Keep doing exactly what you’re doing! This is well detailed and I really like how you play different music with great beats so we see how the speakers drivers react! You now have a new subscriber! Great videos!

🎉 great review. Definitely different. Pretty sure I won't be disassembling mine, but it was fun to watch. Thanks for posting.

This is what i've been searching... i'm in. Subscribed

Thank you showing this. Keep going

Well done! 👍👍👍

Very informative, thanks!

It's nice to see it's pretty straightforward to get into should I need to do some repairs or a battery swap.

It's an awesome speaker. I tend to grab it before my jbl flip and charge.

Oh hey! We have the same little swiss knife, mine is kinda old and run down, do you know where i could get one of them?

This IS a 360 degree design. The drivers fire left and right side, and you will listen to a lot of reflective sound, you do not face the driver, but rather the space in between. This is actually exactly the same design as UE boom 360 speakers. It actually provides far more stereo separation than two drivers facing forward.

I believe you can make that one box stereo. And if switch to mono, its just like any UE boom boxes, the back bounces off walls anyways.

Thanks for the video - wanted to "upgrade" but I think I will rather stick to my Denon Envaya DSB-200 - also not a big fan of drivers set on front and back

Very nice, good board electronic , what tipe ic use in this board.. thanky... bro..

Happy to see Sony Walkman 😍😍😍😍🤤

The best thing for such design would be a using of special, one-magnet-two-coil driver like in some high tech subwoofers.

Hi Shak do you repair Marshall speakers? If so how do I get in touch?

Very detailed, and this video just answered what I'd concerned about the unbalanced sound ( shift to the right ) when I sat in front of the emberton to listen. I'd do the stereo sound test too , found that front panel is left channel while the back was right channel which is a liittle bit different to your test. BTW, thx for the video!

Excellent tear down, brave man, in your opinion what is the repairability now that the somewhat serviceability has been established. What would be the first to go? Drivers? Battery? Possible drivers upgrade?

can you install a mini jack input ?

Which audio ic is used in it can you tell me plz

Buddy Al's good if you give the bord hd image attached in your videos it will be perfect 😍

Are you going to make Willen teardown video?

Btw that "star shaped bit" is called TORX (8)

Hola soy de peru y tengo un problema se daño la entrada de carga de mi parlante emberton como o donde lo puedo reparar ???

Donde puedo conseguir un speaker de repuesto? Ya que se rompio uno de mi bocina

saben donde puedo conseguir reemplazo de la bocinita de adentro?

Were did you find the battery?

Hi! Do anyone know where can i buy the power controller for emberton?

I don't know much in audio tech, i wonder why it use 7.4v instead of 3.7v like other brand in such small speaker, becuase i see only the bigger speaker is using 7.4v or 11.1v. even some big speaker still use low voltage but step up to higher voltage, sorry my bad english

This is 2 inch size speaker ?

Спасибо за обзор).

excellent video bro 😘😘

Thank you for such informative video. I have a question and hope that you can advise on that. I do not like bass at all (even bass from theatre grade speakers) as that triggers my panic attacks. I prefer no bass/strong vibration from any speakers. But it's really hard to find a good speaker with no bass. I have an Emberton and I love the vocals and many factors of it. However, the bass is still too strong for me. I would be very happy to know if you can tell me if there's any way I can remove the bass from it. I just want to listen to the vocals and I don't need any bass. I am not afraid to tear it down as it's no use to me with that bass. Thank you very much.

this Emberton is packed with 4 speakers WOW.👍, other bigger models like kilburn, action, ect. had only 1 driver, no good.

If you get distortion static from 1 bass speaker you have to tape the speaker from each corner firmly to dampen the annoying static vibration sound. A lot of bass loosens and destroyed the pliabilty of the bass speaker

What about the Bose / JBL ?

Do you know where to get same spec replacement speakers for the emberton?

it’s no mono I have it, the back one is right and the front is left, ur computer was outputting mono bluetooth audio then. It has a speaker on each side bc it’s a portable speaker, meant to be carried and listened by groups of people from more angles (mostly 360), and with left/right when placed near a wall, makes a bit of little surround sound with Marshall’s “stereophonic technology” with sound details bouncing off the wall. Setting my phone to mono loses that effect.

Where to buy in Hong Kong?

You are supposed to place it vertical, with the golden button facing you. Then it will surround from both sides to you.

Oh wow didn't know it was front and back firing drivers

Thank you, you just save me a lot of money, I didn’t realize the single driver on one side and The fake woofer on the other side configuration. I thought it had two full range drivers on the front and two radiators on the rear.

👍🏻✌🏼🇧🇷

I don't undertand why soundlink flex bass deeper in low vol and also louder in max vol, i bet soundlink driver is about 15w though it has few chip vs alot of chip in emberton and 20w driver. I prefer the the flex but disappointed bt4.2 I'm satisfied emberton circuit board, its batt life, design, and quality, but disappointed sound if compare to flex, in my country the price is the same, would you recommend emberton over soundlink flex, 🙏

Do you know how to solder an aux input to the bluetooth module?

Can you take the Marshall emblem off and put it on the other side thanks

do you know what went wrong, if all of sudden emberton doesnt produce any sound? neither the turn-on sound, neither the plugged-in sound.. neither bluetooth-connected sound... completely silent no matter what... out of nowhere this happened... i teardown, recconnect speakers and all, factor reset... nothing changed... Beside dead silent sound , everything else works... it charges, it connects to bluetooth, it turns on, just 0 sound no matter what ... .Did the speakers die? but then its weird that both die at same second...

My Marshall emberton just stopped working suddenly, it's like the sound only just cut off, everything works properly. It doesn't make sound even when it boots up anymore

Thank you for this video. I won't buy mono. I need stereo

Can you do a Sonos product teardown?

The battery is bigger rather than I expected.

I really liked the speaker. however, I didn't get it because of the way of the speaker emplacement

Olá 👋🏼. Acha que a Tronsmart T7 é mais potente do que essa Marshall? Obrigado.. 👍🏼

Teardown is clearly visible.

So, the question is: will U get a true stereo if U pair them…? 👀

to manny mono blue tooth speakers . all blue tooth speaker makers need to focus more on some stereo blue tooth speakers.

They did that because if they didn't do that the radiator there would only be one Radiator on the back

Realmente vale la pena?

В мене у самого аж руки затряслися після цього відео! Як її розбирать!) Но нечего жахливого тут не має! Просто сміливіше … взяв м‘яч- пиздяч!)))

It is a stereo speaker, not mono. I was hearing it so clear when tested it with my own Marshall Emberton, so there is left and right channel 💯% ... My hearing is very, very sensitive. I don't get it why they was not put the speakers like left and right channel on the front and one big radiator on the back, lol 😂 ... Why they call it 360°when there is not like 4 speakers on the different sides and example the radiator under the speaker. There is only half of that "360°" 😅 ...

Simply, the front of such speaker is where the button is.

Marshall claim the speaker is stereo, but it is a very weird speaker arrangement if it is.

This speaker layout is not good for stereo separation unlike bose soundlink mini ii or jbl flip 3 or 4.

hands like a surgeon....lol 😂 😂

I Dont By This Only Select In My Life Sony Product And Japan Technology

Jbl flip 6 or marshall emberton?

кароч какойто пам

I think the rear facing driver is meant for bouncing sound off wall.

Индикатор батарейки жрёт батарейку))

I already checked this guide and now I know a fake speaker I bought....my skull candy sound much better that the Marshall emberton fake...I am returning it for a full refund

Better to buy Charge 5

Mine is broken, crackling noise coming out of it . Will not buy this speaker again.

Menos mal que no me lo compré !!! no es estereo !!! :-(

I tried to get past the terrible choice of music...but could not... try something less jarring like Steely Dan...

I Think All Product In Worlds Only Chinese 🤪🤣😂😀😆😅😛 I Am Right