I think this is the best video of explaining hopup buckings I´ve ever seen. Congratulations

Nice informative video. But that smacking of lips made me not wanna watch another of you videos, I'm sorry

This video helped so much, I didn’t understand how hop up system worked all I knew was that the bucking hits the B.B. and gives it spin. Now I know everything I need

here here on ML buckings!! I was told about these and stuck one (Macaron) in my L96 with the Omega nub and voila the inherent issue with L96 rifles shooting left went away, my fps increased and accuracy improved by 45%., i now recommend these to everyone having accuracy issues. Ive also installed these echo 1 psr's(autobots) with the AA hopup chamber and solved issues with accuracy and range. They, however, WILL NOT work in anything with a prowin hopup without modification. The shoulders of the bucking are too stiff and either the bucking or the prowin will have to be modified, else you will have feeding issues. As for the M700, AA just came out with a new hopup chamber for them in 2019 and the Ml's will work with the omega nubs using that chamber. Solved a lot of consistency issues with the M700. Lastly I disagree the 75's work great, the 80;s I also use and they work fine but you will see problems with air seal in a short time.All my guns shoot in excess of 400fps and dictate the use of these 2 buckings. ive never tried anything lower because I havent seen a need.

It would be great to have an video comparison (distances for example). Maple Leaf vs I dont know Modify tan ?

We are using Maple Leaf Autobot + ML concave nub + ML inner barrels in our WE GBB AKs and SVD, and the results are out of this world. Best precision combo ever. From my personal experience the Deltas are just decent while the Diamonds are awesome, as the latter provides extreme range. I prefer the new Autobot/Decepticon series for the included ABB ring, as it really grips the nozzle, something critical for GBB consistency. Might not be that necessary for bolt action snipers though. As for durability, I've seen no difference between the old and the new, it's just getting the correct hardness. The manufacture's guideline is pretty useful for that.

Thanks for the great explanation. It's very helpful to hear what the actual differences are rather than just people saying something is "good" or "bad".

Thanks for the video I've seen you on the sniper forums a ton and you're always very through with your explanations it's awesome.

hi sir.. how do you properly adjust the AAC hopup chamber? i dont understand the instruction that came with it.. adjust clockwise to correct high shots.. does it mean if my bbs are goin up and i want it to fly straight.. i need to adjust clockwise? and vise versa?

Good video! Thank you! - Question: ive byed several maple leaf buckings but everytime ive installed them the nozzle pushes the bb to far and the bb rolls out. What should i think about? i have a mb03 Well

First of all, fantastic video for beginners who don't fully understand how hop up works. Second, I installed a Maple Leaf Monster 50 (pale green) in my Evo today. I am assuming that it is a new design as the mound is not a simple triangle but more of a kite shape, it didn't come with a nub. I wasn't happy with how it looked using a standard nub. Fortunately I had a H nub (solid not squishy) in my box of bits so installed that, the results are amazing. I am getting around an extra 10 meters range and the accuracy has improved from a 7" grouping at 30 meters to a 4" grouping at 30 meters. I haven't been able to test it's maximum effective range yet as my garden isn't long enough. I will report back after bedding in and proper testing.

This is my exact setup! Always great results and a must for anyone that wants consistent shots :) Great vid

Im having an issue in my WE Scar H GBBR where the BBs are not feeding whilst using a standard WE nub and a maple leaf bucking. Would you say that the nub is probably the issue? Ive changed the hop unit and the nozzle is fine from what i can see Thanks, Ewan

what is the recommended length of hop window? does longer window and longer flat/r/s hop contact provides better accuracy and range?

I heard that the r hop is better than maple leaf from many people, but it seems like there are very few review about maple leaf vs flat hop. Which one performs better?

Sorry, a question: I have the original TM L96 Aws an search a alternativ bucking with 70 75 or 80°. But dont find anything. The Maple Leaf 75 dont fit because of the closed barrel window.

Great video! This will help beginners learn how hop up works.

I can use a maple leaf in a standard tm vsr-10 hop up with a type a dangererx right?

Which type of bucking will you recomend for better accuracy for gbb pistol (WE P226)...thank u

Hi, please can u help me i install the Diamond one with the nub but now i got to much hopup :/ i can cut the nub Maybe i dont know what to do

here's a possibly dumb question; so I've been eyeing ML buckings and nubs for a while, but I keep seeing "Maple Leaf MACARON hop up unit" and I don't understand what macaron means, and that qualifier that I don't understand keeps preventing me from making a purchase out of fear I don't understand fully what I'm buying. Could somebody clarify for me? I'm looking to install a maple leaf in my CYMA dragunov, an AEG. Thanks in advance.

I have a TIPPMANN M4 V2 AIRSOFT CARBINE (HPA). And i have inconsistent BB's when firing (Go left/right without a pattern). What setup will remedy this? And no i'm not replacing this rifle any time soon :-)

Good video very informative I learn a lot about hop up please do more videos about airsoft parts and how it works

I bought a brand new action Army chamber Action Army Barrel and Maple Leaf Autobot 70 degrees and I'm having bad inconsistency with my groupings with the Hop set to HPA .4's. Any suggestions like breaking in the hop up bucking?

What would you recommend for a WE GBBR 416/m4 flat hop combination?.. tx!

i tried a maple leaf super macron and it doesnt fit my barrel because those 2 extra bits. this was 60 degree in my cqb gun and i got low fps shots. it also did it on a prometheus purple

Relizu, what hardness would you recommend for the new 2021 Decepticon? Firing 2.4J with 0.48. Thanks

I ordered a 75 degree Maple Leaf Diamond monster bucking/hop up tension spring for my KWA VZ61. I think this bucking with a 160mm 6.01mm barrel on .30 bb's will get some distance.

First very informative video ! Question I have a gbb mk18 it’s WA based system and I upgraded my hop up chamber and inner barrel which is vsr no bridge but the hop up unit came with a Tokyo Marui rubber that looks like a maple leaf rubber just dimensions not the patch on the inside but basically it doesn’t have the extra material on the outside it completely smoothe but it’s definitely not an aeg rubber . I have a pdi W hold rubber I want to install but idk if it ok to remove that extra material so it will fit in the chamber . The fact that I have a vsr open window cut barrel I was under the assumption I could use the pdi without any modifications. I’m just curious if it is possible to remove that extra material on the outside so it smooth all the way around like the TM rubber that came with the unit ?? Any help is greatly appreciated

Hi, I know this is an old video, but it was very helpful, thank you! I had a question regarding the hardness of the bucking. You recommend 60°, but I think it could also depend on the power of the rifle. My airsoft field allows 3.5J snipers, so that's what I'm aiming at (no pun intended). Is 60° still gonna perform well and last more than a few shots?

trii ed a maple leaf super macron and it doesnt fit my barrel because those 2 extra bits. this was 60 degree in my cqb gun and i got low fps shots. it also did it on a prometheus purple. when i get the chance ill try a regular macron

IMHO it is _very_ tricky to get the older PDI hop-up units working just right. I still ended up with a right hook in an upgraded Maruzen Type 96 clone. You almost have to start all over again setting the unit up when you change BB weight. Having two hop adjustment arms _sounds_ great but it's a pain.

I have an AWS platform rifle (the well mb4403), the one with the bb-ramp from the mag to the hopup-chamber. Would i be able to install the AA-chamber on that rifle and then adjust the hop-up without taking the rifle apart? Because I can not reach the hop-chamber from the magwell.

Would you recommend a Pdi 6.05 303mm inner barrel, or the AA g-spec 300MM inner barel? i've heard of issues where the piston doesnt reach far enough into the hole of the AA hop up unit.

with this kind of high quality content, why don't you have more subscribers :S

So I have an Action Army Hop Chamber and the maple leaf bucking is about 1mm shorter and with it fitted is terrible so went back to the original VSR bucking and it's fine. I read somewhere that you have to put tape around the inner barrel where the AA chamber collar goes to push the bucking further in, did you have to do this ?

I just got a PDI 6.01 Barrel with the new 10MM diameter that avoids vibration. I was very excited about this hop you talk about until I arrived to the part where I should cut the end of the barrel's hopup window as it is not open. After speding a lot of money on the barrel, I am afraid I could break it. Whay solution would you recommend? Cutting the window as it is not that difficult? Or switching to another kind of hop-up?

really helpful video!, i just wonder, i'm using AEG DMR (long range AEG) 455 mm length and 6.02 pdi raven inner barrel. and currently my fps using 0.30 gram bb is 470fps. So, my question is, which one is better? mapple leaf monster 70 degree or prometheus purple bucking or even PDI w hold?? which one is better? i really hope that you will answer my question thank you! greetings from Indonesia!

Reliku (Now Relizu...) I use a VSR 10 and a AA Chamber w/ a 70degree autobot bucking (550fps) and a concave nub, however I still get shots curving to the right and left. I use a PDI cold steel barrel, however since I cut the bridge off, if the window is not perfectly straight and parallel could that cause issues as to curving?

Great explanation of buckings.

best explonation ever!tagged a few friends on facebook,so they can see and subsctibe.keep the good vids comming bro,and thanks!

Just finished up my R hop plus m nub barrel setup. If you cut a really long m Nub for flat hop it works surprisingly well. I Got a maybe 5 to 10% advantage from R hopping my gun over it( Currently over hopping to about 175 to 185 feet at roughly man sized spread. but part of my hop window is curved on the tight bore I was using making it Nigh impossible to cut a perfect patch. on top of it my patch material was slightly to thick. At this Point I think the stock GnG Hop unit is the only thing holding back the hop. So my current plan is to A buy another tightbore barrel this time with a different hop window, after that a better made hop unit. and after that try out maple leaf bucking settup to contrast and compare, past that its airseal in the guts of my gun witch I really dont like taking apart.

Great video really love the explanation

What maple leaf bucking will fit an m4 style hop up? I am buying a Krytac LVOA-c and have no idea what bucking I should get for it. I would like to mod it over to a dmr. (Maple Leaf AST Airsoft AEG Hopup Rubber Bucking - 80°) would this be good for my build?

A friend of mine just did this to his VFC HK417 GBBR and got insane performance.

I am thinking about buying an edgi tightbore 6.01mm for my jg bar 10. However it has a crown lip rather than the one shaped in your tutorial. I am also going to buy an action army hop up chamber.... do you think the maple leaf bucking and nub will fit on on the barrel with action army chamber

Good video man, thanks for explaining that !! very clear.

Excellent video!

great info, thanks Relizu!!!!!!!!!!!!

There's a brand name JJairsoft is it the same as AA?

I have the aac21(tac21) version of the m700 made by action army. I have installed a vsr orga magnus barrel and now am getting a diamond bucking for it(have now installed a king arms bucking as I had it laying about but this is antiquated tech by now...). But this version of the m700 comes with a cylinder shaped nub instead of a concave nub. What shoud I order for a nub now? Standard m700 nub? I don't feel like making my own nub as it will never be perfect... Thanks for your help/info!

Where can I buy this hop up chamber.

Is it possible to use these new maple leaf buckings (deception/autobot) with standard VSR barrel with that "bridge" at the end or is it the same design as the old Monster bucking that can be used only with no bridge barrels?

Hey! Is it true that 6.01mm inner diameter barrels are not a good choice for long range ? Thanks!

Great video man

I just bought a maple leaf monster 75 degree bucking for my WE M16. Do I need an exclusively maple leaf nub for it to work properly or will it be fine.

Hey I'm debating on action army Hop chamber or maple leaf chamber I already have the maple leaf hop arm with a 70° bucking and I have ordered a 6.03 AA inner-barrel what would you suggest is better ?!

I have had severe feed issues using these with my Cyma/FN/Cybergun P90. Upgrading the hop-up and barrel only made things worse. The bucking just sticks too far into the chamber, and blocks feeding. Really a shame, as they are a great design.

Dos It work on Ares ?

How can I be sure about am I inserted nub correctly in to the aa hop chamber? Can you make a video installation and also checking alligment correction ?

Nice all in one take dude

Hallo RelizuU zegt op het laatst dat de diamond buckings niet voor de aeg barrel word gemaakt. Nu ben ik al een tijd aan het upgraden met mijn type 96 en heel mijn setup is van action army. Ik zit nu met het conflict flat hop gebruikt en schiet bagger. Nu zie ik dat ze op skirmshop toch voor de aeg de diamond buckings maken, of zijn dit toch de delta's? En wat voor bb's met barrel wide gebruikt u? Verderest zijn je filmpjes echt top ga zo door man.Groetjes

Fantastic video, thank you! Is there anything I need to know for use with a TM Hi-Capa pistol?

HI, i have the silverback srs, and i wanted to upgrade the bucking and I have used maple leaf diamond for my vsr before, but not the maple leaf aeg buckings. Would 60 degree maple leaf aeg bucking be good to use. I have an aps m160 spring installed and thats around 520 fps. Also, do I need the concave maple leaf nub for the maple leaf aeg bucking to work, or will the standard silverback nub work?

Hey Relizu/Reliku ;p In the AA hop up chamber, do you need to mill out the window the nub goes through? It seems the nub is too wide for the small window the nub needs to go through.. a prometheus tensioner also didnt fit. And the original VSR10 nub just barely fits. The ML concave nub seems to be much wider then the original nub. Is the window of my AA chamber not as wide as yours or something?

I hope you were accurate in this video. I just pulled the trigger (HA!) on an Action Army hop-up, a 75 degree ML bucking and a ML omega concave nub. :-)

I'm using a maple leaf autobot hop rubber with a Action Army Hop unit, do I need to change the arm on the hop unit?

Hay I'm buying a pistol cause I use pistols for primary I just prefer it but it gives me a maple leaf option but it goes maple leaf autobot bucking 50degree 60degree 70degree 80degree which one should I get

Great vid. Thanks!

Great video

Very informative video thanks alot

(Edit Sorry For the Spam if you Got alot of Notification... had a weird youtube glitcfh where it posted my comment a million times) Just finished up my R hop plus m nub barrel setup. If you cut a really long m Nub for flat hop it works surprisingly well. I Got a maybe 5 to 10% advantage from R hopping my gun over it( Currently over hopping to about 175 to 185 feet at roughly man sized spread. but part of my hop window is curved on the tight bore I was using making it Nigh impossible to cut a perfect patch. on top of it my patch material was slightly to thick. At this Point I think the stock GnG Hop unit is the only thing holding back the hop. So my current plan is to A buy another tightbore barrel this time with a different hop window, after that a better made hop unit. and after that try out maple leaf bucking settup to contrast and compare, past that its airseal in the guts of my gun witch I really dont like taking apart.

Have you made a video about the new Super Macaron and Wonder bucking?

PDI-W hold from what I've seen are just as good as a flat hop. VSR-10 that is, I haven't tried the AEG design out because... gross, AEG's. The diamond Maple Leaf looks super promising though, I mostly came here to learn about the concave nub paired with the maple leaf. The faster wearing rubber likely grips better btw. Meaning less grip needed. PDI-W softer buckings grip way better than the harder ones and they do wear out faster.

Zeer interessante video. Ik ben zelf een VSR aan het opbouwen en ik vroeg mij af waar je een maple leaf nub kan vinden in Nederland? Ik kom zelf uit België, maar hier vind ik er niet direct eentje.

good video bro

I just got a 75 and i have almost no hop? Its installed right. But idk why. Do i need to break it in?

Thank you! this video really helped me a lot to understand how each of the buckings work and what the differences are. I want to switch the whole Hop up chamber of my VSR-10 to a new one which uses AEG barrels and buckings, but im unsure if i need a maple leaf nub for aeg maple leaf buckings, because the hop up unit has 2 seperate arms to adjust the hop up.

btw, the maple leaf arm doesn't have QC issues, it is purposely designed with oversized tabs that *must* be filed down to perfectly suit your chamber, as the VSR chambers tolerances (specially in the many, many clones) are all over the place.

Mooie video, kant en klaar uitleg ;-) ik gebruik ze ook

Sorry to multipost, I was commenting as I watched the video and read your post at ASF... The AEG buckings are Deltas and therefore not-so-good, but you missed the other option: for AEG use (and that includes the most popular L96s chambers) you can go with Maple Leaf Hybrid buckgins, which are Diamond buckings that fit in AEG chambers together with Maple Leaf GBB inner barrels. Haven't tried that option yet (I'm a GBB guy p) but theoretically it should work great.

thanks!

maple leaf ... best hop up buckings what i used ..

Can I use it with a flat hop nob?

Does the maple leaf delta system work with gbb pistols like kjw m9? And which is the best one for pistols? Here is a link to it: redwolfairsoft.com/item_detail/37153-Maple+Leaf+DELTA+System+Hop+Up+Rubber+60+Degree+for+Tokyo+Marui+%2F+WE+%2F+KJ+GBB+%26+VSR-10

Prommy barrels have pre made rhop patches. Saves the struggle

maple's buckings are good but they froze easily in cold weather.. -1C is too much for those

what you recommend for echo1 m28?

I was thinking on useing an action army chamber with the action army hop up buckling for my well mb01. I saw you on Airsoft sniper forums and would really like your opinion on this

very nice video :D

i bought that shit once it would not even keep my bbs in barrel when tilted to ground : not even with tighten at max hop up adjustment .....

where exactly can i get that nub for the bucking

You like the Joker? Similar speech pattern.

...or just use a maple leaf hopup arm that is basically a hopup arm that has the maple leaf nub pre installed\

Wow... such a big potential in this video with the detailed information and all the drawings, but made impossible to listen to, due to this constant lip smacking..... I don't think I've ever been annoyed by something in a video, but this is completely unbearable to listen.

You know your about to feel stupid when someone pulls out one of these pens

Mute it and put subtitles on.

Just don't use it with a prowin aeg chumber.. ProWin is to picky.

Couldn't watch it through. The smack sound before you start a new sentence was just to damn much. 😣