Mastercam Quick chips 2020 : 3D Secrets of getting smooth tool path This video shows how to deal with holes in 3D parts Tricks that cane be used in both solids and surfaces
Пікірлер: 18
@hasanafi13 жыл бұрын
Thanks for your tips. It helped a lot.
@integratedsolidsolutionsll33133 жыл бұрын
Glad it helped! I used the tricks from this video for many years, and they got me out of many problems.
@billruss67043 жыл бұрын
another way would be to go to your solids "tree" suppress the holes, re calculate your tool path then lock the tool path
@integratedsolidsolutionsll33133 жыл бұрын
Yes Bill you do that, But this solid has no history so you would have to use model prep to remove the holes. Then to keep ref to drill the holes you would need to copy the solid to another layer and keep track of it. Plus surfaces calculate faster. Plus this trick works in all versions of mastercam, because you can extent the surfaces to extend the tool paths. There is nothing wrong with removing the holes locking the toolpath it works. And is some cases I would do that. If you have good computer with a enough ram. If you have and old computer with minimum of ram the surface trick works better. I work with a lot of small shops that run older version of mastercam with older computers so the surface option work better for them. Thank you for you feedback Bill.
@billruss67043 жыл бұрын
@@integratedsolidsolutionsll3313 agree, surface from solids is a great way to deal with solids without having to have the solids option.
@sarathiv2793 жыл бұрын
Dear Sir This video is very useful one And Your content selection is too good. Keep rocking....👍
@jptel45214 жыл бұрын
Thank you for cool tips.
@integratedsolidsolutionsll33134 жыл бұрын
Glad you like them! If you like this one you should really like what's coming up 2 weeks from now
@robertsoso70934 жыл бұрын
Interesting way
@robertsoso70934 жыл бұрын
Good I hit print as they removed the comment with better and faster way from some user
@conceptsken14 жыл бұрын
THANK YOU SO MUCH!
@integratedsolidsolutionsll33134 жыл бұрын
You're welcome!
@irissanchez5584 жыл бұрын
THANKS A LOT FOR SHOW US HOW TO MAKE THAT
@integratedsolidsolutionsll33134 жыл бұрын
Your Welcome. I used this trick for many years. It solved many problems making all types of 3d parts.