Custom Window Insert Vent Kit - for Exhaust Venting and Portable AC

Рет қаралды 54,445

3 жыл бұрын

I now sell these on my website: martinsonmanufacturing.com/
--------------WHAT I RECOMMEND FOR EVERY NEW GLOWFORGER---------------
Exhaust Port Extension:
amzn.to/36l7kmg
6" AC Infinity Inline Fan: (makes your Glowforge super quiet)
amzn.to/3d5sPGW
Leak-Free Reducers for above fan:
(2 Pack): amzn.to/3tAkOTR
Leak-Free 4" Exhaust Hose: amzn.to/31j7HYo
OR
4" Window Exhaust Vent Adapter:
amzn.to/3uvEt6y
---------------------------6" EXHAUST HOSE ACCESSORIES----------------------------
6" Exhaust Adapter:
amzn.to/3qWaowf
Leak Free 6" Exhaust Hose:
amzn.to/3lOxVLL
Martinson Manufacturing participates in the Amazon associates program

Пікірлер: 51

@adrianamedeiros1288 3 жыл бұрын

Lifesaver! Was worried what management would say if they notice but I think this will discrete enough that they won’t even know.

@aberodriguez4149 Ай бұрын

This is a great video it provides an appealing visual look and will keep my wife happy and I will be able to vent 3D printing fumes out. Thank you for sharing this information.

@jessicascott5611 3 жыл бұрын

I needed this! Thank you! YES! I know what I'm making today. :D

@artistrobfuller 3 жыл бұрын

Top man! Just got my GF+ so this will be handy for a newbie like me!

@hugssoftanimals3489 Жыл бұрын

He totally sounded like agent Smith a couple of times during that. Like his duct work as well.

@earlcoobs3756 Жыл бұрын

I just purchased an Eco Flow 2 portable air conditioner and heater I need something that my two vent hoses to go through. I used part of a breezeway vent and created my own . I have a 2003 379 Peterbilt. Thanks.

@jp554731 7 ай бұрын

2:20 had me rofl 🤣 “2 inches seems to be sturdy enough for me.”

@jgrimm1055 2 жыл бұрын

I need this!!! Can you make them in 10in? I’ve been searching for something like this for a while!

@arthurh1969 2 жыл бұрын

Oh wow I could use one of these with a hood to move my stove to the window. I have a really tiny apartment.

@zenastronomy 12 күн бұрын

what kind of worker should i hire to install a vented hood? i need the hood to be vented through a double glazed window in kitchen. so i think I'll need some kind of glass worker. but i don't know what qualification worker i should look for?

@mgar7186 11 ай бұрын

Can you make these with an 8 inch exhaust hole

@jrm637 3 жыл бұрын

I purchased your adapter and I now have my acrylic sheet with the 4” hole. Do you have any recommendations for the glue to secure the adapter to the acrylic sheet?

@MartinsonManufacturing 3 жыл бұрын

There's glue out there specifically for acrylic that dries clear, but a good quality super glue will do the trick. Sometimes it's dries filmy white though so you might want to do a test spot first or just be careful if looks are important to you. But it will hold just fine.

@elxero2189 11 ай бұрын

Where to find the vent tube

@gabzwilson2750 2 жыл бұрын

YES! Just what I was looking for, I'm about to order the adapter but whats the diameter of the hole cut into the acrylic for the 4 inch ?

@MartinsonManufacturing 2 жыл бұрын

I cut the hole at exactly 4" I recently discovered this vent cover which I think is awesome and will also work with a 4" hole: www.amazon.com/gp/product/B08LPJT3NP/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1

@gabzwilson2750 2 жыл бұрын

@@MartinsonManufacturing this is awesome ,thanks ! I ordered your exhaust extension off Amazon with a 6" inline fan so I'll buy the 6" adapter and go with that size for venting. Thanks for your help! Awesome

@jgrimm1055 2 жыл бұрын

Hello! This is absolutely perfect! Do you make them for 10in ducts?

@MartinsonManufacturing 2 жыл бұрын

I don't but may consider. Is 10" ducting pretty rare? I see a lot of 4" and 6".

@jgrimm1055 2 жыл бұрын

Not for larger tents. You can get exhaust kits in 8in 10in and 12in.

@jesslinx Жыл бұрын

Where do you have your inline fan for your personal Glowforge setup? Do you have it hanging somewhere or sitting on a work surface?

@MartinsonManufacturing Жыл бұрын

I have a deep table and it sits behind the Glowforge.

@lisetteenriquez-velazquez9684 3 ай бұрын

How much are the ones you make

@brittanykirk5756 Жыл бұрын

Would this product work for replacing a glass pane in a basement window?

@MartinsonManufacturing Жыл бұрын

I don't see why it couldn't. I use 1/4" but you may need to use 1/8" because that's probably the thickness of the glass.

@patsyflores20 2 жыл бұрын

hi! i need a 4” for my window for a portable dryer who has a 4” hose can you send the link to order one from you?

@MartinsonManufacturing 2 жыл бұрын

Hi Patsy! Send me an email: joe@martinsonmanufacturing.com

@michaelisakov1108 2 жыл бұрын

Anything to make this weatherproof so it doesn't get drafty in the cold weather?

@MartinsonManufacturing 2 жыл бұрын

Yes, I would go to your hardware store and get some window weather stripping with an adhesive backing and put it on all four corners.

@ericiaarchie3685 3 жыл бұрын

Hi. Do you sell the acrylic window vent with the adapter?

@MartinsonManufacturing 3 жыл бұрын

Nope, just the plastic adapter.

@hottcoco21 2 жыл бұрын

What would you do for an out swing door?

@MartinsonManufacturing 2 жыл бұрын

For a crank out window you’ll need a piece the size of your window. Replace the screen with a piece of plexiglass.

@leodambrosio 3 жыл бұрын

Hey dude! Are these going to be available on Amazon again anytime soon?

@MartinsonManufacturing 3 жыл бұрын

Yes sir, hoping to be back in stock by early to mid August.

@leodambrosio 3 жыл бұрын

@@MartinsonManufacturing awesome, love to hear! Will def check back

@benchmarkcardbreaks3719 3 жыл бұрын

Hey man. If i give you dimensions would you make a custom window insert with 2 holes? Ill pay for the service.

@MartinsonManufacturing 3 жыл бұрын

Thanks for reaching out. We just had our first born and life's a bit crazy right now so I'll have to pass. Wish I could help you out. If you don't mind me asking, what do you need the two holes for? Don't you just need one?

@MartinsonManufacturing 3 жыл бұрын

My schedule is looking better for July, if you're still looking for an acrylic window insert let me know.

@klfrost7 3 жыл бұрын

Links on Amazon aren't all working

@MartinsonManufacturing 3 жыл бұрын

Thanks for the heads up. They should all be good now.

@jolIyjoeker 2 жыл бұрын

Did you say you sell these somewhere?? I want one, no I need one!

@MartinsonManufacturing 2 жыл бұрын

Are you referring to the entire window insert or just the white adapter? Are you using it to vent fumes with a laser cutter?

@jolIyjoeker 2 жыл бұрын

@@MartinsonManufacturing yessir the entire window insert, just for venting warm air outside.

@MartinsonManufacturing 2 жыл бұрын

Send me an email and let’s get you set up! Joe@martinsonmanufacturing@gmail.com

@MartinsonManufacturing 2 жыл бұрын

@@jolIyjoeker I goofed on my email address sorry. It's joe@martinsonmanufacturing.com

@moisted 8 ай бұрын

It is amazing how Americans operate with these idiotic unit of measures... 1/2, 5/8th... Why are you making things difficult for yourself for no reason, using units that some old British king pulled out of his pants 300 years ago ...