Marine C18 Caterpillar CAM in the Pull Truck! It LOPES Big Time!

Рет қаралды 130,835

Жыл бұрын

Check out highwayandheavyparts.com
ALL MERCH MUST GO! All Blue Collar Shirts are priced down! Visit brucewilsonshop.com
Subscribe to my second channel! ‪@brucewilsontoo4879‬
Check out Clay’s Website! www.babbindustries.com
Be Sure to check out our supporters!
Fitzgerald Peterbilt for all of your BIG RIG needs! fitzgeraldpeterbilt.com/
Green APU for the best comfort in a big rig! greenapu.com/
Buy Truck Wheels buytruckwheels.com/
Diesel Auto Power for all of your Automotive diesel truck needs! www.dieselautopower.com
Truck Trailer Pro for your Truck and trailer supplies! www.trucktrailerpro.com
Renegade Products for your Vehicle Polishing and Detailing needs! www.renegadeproductsusa.com/
Lifetime Nut Covers!
lifetimenutcovers.com
NEW MERCH!!
brucewilsonshop.com/shop/
Sunglasses I wear!
glnk.io/n86p/bruce-d-wilson
Use code BRUCE10 at checkout!
Jump boxes
jbtools.sjv.io/brucewilson
Use code BRUCE15 for $15 off your next order of $150 or more!!!
Looking for equipment? Check out our website!
buyatractor.com
Follow us here!!
SNAPCHAT- bluecollarbruce
INSTAGRAM- bruce_d_wilson
FACEBOOK- BRUCE WILSON
Hit the like button and comment!!!
Fan Mail, Send Too
12410 US HWY 301
Dade City, Fl 33525

Пікірлер: 213

@heavyequipmentdude6615 Жыл бұрын

Finally getting back to good content back to old style Bruce Wilson actual mechanic work

@scrotiemcboogerballs1981 Жыл бұрын

Put washers behind the cap and spring to make it run higher spring pressure don’t stretch the spring

@HammerHead524 Жыл бұрын

I’m going to come out and build you guys some tables. Drives me nuts setting stuff on the ground.

@CATA20034 Жыл бұрын

It is normal with big nozzle to have erratic idle rpm. The pulse duration is hard to control as it dump allot of fuel, but under load all is good.

@nickhutton9756 Жыл бұрын

This is the kind of content that first got me into watching this channel. Would definitely like more!!!

@thomashagwood5050 Жыл бұрын

You should get KT3406 to build a second engine the kid knows his stuff

@Widenriley979 Жыл бұрын

Agreed

@Bruce_Wilson Жыл бұрын

Talked to him, he likes to stick around 800hp. I’m looking for 2500hp plus after this one let’s loose

@ryanhogan6509 Жыл бұрын

@@Bruce_Wilson Bruce just tell him, your building for a good time, not a long time., he too like to blow shit up..

@scratchingforthehellofit Жыл бұрын

@@ryanhogan6509 what he said

@cwb43068 Жыл бұрын

@@Bruce_Wilson Tell him your gonna treat it like a detroit and he will understand!

@blueonblack3971 Жыл бұрын

I enjoy the build videos, this is what made me come over to watch Bruce. Either way great videos , keep it up.

@juanquinones2597 2 ай бұрын

Hey great content and thank you for all the great entertainment you have given us thru the years. May God continue blessing and growing your blessings.

@coreyeubanks7866 Жыл бұрын

It sounded great at the pulls tonight! That idle lope is sick

@edwardstephens247 Жыл бұрын

Every team has that one guy that has an answer for everything! Right?

@robhighfield4699 Жыл бұрын

Great video Bruce, your back to your roots, loving the new content with pulling vehicles 👏👍

@abbey5788 Жыл бұрын

Lou at Highway and Heavy Parts always hooks it up!! Looks great

@ericgriffin397 Жыл бұрын

That thing sounds like a beast!!! Great job y'all!! Talk to Tim about his ECM guy.

@citizendick6087 Жыл бұрын

Sounds great!!

@johnrtrucker Жыл бұрын

Agreed, kt's channel awesome he's the kinda guy his dad gave him a cat motor to build rather than Legos he really does know his stuff

@FreightlinerFLD Жыл бұрын

Taxi gonna look sweet 🙂 Rolling up with the big tractor, semi the lawnmowers. Can't wait

@matthewshoudy7887 Жыл бұрын

I thought the C18 was the 1000hp and the C15 was the 800hp it’s been awhile since I worked on that boat sold it 7 years ago but it was always good to us!! Good luck Bruce!!

@biglsd1 Жыл бұрын

Fantastic video!! Sounds like Chitty Chitty Bang Bang, it's got heart n soul now!!

@benjaminstockton3917 Жыл бұрын

Good job Bruce sounds mean. Appreciate the channel buddy 👍

@rickyj2013 Жыл бұрын

Paint pen on the idler gear is always a clear sign that someone who had no idea what they were doing had their hands in that gear set.

@charlesroer972 Жыл бұрын

There’s a lot of things to do besides a cam change , coil bind , interference , spring pressures . Fuel pressure and delivery quality . When u change one thing , this changes everything .!!

@mikemorse8592 Жыл бұрын

The commonly available cams for these things the “800” and “1000” hp marine cams don’t change valve lift or profile from a run of the mill 3406e c15 cam. The only changes are to injector lobe profile

@vaughncowan4055 Жыл бұрын

I agree. I would have done a more in depth job.

@johnybravovlog7028 Жыл бұрын

Nice work boys

@LimaTangoZulu Жыл бұрын

That PCM: "baby I'm a ddIIIAAAAANNNNNOOOOOOSAAAUUUURRR

@toddclark332 Жыл бұрын

Hope it helps bud it should 👍🤪 can't wait to sit back in action

@jamesterry544 Жыл бұрын

Yessir ! So happy for what you are doing with your pulling stuff again. BADASS

@josht593 Жыл бұрын

Great content, you should look at the Bora Centipede Folding Workstands. I use them for work they are super light and all you need is a pc of plywood. Good luck pulling.

@wasterlid Жыл бұрын

That Kubota has a real Swedish metal frontloader 👍👌

@akabiga123 Жыл бұрын

7:43 that’s what she said 😂 shout out from Big A. From Cartersville Ga.

@lloydrobinson7081 Жыл бұрын

keep the clips coming

@Frank-sf1wh Жыл бұрын

I just did an out of frame with my c-15. Seriously considered going c-18 parts, but I think a eco would have been needed too. Since mine was good I didn’t bother with the extra expense.

@Frank-sf1wh Жыл бұрын

What I meant was ECM not eco

@Choochinc Жыл бұрын

I still don't buy that that's running right. I know proper fuel metering is really hard with large nozzles like that, but that sounds to me like a leaking valve or a badly spraying injector causing a skip. The fact that is doesn't start smoothing out until high rpm, even when it's being loaded up is what reinforces that opinion to me. Other pull rigs like this don't sound like that. They have a lope, but it's not a hard pop pop pop.

@richardphilp6560 Жыл бұрын

Yes, I reckon you should go for the long handle issue

@cedricbroussard8738 Жыл бұрын

Awesome 👌

@derektaulbee2360 Жыл бұрын

My every day truck has a marine cam and a couple other goodies. They really do wake these motors up.

@elim.2889 Жыл бұрын

"that was a mustang" LMAOOOOOOO

@rickybobby7285 Жыл бұрын

Adept ape should come help to the out of frame. I know there are lots of mechanics on KZfaq lol

@mikenano8046 Жыл бұрын

Adept ape is the real deal!!!!

@brandonruhl4525 Жыл бұрын

@@danielhofer7386 Lol clown

@Alejandro-vb2fx Жыл бұрын

@@brandonruhl4525 Stop riding Bruce’s dick, rest assured he doesn’t care what anyone says 😂

@leejohnson6173 Жыл бұрын

@@danielhofer7386 options are like assholes, let's see your stuff..

@TheFrank57 Жыл бұрын

The old pump sounds like a duck. It's duck hunting season ahahah

@wc6553 Жыл бұрын

Let Tim Gentry tune it for you. His "HOT TUNE" will get you 3 million horsepower!!🤣🤣🤣

@dangit4341 Жыл бұрын

Not 3 million, maybe a couple hunderd thousand.

@williamthigpen4480 Жыл бұрын

If not 4 million. It’s a beast!!!!!

@dangit4341 Жыл бұрын

@@williamthigpen4480 that go fund me is his beast now.

@williamthigpen4480 Жыл бұрын

@@dangit4341 I promise he is making money now. Hate he had the fire but boy is getting paid.

@Gentryandsons Жыл бұрын

@@dangit4341 give or take a hundred or two!!

@Trenton-om9qs Жыл бұрын

I am loving these videos along with the pulling content. Get that truck a good tune and it will be a ripper

@Seveneleven44 Жыл бұрын

We inherited a clapped out freightliner back in 2007 that was used to pull giant manure tanks around New York State…it had a worn out c18 in it and that thing was a pig even though it had a lot of hard use on it. I could pull a load of corrugated cardboard around at 70mph easily in the hills of Pennsylvania. Thing had guts down to 1000rpm….it also cost a fortune in fuel compared to everything else.

@ericdyer6223 Жыл бұрын

You guys have to much fun LoL at work I wish I could work for you

@farminggamer5784 Жыл бұрын

Gran video Mi like 👍👍👍

@vaughncowan4055 Жыл бұрын

They didn't change the Injectors or the cam gear seals.😅 This was truly a low budget job. It was fun to watch though. At least they got it to run.

@Oldskool4321 Жыл бұрын

Potentially floating valves in the future!!!

@stowaway475 Жыл бұрын

That's a nice raspberry tea

@nathanjones5653 Жыл бұрын

32:02 Bruce put down the twisted tea and walk away. That leads too bad things.

@KingTX2K Жыл бұрын

Sounds like a devil Love it 🤙🏻🤙🏻🤙🏻

@g.c.farmer5616 Жыл бұрын

Sounds like a old 2 cylinder Johnny popper at idle

@jamespimental6919 Жыл бұрын

Something ain't right since the injectors

@mitchelllong467 Жыл бұрын

Sounds like a dead cylinder

@ThanksHero Жыл бұрын

@@jamespimental6919 Everybody was saying he mismatched injector wires on that video and I dont think he ever fixed it lol

@treya2403 Жыл бұрын

I usually take a flat metal band like the style you get when you order something on a pallet then metal band, Bend it in a U shape sit in the valley under the CAM and as your Copilot is pushing the CAM in you can lift with that band drill a hole through the ends of it run a bar through it then you can easily lift it up

@sambryant5662 Жыл бұрын

You should have used a wrench when you adjusted the valves, that way once you adjusted the valve you could lock it down right away. That's the way I was taught to do it at Universal Technical Institute.

@nitrozack3062 Жыл бұрын

You should make a video with a cummins vs caterpillar

@kevinwiltshire2217 Жыл бұрын

That turbo

@brandonfloyd6321 Жыл бұрын

I was eating domino's watching this. 😂😂

@intothewinn7532 Жыл бұрын

You need a Pittsburg power system in it to tune that ECM.

@ALNunnery Жыл бұрын

Cleveland Tennessee Waivin a Hand ✋️

@belllpatrick Жыл бұрын

Awesome videos. It’s sure does sound like it has an exhaust valve staying closed for too long or is that popping noice just on the videos??

@doughamm5590 Жыл бұрын

Should take and make a base for the old cam and make something out of it. If you haven't already

@edreeder9853 7 ай бұрын

I've got the Marine cam in my C15, does not idle like that, in fact I don't see much difference in power, to do this right there is a lot involved besides the cam.

@B0RN2RACE100 Жыл бұрын

I’m loving this car content. I was wondering why no one had more of this, so much you can do to a cat with just oem cat pets from gensets and marine parts

@michaelshafer2996 Жыл бұрын

Cat c 15/18 is like the LS of the diesel world. Gensets are detuned while marine setups are really pushed since they have so much cooling

@edwardstephens247 Жыл бұрын

Sounds more beefy with the new cam

@ruxoneto6560 7 ай бұрын

Yes aftermarket parts usually don't have the quality of o.e.m parts !!

@jkdwayne Жыл бұрын

Look at Baldurs Control Systems , he has an ECU for Cat Pulling Engines.

@stowaway475 Жыл бұрын

Yea I watch him to and adapte channel too

@nelsonmattoon150 Жыл бұрын

Sounds better

@user-zo1os7cv7w Жыл бұрын

Welcome Mr. Bruce is a very powerful engine and I admire your work because you are a professional truck driver and mechanic

@snakebit96 Жыл бұрын

you need to take the ecm to the guy that Tim Gentry uses!!

@JASONH01 Жыл бұрын

Dillon looks like your brother. He needs to talk louder he talks so soft lol. Good job with the semi and getting the pulling tractor. I couldn't make it to the pull in ocala vip was sold out I don't go anywhere without vip access

@edwardstephens247 Жыл бұрын

Parts washer is the best.

@Dabaerr76 Жыл бұрын

Just a thought but wouldn't you figure out how to drive it down the track before you add all kinds of hp you don't know how to use? Just saying...

@Antiquefarmequipment Жыл бұрын

It ain't his first rodeo.

@nalley6815 Жыл бұрын

He’s not new to pulling lol

@luisrivera7748 Жыл бұрын

If you send the ecm up to Pennsylvania they can get you in the right direction

@raydangarrett6257 Жыл бұрын

U should do a parking lot tour

@howardt1317 Жыл бұрын

Great video Bruce love the truck pulling though try to get a few will it start in

@scottbennett3382 Жыл бұрын

did anyone else catch bruce farting when he picked up the cam???? Funny as hell!!!

@kingjames7273 8 ай бұрын

That was a short 😊

@kingjames7273 8 ай бұрын

Shart

@ryanhogan6509 Жыл бұрын

That’s what she said!! 😂

@FECosta-ei6pv 9 ай бұрын

Cat engines are the best ones engineers had ever made 👍🏻💪🏻

@Wingnut_Stickman Жыл бұрын

Pulse

@shanehaws3828 Жыл бұрын

Put a damn washer under the spring

@anthonycunningham5872 Жыл бұрын

Yo, Dillon

@bigtruckin1821 Жыл бұрын

Wd40 cleans cosmoline read goid

@Sk8boardw9 Жыл бұрын

Now get ya a good tune she be moving out nicely....need bring that thing up to north east ohio kunhle motorsports park

@sodbuster4296 Жыл бұрын

Class Act Peterbilt- shreve Ohio is hard to beat.Cyclone machine builds slot of cats.

@roweinnovation Жыл бұрын

That truck would run in the 4.1 but till it gets the proper tune. Just stay and fix ecm

@jamesgarner4352 Жыл бұрын

Are we ever gonna see content with the Dakota?

@ianatkinson8464 Жыл бұрын

😎👍

@calvinh.8882 Жыл бұрын

We can call that cam Viagra. It made that engine's beat really hard! lol.

@bigjlee2 Жыл бұрын

I was at the pull last night On Sat it sounded like it was pulling so much boost then just fell over on its face what happened?

@David.Rodriguez27 Жыл бұрын

Def had me cringing on the way he set the valves. Setting valves correctly is very important on getting it to run correctly.

@barrygrant1140 Жыл бұрын

What is the part number for that cam ? 10R-7155 ?

@chriswalshtv Жыл бұрын

Hey what’s up bro how are you

@scottnachtigal1616 Жыл бұрын

Hey Bruce you should have checked the cam gear lash after putting a new cam in. .001 .010 for lash good luck.

@scottnachtigal1616 Жыл бұрын

@Master Bates if that engine stays together I will be amazed. What a bunch of shit that was. Well he got all kinds of 💰

@Bruce_Wilson Жыл бұрын

We checked it.

@scottnachtigal1616 Жыл бұрын

@@Bruce_Wilson you check the cam gear lash with a ratchet. You didn't use a dial indicator. But the ratchet is close.

@Widenriley979 Жыл бұрын

Have KT3406E make a tune for that thing

@DieselAfterHours Жыл бұрын

It smells like straight up fart how u expect to work in these conditions 😂😂 had me dead 💀

@jcsully Жыл бұрын

I didn't see the cam gear get the timing marks aligned. Must have missed that.

@warrenmichael918 Жыл бұрын

you missed it, he showed it when he was putting the top gear back on.

@mvela1235 Жыл бұрын

That's what she said

@Jesse_Jessie_James Жыл бұрын

Ha ha ha that is how my KW sounds like. And i love watching people's reaction's. Cause they think there is a big block Chevy Motor in it. And i am like nope Customized Cam and other thing's in it which makes it sound like that.

@calebmcelmurry9593 Жыл бұрын

Make sure you grease your shaft before you put it in

@Michael-nu1py Жыл бұрын

WD-40 works best to take cosmaline off

@juanquinones2597 2 ай бұрын

Question ⁉️ maybe you can give me some info. 3406 b do you know the part number for a 800hp camshaft? Or is that even possible? Please and thank you for your help.

@peterschmidt2849 Жыл бұрын

❤️‍🔥🇺🇸🤙🏻

@MrAdrenalin17 Жыл бұрын

Any updates or vids on the free tractor that u guys had to split in half

@Antiquefarmequipment Жыл бұрын

Yea, been wondering what's going on with that

@Antiquefarmequipment Жыл бұрын

@@masterbates7016 projects aren't fast and simple. Especially when you have a life. Bruce is freakin running a business, trucking, getting his own projects and, AND trying to make youtube videos for us. And on top of all of that, he has a family.

@Bruce_Wilson Жыл бұрын

It’s running and driving. Didn’t get a chance to film the finished product

@mahatma171 Жыл бұрын

I feel like all that can be tuned out still I know it’s an old ECM but still… ask Lawrence, Tim’s guy. Better you can get it to evenly distribute fuel, the better…. Way better on the longevity of any engine