CNC Finale: Automatic Toolchanger Spindle Install & Testing
Рет қаралды 696,841
4 жыл бұрынSpindle Manufacturer: www.mechatron-gmbh.de/
Spindle Shop: www.spindel-shop.de/
4k Microscope (Banggood) bit.ly/2XWLehh
Servos in this machine:
All-In-One Servo: www.welectron.com/JMC-iHSV57-...
Haimer 3D Digital Taster: www.haimer.de/produkte/messge...
All-In-One Patreon: / marcoreps
The CNC journey is far from over, but this video is the last in the series of construction and components videos that I've made over the course of one year. In this finale we are looking back at a common Chinese 2.2 kW spindle and its VFD, .... does anybody want to write descriptions for me?
@reps 4 жыл бұрын
Happy Thanksgiving! Don't eat turkeys pls! Mechatron KZfaq channel: kzfaq.info/get/bejne/iOCYaduq1ZbUZKs.html
@mohammadr797 4 жыл бұрын
Happy to you, :) How much is the axis stepper motors holding torque?
@nicholasjacob3594 4 жыл бұрын
@@mohammadr797 they are not steppers they are 400waat servos he made a video about them here kzfaq.info/get/bejne/Z5uPpNyk0suwdGQ.html
@sfp4197 4 жыл бұрын
You need a hard project Try to make a metal 3d printer (DMLS,SLM,EBM,FDM either BJ) Try to do it cheaper an faster than me (1-2 years, 2000-5000€/$ buget) Good luck!
@mohammadr797 4 жыл бұрын
@@nicholasjacob3594 Thank you!
@sfp4197 4 жыл бұрын
I want more fiber and dangerous laser video
@buildthis2324 3 жыл бұрын
"Whoa whoa whoa, calm down dude." Lol. Glad Im not the only one who talks to their machines like that.
@AsymptoteInverse 3 жыл бұрын
I'm not nearly that polite with my machines... Now I feel bad.
@Evildandalo 4 жыл бұрын
“This video has been supported by Megatron” Your CNC is a deceptacon
@raymondbiskner6885 3 жыл бұрын
Oh thank god, it wasn't just me
@kurtbilinski1723 Жыл бұрын
A machinist once told me that the "mild steel" that we buy for projects is a melted mixture of all kinds of scrap steel, including ball bearings. Sometimes they don't quite melt completely, so you can indeed run into "nuggets" of really hard material within a block.
@Volt64bolt 10 ай бұрын
Never heard that before. I guess if it’s cheap stuff from China, but most graded mild steel has to conform to specific standards
@craigperry5662 5 ай бұрын
Sorry but I think that is complete and utter rubbish, even the crappiest of Chinese steel is better than that. The reason the tool got red hot is because it was spinning way to fast. The surface speed is critical to tool heating and therefore tool life. Spin it too fast and it will last but a little while then go red hot and then it rubbish.
@l3d-3dmaker58 4 жыл бұрын
please do a video about the telescoping covers, they're so cool!
@Conservator. 4 жыл бұрын
“So I’ll endure the chips today, ... and for the next four days as well, ... and whenever I want to wear this sweatshirt again” 🤣
@JlerchTampa 4 жыл бұрын
Carbon steel chips are pleasant compared to the nearly microscopic stainless steel versions! I have a one such example embedded in the arch of my left foot that randomly reminds me to wear proper PPE no matter how lazy I feel at the moment!
@Nathan-mg7ho 4 жыл бұрын
Ain't that the truth though...
@ChimeraActual 4 жыл бұрын
@@JlerchTampa Me too!
@1drelong 3 жыл бұрын
Hilarious!
@ddiva1973 4 жыл бұрын
Welcome to This Old Marco. Love it!
@Etna. 4 жыл бұрын
You mean Marco Gotteswinter? Great built btw! Regards, Etna.
@ddiva1973 4 жыл бұрын
@@Etna. well, i was actually gonna wright A'Marco79, but my finger slipped, multiple times.
@hyperhektor7733 4 жыл бұрын
he reminds me of this young tony ;D
@ddiva1973 4 жыл бұрын
@@hyperhektor7733 lol! Now we get to see where it all came from, and where it all started. But if Marco makes an April Fools vid about multimeters, I'm out of here!
@Etna. 4 жыл бұрын
@@hyperhektor7733 👍
@FesixGermany 4 жыл бұрын
Thumbs up for Mechatron. We bought an air cooled one from Mechatron and it works beautifully, when I hopefully build my own machine at home I will definitely get a Mechatron again.
@reps 4 жыл бұрын
You are partially responsible for all this 😉
@FesixGermany 4 жыл бұрын
Uh-oh.... I'm not sure if I can handle this much responsibility... Or yes I can: Mechatron FTW!
@pav9978 4 жыл бұрын
Du hast so übelst eine schraube Locker. Herrlich. Ich freue mich jedes mal wie schnitzel wenn du ein Video machst !
@backpropagated 4 жыл бұрын
7:48 WHAT??? YOU'RE TELLING ME THE BEARINGS IN YOUR SPINDLE HAVE THEIR OWN CLEAN ROOM?? God that's so smart, I love it.
@Nathan0A 4 жыл бұрын
Really happy for you getting this project up and running, and the results are awesome.
@MarionMakarewicz 4 жыл бұрын
Wow, Marco. I am so happy for you. You deserve all the goodies they throw at you. And what an amazing video. It doesn’t get any better than this in my book.
@rejidomus3013 4 жыл бұрын
Congrats on the successful build. Has to feel so good seeing your year long project turn out so well.
@frosty129 4 жыл бұрын
Amazing job Marco. Can't wait to see what you can make with this.
@sirstan808 4 жыл бұрын
That was thoroughly enjoyable Marco, thanks for the great entertaining video. And I learned something too.
@AsymptoteInverse 3 жыл бұрын
I especially appreciate how thoroughly you went through the construction of that spindle. That's quality hardware right there.
@Freetheworldnow 4 жыл бұрын
Your precision sharpened sense of humour has made this long video enjoyable!! Have fun in your projects!
@matthewpillay 4 жыл бұрын
Absolutely loved your sense of humor. Combines engineering with entertainment. Well done
@ashfaw 4 жыл бұрын
I'm happy that you have such "big boy" sponsors now You are appreciated
@mikej9062 3 жыл бұрын
I just wanted to say that this is perhaps my favorite video of yours because it inspires me to work hard with my CNC hobby so that one day I might also make a machine as nice as this.
@TDLmc 4 жыл бұрын
Never seen such a good DIY CNC video, just amazing!
@dschoas 3 жыл бұрын
This is so far the best machine video! I like the way you comment your progress. Reminds me on the first person Jerry Cotton detective stories I read when I was a teen. Well done!
@dotdump284 4 жыл бұрын
Good sense of humor and an awesome cnc machine. Such an intriguing combination.
@cgbillingsley6384 4 жыл бұрын
very impressive build, excellent video (I watched every second of it). You have a great sense of humor and your delivery makes this video one of the best I've seen. You, sir, are an artist !! Thank you.
@DudleyToolwright 4 жыл бұрын
Amazing work. I love the way this project turned out.
@Runoratsu 4 жыл бұрын
They're cheaper than I would have expected, honestly.
@fer662 4 жыл бұрын
I probably paid close to that for my chinese 2.2kw watercooled spindle taking shipping and the stupid customs tax of my country into account.
@Runoratsu 4 жыл бұрын
@noxxi knox More money than I can justify spendig on what would amount to being a toy for me, too, but I'd have guessed about double to triple the price they actually are.
@karsnoordhuis4351 4 жыл бұрын
@@Runoratsu isnt that this entire build? I would love to make one too but it would be very expensive for a toy
@Runoratsu 4 жыл бұрын
Kars Noordhuis …yes. Same. 😅
@michaelknight2342 4 жыл бұрын
How much does something like a Haas spindle cost, and what improvements would you get for the extra cash?
@nzpork1 4 жыл бұрын
Congratulations! All the hard work pays off, such a good feeling. You are an inspiration to us all.
@Th3Mafia 2 жыл бұрын
impressed with your precision and attention to absolute detail
@johnkelly7264 4 жыл бұрын
When I look through my subscribed list of new posts, yours is the first channel I go to! Always very easy to listen to. A funny and serious engineering channel, what more could you want?
@theodoregeldmacher8251 2 жыл бұрын
The envy I have for your machine is overwhelming. Incredible build.
@canonguy9448 4 жыл бұрын
Happy to see this beast making chips! Looking forward to seeing more 😁
@charlietripi 3 жыл бұрын
First video I've seen from you. Super cool! I love your editing, fun cuts, educational overlays of pertinent information, its really good work here.
@Dullwo 4 жыл бұрын
Awesome job! have fun with that thing! cant wait to see the tool changer!
@SPEAKERSRULEMYWORLD 4 жыл бұрын
really cool seeing this thing up and running
@en2oh 2 жыл бұрын
this is brilliant. Totally impractical for the average end user... but your techniques and the thought that goes into your projects is helpful for those of us who want to 'up our game'. Thanks again. Doug
@toddspeck9415 4 жыл бұрын
So impressed watching what you are doing! Dig your sense of humor.
@ArnaudMEURET 4 жыл бұрын
Intelligent exploration turned into knowledge sharing mixed with a fair amount of German humour. All this allowed by relevant high-quality product placement. What a wonderful time to be alive ! 🤘
@machine2747 4 жыл бұрын
Great job! You're an inspiration to the rest of struggling with our own cnc creations! Keep up the awesome content!
@CryoftheProphet 2 жыл бұрын
this man is my hero.. I could listen to him talk all day
@SAK_- 4 жыл бұрын
Richtig gut, ich mag deinen Humor und auch dein Umgang mit allem Maschinellem sehr! Es freut mich wirklich auch mal jemanden aus meinem Land zu sehen der so einen KZfaq Kanal hat! Hab bis jetzt immer nur Old-Tony geguckt aber du kommst direkt mit auf meine Maschinen-Liste :).
@roguetrooper70 4 жыл бұрын
SWEET RIDE!!! 🤘😎🤘 and Outstanding workmanship!!!
@nyceyes 4 жыл бұрын
Thank you for that holiday treat. *Happy Thanksgiving* from USA. 😊
@iteerrex8166 4 жыл бұрын
You machine is coming along every nicely. Thanks for sharing.
@Spirit532 4 жыл бұрын
That Tool reference did not go unnoticed! The Mechatron spindles are surprisingly affordable, and those ATC adapters... hnnng...
@reps 4 жыл бұрын
dude. what an all-rounder you are 🤯
@Spirit532 4 жыл бұрын
@@reps Why I'm rather fit, thank you very much. Don't forget to spiral out at the exit.
@jetaddict420 4 жыл бұрын
That was beautifully subtle
@bbogdanmircea 4 жыл бұрын
Best video ever about CNC on this channel
@KYBERWERK 4 жыл бұрын
The lateral forces of the 18:30 operation must be immense! That new tool really is awesome.
@Some_Beach 4 жыл бұрын
Never have I seen someone use a rake for packing peanuts. Guess that's what makes you the engineer and me the programmer
@hashemmehyar9614 4 жыл бұрын
Wow ! He had the PCB bits since May 2000, i admire his patience ! This video made me change my trousers, what a sexy machine, Congrats on your first chips :) and thank you, as always i learned a lot.
@cogentdynamics Жыл бұрын
I really enjoyed your video. I was chuckling the whole time, I like your humor! What you created is awesome but well beyond the scope of what I can do. It’s ok, I’ll watch.
@MGoat76 4 жыл бұрын
I just emailed Mechatron for a price quote and mentioned I heard about them on your channel. They should know their generous gift to you paid off. Thanks for the good video(s)
@littlehobbyshop 4 жыл бұрын
Congratulations on your beautiful machine
@Kiboz2000 4 жыл бұрын
Congratulations on yor work, that is one capable machine. Great video
@Paul-pl4vy 4 жыл бұрын
Congratulations. A fantastic achievement.
@DigitalisierungmitKopf 4 жыл бұрын
Finally a new Marco Reps Video 🤗
@bernardgreeff 4 жыл бұрын
Love it Marco! Well done!
@sergiourquijo4000 4 жыл бұрын
What a great channel. I dont want to think about the work it takes to do all that and on top of that film it and do a video. This is awesome
@LukeFrasera 4 жыл бұрын
Awesome video. Looking forward to the way covers.
@Boboo5 4 жыл бұрын
Good stuff dude! Loving the progress :D
@KillItandGrillIt 4 жыл бұрын
Great work I can not wait till you have it perfect.
@allthegearnoidea6752 3 жыл бұрын
You really did a beautiful job on this.
@NikoxD93 4 жыл бұрын
Awesome channel and humour! I just started working with metal to make a Torque Arm for my ebike, and this spiked my interest :)
@bobbynikolopoulos5720 4 жыл бұрын
just discovered this channel..... As soon as I saw the breathalyzer test part I immediately had to make sure I was subscribed
@phpn99 4 жыл бұрын
I'm totally addicted. you deserve 5M followers
@ElecDashTronDotOrg 4 жыл бұрын
Excellent video mate!
@ronwhittaker6317 4 жыл бұрын
cool video Marco
@remipast3347 Жыл бұрын
How nice of Megatron to support such a nice vid.
@mckidney1 4 жыл бұрын
Holy shit he did it. I started watching when this was a teaser in other videos :D
@PiperFishing 4 жыл бұрын
This has to be the most impressive CNC on youtube.
@shirothehero0609 4 жыл бұрын
Oh it's cool and up there with the best (spindle is awesome) but there are some seriously monster rad home builds on YT.
@NiHaoMike64 4 жыл бұрын
Close call between this one and AvE's. I would say this one wins on the DIY build aspect, while AvE's wins on using liquid spray to keep machining dust under control.
@abilalpk 4 жыл бұрын
A great video. Thanks for sharing. I was very much looking for it.
@olikrapi 4 жыл бұрын
Thanks for a good video and the humor
@ikocheratcr 4 жыл бұрын
Congrats on your new toy.
@MrFatjonable 4 жыл бұрын
Absolutely amazing!
@cncgeneral 4 жыл бұрын
Next challenge, build a surface roughness tester. You know you'd enjoy measuring sub micron deviations by dragging diamonds around.
@dimitar4y 4 жыл бұрын
What, just get a gramophone needle and a very sensitive high class amplifier? Hear it scratch like audio.
@theovannieuwenhuizen5756 4 жыл бұрын
Man...you are in another league! So much fun watching. Keep up the great adventures so we don't have to pay the price of making bad decisions. I do hope you'll set up a webserver where we can upload our cnc jobs ;-)
@rickhaass1133 4 жыл бұрын
Very cool Spindle.
@russlarson3241 2 жыл бұрын
Just love your videos, this is hobby cnc on steroids. Thank You
@Maaaaaax-07 3 жыл бұрын
This felt like a 4 min vid, damn, good job dude
@kaspereskildsen25 4 жыл бұрын
I know the suffer from aligning cnc machines, been a fixing and trimming Big cnc machines for over 3 years. Its a nice feeling to have it perfect straight in any axis, good luck and nice machine!
@bustedparts 4 жыл бұрын
Awesome! This is something that I would love to do!
@vincei4252 4 жыл бұрын
Nice job, Marco. Shocked at the incredibly reasonable price of that spindle!
@tolvtaggarn 4 жыл бұрын
You saw prices on spindles with manual tool change. Marco's spindle is equipped with automatic tool change and go for around 2000 euros if I'm not mistaking.
@gmack4097 4 жыл бұрын
Those prices are for the "Standard Series" spindles, not the "Professional Series" spindle demonstrated!
@ennybm 4 жыл бұрын
Beautiful ending!
@arnljotseem8794 4 жыл бұрын
Great video, and cool setup
@KylesMonitors 3 жыл бұрын
What an amazing build and that spindle system is awesome... I wish I could talk myself into buying one for my build.
@RoboCNCnl 4 жыл бұрын
Very interesting spindle !
@powelllp1002 4 жыл бұрын
Absolut perfekte Videos die Zeit vergeht wie im Flug beim zusehen!!
@jacoblloyd479 4 жыл бұрын
I just came across your channel. Love your voice! Great content.
@pakiw2 4 жыл бұрын
Im happy for you, finally first propper chips )))
@sealpiercing8476 4 жыл бұрын
I love modern cutting tool coatings for the variety of pretty colors, apart from and on top of their use to anyone.
@AppliedMetaphysician 4 жыл бұрын
Marco, I am always happy to receive & watch your videos; even if I have no particular interest in the subject matter. :) Ausgeseihnet!
@maor1993 4 жыл бұрын
that tool easter egg was epic!
@KarlMiller 4 жыл бұрын
Awesome stuff. Yes , please show more about the ways covers.
@Mimerneos 4 жыл бұрын
Yes, I want a separate video about those. I want a separate video about Anything and everything you do
@Eo_Tunun 4 жыл бұрын
Ich bebńeide Dich um diese Maschine. Großartige Leistung, sowas selbst zu bauen, Meister! :oD
@Alito103 4 жыл бұрын
Very cool video sir
@MrPDawes 4 жыл бұрын
Love the humour. Great video as usual. I wish I had the time and money to build one of these bad boys.
@nicolat815 4 жыл бұрын
Amazing piece of tech !!!
@FixDaily 4 жыл бұрын
If you freeze the bearing and heat up the holder you can put them together easily, since the bearing will contract and the holder will expand. WHen they get back to room temperature, they will be a perfect fit "impossible" to remove. PS: Your videos are always enjoyable and hilarious :) great work
@xenonram 4 жыл бұрын
Thanks Mechatron! I'll have to look into them. (Assuming they ship to the US.)
@nuthinbuttrubl89 4 жыл бұрын
This popped up as a recommended video, out of nowhere, I hear midi lateralus and a whole bunch of tool references. As the singer of a tool tribute band, i commend you 👏👏
@peterwalker5413 3 жыл бұрын
Funny as Hell! Best Eva! Keep it coming!
超人夫妇
Рет қаралды 17 МЛН
Sameer Gaming
Рет қаралды 6 МЛН