is heavy it's smooth, comfortable, and familiar since I've used the skil 77s for years the adjustments just feel second nature to me. I love seeing what other carpenters around the world are doing it's extremely interesting. Keep up the quality work!

@olebole19 4 жыл бұрын

Discovered you randomly after searching for some reviews on diamondback toolbelts. I think ive watched every video you got here on KZfaq now! Keep making great content 😁 shout out from a Norwegian carpenter 🇧🇻

@ScottBrownCarpentry 4 жыл бұрын

Cheers mate

@cliftonobrien588 4 жыл бұрын

I had always used the classic right blade corded makita's for framing etc. It took a little getting used to the little left blade cordless (same one you have), especially when cutting bevels. But that little saw has proven so handy for small jobs and cutting in the roof. I may just have to get the big brother now!

@timbodtoolman7025 4 жыл бұрын

I’ve had that saw for 2 years now and it’s fantastic

@michaelplays2449 4 жыл бұрын

Great review Scott, really helpful would love the saw myself really tempted to buy after seeing your review might have too treat myself

@robhartwell8324 4 жыл бұрын

Hi Scott. Iv had one of these saws for the last 18 month, it’s a great saw but if you cutting pattens on the ground for roofs I still stick to corded but cutting the rafter feet on when up on the roof it’s the bomb. One of The best things is the left sided blade you have a lot better view of cut & you are right it’s great for framing. Keep up the great work, I always look forward to your next videos. Cheer, Rob

@SouthBaySteelers 4 жыл бұрын

I work for Home Depot. We can't keep them in the store. They're currently selling for US $249 which includes 2x5AH batteries. And you get another 2x5AH batteries free.

@17171717 4 жыл бұрын

I just grabbed this deal. It’s more saw than I’ll ever need but hard to say no at that price.

@djorig Жыл бұрын

I’ve had mine for going on two years now. It still works great like it did the first day. I use it on average two days a week.

@deeeeeeps 4 жыл бұрын

I have had this saw for 2 years. It has completely surpassed my expectations and would highly recommend it. It is so nice cordless tools are replacing my corded tool with similar or better performance without a cord. Thanks Makita!

@djfglobal3377 3 жыл бұрын

I’ve got the cordless 36 Miter box, track saw and this one ordered. Someday I’ll get a cordless phone ..😎 Glad to hear it’s still good after 2 years , still going strong?

@brianwood876 4 жыл бұрын

I've had the dewalt rear handle saw (the flexvolt) for over 2 years... Favorite power tool... If I had to go do a job and could for some reason only bring minimal tools, I'd grab my bags, my framing square, and my rear handle flexvolt

@matthewtrigwell7803 4 жыл бұрын

Best saw I’ve ever bought. Have no problems with it at all can’t imagine my life without it now

@askerdanny8 4 жыл бұрын

So glad for this video. I keep looking at it. Got the big makita 305mm aws mitre saw. Yeah it’s heavy but I’m on that platform. Got a great deal on it too

@TheMrMitchell89 3 жыл бұрын

late comment but as a carpenter specializing in deck building, I love this saw! Easily my favorite tool that I own.

@jamesandich6960 4 жыл бұрын

i own this saw, i run two 5amp batteries and it the best it has replaced my corded skilsaw mag 77 as i frame houses for a living in Ontario, Canada. today framing the 2nd floors of 3 town houses the saw lasted over 400 cuts of 2x10 i was shocked at 430 pm it cut out ( started at 7am). awesome saw, depending on what you do!

@interman7715 3 жыл бұрын

Can't go wrong with Makita ,I have a 7 1/4" corded Makita ,been using it for 20 years of framing.

@alejandropena5658 2 жыл бұрын

I just started framing and every crew has this saw

@Jarco101 4 жыл бұрын

I am a DIY, and because of you I am getting in the Makita line... can't say other thing that they are awesome!!! I have worked with a corded skilsaw, very useful and more straight cuts with the rear handle.

@Sean-mk8pw 2 жыл бұрын

I have used this saw for a long time and one big thing Ive noticed is that even though its heavier its really smooth and when Im cutting down sheathing or plywood it really feels like its just gliding through the cut its easier to track a straight line and much faster because its not constantly twitching through the cut and needing to be corrected back onto the line like my 6 1/2 does.

@warped2875 Жыл бұрын

Picked one up a few weeks ago for $259 USD. The saw w/blade, dual rapid charger (2 batteries simultaneously), nice carry bag, and (4)four 5Ah batteries, ...for $259!!! It was like buying 4 batteries on a sale price, and then getting a saw, charger, and carry bag for free.

@titangaminghull8205 4 жыл бұрын

Had mine since February 2018 and its a beast of a saw dos all first fix on site that need it to do well worth the buy

@abdcontractingltd 3 жыл бұрын

We just ordered this for our business and cant wait to put it to work on a deck soon

@mtadams2009 3 жыл бұрын

What made me decide on the smaller saw was talking to a construction crew that owned both saws. They all said the bigger saw was garbage and rarely used it. One said he built his house pretty much with the smaller saw, miter saw and a table saw. They said the weight was an issue and they said they rarely needed the additional power. Everyone on the crew were older so maybe that was factor. I am very happy with my smaller Makita. I can see for the type of work you do could be a good addition thought. For me I will save my money and plug in my old corded saw. Nice review.

@benjaminromshak9904 4 жыл бұрын

Makita just debuted the cordless 9 1/4 circular saw. That’s the way to go! Great video Sir!

@steverone7623 4 жыл бұрын

I’ve had the saw about 2 years now it’s great

@matthewmyers7440 2 жыл бұрын

So I just recently bought this saw for general construction use. I absolutely love it. Almost everything else I use is DeWalt, but my saws are Makita and I love them. This thing is a ripper forsure.

@adampease 4 жыл бұрын

I recently got the DeWalt 60v worm drive saw and love it. Tons of power. It's heavy, but it cuts through timber with no resistance. I used it to build a shed and am happy with it.

@leftfootforward1040 2 жыл бұрын

Just got this saw, been using the 165 alot but wanted something a bit more capable for ripping, which this 185 is, and it's smooth. I find it a bit heavy on the right hand side for regular cross cutting on little sticks like 4 x 2 so will keep using the 165 for that. I'm a heavy oak timber framer by trade so used to using BIG saws for big work. (Just to help put things in perspective ).

@stepansavelyonok5532 4 жыл бұрын

I bought this saw last year, right after I built my own frame house. It would be great to had one while main building was in process but it si great to have one now, there is still a lot of framing to do. Now I am thinking about buying a little one for smaller works but in my country the price of dhs680 like about 50% more than drs780.

@idwtbam 2 жыл бұрын

I appreciate hearing someone else say they get the best regardless of brand.

@HitmanDarts 3 жыл бұрын

I use it for many garden projects, cutting sleepers etc.

@cjhification 4 жыл бұрын

My folks are over there at the moment, said it's bloody wonderful weather at the moment, but we're supposed to be going to South Island next week and apparently the weather is not so hot there at the moment! Thanks for sharing as ever.

@ScottBrownCarpentry 4 жыл бұрын

Great weather!

@jeremiahduke9430 2 жыл бұрын

Im up in Oklahoma and i love this saw for concrete and masonry framing needs.

@stephenmurray4916 4 жыл бұрын

I use the 36v sidewinder. It will in no way replace my corded saws. If i was cutting a roof I would burn through batteries. It is just better to be plugged in when cutting rafter after rafter. Saying that I do love the battery saw for smaller jobs.

@richmacdod Жыл бұрын

Perfect video for me to watch! Because I’m considering buying one. Cheers

@chasinghistory8992 4 жыл бұрын

great job as usual. love your content.

@QR503 2 жыл бұрын

I have been using dewalt but I’m starting to get makita tools and love them

@terrydavenport4135 2 жыл бұрын

Been building houses for 45 years. This is my go to saw. It is powerful enough to do rips. Would be nice to have a built in light for better vision of cut. Change the batteries when one bar on the fuel gauge. Channels in the shoe plate tends to hold sawdust and then empties it into my truck. My Skil mag LT is not used much anymore. Very good saw!

@andrewwilson3663 4 жыл бұрын

Hi Scott. Like the channel and your content. No load run-time means very little. You need to compare them under comparable load. You can cut at the same depth and same wood, but of course wood does vary so it's difficult to be precise on that.

@dionisherrera9174 2 жыл бұрын

I have both , the 6 1/2 with the right blade is capable of cutting stringers out of pressure treated lumber , but it takes longer than the 36 v ,which is a beast.

@slithery-cow5 4 жыл бұрын

I have a similar size Milwaukee circular saw as your smaller one and it’s a beast!!

@clintjones1193 4 жыл бұрын

I use mine for ripping and even in wet treated 50mm it’s a beast, it does jam a bit when there’s tension in the wood but so does my corded one. And with a demo blade it’s even better

@ajthoms9536 3 жыл бұрын

What demo blade do you use with it and can that blade go through nails?

@aaroncervantes318 4 жыл бұрын

Finally a tool review!!!!! Thank you!!!

@ianjohnstone1061 3 жыл бұрын

A long time arriving to here??. A smart square, pencil & this saw - a deck can be built in short time.. Powerful!!!!

@captbill279 4 жыл бұрын

Picked mine up for $100 in the bargain bin at Home Depot. Awesome saw. Very smooth power. The rear handle makes following a line easy, I find.

@ScottBrownCarpentry 4 жыл бұрын

$100! You guys have it good over there

@frogguts1000 4 жыл бұрын

I dont need to do an apprenticeship.. im just gona watch all of Scott's vids & ill be good to go! Lol

@samcar117 3 жыл бұрын

Heck yea

@thegingerninja7131 4 жыл бұрын

I miss cooking with paerau!

@robertkressaii7046 4 жыл бұрын

He should make another channel and just do job-site meals, you know every tradie will be on it

@ScottBrownCarpentry 4 жыл бұрын

Me too!

@ZeyadLT 4 жыл бұрын

The GingerNinja bring it back Scott pareu is that funny dude we all love

@Omanastylez 3 жыл бұрын

Thanks Scott. I would love to see both of these go up against the multivolt hikoki 165mm saw.

@J4M3Z.T 4 жыл бұрын

I personally enjoy mine, its just so much more effective when running thicker plyboard and for ripping.

@adamlloyd4066 3 жыл бұрын

In my humble opinion; I like the ergonomics of the 36. For things like cutting eaves before hanging fascia. The hind battery loading occupies exactly where your wrist wants to be which becomes very obvious when making repetitive downward cuts. Love your stuff Mr. brown. “Scott brown here” is a common saying on my job sites. 🙌

@Jorf88 4 жыл бұрын

I've got the newer Dewalt DCS 578, which is the updated 60V max sidewinder. It's not a wyrmdrive/rear handle, but holy crap does it have the power. Like every other battery operated tool, it almost fools you into believing it's a toy until you pull the trigger, it's an absolute monster. Much like you, no fanboyism. I just happened to have other DeWalt tools and decided to go for that. At the end of the day, they're all just tools. They have a job that we need them to do, and most of the modern tools are well able to complete those jobs. Keep up the great content!

@cs9436 4 жыл бұрын

For corded, have a look at the magnesium Makita Hypoid saw. What a beast Keep up the great work!

@anirishwoodworkersdiary2137 3 жыл бұрын

Super saw I have my one 4 months I use it 1st fixing 2 batteries last me the day it a must have for site work 👊

@williamboucher8390 3 жыл бұрын

Another great vid from scott brown! i'm considering getting this saw, if you had to choose between the rear handle 36v or the small 6 1/2 18v brushless for your everyday use ? thanks for all your great vids! cheers from montreal, canada

@gostdeamon 4 жыл бұрын

Indeed Scott You are So correct Regardless of Right tool for the Saituation And for different folks That is how they see the best for the task at hand Battrie tool are indeed gettin better and better Even for an old hand like me

@mikemorgan5015 4 жыл бұрын

You're analysis is spot on, Scott. Taped trigger while not cutting won't tell you anything about actual run time. These saws draw a lot more amps as the load increases. It would be like testing your car's fuel economy with the car on jack stands ala Ferris Beuhler. I have this Makita and the Milwaukee rear handle. They are both great saws. The Milwaukee is a bit more powerful, but the Makita runs more smoothly. They both are beasts with plenty of power. They aren't, however, the saw to choose for light work. Being left blade saws, the site line is awesome for right handers like me. Though not a factor for me, the Makita is a great looking saw. Reminiscent of steam trains of the art-deco era I'm happy with both saws. I have a Milwaukee left blade 6 1/2 sidewinder that is the saw I always reach for when big power isn't an issue. For sheer power, I believe the DeWalt FlexVolt, and Skilsaw wormdrive are the most powerful cordless rear handle saws out there. I'm not a fan of right blade saws at all. Keep up the great work, and stay safe.

@tobiasfarnsworth3232 4 жыл бұрын

I’ve been loving the 6 1/2” saw for a couple of years now, but I’ve always had the mag hypoid saw for backup and heavier work. A few months ago my big corded saw got stolen. Bummer, but it had definitely paid its dues, so I replaced it with this 36v version. It’s absolutely amazing after a few little mods... disable the safety switch (small saw too😉), then I ground a big radius from the front inside corner of the guard to greatly improve the cutting line of sight, and then ground off the end of the acorn but on the bevel lever so it will balance on the front edge of the foot leaned up against your sawhorse 👌🏼. Now it’s damn near perfect. Another favorite feature is that it will balance nicely upside down, which helps greatly when setting up a rip fence.

@jasonstimson6617 2 жыл бұрын

I’m getting my first circ saw, I’m grabbing this monster. Honestly, I’ve done a ton of research and since I’m going into commercial giant worksights, I want to have the best quality saw with the most power/torque. I’ve already got 4 5amp batteries too. I feel if I invest early into this, if I ever need something smaller I’ll be able to grab a smaller one a lot easier then making a larger investment down the road. And I’m fucking pumped

@Jcoughlan 4 жыл бұрын

You need them both if your a pro chippy. The single battery saw is great for cutting sheet material and cross cutting timber. The rear handled one you use for ripping down lengths of timber and framing.

@perrymaxwell4488 3 жыл бұрын

As a concrete form building carpenter I use this saw. I have been building warehouses most recently and this beats wheeling a generator over a 350,000 sq. Ft. Jobsite. Cutting and ripping 15inch rim joist is a breeze. Also when building walls with high density overlay plywood, I can rip two 3/4 sheets at once with with no problem.

@SJFijianRick 3 жыл бұрын

I have the dewalt 60v rear-handle circular saw and it’s a beast

@robertrada4783 4 жыл бұрын

Scott, check out the brushless 7 1/4” x2 sidewinder. I got one for a ridiculous price ($100 USD) and it has really put an end to my interest in 18v saws (including the beautiful Mafell KS55). They make a version with a sole plate that runs on the Festool/Makita rails. They also make a cordless 10” model now (and it too runs on rails).

@PowerRepublic 4 жыл бұрын

great vid mate, thank you

@andrewacton5885 4 жыл бұрын

I have this saw. It kicks ass. The only downside is the spring on the blade guard is so strong. I pull the spring out so it doesnt push a 2x4 off the horses before the blade eats in.

@Thoughmuchistaken 4 жыл бұрын

I've got a corded Skil Mag77 so cutting power isn't an issue. But if I had any Makita batteries I probably would've got this saw for the portability and no worries about blowing fuses.

@zarvwhitford368 4 жыл бұрын

Dewalt DCS577N flexvolt saw is the shiznuts, the power and battery life is amazing, it's a bit heavier but well worth it, get it if you can!!!

@katrinabell7684 4 жыл бұрын

A very good review SBC.😎🛠🔨

@plunder1956 4 жыл бұрын

The No-load test may have triggered a safety cut out. I saw this big hand held circular saw once. At least 18" diameter. They were building a trebuchet. Huge timber sections.

@katastrophenschutzwa 3 жыл бұрын

Just the video I was looking for! Contemplating buying one but already have the smaller one. Pondering for all the reasons you’ve shown here. Only problem is, I’m addicted to makita cordless kit (and batteries!!! , 12 at the last count😂). I’ll be buying this. 😂😂👍

@ralphjane2233 4 жыл бұрын

I have both and use the big one on anything over 25 mm it is awesome worst part about the small one is i think it is for a left-hander because the blade is one the wrong side as you wear the sawdust

@jimmyklausner3041 4 жыл бұрын

Just got myself the milwuakee rear handle saw looking forward to use it alot, still wating for all the paperworks to get done about my own business :D

@stlalways6715 4 жыл бұрын

Jimmy klausner wondering where you’re from. I have never heard of this type of saw called anything other than worm drive. Similarly your higher rpm circular saws are normally sidewinders. That is what we call them regardless of if they have a rear push handle or the top/canted push handles.

@jamesadams7131 4 жыл бұрын

It's a great saw! I thought it had a 2 5/8" cut. Plenty of power!

@funriffjay 4 жыл бұрын

I learned on a Makita saw and I’ve got a fair few myself, but there is no other cordless saw like my DEWALT Flexvolt 7-1/4”! I’ve run it against my corded Skilsaw Mag77 and there is no comparison. If you need a powerful saw to rip old lumber or gang cut 4-by rafter tails, you want the sexy-flexy hanging on your horses! Love the channel and keep up the good work!

@Jason-uz8hj 4 жыл бұрын

Exact same comment here. My flexvolt rear handle has SIGNIFICANTLY more power than my mag77..........and no cord

@Jason-uz8hj 4 жыл бұрын

@h2s I've seen it. I could easily be convinced to by one. I've use the "77" series skilsaw for 20 years. Just recently switched to the dewalt 60v. I just cant stomach the cost at this moment. The dewalt is running real well

@andrewberzins752 4 жыл бұрын

Might make sense to compare it to the skilsaw, it's the original and cordless versions are available. Rear handle seems right for framing, less right for ripping boards down precisely.

@Will-pq7pj 4 жыл бұрын

Great review I wanted to know the difference in power ... Now I know

@coreyallan-audiovideo 25 күн бұрын

i think the ultimate conclusion is that we need both. I just picked up the 36v because of 2x12 stringers. in order to stay tight to my line I need lots of torque.

@davetaylor4741 4 жыл бұрын

I have the Dewalt rear handle saw. It too has grunt but not like my 30 plus year old Hitachi 9 1/4 electric saw. Also still getting used to blade on the left after so many years blade right.

@lucasmorrison4489 4 жыл бұрын

The dewalt rear handle saw Is a very good saw as well

@seaweed028 3 жыл бұрын

The 54v platform seems to outperform most other’s... I have a 7 1/4 54 V Dewalt And it’s phenomenal what that saw will do...

@jessejohnson1557 4 жыл бұрын

If you want a powerful dustless saw the festool hk85 does a mean cut on the rail and is dustless and has insane power !

@Stemlocksecurity 4 жыл бұрын

Makita 36v plunge saw is also a good bit of kit. I've found that one to be far better to use than Moët other brands

@nathanrochfortsmith 4 жыл бұрын

Hi Scott love your videos just wondering where you get your foldable saw benches from

@ziggiesaquaticexotics8270 4 жыл бұрын

It is good and yes I do need it lol I bought the kit and it came about a week ago and I’ve used it at least a half a dozen times already it’s sweeeet

@istvanmeissler2238 3 жыл бұрын

I wanted a cordless 7 1/4 circular saw. I wanted a smaller version of this saw but this saw was free from Makita, so I got it. I bought 2 5 amp hour batteries and a charger for 240.00 including tax and shipping and Makita sent me this saw and 2 additional 5 amp hour batteries as a bonus. So I have my 7 1/4 circular saw now. I hope I love it.

@gamezech2882 4 жыл бұрын

My 7 1/4 milwaukee can RIP 2by pretty good and it's super light and slim They also coming out with the best cordless framing nailer soon u should try it

@NameNaameNameeNaamee 4 жыл бұрын

02:16 It most likely turned off since you weren't doing anything. It can obviously sense that there is little to no load and there simply will be a timeout implemented.

@wolfgangselle4307 4 жыл бұрын

@Scott Brown ... I had this 36V Makita saw also but just for two years and during this time I’m used it just few times and I just sold it two months ago ... sometimes i need a deeper cutting saw and i like cordless tools. That’s why I want buy now a cordless saw that can even cut deeper ... Makita has a new cordless saw that can cut 9 1/4 “ but SkilSaw will bring one out here in North America later this year. This new cordless saw can cut even 1” more then the new Makita -

@dudewheresmyvape 4 жыл бұрын

Ok so I’ve been in the fence about getting this cause most of my cordless stuff is DeWalt and I needed a new circ saw and I hadn’t invested into the flexvolt lineup yet but after watching this I pulled the trigger today and bought it! 199.99 for the saw and 300ish in 2 sets of 5.0 batteries and a double bat fast charger! Used if this afternoon and I’m in love! Thank you.

@simonmiddleton4487 4 жыл бұрын

I got the dewalt 54v saw top handle and I love it

@SuperPhoReal 2 жыл бұрын

Damn. Good times to at nowadays. I got the same deal you got for $250 altogether plus a free xlock grinder. They’re having deals like Milwaukee now.

@GarwoodNick 4 жыл бұрын

If it's basically a cordless version of the hypoid mag saw, then it's amazing

@sterlinghearth3651 3 жыл бұрын

It is not.

@andrewacton5885 3 жыл бұрын

that 36v saw kicks ass. I'm coming from the baseline Makita plug in 7 1/4 saw. i bought the small blade 18v Makita saw in 09. my boss at the time told me it was a "gimmick". It became used more often than my drills. The next guy i worked for was a good friend, he realized the awesomeness of the 18v saw. we made fun of my old boss and I named this saw the Gimmie. so many years later I buy this 36v saw you're reviewing now. I named it the Super Gimmie. Ill go ahead and say you cant get a good idea on how powerful it is unless you're running 5.0 amp/hr batteries. Now you're looking at needing the double charger and at least 4 5.0 batteries. If you have that, you'll never want to plug in a 7 1/4 saw again and you wont look back. I was cutting rafters today, gave my employee the 36v for the plumb cut and i used the old plug in on the birds mouth end. Ugh, its been a while since I used this saw. Not as much fun. My only gripe is my 36v saw is the depth gauge is inaccurate and the spring in the blade guard is so stiff it'll push a 2x4 off the saw horses. I've been removing the thumb safety switches and the blade guard return spring on every battery saw since day 1. Once you get into the habit of the wrist flick to drop the guard before you place it down, you'll never want the spring again. plus brushless is already bladestop

@EastyUK 4 жыл бұрын

Been using the Makita XSH08Z (US name) Top handle 36v 6K rpm. Pretty nice piece of kit.. But the depth adjustment is very hit or miss. It's just a nut washer and lock ring that release a little pressure when you raise the handle to allow the depth to be reset. If that nut moves at all then it either jams or makes it so it doesn't lock. Makes me just leave it on max cut as I'm scared if I try to adjust it'll not lock out again. Makita have a great range of tools on their ecosystem so hopefully they revisit that mechanism for the future models and bring it up to standard.

@je-fq7ve 4 жыл бұрын

The 36v is a worm-drive saw. It has a different style of cutting than a 18v sidewinder. The wormdrive is a framers tool and most of the cutting is done "over the foot" using the weight of the tool to guide and make the cut. Add a prazi-beam cutter to the 36v and now you have a cordless beam cutter.

@burtonkidd 4 жыл бұрын

Another thing to keep in mind is the price of the blades. Where I'm from 6-1/2" blades are $10 more expensive then the 7-1/4" 🤔

@martinmcgowan89 4 жыл бұрын

went to America and so tempted to buy one :D big tools for big boys XD

@alexeychernenko2096 3 жыл бұрын

I suspect that "runtime test failure" occurred not because of overheating. First, the time was quite round. Second, the motor would not produce a lot of heat with no load. I think it just could be some kind of protection built-in in the saw's controller