SKATEBOARD Bearings in a KICK PEDAL?

Рет қаралды 14,434

Күн бұрын

My first video tutorial!
I absolutely love my set of Tama Speed Cobra double pedals but lately they just haven't been themselves. Upon closer inspection, I noticed that there was some sort of obstruction preventing the slave side of the center shaft from moving smoothly inside the master side. When I pulled the pedal assembly apart to see what was going on, I discovered 2 completely shattered bearings and 1 other one on its way out.
After some research, I found out that skateboard wheel bearings are the same size as the bearings that a lot of popular hardware companies (Tama, Pearl etc.) use in their kick pedals so I went down to my local skate supply store and picked up a set.
This video documents my clumsy way through restoring this wonderful set of pedals to their former glory.
Music: bensound.com
Link to the bearings I used: www.kingpinstore.com/shake-ju...

Пікірлер: 64

@rzutyjenkin398 Жыл бұрын

6:02 - Regular WD-40 is hydrocarbon-based(mailnly naphta). It has nothing to do with water. WD - Water Displacement. According to wikipedia: '' _The spray, composed of various hydrocarbons, was originally designed to be used by Convair to protect the outer skin of the Atlas missile from rust and corrosion._ ''

@OlliVimpari 3 жыл бұрын

This video encouraged me to try changing bearings for my pedal. I have now changed bearings for Yamaha double pedal and also for old Iron Cobras. For Tama it was super easy beacause the bearings come of and go in easily. Thanks for making this video!

@ulisseslopez3738 8 ай бұрын

I have Iron Cobra 600s. The bearing for the left pedal needs a smaller replacement. Which ones did you use? Thanks

@glennrios9871 6 ай бұрын

I did this! It made all the difference in the world! Unfortunately I couldn't get one of the bearings on the slave off, but it wasn't in bad shape. So I left it on but I wish I could still replace it. 😢 Thank you for this upgrade.

@turtleelephant8884 2 жыл бұрын

For anyone with a DW 5000, they don’t take 608 skate bearings. They take 4 R6zz and 2 626zz. It would be wise to take the bearings out first and check what kind they are before purchasing new ones.

@cheddafaceboiii8252 2 жыл бұрын

I cant even get to the bearing on the slave side. The bolt holding it on is some mystery size

@Nichodemus_funkenstine 2 жыл бұрын

I was about to say this. I had a 3000 series years ago, and I used to put skate bearings in my pedals after a few years. You are correct though, the dw bearings are slightly larger. Causing a lot of radial play between the shaft and the housing…. I never knew the size though, thanks for that.

@JohnnyBobs3DDesignz Жыл бұрын

I think it is like that for my pdp's too I bet🤘😎

@kevinbothwell8425 10 ай бұрын

Is this the case on the very very early dw pedals too? From the post-Camco era I mean. Asking because I’m starting a pedal restoration business and I was hoping to rely on bones bearings as an upgrade option.

@dafi723 4 жыл бұрын

Great video, very helpful. Attempting this on my cobra today.

@karkarey 3 жыл бұрын

Thank you, I need to replace the bearings on my pearl demon drives and this was a good reference video.cheers

@informedcarpet 3 жыл бұрын

This was very helpful, thanks 🙏

@ArcticKoopa 4 жыл бұрын

Found you off your Davie504 video. Gotta say, good video, dude! I enjoyed it a lot.

@SaberStudiosSydney 4 жыл бұрын

Thank you! Much appreciated :) There will certainly be more fun times coming soon

@TobyTheThrasher 4 жыл бұрын

Nice Video dude!!

@JohnnyBobs3DDesignz Жыл бұрын

I think its because of the design, my pdp has the basic same mechanics and I had to replace the bearings as well, I also got the trick drums universal shaft and the bearing mounted spring tensioner mount's that clasp together and fit over that lil' bearing, I noticed you have em' too... People may not think those make much a difference I know I didn't before I got a pair, but... You can tell ;) Thanks for the vid, never knew that about skateboard bearing, awesome Brah! Stay Groovy Dude🤘😎

@DrummingChronicles 4 жыл бұрын

Great idea, thanks

@0071skateboard 4 жыл бұрын

This clip helped me. Thank you for your good information. Have a good day.

@SaberStudiosSydney 4 жыл бұрын

You're very welcome!

@0071skateboard 4 жыл бұрын

@@SaberStudiosSydney nice

@samradcliffe7841 4 жыл бұрын

What a gorgeous man. I hope he does more how-2 videos

@SaberStudiosSydney 4 жыл бұрын

I certainly hope I find time to keep making these, it was great fun

@tryharder249 4 жыл бұрын

Thanks dude!!

@ATMcrespo 3 жыл бұрын

GENIUS!!!!!!

@scoregeist 4 жыл бұрын

Great vid!

@SaberStudiosSydney 4 жыл бұрын

Thank you good sir!

@RIKDDY 2 жыл бұрын

Very useful for my Yamaha dragons

@MrE1981 Жыл бұрын

I hope you replaced all of the bearings on both pedals!

@anguse2068 3 жыл бұрын

I did this years ago… upgrading a Tama Camco pedal with high-end skate bearings. Just as an experiment for the hell of it really as there was no obvious wear in the original bearings. So not a huge change in this case but there was a slight improvement in speed/smoothness (visible as more back-front oscillations before stopping at the same spring tension).

@twincrows3362 8 ай бұрын

How do you remove the bearings of the camco pedal?

@EarthtonesCymbals 2 жыл бұрын

I was shocked at how loud the sound was when the old bearing was spinning. Please be advised: Hearing protection is required!!

@treatb09 4 жыл бұрын

get some bone swiss ceramics. or any bones bearings really. your pedal will never fail again. with other skate bearing companies, however, you should always lubricate them after opening.

@JohnnyBobs3DDesignz Жыл бұрын

thanks for the tip brother🤘😎

@SundayLiquid 11 ай бұрын

Put my tekton seismecs on my cobra, actuall half that half swiss. One side cant fit the tekton due to its special inner metal ring

@Strellock Жыл бұрын

Can anyone tell me what bearings I would need for a mapex falcon (pf1000) please? Thank you.

@vernon7896 Жыл бұрын

Were you not able to replace the right side bearing? I have 2 singles and don't know how to remove that black cap and the other end has a Allen screw at the end of the shaft that feels like it has loctite on it.

@jemdrum9653 3 жыл бұрын

Awesome video bro, also what size bearings are they? 7mm or 8mm?

@SaberStudiosSydney 3 жыл бұрын

Hey man, glad you enjoyed the video! I believe these are 8mm

@ulisseslopez3738 8 ай бұрын

Is this possible with Iron Cobra 600s? The factory bearing is too big for the pedal to follow through without resistance and grinding against the medal. Thanks in advance

@larrytate1657 3 жыл бұрын

My iron cobra only a year old and it has this squeak situation, oil/grease didn’t resolve it. Hope I don’t have a bad one in only one year. Somebody told me go with pearl cause their bearings are better but I liked the cobra feel. Maybe I have to do all this, a shame for only one year old,

@SaberStudiosSydney 3 жыл бұрын

Depending on where you purchased the pedals from, you should be eligible to have them repaired or replaced under warranty

@CaseyJust Жыл бұрын

Sorry for the late reply. I had a squeak problem with my Iron Cobra 900 double pedal too. I thought it was the main bearings or the bearings in the spring assembly and wasted a lot of time taking things apart. I traced the squeak to both of the U joints on the driveshaft. A little bit of oil, (make sure you move them around in their full range of motion to help the oil seep in) and it's dead silent. You can hold the drive shaft and the beater and twisting them opposite each other and hear the squeak in the U joints. Apologies if you were referring to a single pedal.

@brianwilson7928 7 ай бұрын

I wish the power glides were this easy

@DJBisGOD 11 ай бұрын

Question... Bearing-wise, is there any benefit from replacing brand new factory bearings with aftermarket skate bearings? I know that there is different bearing quality with skate bearings, so just wondering if for example high-end skate bearings would be any better than brand new ones that came from the drum factory. I'm using Tama Speed Cobra 910 Double Pedal.

@simonintihar 10 ай бұрын

i replaced mine on a 8 year old speed cobras which i didnt really use at all. the difference was noticeable and well worth the effort! get ceramic bearings, no need for big fancy companies, get the cheapest ceramics you can find and you're set! also check acd unlimited for available upgrades

@FunkyDrumm3r 4 ай бұрын

Have you encountered problems removing that plastic cap on the slave side? It seems mine is well tight.

@venteach.6289 3 жыл бұрын

Is the shim necessary? Can I instead replace it with another bearing?

@SaberStudiosSydney 3 жыл бұрын

I suppose you could, the shim is exactly the same dimensions as the bearing :)

@venteach.6289 3 жыл бұрын

@@SaberStudiosSydney thanks for the info! Im planning on replacing the bearings on my Yamaha pedal to make it smoother

@vernon7896 Жыл бұрын

Yes, I replaced the shim with another bearing on my Iron cobra

@skrawn1342 Жыл бұрын

Couldn't hear anything with the music playing

@menzulfian5267 Жыл бұрын

whay tipe bearing? shake junt abec7?

@cederickforsberg5840 3 жыл бұрын

Is this possible with Pearl Eliminators?

@Lemon_Drums_USA 2 жыл бұрын

It is, but one of the bearings on the double pedal is locked in permanently.

@JohnnyBobs3DDesignz Жыл бұрын

@@Lemon_Drums_USA really? Whoa dude, that bite a big one brah.. total suckage in that design. Did they design it like that purposely for failure and replacement cost I wonder?

@Jim00ionaire Жыл бұрын

FYI, I do not believe this is true. I was able to get all the bearings out of my 2001 Eliminator. Maybe the tiny screw was holding your bearings in and thought it was permanent? There is also a tight housing contributing to difficulty-but it can be done.

@thomastucker5686 Жыл бұрын

I don't think greasing the inside should be necessary as the outside bearings are not supposed to spin in that housing, at least I wouldn't think that's how it works. Sure, if your bearing seizes, that grease might keep it working?