I agree!!

Hi kev

Not as Awesome as KSR!!!

So when is Kevin build a jet boat? Then Cleet will need a proper boat, then the boosted boat will come....

We need a ksr jet boat build soon? 😂

😂😂 I'm going to use that line on my gf tonight and see how that goes...

With a pic of the Renegade throwing the 40' high roost! Lol

@@rpmspeedlab993 keep us posted.

I would buy a shirt with that on it. Come on fin do it.

@@rpmspeedlab993 good luck!

The so cal fast jet boat scene is a ton of fun. Going out to the lower colorado river is like boating in a classic car show with all the big chrome and blown engines. The tunnel ram'd LS looks really good in that old Roger's

@@pw383426 Are they all selling cocaine or doing shady real estate deals like the cigar boat scene in Florida?

@@CIARUNSITE of course

@@CIARUNSITE its cali, so it's mostly weed. They always talk about Hydro's.... not like a drag or circle hydro boat... more like hydroponics growing dat green

Thanks to that episode on faster with Finnegan where that same boat couldn't hold up on the water! Seems it sparked something in him hahah! Dudes a genius his bud from roadkill is also as crazy and smart! If if not mistaken that was his cousins boat he bought it from.

Underrated comment

thanks, homie.

You can almost think of this like an upside down WW2 smoke screen from planes. Obviously the how is different. But the end result is similar.

Thanks for watching!

That should be an FSM shirt. “Save Rubber throw Water” With a picture of a jet boat.

@@MrHatchbody I really like that idea! Definitely would buy and wear.

@@disgruntledegghead6923 👌was thinking the same thing. ✌️

You can't go fast in a pump boat anyway , any ANY V drive worth it's salt will walk all over that vacuum cleaner

@@hydroy1 But this video is all about the "burnouts"? Save rubber, throw water!

Thanks for watching!

Not just because chicks dig it...haha

we're on a mission from god.

@@FinnegansGarage You’re my hero!

@@FinnegansGarage “It’s got a cop motor, cop impeller, cop droop and a cop angle to it’s dangle.”

@@FinnegansGarage then God Speed sir *salutes*

You read my mind right there.

"Dang rogue rocks are confusing as airplane chocks." (sry James, had to, lol.)

James has many more concerns with his boat than running his jet drive dry.

@@nunyabinis “still budget left”

there's a clutch between jet and drive shaft... he disengaged it to start the motor.

Lol Renegade would stomp that boat in it's current condition.

@@bepbep7418 yeah it wouldn’t be close

@@bepbep7418 Jackstands boat would be pretty cool if they took their time to right all the wrongs with the engine and took it somewhere to someone that knows what they are doing to fix all the fiberglass fuckery going on in the the rear end.

@@TheBignick243 After they finish the 2500 challenges, I think do another. All three boats get another 2500 to mod what they have and repeat the challenge. BTW, jackstand would dominate at that point, right?

No. 'you're'. And why did you capitalize rooster??

Ohh no 😟 the grammar police is here 😟😟

Dork Spray.

HAH, Just blow the ski dock clean of the posers and install your own tribe.

There's a video here of a guy helping put out bush fires with his roost, it's great.

Was just thinking about how long before KSR tunes James' boat and he heads to GA with it.

I doubt James will have a boat left after the driving portion of the contest.

Maybe when he gets it running right and is not sucking water through the combustion chamber LOL!

@@79tazman yeah I'm not sure he really needs the water injected into the exhaust, that's very old school. Pretty sure none of Finnegan's boats do that.

We know James now, he's a racer and I doubt he'll race anything unless there's at least a chance of winning 😊

Suction by ass, it's atmospheric pressure that moves the water into the pump!

@@rondye9398: Not really, unless you're assuming the atmospheric pressure on the whole lake is what's pushing water into the jet pump. What that system really is, is a ducted, shrouded propeller whose water stream is enclosed, rather than simply exposed to the water in the lake. The forward moving force is the result of Newton's Third Law of Motion as applied to water. Specifically, if you take in a lot of the stuff in a short amount of time and pump it out at high velocity, you get a jet force. Finnegan's contention is that because the jet pump (an impeller or ducted propeller, if you wish) is drawing water in, then it is that "suction" that is "sucking" the boat through the water. But that's like saying a jet engine "sucks" itself through the air. That may work for a "ducted fan" -- which is the "bypass" stage of large jet engines -- or a multi-blade propeller inside a shroud, but ultimately what moves a jet-driven vehicle of any sort is the reaction of throwing a large volume of fluid out the back.

Allatoona

@@FinnegansGarage you haven’t always lived in Ga have you

Mike is not an engineer, much less a physicist :-D

After a quick read on waterjets, I would say the system is pushing, due to the waterjet creating "thrust". But, I think the question of push or pull has more to do with the placement on the vehicle. If the engine and waterjet were mounted on an extended arm in front of the boat, it could be described as pulling. But mounted anywhere on the boat itself is still pushing. Or is it if the waterjet were on the front of the boat? If I tow your car with a rope, that's pulling. If I pull up behind you and push, that's obviously pushing. I think Mike is just trash talking for humor value, but it's a fun thought experiment. Is a front wheel drive automobile pushing or pulling the car forward? Would forward being pulling and reverse be pushing? In a front engine car with rear wheel drive, everything in the drivetrain is pushing, all the way to the axle/s...if it's a manual transmission. But what about an automatic? A torque converter could arguably be pulling. When the engine side spins up, the other side follows, spinning the drive shaft, etc. Once it's spun up, I think it probably reaches an equilibrium of push/pull, since it starts to behave as one unit. But on spin up, the back half of the torque converter is definitely following, which implies it's being dragged along, which is obviously more pulling than pushing. If you take a high pressure water hose and drop it, it will turn into a wild snake and start spraying water all over the place. Is the water pressure pushing the hose around, or is the hose being pulled up the water column? Or is it both? (Newton's 3rd law)

@@strangersound You need to go back to grade 10 physics and this time pay attention.....

@@strangersound how many hits did you take on the pipe before you wrote this?

Dude you make my damn head hurt

Most intelligent words I've heard.

Crypto is the new gold

@Big bobby J That won't bother you if you trade with a professional like Mr Gregory Manure

I heard that his strategies are really good

@@samanthavivian3916 Yeah, My first investment with Mr Gregory Manure earned me profit of over $25,530 US dollars, and ever since then he has been delivering

You should build a standard beetle not a super beetle. The super might handle better but that curved windshield and big old front end are gross. Plus the strut towers crack. Standards also weigh 1500 to 1600 lbs. and that’s with a 4 point cage a roof rack and subs and amps. Just saying. Also 600 hp? Is that a turbo T1 or turbo T4, Subaru EJ, turbo 2 rotor? Is your super a 1302 or a 1303?