Manual Swapping an IS300 Pt.5 - Wiring - ATEMU Install

Manual Swapping an IS300 Pt.5 - Wiring - ATEMU Install | W58 Swap EP. 22

Рет қаралды 4,321

Жыл бұрын

Link to diagrams, instructions, and my write up for a 2002-2005 IS300: drive.google.com/drive/folders/1bpG9T_3gArp8K2ej7FPcRyeNVKvfS_X0?usp=sharing
In this video, we continue the process of manual swapping Guillermo's IS300 with a W58 transmission. This video shows how to install an emulator onto a 2002-2005 IS300.
If you enjoyed, please subscribe as we will be uploading new videos weekly :).
Instagram: @Aimless.jp
Parts List:
Transmission - W58 (SC300) - Sourced Locally - Stock Shifter and Clutch Fork
Driveshaft - Xcessive Manufacturing
www.xcessivemanufacturing.com/is300-drivelines.html
Flywheel - Single Mass Sachs - Purchased from RockAuto
www.rockauto.com/en/moreinfo.php?pk=5607141&cc=1187580&pt=5348
Clutch Setup - Pressure Plate, Clutch Disc, Throwout Bearing, Pilot Bearing, Alignment Tool
www.amazon.com/EXEDY-16085-OEM-Replacement-Clutch/dp/B001B597D4
Clutch Master Cylinder - OEM
www.driftmotion.com/IS300-Clutch-Master-Cylinder-p/dm910.htm
Slave Cylinder - Luk - Purchased from RockAuto
www.rockauto.com/en/moreinfo.php?pk=4697352&cc=1187580&pt=2044&jsn=800
Clutch Line - Chase Bays
bit.ly/3ESs2H8
Flywheel Bolts - ARP (THESE ARE DIFFERENT FOR W58 AND W55)
www.driftmotion.com/ARP-1JZ-2JZ-Flywheel-Bolts-p/dm153.htm
Pressure Plate Bolts - ARP 103-2201
www.amazon.com/ARP-103-2201-Clutch-Pressure-Plate/dp/B00I5AQN6W
Rear Main Seal - OEM
www.driftmotion.com/1JZ-2JZ-Rear-Main-Seal-Toyota-p/dm12.htm
Transmission Crossmember - Xcessive
www.xcessivemanufacturing.com/sxe10-transmission-cross-member.html
Transmission Mount - Xcessive Urethane - Series 5
www.xcessivemanufacturing.com/urethane-trans-mounts.html
Pedals - OEM Clutch + Brake Pedals
www.driftmotion.com/IS300-Manual-Transmission-Pedal-Set-p/dm1482.htm
Transmission Tunnel Cover - Grannas Racing
www.grannasracing.com/products/auto-to-manual-transmission-swap-tunnel-cover-for-is300
Heat Shielding - DEI Floor and Tunnel Shield
www.amazon.com/gp/product/B000E243AW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Wiring - ATEMU Emulator + Resistors
quantum-auto.com/ols/products/immobilizer-and-remap-service
quantum-auto.com/ols/products/atemu-resistor-kit
Transmission Fluid - Redline MT-90 - 3 Quarts
www.amazon.com/Red-Line-50304-Transmission-Transaxle/dp/B000CPCBEQ?th=1

Пікірлер: 64

@lostfrost9136 7 ай бұрын

Bro please never delete this video I'm gonna Manual swap my is300 and I'm relying on this please🙏

@BladeStar420 Ай бұрын

I'm also doing a manual swap on my car this year. Thanks for the tutorial.

@migueltovar9702 4 ай бұрын

Bro you are bad azz super helpful videos. Dont ever delete this videos.

@maarkdp Жыл бұрын

Thanks for attaching those files in the description! Super clutch!

@AimlessJP Жыл бұрын

Oh kuya

@zackgreth7838 Жыл бұрын

I got the same one !! And dropped my trans yesterday perfect timing

@AimlessJP Жыл бұрын

Ay I’m glad to hear :)

@titusyang Жыл бұрын

Totally needed this!

@AimlessJP Жыл бұрын

@piraterick488 Жыл бұрын

awesome instructions on installing the atemu

@AimlessJP Жыл бұрын

Thanks!

@whatthe363 Жыл бұрын

Ive been waiting on this!!!!!!!!!

@AimlessJP Жыл бұрын

Sorry for the wait

@mikeycamacho8659 11 ай бұрын

Yo this is suuuuuuper helpful man thank you

@AimlessJP 11 ай бұрын

No problem!

@MrSpryte1 Жыл бұрын

nice job dylan you’re such an inspiration. i just hate that car and the owner of it!

@AimlessJP Жыл бұрын

Thank you I think

@Nimbus. 7 ай бұрын

hell yea

@zackgreth7838 Жыл бұрын

Bro Fucking perfect timing !!

@AimlessJP Жыл бұрын

🤍

@VegasAlex702 Жыл бұрын

Did you run the wire from the cluster to the ecu for the ecu speed signal? Without that, it won't set the smog monitors.

@AimlessJP Жыл бұрын

I ran it from the ecu, haven’t checked yet to see if the monitors set but if it didn’t then thanks for the tip!

@BenPetersMedia 4 ай бұрын

Does cruise control work with this method?

@Driftkid614 Ай бұрын

This is the same for 02-05 gs300 isn’t it?

@olegkulyak Жыл бұрын

Thank you for the detailed video. Can I ask where got that wiring diagram and definition table? I manual swapped my GS400 and having trouble finding a ecu pinout to complete the ATEMU install. Cheers!

@AimlessJP Жыл бұрын

Thank you! I actually found the pin out definition table linked in an IS300 FaceBook group and made the step-by-step instruction going back and forth referencing it. I found a manual for a GS400 and it has the pin out listed as a diagram and I believe it can be used to install the emulator since it does say the connector and pin you need. Here’s a link!: wilbo666.pbworks.com/w/file/fetch/141408114/Lexus%201999%20GS400%20GS300%20Electrical%20Wiring%20Diagram%20%28EWD356U%29.pdf It looks like it starts from page 116 and you can see that all the values are listed in diagram form such as +B being listed as connector E pin 16, SLT+ being listed as connector C pin 9, SLT- being listed as connector C pin 15 and etc I hope this helps!

@olegkulyak Жыл бұрын

@@AimlessJP WOW Thank you so much! Really appreciate the help, I was putting off the install of the ATEMU due to lack of info on 1uzfe. Thank you again!

@AimlessJP Жыл бұрын

No Problem!

@racesmith9510 4 ай бұрын

Whats the difference doing it on a 01?

@itsreallytheo Жыл бұрын

I got a stand alone using a jumper cd009 swapping my car would I still need the atemu?

@AimlessJP Жыл бұрын

You do not :)

@Ad0ny Жыл бұрын

Did you leave the resistors exposed on the sink mount or did you make a custom casing for it ?

@AimlessJP Жыл бұрын

I actually left them exposed :/ I plan on showing the setup next time Guillermo and I make a video

@whatthe363 Жыл бұрын

Personally I never loved the idea of this because I question how reliable the system itself is. Plus the entire resistor thing is weird. But I belive ill be forced to do this because doing the Manual ECU route is just to expensive for me RN

@jacklack1818 Жыл бұрын

Send your ecu for a tune

@jacklack1818 Жыл бұрын

It’s reliable…

@AimlessJP Жыл бұрын

Yeah I wasn’t a fan of it either but after looking into both options. I realized even tho this requires splicing in wires that is is still a lot simpler since the keys don’t have to be programmed for the immobilizer. The cost being a lot cheaper was what made us do it at the end

@KOGKGaming Жыл бұрын

Question, on the emulator. Said it was on back order. How long did it take to receive the part?

@AimlessJP Жыл бұрын

Sorry to hear that it’s on backorder now :( When we got ours, it was still in stock and showed up in 3 days. I would email them and see when they estimate they would have them back before ordering though. I just quickly looked it up and it seems that the one on Quantum Autos website is on backorder but that one on serial nines website is still in stock if you wanted to go with that. They are pretty much the same just the outside casing looks different. Pin out and wire colors are exactly the same :)

@KOGKGaming Жыл бұрын

@@AimlessJP They will be back in stock July! Thanks for the reply btw!

@mangoop2397 9 ай бұрын

If you installed an ATEMU instead of getting a manual ecu, do you still need to give the auto ecu a speed signal from the cluster like you would need to do with a manual ecu to avoid the check engine light? I was gonna install a ATEMU because the guy who was selling me a manual ecu flaked but I'm a little sceptical because I want to avoid any CEL.

@AimlessJP 8 ай бұрын

As long as you wire it following the diagram, you don't have to do any additional wiring. The check engine light won't be on but the monitors for emissions will never set so the car won't be able to be emissions tested. The reason is because the ecu needs to car to detect a certain speed for an extended period of time but the emulator messes with that signal. I've heard of people giving the emulator an additional speed signal to get the monitors to set for emissions testing but it is not a permanent solution as you have to keep the rpms low. If you want to pass emissions, get a manual ecu but if you just want the car to run perfectly without any check engine lights then an emulator is fine. Hope this helps!

@yoitsnestor4671 3 ай бұрын

@@AimlessJP so just getting the manual ECU would fix the "CEL, monitors to set for smog" right?

@KevinPerez-hl8pl 2 ай бұрын

Broo could you please let me know where I could possibly find more information regarding the additional speed signal on the emulator?

@alipipa Жыл бұрын

Yay no check engine light!!

@AimlessJP Жыл бұрын

It actually came up a little after this but it was for a bad thermostat :/

@d3an... Жыл бұрын

Please update if you pass CA smog

@AimlessJP Жыл бұрын

Unfortunately it does not since the emulator never lets the monitors set and it stays pending :( There is a work around if you wire a speed wire into it but you can’t go over a certain rpm or speed and have to drive it like that till they set then smog it and hope you didn’t go over while driving and waiting for the monitors to be ready then revert. It’s a pain and honestly not worth the hassle unless you really need to smog it that way.

@jaydengarcia389 10 ай бұрын

Hey thanks for the step by step guide. I followed everything and it was all good however 2 out of the 3 resistors are not working and no power is going to them. Do you know what can fix this?

@AimlessJP 10 ай бұрын

That’s strange. What did you use to tap into the wires? I know some wire taps are not the best and have bad contacts

@jaydengarcia389 10 ай бұрын

@@AimlessJP i used solder. But i checked before my connection and no power is coming from the ecu to the wire. It’s only reading 0.01 Volts. the one working is reading around 12

@AimlessJP 10 ай бұрын

Which two pairs aren’t getting power and which pair is? SLT+/- , SLU+/- , SLN+/-

@jaydengarcia389 10 ай бұрын

SLU +/- and SLN +/- are not getting power

@jaydengarcia389 10 ай бұрын

@@AimlessJPSLT +/- is the only one getting power

@spachuladgaming651 Жыл бұрын

wait does it delete every single check engine light or just for the tranny

@AimlessJP Жыл бұрын

It only prevents transmission related codes from popping up but not engine codes

@erase4090 Жыл бұрын

What wheels are those?

@AimlessJP Жыл бұрын

Advan Model 6s :)

@GusBigD 6 ай бұрын

2001 ? Do u have pin layout?

@AimlessJP 6 ай бұрын

I have the 2001 pin out linked along with the 2002+ but I didn’t make a step by step for it :/ I did show how to read it and match it pretty easily tho!

@essinnocents7125 Жыл бұрын

So if I decide to go with the manual ecu is it just plug and play or do I need a key that goes with that ecu?

@AimlessJP Жыл бұрын

I believe if you are swapping to a manual ecu that you will also need the matching key for it since the ecu is immobilized. You can get around this by having the ecu converted to a non immobilized ecu or by simply swapping the internals of the key into your current key.