Mastercam CAM Tutorial | Programming The TITAN-1M (FREE Resources)

Рет қаралды 240,883

4 жыл бұрын

FREE Mastercam - FREE CNC Machining Education.
Try Mastercam for FREE:
bit.ly/Mastercam_Titan
Download the Kennametal Tool List and check out the FREE Academy Resources for this project in related files to the right of the video tutorial: academy.titansofcnc.com/series/titan-1m/mastercam-program-the-titan-1m
Sign up for our FREE CNC Academy: academy.titansofcnc.com/signup
Subscribe for daily content and expert knowledge: bit.ly/SUBTITANS
___
___
FREE CNC Machining Academy. Join the Revolution:
academy.titansofcnc.com
Follow us on Instagram:
titans_of_cnc_academy
Like us on Facebook:
titansofcnc/
Join the conversation on our Facebook Group:
groups/titansofcncacademy/
Connect with us on LinkedIn:
www.linkedin.com/company/titansofcnc/
Follow our CEO, Titan Gilroy:
www.linkedin.com/in/titan-gilroy/
___
___
THANK YOU to our Partners who make this content possible:
Kennametal - bit.ly/TIKennametal
Mastercam - bit.ly/Mastercam_Titan
Blaser Swisslube - bit.ly/TIBlaser
Mitee-Bite - bit.ly/TIMiteeBite
Royal Products - bit.ly/TIRoyalProducts
Schunk - bit.ly/TiSCHUNK
JobBOSS - bit.ly/TiJB10
Tormach - bit.ly/TOCtor
Autodesk - bit.ly/TIAutodesk
#CNC #Machining #Machinist
MB017E7JAFBH4VC

Пікірлер: 179

@bearly1727 2 жыл бұрын

I watched this out of curiosity because I thought it might show me a little of what I would have to learn for laser cutting. I really enjoyed your teaching style, you are clear, focused and obviously very competent. Thank you, I really enjoyed the window into programming a build.

@wildin13 4 жыл бұрын

Also I noticed when changing the lead in/lead out parameters. If you want the entry and exit the same you can use the arrow buttons in the middle to copy data from one side to the other. Speeds things up

@MrKio415 3 жыл бұрын

Thank you, this is my first CAM lesson and I learned so much.

@praveenchristopher5751 4 жыл бұрын

Thank u for such a great opportunity to learn programming ,sir v need more people like u n this cruel world..

@larpylarpster 2 жыл бұрын

This deserves a subscription. Well done brotha!

@keithlane4343 4 жыл бұрын

Merry Christmas Titan and crew. Thank you for posting interesting videos in 2019, and looking forward to more in 2020. Take care my friends

@whybag 4 жыл бұрын

You can condense a lot of the first 10 minutes. First off, go to Properties>Tool settings, and the top box on the right side is "Assign tools sequentially." That will auto-assign tools as 1, 2, 3, etc instead of doing it manually. EDIT: You can also choose tool SFM "from material", so all the tools pick up the designated SFM, instead of changing the speeds every time you load a tool. For the stock, you can go to Properties>Stock setup. You can do the bounding box from there, enter 1x2x4.1, zero it off the top face, then enter the Z offset .02. Instead of fussing around with transparencies and levels, it just inserts a wireframe with red hidden lines. It also tells the software there's stock on top, so you can select "Facing" and go straight to OK, you don't have to select the top face because it knows you're taking material off.

@VictorHernandez-nt3tw 4 жыл бұрын

True about the modeling the stock and face mill path. But if you want to use Optirough tool paths you will need to make a stock model the way Titan did. I mean you don't need to bc Optirough will read the outer boundaries of the stock the way you mentioned. But when it's getting to more complex parts where you have to tell MasterCAM what was roughed in previous ops and you need to use Rest machining with a different tool then you have to use the Stock Model toolpath as shown

@JohnBlaze505 4 жыл бұрын

This is the best tutorial I've ever seen. Especially since I can actually understand you.

@sanaghafoor3126 3 жыл бұрын

can you please help me can you please send me your file of mastercam which you have tried the same program

@nagsimo 3 жыл бұрын

that 's amazing what you 'r doing for many poeple , thanks you so much happy new year for every single person collaborating withy you and fore those following you, i really thinking about moving from quebec to texas

@jeremyritsema2532 4 жыл бұрын

Thank you for this video. I am heading into a Mastercam class next semester and a new series on it with be a great benefit. Merry Christmas

@no.step.on.snek.2423 2 жыл бұрын

This guys is reigning , defending, undisputed cnc machining champion of the world

@kastrup2dk 4 жыл бұрын

Merry Christmas to everyone at Titan of CNC I have worked in this industry for over 20 years I think it's a good thing you're doing with TITANS of CNC Academy

@TITANSofCNC 4 жыл бұрын

Thanks and Merry Christmas to you also :-)

@MrDan12585 4 жыл бұрын

@@TITANSofCNC how you can compare MasterCam to Fusion 360 ?? I know MasterCam is very long on the market and have plenty of users but what is your opinion ??

@alexbaigus 4 жыл бұрын

OMG can’t wait to see it, one hour 😍

@XNeo27564 4 жыл бұрын

I don't do anything related to cnc. Still I like to watch these video's because i'm interested in metals and metalwork in general :) Also love the way he guides others to have the possibility for success in life. Good luck to you all in the new year. I also notice myself saying BOOM at random repairs... Customers looking sometimes like boom? Yes. Boom it's fixed. ;)

@jameshamilton9390 4 жыл бұрын

Thanks for doing what you're doing. Would love a second video of the part being cut.

@kingcam5028 2 жыл бұрын

i am experienced programmer but i learn new things.. thank you.

@tonygombas491 2 жыл бұрын

supper video bro this is helpful to me because i am taking a course in cnc machining at the age of 61 i have been maching for 20 years as manual machinist i decide to up grade my skill wish me luck

@aleksacrnogorac2973 8 ай бұрын

Really love and appreciate all you guys are doing! Thank You

@lynnelanguedoc4049 4 жыл бұрын

Merry Christmas and a happy new year to you and your family and friends Tony from Canada 🇨🇦

@kithjoman9728 4 жыл бұрын

Very well explained video, awesome teaching skills

@Aidandgreat 4 жыл бұрын

Extremely helpful, thank you for all the help!

@lxc647 3 жыл бұрын

Thank you for this super detailed tutorial. BOOOM!!!

@leonelromero8349 4 жыл бұрын

Thanks for so much Titan. In 2020 we go for more BOOM!

@keenafyno7560 4 жыл бұрын

THANK YOU TITAN'S OF CNC for spreading knowledge and helping the youth, or anyone who wants to earn a honest living in a respectable trade; that I appreciate very much. (And I speak for many people as I write this comment.) LOVE THE MASTERCAM VIDEOS BTW. Titan is THE MAN!

@aspeaerospaceprecisionenging 3 жыл бұрын

we all do :)

@noeygarza6522 22 күн бұрын

Best Mastercam instructor.

@smithjan1409 4 жыл бұрын

Thank you, Very useful video

@pablooscoy6757 3 жыл бұрын

Great man! I liked it a lot. Alles klar! From CDMX!

@ddddgggg3393 2 жыл бұрын

I'm a CNC machinist and programmer in the uk. I've used all the cam packages but find mastercam to be more complicated than it needs to be - creating and working with stock for example . Solidcam for me is the best, most logical to work through whilst providing efficient toolpaths. It's all about opinions tho and I enjoy watching other programmers .

@santiagokof Жыл бұрын

Im kinda new at cnc programming using HSMWorks and its pretty easy. Id like to hear your opinion about HSM in camparison to SolidCam

@stingerstG 4 жыл бұрын

Спасибо! Очень интересно

@imfbrad 4 жыл бұрын

@titansofcnc the rapping skills were the best!

@wildin13 4 жыл бұрын

Another tip when using chamfer mills against walls. Rather than increasing the bottom offset parameter, switch to top offset and decrease the value. Let mastercam do as much thinking as possible so you dont need to do the maths.

@aspeaerospaceprecisionenging 3 жыл бұрын

i think the same way

@-MSF- 2 жыл бұрын

Thank you. God blessings.

@dugardmira3150 7 ай бұрын

Thank you I love it

@dpejinsky 4 жыл бұрын

In addition to backplotting, there's the verification mode in Mastercam where material removal is also simulated along the toolpath based on the stock model and the tool dimensions. It's the icon located to the right of the backplot icon (Looks like a step with box and a green check mark.) It's a pretty nifty way to simulate material removal, and helped me discover where, on a few of my parts, I actually missed removing some material.

@aspeaerospaceprecisionenging 3 жыл бұрын

exactly you can check in many ways were the material is left on your part after machining

@syedshamiulla7580 2 жыл бұрын

Titan CNC its really amazing explanation 💯

@VictorHernandez-nt3tw 4 жыл бұрын

If anyone has a question or is confused you can ask me anything as well and will try to answer. I have used MasterCAM most of my time machining. Titan is a busy man so maybe I can help a bit! And I don't work for him or anything just want to offer my help. Thanks Titan for your time teaching us

@keenafyno7560 4 жыл бұрын

Do you upload content?

@VictorHernandez-nt3tw 4 жыл бұрын

@@keenafyno7560 No I don't have a good setup. I've tried but quality sucks and I just haven't researched or got back to fixing it to be honest lol. But now that I moved recently to my new house I will try and get something setup

@hieupham-mw7sz 4 жыл бұрын

I did exactly what Titan did for the Optirough toolpath, but my result is so weird. it appears two levels. One is on the top and one is inside the part, but they are the same.

@aspeaerospaceprecisionenging 3 жыл бұрын

@@hieupham-mw7sz you must have set something wrong

@xXSquankyXx Ай бұрын

After making a bounding box and creating a stock model I cant get rid of the transparent stock model even after moving it to a different layer. maybe its the bounding box not sure. Also when he selects multiple edge chains by holding shift i can only select one

@tamdaonguyen8486 4 жыл бұрын

Thank you so much for your sharing. Good karma

@jgom4674 2 жыл бұрын

Thank you Titan!

@m.j.khnowledge Жыл бұрын

Thank for the video help

@automationselmatx4669 3 жыл бұрын

Excellent resource for learning Mastercam!

@automationselmatx4669 3 жыл бұрын

Would've loved to see this translate to the actual machining process as a follow up video!

@sergiolopez8599 3 жыл бұрын

Damn dude you are great, thanks for sharing your knowledge with all of us, I have the dream to become a great machinist and programmer!!!

@ngozomotsamai1480 3 жыл бұрын

great teaching like it

@paulchege8614 4 жыл бұрын

Master cam is the best. thanks for introducing it, looks forward 2020. Boom

@Juiceboxer0 4 жыл бұрын

oh. it went boom alright. mastercam's gonna come in handy

@aspeaerospaceprecisionenging 3 жыл бұрын

agree with you :)

@ambreenhaqani6683 7 ай бұрын

Hey Titan, first of all kudos for the series and the efforts you put in to make this great tutorial. So I started working on these building blocks today. Since I have only been following your CAD and CAM tutorial I don't understand how the number of entities in wireframe level changed from 29 in the CAD video to 39 in this video. It has actually got me confused whether I am doing it wrong or what cause while saving the CAD model it showed an error of rebuilding the models. Need help. Thank You

@mr.cheese2499 2 жыл бұрын

Good to know how my models get used

@LuisLopez-gd9hu Жыл бұрын

I was wondering if I could use every procedure showed here but in woodworking? I mean, apply the same methods on wood? Thanks for the great lessons!

@LuisLopez-gd9hu Жыл бұрын

Videos about 3 and 4 axis please!! Specially of turning!

@bernardoalbertoangelpino9184 Жыл бұрын

id like more videos about surfaces program and program about four and five axis would be great thanks

@rodentguysgopher 3 жыл бұрын

Great video, thumbs up. One thing everyone leaves off in Mastercam videos includine here is how do I program the flipping of the part to finish OP2? The part is not finished. I am trying to figure out how to program in Mastercam the when I flip the part over and want to machine off the same model we used in OP1.

@aspeaerospaceprecisionenging 3 жыл бұрын

you create a plane on the bottom and use it as WCS

@kernhermle5367 3 жыл бұрын

Hi, what software is better for cnc machining ? Solidworks or mastercam?

@cpufixer1 4 жыл бұрын

I am using fusion, not sure about this MC stuff... hey can you tell us how many more tools kennametal has sold since you started this...I for one have inproved my parts with Kennametal bits....

@susiemartinez8983 2 жыл бұрын

At 6:27, after he moves the model down and names the level, I notice that he already has another level with a wireframe. Is that from a previous video?

@JR-vg5ld 4 жыл бұрын

BIT CONFUSE G54 Y DATUM MUST BE ON BACK DEAD JAW - MOVE IN Y-.05 (INSTED OF -0.025) ? AM I RIGHT

@abmontelongo5289 2 жыл бұрын

thanks for the video , i really appreciate it , i got a question .. i m doing it but i got stuck : when you make stock model and create as toolpath then isn't possible to turn on(off the second level with the stock in the levels area , and you mentioned this as normal minute 7 at the video , but after for making the optirough toolpath , you make turn off the stock , me i can't do that ... if someone can help me i would really thank you guys

@colton7410 4 жыл бұрын

Just use 2D High speed dynamic for the pockets. Use a basic contour for a finish pass. Optirough is for roughing and stair stepping sloped surfaces.

@TITANSofCNC 4 жыл бұрын

It’s hits all 3 roughing needs at once and the point is to teach it early so students are used to it.

@VictorHernandez-nt3tw 4 жыл бұрын

@@TITANSofCNC This is true as us MasterCAM users that used V9 are used to Colton's method. I force myself to use the optirough even on basic toolpaths to get used to it. It's much more intelligent and when you get a part that's 100s of pockets you rather not select all of those and input different heights if all the pockets are different heights

@Shrwnat 9 ай бұрын

Yur my idol

@rohbsingh8365 11 ай бұрын

Hello brothers.... I need help... After facing operation when he did the cutting of inner side (slot)?? By using opti rough??? But in opti rough there was only toolpath on floor..... Where is the z step in opti rough?? Or he made the whole slot with only one cut?? 24:50

@420CrH 2 жыл бұрын

Is there an updated file for the tooling? I tried downloading from the website but the file was an older version of mastercam and I was not able to use them. Any help would be appreciated. Thanks for the help in everything else.

@liandacheng3285 3 жыл бұрын

Hello, if you have Chinese subtitles or Chinese version, what version of MasterCAM do I use now? thank you!

@nickomta385 3 жыл бұрын

what is the closest equivalent of optirough in x8?

@spoonermanhd2607 Жыл бұрын

When you did the rough milling toolpath it was dirty and needed regeneration bit you just jump cut past it and I'm stuck trying to figure out what's wrong with it.

@user-to5gb1cc9f 3 жыл бұрын

I click this guy! 👍

@andyvan5692 Жыл бұрын

interesting, but for viewers new to cnc design, would be nice to link the other video, which I switched to to find out how to "draw" this part, but in that video too, please go SLOW, I have Autism, and have trouble following your cursor moves, so slow it down, and maybe do a 150% zoom on the screen so we can see up close where the icons are and what they look like, as some of us also have vision issues (older viewers to :-) ).

@250smacks 9 ай бұрын

Do I have to have a cnc mill to do the online academy? I’ve been studying hard but without hands on I might not catch on

@danielsLL Жыл бұрын

does anyone know how i can get the generic haas 3x mill machine definition file for mastercam? my mastercam educational did not come with it.

@alf3071 Жыл бұрын

I wish I had a cnc to play with

@panchalvishal452 4 жыл бұрын

Hey Titan, If possible, can you please upload video about cylindrical mapping in 4- axis machine Thanks

@aspeaerospaceprecisionenging 3 жыл бұрын

4th axis rotary, rotary advanced or axis substitute

@panchalvishal452 3 жыл бұрын

@@aspeaerospaceprecisionenging Axis Substitution using Mastercam

@sijothomas6001 4 жыл бұрын

i use mastercam x5 and mastercam 2018 No have Art Tool bar why ?

@tonywilliams9779 Жыл бұрын

Hi We are a group of Vietnam vets which are trying to understand Mastercam but we cannot seem to get past the first step. Things in your videos are great but it is the very basic which is letting us down EG commands, as we cannot see which on the ribbon bar you click on so do you have any PDF instructions step by step on say the Titan -1M project so we can at least complete one excise. We are all in our late 70s so we are not that quick of the mark.

@ahmiles2005 3 жыл бұрын

Didn't see you set the feed and speed for the threads on the tap?

@stuartpeck8169 3 жыл бұрын

Surprised you didn’t go over how to calculate dwell time. Then again I understand you didn’t wanna get to complicated

@wildin13 4 жыл бұрын

Question about that plunge rate. I know when facing off material it wont matter but I like to edit tools as little as possible so I always put plunge rate around 75% of feed rate so when I enter a cut inside material I dont over load a cutter. Do you always use higher plunge rates?

@VictorHernandez-nt3tw 4 жыл бұрын

When plunging into air you use the higher feed rate than the cutting feed rate. But it all depends on cutter and method. If you're doing a helix or ramp toolpath your feedrate depends on angle and cutter style. Like Titan said, I don't reccommend plunging straight into material, and I ever need to I drop my plunge feed rate really low to like 5ipm in aluminum. Definitely don't plunge straight into material in steels, that will beat up or kill your cutter quickly, if not break it the first time. Helix is my preferred method and sometimes ramping as well. Hope this helpsn

@wildin13 4 жыл бұрын

@@VictorHernandez-nt3tw okay I just wanted to check I wasnt doing something wrong. I also ramp in. Very few of my features can be accessed from outside the material so I'm used to ramping in but alot of what I do is just because it's what has always been done and works, I.e. no actuall reason other than we just do. So I've learned to use lower plunge rates than cutting, that way if you get it wrong you're not over doing it, in theory that is. 99% of our work are 1 offs so we're not hunting for seconds savings more make sure we dont break things and get the job done.

@thomaskramer4739 4 жыл бұрын

awsome work, we need metric, includeing the tools ...

@cepiMASTERodro 3 жыл бұрын

I don’t have generic haas machine files, anyone knows how can I get it?

@sun71717 4 жыл бұрын

Mastercam 2017,18,19 & 20 versions got some really serious upgrades. Now Mastercam looks like a complete Cad-Cam integrated package with lot better user friendliness! Finally good bye to stupid old X series versions..!

@VictorHernandez-nt3tw 4 жыл бұрын

Yup. Love these MasterCaM versions

@pakman422 4 жыл бұрын

Its CAD is still super weak. Its best to still have a CAD package like Solidworks if possible. CAM tho? Mastercam all the way.

@sun71717 4 жыл бұрын

Of course! It's basically designed for CAM in first place!

@aspeaerospaceprecisionenging 3 жыл бұрын

next version will have some nice solid creation features

@aspeaerospaceprecisionenging 3 жыл бұрын

@@sun71717 thats true

@jiritichy6855 2 жыл бұрын

I am retired already 9 years. The last version of M/C I used was version 9. Watching this video(because of curiosity)I wonder if the table with levels and the description could be also expanded over the entire screen as it was in ver.9??? (so you can enter really long text string-used to be up to 125 characters I believe). Or are you limited with only that short of a text space as you are showing at 6:10/8:02? And then switch back and forth with actual work screen with Alt-Esc or some other sequence!

@mattcyr3342 Жыл бұрын

Version 9 is the bomb hahaha

@jiritichy6855 Жыл бұрын

@@mattcyr3342 what do you mean? It was the most sophisticated Cad/cam of the time (late 1990's and beginning of 2000's)....no errors in postprocessing..just perfect tool path.

@mattcyr3342 Жыл бұрын

@@jiritichy6855 Thats what im saying lol its awesome for just making stuff.

@jiritichy6855 Жыл бұрын

But I still did not get the answer from Titan or anyone else....

@michaelnavarrete1416 11 ай бұрын

Every time I try turning off the stock level so that I can select only the body of the model it doesn’t turn off. It kind of turns it into one. Anyone know how to fix that? I think it has to do with when I turn it into the stock model but I literally follow everything she does!!

@SinhNguyen-rk9gr 3 жыл бұрын

I use Mastercam 2018 and I can't load the tool library b/c it's a 2020/2021 version. How can i load that tool library to my mastercam so i can continue the tutorial? Thanks, great video.

@aspeaerospaceprecisionenging 3 жыл бұрын

you can create tools that you need yourself right click on the window where you select tools for your op (inside toolpath settings) and then select create new tool

@huynham8626 Жыл бұрын

Do you know any school teaching cnc programer? I would like to learn but don’t know where. thanks

@archewing Жыл бұрын

What advice do you have for the cut parameters section (22:31) in mastercam 2022 I don’t see the transition section, only steep/shallow. I get an error because of that missing step.

@lucasolander568 Жыл бұрын

Hey, go to "Parameters -> Linking Parameters -> Entry Motion"

@archewing Жыл бұрын

@@lucasolander568 thank you for the info. I am going to screenshot this and re do this.

@vijaysjai613 3 жыл бұрын

Very good teaching overlap missing

@stephenmarkovic878 2 жыл бұрын

A lot different than powermill 2021

@raider1628 4 жыл бұрын

hey titan, i have a basic vf-3 haas machine so no high speed. i have used mastercam opti toolpath but the program seems to take a lot longer. i bump up the feed rate as high as it can go but without that look ahead it still pretty slow moving. i have to revert back to traditional toolpath , was wonder if you knew a work around this problem?

@ov3753 4 жыл бұрын

Play with Arc filter and you will get much faster machining with the same speeds and feeds you used before.

@ov3753 4 жыл бұрын

Also I suggest you to use G187 if your machine supports it. Find video Tip if the day from Haas where they talk about this parameter

@raider1628 4 жыл бұрын

Oleg Vodovozov thanks for the tip!

@trace12345678900 4 жыл бұрын

In arc filter put the tolerance around .01” and click the g17 arc box. Use g187 P1.

@raider1628 4 жыл бұрын

trace12345678900 I will have to give this a shot!

@MathewJaino 4 жыл бұрын

bhoooooommmmmmm

@idrissmohamed7146 Жыл бұрын

can we get the cad file to follow tutorial ????

@misiukowalski5653 4 жыл бұрын

Any chance there's a tool list for Mastercam 2019? I don't have HLE available for 2020 and can't load the tools. I guess I can make do with the stock tools though*

@aspeaerospaceprecisionenging 3 жыл бұрын

you can create tools that you need yourself right click on the window where you select tools for your op (inside toolpath settings) and then select create new tool

@sainath5636 3 жыл бұрын

@@aspeaerospaceprecisionenging bro titan didnt create level 2 but it is showing in levels as wireframe

@moonsham1426 3 жыл бұрын

I chose mastercam because Titan use it My dear is working at Titan

@biswarupdas8480 4 жыл бұрын

Please include mastercam probing tutorial for titan 1m with autocompensation probing also include inspection by probing through mastercam

@burakbasarslan2321 2 жыл бұрын

I've a question. Whenever I click to stock model and create a stock model I can not hide it. I click levels, then hide the stock part but it just becomes ghosty it just doesn't disappear. Please help me :(

@SA-ne1re 2 жыл бұрын

The stock model is treated as a toolpath which are not hidable through levels. What you need to do is turn on "Only Display Selected Toolpaths". This will remove the stock model from the view and will only display the toolpath for the operation you have selected on the toolpaths pane.

@bhekidlamini51 3 жыл бұрын

In a production scenario how many of these parts could be made in a 8hours shift? Rough estimate

@SgtRum 3 жыл бұрын

@ a 1/2 hr cycle about 16

@mazarimenad8175 4 жыл бұрын

Formidable

@theprinceofliberia6793 Жыл бұрын

16 tools fir that part?

@BGraves 4 жыл бұрын

boom. Tuff actin tinactin. Boom

@neilmello2007 4 жыл бұрын

Why is mastercam better than solidworks?

@rob7439 3 жыл бұрын

HOWWW DID YOU MAKE YOUR STOCK MODEL TRANSLUCENT?

@SA-ne1re 2 жыл бұрын

@rob7439 2 жыл бұрын

@@SA-ne1re Thank you Ive since figured this out along with all sorts of other stuff thanks to people like you.

@PrimeMontages Жыл бұрын

53:18 nice and deep, nice and deep 😎4" warriors

@BGraves 4 жыл бұрын

This software has some serious archaic design and user interaction philosophies. Shame its the industry standard...

@aaronward3882 3 жыл бұрын

Its not the industry standard! NX and hypermill are the industry standard that everyone copies.

@UltraNyan 2 жыл бұрын

At school they force us to write g code into the simulator by hand on the spot by using technical drawing printouts, really makes me question what the hell im doing with my life.

@andrewspruyt1108 Жыл бұрын

It will be good for you in the long run. I had to do the same in school, and it sucked, but it helps you to really understand the code.