The wee one asking "Are you going to grease it?" was the best. Equipment maintenance learned young.

'Look mummy! Daddy's bought something that isn't broken!!!'

Forget the chipper, The David Brown is purring like a kitten and running great

Your sons enthusiasm reminds me of my baby brother, he’s sometimes eager to help out and loves tools and big machines

Loved the comic relief at the end with the sheep. Good video.

Hard to believe that Marty T bought a "new" piece of equipment. Wasn't there a vintage abandoned V-8 powered chipper somewhere, just begging for a new home? Lovely family Marty T...best to you mate.

Takes me back, one man, a lovely lady, and two wonderful little girls. The same as me many years past bringing pleasure to them. Enjoy it while it's there.

Ahhh the memories come flooding back!! RIP Rambro........

I love his videos when he shows the youngins, they are so cute, First time I have seen the wife in a video. Nice family Mr. T.

Had a ram like that once. Finally had to pick him up by the scruff of his back and body slam him! It took about 3 or 4 times and he was done! You'll still have to watch him around your wife and kids, though.

Next up, diced mutton stew recipe.

Here I am thinking Marty was about to break out , the welder , a big grinder , an old axle , and shed load of metal . 😋 . Excellent stuff Marty , good to see the family , and young angry ram again . You need some groin protection now fella . Keep up the excellent work and content . 😁😁😁 .

From Texas USA, love your channel Marty. Keep it up. Love your homestead

There always seems to be a ram in Marty's videos, mostly hydraulic but this time grass-fed!.

It was great to see your family at last, I was beginning to wonder if you lived on that mountain on your own. Had to smile when everyone started helping you unpack it. Your youngest looked like he had never seen somthing so shiny and new!

Fantastic machine, just love how excited little man was, that's why they're called boys toys, it don't matter how old you are, they are still great. The sheep was getting a bit angry with you, just goes to show how much damage they can do, most people here think they're harmless.

I used to throw a quart of water on the ram for a couple days then a squirter gun with water was enough

A great video. I loved the kids comments. You have a lovely family.

Never seen a kid MORE excited than the parent on new toy he had just bought...priceless.

Some tools or machines should be purchased new and a chipper is one, far to dangerous to have an old abused over heated shaft or cutter drum fly apart and ruin your day. Well done Marty I’m with you on this one

Nice comfy sunday and I could be doing some things. Instead i watch this comfy video and just let time pass by :)

i love how the kids enable you "so cool, so cool". theyre keepers, for sure.

The woodchopper is great, the sheep ram is determined to give you a good laugh and break a kneecap too.

Always good to see your family. Like to see your son helping dad out once in awhile.

First time seeing your family - that really brightened my day! So cute!

I bought the same chipper in response to an ad for a Canadian brand name model. It turned out to be a Chinese counterfeit (no serial number), but it uses the brand name parts and works well on my 21 hp Kubota.

Hi. I used a 20 inch chipper on a Sydney council for about 15 years. We used to call those little fellas “pencil sharpeners”. They can still tear you to bits if you take your eyes off them. Keep an eye out for stress cracks. Even our big Vermeer would split here and there. Great investment, mate.

The gleeful woodchipper dance. I do it often myself.

I appreciate you sir. Thank you for sharing your skills, knowledge, and experience. I was on a mini vacation about a week ago and as I was driving past a hops farm I noticed that they were selling the exact Ford tractor I've been wanting for decades. I have no need or space I just want it. Tractors are very interesting to me, I'm grateful for all of your videos about them. You are very good at troubleshooting and I learn something new from you quite often. Thank you and God bless you and your family

That sheep will be going in the chipper if he keeps that game up 🤣

I like how the family is involved . You have found someone great hired hands. Keep the videos going. God bless.

Cheers, Marty from USA. Thanks for sharing your adventures!

Boy that David Brown sure brings back memories! About 40 years ago I was boarding my horses at a farm that had a big DB. They used it mostly for haying. Sir David Brown made some beautiful roadsters too, even if not always the most reliable. Thanks for a memory!. Stay healthy. Cheers, Steve/Ohio/USA

Ah another working toy for dad to play with and it's nice to see the young people taking an interest in what dad's doing for the equipment

Worked the chipper for a tree crew for a couple years, you really dont wanna feed the chipper with your hands closed round the wood. Open hands or fists to suss jams and a second branch to feed the last of the first one.

“That’s Mum’s early Christmas present”. Mum looking somewhat less than gruntled!

You have a lovely family, Marty! God bless you all!

About 2 headbutts from the wooly rascal and I'd dispatch him to another dwelling place.

Nice bit of kit for future works, also nice to see your family Marty, all the very best to you, and the herd!

Good on ya for greasing it before use. Ive seen way too many bearing failures on brand new equipment fail from lack for grease. I try and explain to people that they only put just enough grease in them from the factory to keep them from rusting on the shelf.

LOL... that last "bong" was awesome!

Great job. I can't believe your wife didn't appreciate you getting her an early Christmas present 🤣

Hi there Mary. ..from Marty. Love your videos. They are very helpful and inspiring for me. Can I give you a little tip? The next time the ram charges you give him a swift kick right between the eyes! I'm serious. It impersonates another ram charging back. Don't worry about their sculls, they're are built like a reinforced battering ram (pun intended). It was my only means of survival when in close quarters with stud Marino rams that wanted to run over you. I found most rams did not go past 3 kicks. They would shake their heads and walk off wondering what had just happened. You would get more respect from them next time too. But, don't leave one by himself in a race behind you! He clipped me from behind in the back of the knee and sent me flying. He probably went back to his mates and gloted..."I finally got that shepherd!"

You have a beautiful family my friend. I think this is the first time I've seen them. Cheers!

Man, $1000 for a chipper like that is a good price. That DONG at the end cracked me up.

Yes, shocked! "Hard to believe that Marty T bought a "new" piece of equipment" always interesting, thanks Marty 😊

I like that gong at the end! That could be your signature sign off!

Usually the PRC label (to me) is a red flag, but this unit appears fairly decent. Keep us posted on how it holds up!

Love the “ding” of ram skull on chipper housing at the end, lol!

When I saw you swing that first log near the boat I'm holding my breath and thinking, don't drop it on the boat! Then I saw you had it with the grapple. >Grin

And it was her Christmas pressie too. Nice move Marty

I've been watching you videos for months and I find them so calming and a pleasure to watch really enjoyable thank you

Another job well done. Your David Brown is really running great and the new chipper was money well spent. Thanks again for your time and videos.

I like how versatile your David brown tractor is, you buy a wood chipper and the bloody thing bolts right up to the pto on your David brown tractor, I think that David brown tractor will out live that brand new wood chipper, what a must have, to own a David brown tractor like the one you have, a for ever tractor, God's Peace

Have been thinking of getting one of those chipper's for a while, as i constantly make a burn pile with branches. Good to see both Browns in action.

Nice work Marty.. I did smile at your wood chopping efforts for next winter, nothing wrong with that but we had a fair amount of snow an minus 1 and colder temperatures this past week or so, with a trip into town not so long ago (around 8-30 PM UK time) and the compressed snow on the side roads In town are thick sheet Ice as the very cold wind blows In off the sea there/ My driving was cautious on the sheet Ice not courageous as I had a 6 week old Great Granddaughter, Granddaughter and her partner on board taking them home.. Used to love the cold weather and played out in it like a fool same as everyone else, but now at 72 would rather be at home Indoors - lol.. Also miss my once log fires but our now my, retirement bungalow was updated with "Air Source" heating units so make hot water from cold air like a magician/ so. no need for logs as we dont have an open fire or stove - All Electric.. But, must look to the future I guess.. Just got a warning on my phone from the water supply company telling the coming thaw next week will bring broken pipes and water escaping If not careful, so that means the underground mains supplies breaking maybe.. Nice to look forwards too - lol - Thanks for the video Marty - Ian. Coastal North Essex - UK.

I swear that sheep/goat thing at the end was begging to go in the barby spit.

That kid was like a in a candy store, when he saw the chipper.

Mate you are so patient with that bloody ram. As a fellow NZer and sheep keeper I would be applying our NZ 3 strike law before it gets repealed. Seriously if he hit you when you were unaware you could easily end up with a busted knee. He needs to respect you more! That means you need to butt him (figuratively) harder than he butts you. Doesn't mean you can't still be mates. Lol.

That "BONG" at the very End got me 😂😂

I love the ending. The *hunk* was exactly what I wanted to hear!

I'm always amazed by how nice the cleaning rags and cups used are, is Mrs T. aware...

Remember Rambro🙂👍

I think some mint sauce needs an introuctionto that ram !!

You need to take one of those 3 inch logs and let that sheep know who is boss.

Enjoyed the family cameo. Your wife and children seem dear. Stay safe.

Those sheep are Hooligans..

Amazing patience with that animal.

That ram has some manners to learn one way or another. Nice update and thumbs up to you.!

how delightful. i was hoping for a marty t for my birthday and i got one! thank you.

that sheep is getting a bit big for his britches... just in time for Christmas lunch

Really nice to include you children .great as always mate👍🍺🍺

love watching your channel..i can't believe what u have got in so little time.. love seeing kids out with u...

Really cool chipper! Made quick work of all the branches for sure. 👍 Looks like you could use some steel chaps for ram protection. Of a suit of armour.

nice of them to give you some angle iron for future projects or repairs right there in the packaging. if you just leave that pile of chips there for 2-3 years, turning them once a year, you'll have some awesome compost to spread around your yard.

That’s a beast! Tractor working like a champ as well!

Good to see the family. All seem interested and excited about anything new! Glad you didn’t let ANY of them help out. That’s one dangerous machine that can pul an arm in. Perhaps some knee patches for the boy might get him trough another outside rough play year - haha. David brown sounds GREAT! Chipper will definitely come in handy for you every year!

I have the same unit from Titan Attachments here in the US it sells for about $1800 US you got a great deal. That’s about what mine. Cost on a Black Friday sale a few years back.

The novelty wears off after about half an hour. Fucking brilliant.

I want this guy's life so badly........

Family shot, great one man.

Quite surprised u bought new.always seem to buy old and use u're amazing skills to make like new

The little apprentice was so excited with the new machine. I enjoyed his feelings 🇦🇺👍😉😁😘

3:36 when you're less inclined to care about the paint, grind the top, where the riser plate for the bearing is welded, and weld the top as well, on those (both sides). That's a stress crack waiting to happen. Edit: to clarify, i'm talking from experience, i welded the same type of machine (this one was red with a slightly larger wheel and aperture intake) for my neighbor. The weld had cracked at the PTO side, towards the chipper evac.

That Ram of yours is a bugger isn’t he.

The metal crate is almost worth the shipping cost. Stock for the next project.

Very nice looking family! Thanks for sharing.

Some lovely looking logs. 👍👍👍

That chipper will make great sheep mince.

I have the same wood chipper. Works still pretty good after 6 years.

Looks like a great addition to the homestead...

Marty! Thank you for doing your part in cutting down and mulching pines. Terrible terrible trees. Regards from North Carolina and a pine hater.

Marty T videos make my day. Thx for making awesome content

Best part look at your Christmas present. Lol Greetings from TN USA

Marty great investment it gonna save you money and time it pay for it self in the long run

Nice to the the family and sheep.

" Are you going to grease it ? HAHA ! Thanks for sharing Marty glad to see you !

The happy dance while opening was AWESOME LOL!!!

Great vid, mate. Awesome to see the family. Hope they enjoy their Christmas present...

Bravo for having ear defenders for the little one!