Master the Basics in Woodworking with an Easy, Simple Box

Рет қаралды 49,624

Күн бұрын

#woodworking #beginnerwoodworking #diyprojects
Because a box is the basis of so many aspects of woodworking, mastering the
techniques of making perfect square corners is a skill every craftsman should possess.
Magnetic Angle Gage
amzn.to/3KEAXzD
Push Block
amzn.to/3s9MzEF
Clamps
amzn.to/3DTY1qA
Machine Square
amzn.to/3DSkd4b
Trim Router
amzn.to/3scd9wU
This video is not sponsored. Some product links are Amazon and other affiliate links which means if you buy something we'll receive a small commission. This helps support my channel so I can continue to make content like this.
DISCLAIMER: Woodworking and the use of power and hand tools can be extremely dangerous. You are responsible for understanding the safe use of your tools and techniques. Your safety is YOUR responsibility, I accept NO responsibility or liability for any injuries, accidents, death occurring to you or others if you attempt to do the things that I do or use advice that I give.

Пікірлер: 52

@WoodworkingWithWes 10 күн бұрын

Hey there it's Wes...If you have any projects or specific questions you might need help with go to www.woodworkingwithwes.com

@gsp911 4 күн бұрын

8:45 I made the same mistake 10-12 years ago, luckily I can still count to ten. But it sent me out of the shop for a few days. Always wait for the blade to stop before doing anything on the table. But thanks for the video. 👍

@pascaldpr0710 Ай бұрын

Bonjour de 🇫🇷 un vrai plaisir de regarder les vidéos !!👍👌je les garde sous le coudes avec plaisir, la simplicité est tellement agréable ! Merci Et à bientôt ! Pascal.

@i_love_avg_american_homes 9 ай бұрын

You're so Professional and really good teacher Mr.Wes and your work is always is so detailed as well thank you for teaching us.

@WoodworkingWithWes 9 ай бұрын

Thank you! I really appreciate your kind words, Wes

@irishchopper9065 9 ай бұрын

I just started woodworking and your video is so rewarding. Great teacher.

@WoodworkingWithWes 9 ай бұрын

Thank you...I appreciate the comment. Welcome to our community! Wes

@johnsloan6836 Ай бұрын

Really good info Wes. Do you need a big watch on your wrist when wood working? Sorry but I am always thinking safety.Regards, John.👍

@GroundedFlyboy737 9 ай бұрын

You are an outstanding instructor, thank you for teaching us!

@WoodworkingWithWes 9 ай бұрын

Thank you for the visit!! I appreciate your comment, Wes

@bobtaylor7361 4 ай бұрын

Wes, Thank you for your many videos. I learn something new every time. After seeing your video on the fork and spoon kitchen drawer, you shamed me into making a couple for my kitchen. In fact the bug bit me so hard, I did some in the shop. And with mini drawers that slide on top of each other. I have make a lot of stuff with at my side. I've done woodworking for 40 years. But its nice to have a 2nd pair of eyes at your side. We all thank you.

@WoodworkingWithWes 4 ай бұрын

Hi...that is awesome! Thank you for your kindness, that's what keeps me going! Wes

@nore8141 5 ай бұрын

What a informational video on how to make a box. Thank you 🙏 ❤❤❤. Much appreciated

@mstev5956 9 ай бұрын

Love your videos You explain it all very well (I’m a newbie) Thanks

@jandblawncare8570 Ай бұрын

I tried my first rabbit joint last night and I'll be honest, it took me a few cuts to figure it out 100% but finally got it and made several cuts to hopefully imprint it on my brain lol. Im making a bunch of horse grooming totes and was using butt joints, glue and 18ga 1 1/2" brad nails and so far they're very strong for what they are but trying a few like this. Thanks for the video, Ive watched it several times and subbed to a great channel.

@WoodworkingWithWes Ай бұрын

Very nice...welcome to the community!! Thank you for your comment. Wes

@b.8972 9 ай бұрын

Wes, your audio sounds sooo much better. Again you are a wonderfully skilled teacher. Thank you for sharing your knowledge.

@WoodworkingWithWes 9 ай бұрын

Thank you so very much for letting me know about the sound. I really appreciate your support and kind words. Wes

@AlliCatChannel 2 ай бұрын

Love the videos, they are very informative, keep up the great work.

@dwayneford1990 2 ай бұрын

Great video. I love the way you lay things out so clearly. By the way, not all machine squares are square. I bought a set from i-Gaging that was anything but square. I trusted them because they were "machine" squares and the result was horrendous - both in terms of money wasted on expensive lumber and also my time and effort. I think you should make that clear.

@shortaybrown 9 ай бұрын

Great job. Thanks!

@WoodworkingWithWes 9 ай бұрын

Thanks for watching!! Wes

@ariomarariari5089 9 ай бұрын

muito bom .gostei valeu abraços.tmj.

@javierflores4567 4 ай бұрын

Great video 🎉🎉

@robwaz1547 9 ай бұрын

Great, simple we’ll explained. Thanks again WES

@WoodworkingWithWes 9 ай бұрын

You are so welcome...thank you for watching !! Wes

@IftikharAhmad-fv7rk 4 ай бұрын

Nice video

@ridley8340 9 ай бұрын

Brilliant, this is just what I needed and going to make this box.

@WoodworkingWithWes 9 ай бұрын

Thank you for your kind comment...glad you enjoyed the video. Wes

@johnchurchill786 9 ай бұрын

Great video Wes! 👌👌👌👌🔥🔥🔥🔥

@WoodworkingWithWes 9 ай бұрын

Appreciate it...you are so very kind John to always comment on the videos!! Wes

@nataliearena2241 9 ай бұрын

Great. Thank you!!!

@WoodworkingWithWes 9 ай бұрын

Thanks for watching...Wes

@jansterken8304 9 ай бұрын

Good video! I would say you should never use the fence AND the miter gauge at the same time.

@d.k.1394 9 ай бұрын

U must be careful

@WoodworkingWithWes 9 ай бұрын

Thanks for the tip! Wes

@rogeliogarcia7423 8 ай бұрын

Excelente!

@DanDDirges 9 ай бұрын

Excellent video Wes. I`m thinking how to stain the pine box without blotching but that`s another video perhaps. I always enjoy and learn from your videos.

@WoodworkingWithWes 9 ай бұрын

Thank you for your kind words...glad you enjoyed the video! Wes

@juaneduardo2985 Ай бұрын

Me perdí para que le puso ese trozo de madera a la tapa.de la caja .nunca más se ve.

@Tukangkayu_ae 9 ай бұрын

Luar biasa

@d.k.1394 9 ай бұрын

Great

@WoodworkingWithWes 9 ай бұрын

Thank you ! Wes

@sergueiothonucci1638 9 ай бұрын

😃😃

@daviddelossantos6075 7 ай бұрын

I’m here to learn the basics so I can make a guitar amp speaker cab.

@jillkaiser1747 9 ай бұрын

Your sound is so much better🎉

@WoodworkingWithWes 9 ай бұрын

Thank you for letting us know...I appreciate the help :)) Wes

@albertstrong5516 9 ай бұрын

Maybe you need to measure twice and cut once.

@d.k.1394 9 ай бұрын

Lol

@weekendwarrior3420 9 ай бұрын

Would be better to show how to undo the corners and reduce the size, just like you'd do in the real world. Your measurement procedure is weak. But you've shown to us DIYers one spot where we'll screw up.