I have to say the quality of the content in this video was outstanding. I follow practically every tech guy that talks about the ATEM Mini and I was shocked to see how clear this was. And the fact you have less than a thousand subscribers caught me off guard. Would LOVE to see if there is a way you could go more step by step. You for sure made it sound easy, that in practice I for sure get stuck hahaha

I've been watching several of your videos having recently (this week) acquired an ATEM pro and a Stream deck (today), planning to make my production much easier - perhaps even starting to create some live streams. (lord help you all) That being said, I have a few comments You production is outstanding It barely shows that you are using a teleprompter, in my case is shows a lot - maybe I'm just less used to it than you are I love how you have the artistic flair to light the background - this is definitely an area where I could take one giant leap for mankind Your explanations are perfect, it shows that you take the time to create a script that flows well and hits all the points You clear know your equipment and know how to tie it all together The only thing that I wished would be improved was your posting schedule, more please... much more That being said, I will definitely be on the look out for more content Do you take content requests? I think go to the basics, for example you showed how to create a lower third in another video and then create a macro to display it I don't think your stuff applies to "live" content only, I think it can definitely be very useful for all of us engineers that have very little artistic ability (even when I ride my Harley I wear only black ;-) ) Well done, you channel may appear small but this is an illusion as it packs a major punch.

You are solving the problems of my life one video at a time, keep the good work man!

Sweet episode! I understood about 10%. Not because of your explanation of it. But because, damn I just woke up. Need coffee and will rewatch. 🤲🏼

Great to the point video.. i will soon be trying this

awesome stuff thanks!

awesome mate .. thanks ..

This is an incredible channel and this video has blown my mind. You should monetise this info by putting together a course on this specific video on somewhere like skill-share or the other timely way would be to offer one-on-one tutorials (which I would be very interested).

Amazingly helpful content! Thank you!

AT 3:02 min. the part about messing up...love all the pop ups you added to video...mine have about 10'xs the amount pop ups and NUKE BOMB EXPLODING when I mess up. Lol! I'm watching this video to learn how to set up macros in my ATEM...just got the Streamdeck Mk2 Friday. Bought it after watching your videos, by the you are an excellent teacher! I have severe dyslexia, curse and a gift, a challenge for me to tackle the digital world, however a must for my business. So thanks again for your content, videos are very helpful. I've got QTS. and going to search your videos to see if I can find the answers. Have a Good1! -Jeremy

I literally gave up hope today. At times felt like it was impossible! None of the content I've watched in past 1-2 days has the exact same setup. Amazing video! reassured me I had the right tools I'm just trying to move way to fast 🤣

Wow. This is where I’m trying to be working with all of this. I have the 810 ISO, the stream deck, OBS and companion. Definitely would like to see some videos on using all these together with Macros.

You make my nerd heart sing

nice guy 🙂 Thanks!!!

Hahah, right when you started talking about the macro app, I was all “This guy sounds like he could really use an Elgato StreamDec....oh never mind.” 😂

WOW! That is amazing! I'd watch a video just of you setting up all your macros from scratch, lol.

Holy fuck, dude!! You're a slew of knowledge. Thanks for this

Thank you for sharing!

WOW!

Great movie references👍🏻

Great overview!

Super helpful, subbed!

So I need to set-up a complex macro that does the following: 1: Load my "Starting Soon" graphic from the media player. 2: Run my countdown timer from H2R Graphics. 3: When the timer ends use my stinger in OBS to transition to my main cam and turn on my mic. 4: load my live bug from the media pool. I have the graphics created I'm just unclear on how to set up the macro. Can you help? I have a Stream Deck, Companion, H2R Graphics, and OBS. I just can't seem to see the clear path to my end result.

I have the blackmagic studio pro HD and just updated the atem control software but I don’t have the eq setting in the audio section, does anyone know how I can get it ?

I love this but how do I do it?

Your Atem mini pro videos are priceless and look more than pro. Thank you for this big amount of work from France ! Would You say Atem mini pro can completely replace OBS ? (except your "trick"to play videos/animations)

Great energy & content! How are you scaling browser window to fit overlay?

Wonderful content on your channel! I have to stream a theatre piece, where the structure is as follows: 1) Actors in the stage 2) Actors in the stage together with PIP (pre-recorded video coming from another computer). Is there any way to create a macro to "call" each video and at the same time create the PIP, and then go back to the main scene (without PIP)? Thanks a lot!

Can you do more than the twenty slots for Macros? I need like 40 more....lol

Hi, Is it possible to use macros to show different lowerthirds? i mean assign different image from media library to different macros. example: Macro 1: shows image 1 and then fade Macro 2: shows image 2 and then fade

I could try and pitch my church on purchasing ATEM Extreme Pro ISO for the extra inputs, but I don't think I'm going to get them to bite on that. I understand the Fill and Key on the ATEM, and I know ProPresenter, and EasyWorship is like in some way. We currently have Easy Worship, and I'm looking to do a setup with ATEM Mini Pro ISO. I want to have 3-PTZ cameras feeding inputs 1-3, and then 1-HDMI Input (No. 4) from the Computer. I want to do both Fill and Key on that input. Could I use a StreamDeck and create macro buttons that would switch my output display type from PC, then the input type on ATM back and forth between Fill and Key? I want to do Lower-Thirds lyrics over the LiveStream video, and then Switch to Full Screen for Announcements, or Videos we may play during the service, so they are on the LiveStream as well. I want to be able to stream from the ATEM to Restream.io Does this sound Possible?

I have the 15 key stream deck. I can set-up multi actions but the stream deck delay action is not available. The multi action delay is available but is not precise. Do you know why the option is not available?

In Macros can we also implement videos (e.g. Lower Thirds in .mov or .mp4 format, imported to ATE Mini Pro) or would they have to be still images only ? In other words can the animation be prepared somewhere else and imported to the ATEM device or does it need to be composed within the ATEM system ?

4:07 DREAM WEAVER is still around????! Next time try VS Code - its free, fairly lightweight, and is a fantastic all around text and/or code editor.

hi am looking for a way to add videos to play back into my atem live streams i notice the media players only hold stills and not moving graphics or video how do i get my intros and adds into my production

Hola, tengo un problema, tengo mi atem mini extreme, mi stream deck xl y mi notebook, despues de hacer todo los procedimientos de descargas de los programas, bitfocus companion , el de stream deck llego hasta que aparece el OK en verde de que estamos conectados. voy a BOTONES del lado izquierdo y a PRESETS del lado derecho arrastro hasta un boton una funcion cualquiera y se acopla perfectamente en uno de los botones EL PROBLEMA TODAS LAS ASIGNACIONES QUE HAGA NUNCA SE VEN EN EL TECLADO DEL STREAM DECK, ES DECIR NO RECIBE ESA INFORMACION , QUISIERA SABER , QUE ESTOY HACIENDO MAL, GRACIAS. CARLOS.

Hi man thanks for this video 👍 I am an IT instructor and I had a Sony mirrorless and gopro beforehand. I have invested in to Mac mini M1, Atem Mini Pro, Stream Deck, a main 34” inch monitor and seperate multiview monitor for atem mini monitor output. I can control my scene with atem macros combined with stream deck companion app. But obs makes things much easier like overlays transactions etc. So I want to integrate obs in to my system. Since I am using my mac mini to share my desktop and stream via obs on the same device seems like a bad idea. I dont want to use software switcher like obs instead of hardware switcher atem mini. Do you have a suggestion how can I combine atem mini with obs and companion app?

Can I build a macro that will zoom and pan to follow someone walking? I have preset views loaded for each cam angle. But I have to manually following the walking person during a live. If I can preset this to a macro and just click it. I can then prep my next cam to load..... any ideas???

Can you keep atem macros html file

Hey man! I am curious how you setup your atem to obs... I want to get an atem mini pro iso, cause i have to record specific camera angles to work with the footage later on. but the atem mini pro iso have only one usb c port... so how do i work with obs while recording everything on ssd?! i dont get it... may you could help me... thanks for your videos, that helps for stinger transition and that was also a big question mark on my list...

I feel like my programming experience is probably over-kill for my macro job.

What does it take for us to hop on call?

3:52 - 1337 H@x04!

ahhhhh my eyes! 4:21

Sorry, but are NOT a Master (teacher)... Master Macros??? You are just love yourself and yours effects!!! Did I get something from this video??? NOTHING!!!

Sorry to quote you buit that is a lot bunch of nonsense and talking and yada-yada. sorry.