Manual Tire Changer Mod.

Рет қаралды 62,447

5 жыл бұрын

Started building the top part of the HF manual tire changer customization. Its an adjustable piece that will make it much easier to remove and install tires on the rims without damaging the rims in the process. I'll add another video once it's finished with a material list and some rough measurements.
Thanks for watching! Please like, subscribe and comment.
Remember, when you hear a noise late at night and you're laying in bed... that's just me... breaking into your house to eat your cookies.

Пікірлер: 93

@charredskeleton Жыл бұрын

You got a like for the gardening line. I love it!

@BruceLyeg Жыл бұрын

Thanks!

@justwrenchit9287 5 жыл бұрын

Modification is often useful, sometimes necessary. Good stuff Bruce, I'll be up for my tire change soom

@BruceLyeg 5 жыл бұрын

Let me know when you're on your way.

@MarkFox 5 жыл бұрын

Glad that adapter made it up to you, looks good too!

@BruceLyeg 5 жыл бұрын

Thanks again Mark. It's very much appreciated and as I said, if there's ever anything I can do for you, just let me know.

@EatTravelHappy 5 жыл бұрын

Awesome job my friend. Can't wait for the next video. Have a great week.

@BruceLyeg 5 жыл бұрын

Thanks! You have a great week too

@CreepyCorners 5 жыл бұрын

Looks like you did a ton of work! Well done and innovative :~)

@BruceLyeg 5 жыл бұрын

Thanks!

@TheCowgirlNiamh 5 жыл бұрын

Looking good Bruce! "A hole on top for easy access..." You think of everything buddy! 👍😂😂😂

@BruceLyeg 5 жыл бұрын

Thanks Niamh. Hahahaha I knew when I said that someone would say something lol

@nighttrain022 Жыл бұрын

Bruce,. "You had me at hello". I mean , " had me" at " grew them in the garden". Tooooooo Funny!!! Now to watch your clip.

@AntonioClaudioMichael 5 жыл бұрын

Great video Bruce

@BruceLyeg 5 жыл бұрын

Thanks my friend.

@joeroyalgarage7995 5 жыл бұрын

Looks like quite the contraption there. Can’t wait to watch it peel a tire

@BruceLyeg 5 жыл бұрын

Thanks Joe. I'm eager to try it out.

@youuu4307 2 жыл бұрын

Great job man👍 thank you

@BruceLyeg 2 жыл бұрын

Thanks! Have a great day

@MusicWorldKaraoke 5 жыл бұрын

Hi Bruce my friend! Great video! Greetings

@BruceLyeg 5 жыл бұрын

Thanks Marc.

@joshuaklingensmith7843 4 жыл бұрын

I got all my steel cut and laid out to be ground and welded. Thanks Bruce

@BruceLyeg 4 жыл бұрын

Awesome Joshua. Hope it all goes together smoothly for you. Let me know how it turns out or if you have any questions.

@joshuaklingensmith7843 4 жыл бұрын

@@BruceLyeg I'll definitely let you know Bruce. Thanks

@rickiet805 3 жыл бұрын

Joshua klingensmith do you have your measurements of yours. Like the thickness of the round and square tubing. And the outside and inside measurements too. Not the length. I have that. Thanks

@joshuaklingensmith7843 3 жыл бұрын

@@rickiet805 not off hand unfortunately I had to move because of a divorce

@rickiet805 3 жыл бұрын

@@joshuaklingensmith7843 not good. It happened to me three years ago. Better now.

@bdogjr7779 5 жыл бұрын

Awesome Bruce《☆》Good plan brother. If it works as good as we think it will :*: hmmm bizness venture :*: Happy Sunday here before memorial day on Monday 🤠☻🤠

@BruceLyeg 5 жыл бұрын

I've thought about selling them locally but there wouldn't be much money in it for me. It takes awhile to build. Hope you're having a great long weekend. Our long weekend was last week.

@GrampiesWorkshop 5 жыл бұрын

How's she goin'? Looks like a great idea for the tire changer. Looking forward to the next episode!!! Take care!!

@BruceLyeg 5 жыл бұрын

Hey Mike. I just finished it and uploaded a video. Have a great week

@rickiet805 3 жыл бұрын

Do you still have the invoice with the size of the square tubing and the thickness. And round tubing and the thickness. If so can you take a picture of the invoice to see the sizes. Please if you can. My metal shop needs the outside and the inside measurements plus the thickness of the round and square stock to order it. Thanks Rick

@joshuaklingensmith7843 3 жыл бұрын

I do remember now my stuff was .250 thousands thick. I wouldn't go any thinner than that.

@AntonioClaudioMichael 5 жыл бұрын

Nice mod

@BruceLyeg 5 жыл бұрын

Thanks Antonio

@RANDALLOLOGY 5 жыл бұрын

Stay tuned for the next episode of Bruce L taking Harbor Freight tools to the next level, cause we're gettin old and tire changin is a devil.

@BruceLyeg 5 жыл бұрын

Definitely getting older. Hopefully this makes tire changing less of a daunting task.

@allenmckinney9533 4 жыл бұрын

I got a chevy s10 growing in my front yard. I'm waiting for the motor to ripen so I can pick it.

@BruceLyeg 4 жыл бұрын

Don't leave it in the ground too long, it'll turn into a 1/2 ton

@carlosavila6157 4 жыл бұрын

Great job!, Bruce. Can you provide the length, thickness/gauge, and type of steel that you used in your project? Thanks.

@BruceLyeg 4 жыл бұрын

Hey Carlos. I posted a video talking about the materials I used to build it with here kzfaq.info/get/bejne/pNOIich9xtO2l4k.html If you have any other questions, just let me know.

@jfisher342 4 жыл бұрын

Nice design. I was thinking of doing something similar to my HF tire changer. How are you spinning your mod around the tire when it often takes a lot of force to put a new tire on? where are you getting your leverage when you don't have the arm sticking out of the other side of your pivoting point?

@BruceLyeg 4 жыл бұрын

I still use the bar that came with the tire changer to turn the attachment around. It doesn't really take too much force as long as you use a good tire lube. It takes a lot less force with the tire duck than using the tire bar alone.

@builtrodewreckedit 5 жыл бұрын

we have tire stores in USA and they have monkeys that will over tighten your lug nuts and scratch your rims up for a little extra charge.

@BruceLyeg 5 жыл бұрын

Hey! We have the same monkeys here! Some of them work at lube shops and strip your drain bolt too!

@johngibson3594 5 жыл бұрын

Can’t wait to see this done what stops or limits the size tires yo can remove is it the size of the bar and the pivot point?

@BruceLyeg 5 жыл бұрын

Hey John. Good question. I've only ever seen similar modifications do up to a 22" tire. I don't see why it couldn't do larger as long as it isn't a low profile tire with a stiff sidewall.

@mostlymoparih5682 5 жыл бұрын

Okay I'm ready. Let's see ya change a tire on an Al lou minnie um wheel.

@BruceLyeg 5 жыл бұрын

You'll be the first to see it. The part that touches the wheel is nylon, so it should be damage free

@tysprojects2571 4 жыл бұрын

I won't even get into the 6 inch pipe jokes..... Haha

@BruceLyeg 4 жыл бұрын

Hahahahaha

@Afuw41 3 жыл бұрын

Bruce where can I get tubing and pipe cuz Home Depot don’t carry them with the thinkness

@BruceLyeg 3 жыл бұрын

I bought it at a place called Metal Supermarkets

@SteveRobReviews 5 жыл бұрын

Hybrid steel you have growing eh :) Looks like my kinda build Bruce 👍

@BruceLyeg 5 жыл бұрын

I'm quite the gardener!

@GeorgeJFW 5 жыл бұрын

🤙

@BruceLyeg 5 жыл бұрын

Thanks!

@rafaelreyes4251 4 жыл бұрын

good job, you could pass the measurements of the thickness of the bars you used thanks.

@BruceLyeg 4 жыл бұрын

I don't have anything written down, I just designed it as I built it. Here's a video that explains it a little better kzfaq.info/get/bejne/pNOIich9xtO2l4k.html

@rafaelreyes4251 4 жыл бұрын

@@BruceLyeg 👍

@MichaelJones1527 5 жыл бұрын

Should have used 10-10-10. I think the soil had too much iron in it. LOL

@BruceLyeg 5 жыл бұрын

hahahahaha

@king49334 4 жыл бұрын

Just wrap it with electric tape and lube very good

@job38four10 4 жыл бұрын

But where does that duck thing come from, no one mentions that..........

@raymondlong99 4 жыл бұрын

Mainly ebay, lots of different type on there

@IanYGath 5 жыл бұрын

It looks like it’s all coming together nicely. Look out Kal Tire, Bruce L is in town.lol 👍🏻👍🏻🙂

@BruceLyeg 5 жыл бұрын

Thanks Ian. I don't think Kal Tire has much to worry about.

@IanYGath 5 жыл бұрын

Bruce L. From humble beginnings ........... 😉

@MultiChaga 4 жыл бұрын

Ever thought about fixing your camera somewhere so we could get more details?

@BruceLyeg 4 жыл бұрын

I did a whole video on the details.

@cliffanator 4 жыл бұрын

wat is the red thing called and where did u get it?

@BruceLyeg 4 жыл бұрын

It's called a "Tire Duck". You can get them on Amazon or eBay. They cost around $15

@cliffanator 4 жыл бұрын

@@BruceLyeg cool ty

@khansajid823 3 жыл бұрын

Hi do you have any contact for mark cause I need this silver cone thanks

@BruceLyeg 3 жыл бұрын

lucidautowerks.com/collections/ultimate-manual-tire-changer/products/manual-tire-changer-billet-aluminum-centering-cone

@vegas11t Жыл бұрын

Looked at several examples: I'm sure I'll 3D print the cone rather than turn it, duckbill ordered.

@BruceLyeg Жыл бұрын

Let me know how well the printed cone works. I have a 3D printer and never even thought to try printing the cone.

@andybatchelor3321 2 жыл бұрын

Do you make and sell these if so let me know thank you

@BruceLyeg 2 жыл бұрын

Hey Andy. I don't sell them. The shipping would make it too expensive for most people to consider.

@RaysLaughsAndLyrics Жыл бұрын

Lucid Autowerks sells parts, kits and several designs and price ranges for this design.

@BuiltOverBot 5 жыл бұрын

he must charge extra for that part due to Canadians having a reputation for being hard to deal with in the states LOL

@BruceLyeg 5 жыл бұрын

Hahahahaha I was just telling someone about dealing with Americans here in Canada lol

@thomashorn9152 2 жыл бұрын

Nice job you have there.how much would you charge me , for making one I would gladly pay you .

@BruceLyeg 2 жыл бұрын

Hey Thomas. The problem isn't the cost of making it, the issue is shipping. It's pretty heavy and I'm in Canada. Shipping would be well over $100 anywhere in Canada and like double to the USA

@thomashorn9152 2 жыл бұрын

@@BruceLyeg Thank you for getting back to me 👍