Mastering the VEVOR Heat Press 15x15 8 in 1: Unboxing, Setup, and Review

Рет қаралды 29,476

11 ай бұрын

Welcome to our channel! In this video, we're diving into the world of heat presses with the unboxing, assembly, and comprehensive review of the VEVOR Heat Press Machine 15x15 8 in 1. 🔥
If you've been considering this heat press for your crafting, business, or DIY projects, you're in the right place. We'll guide you through every step, from unboxing and assembling the machine to giving you an in-depth review of its features and performance.
In this video, you'll discover:
📦 Unboxing and initial impressions.
🛠️ Step-by-step assembly instructions.
🔍 A close look at the machine's key features.
🔥 Real-world testing and results.
💡 Tips and tricks for optimal performance.
🤔 Is the VEVOR 15x15 8 in 1 heat press the right choice for you?
We'll answer all your burning questions and provide insights to help you make an informed decision. Plus, we'll share our thoughts on its versatility and quality.
Don't forget to hit that "like" button if you find this video helpful, and be sure to subscribe for more in-depth reviews and tutorials on crafting and heat press equipment. Have any questions or suggestions? Feel free to leave them in the comments below.
Thanks for joining us on this heat press adventure. Let's get started with the unboxing and assembly!
You can purchase this Vevor heat machine here - amzn.to/3rd5jCH
Etekcity Infrared Thermometer Heat Temperature Temp Gun - amzn.to/43b6HCP
*Like the video? Buy me a "coffee" ☕️ here. Thanks for supporting my channel! 100% of your donations go towards making these videos. www.buymeacoffee.com/cricuter
🔗 Cricuter's Deals
Sign up for Creative Fabrica's FREE trial here: www.creativefabrica.com/promo...
Or sign up for Creative Fabrica's discounted yearly subscription here: www.creativefabrica.com/ref/2...
For the best deals on a Cricut machine, shop here: cricut.pxf.io/DV9Nvn
Accept credit card payments right on your phone easily with your FREE Square Card Reader: square.sjv.io/5bndzb
Check out my linktree: linktr.ee/CRICUTER
Check out my favorite laser engravers here:
LaserPecker LP4 here: shareasale.com/r.cfm?b=203048...
WeCreat Vision 20W 5 in 1 Laser Engraver and Cutter here: shareasale.com/r.cfm?b=234405...
xTool M1 Laser Engraver and Vinyl Cutter
US Store: bit.ly/49YQ8xP
DE Store: bit.ly/3V5wjkq
EU Store: bit.ly/4bXCHA1
📣 Connect with Us:
Email: Cricuter@yahoo.com
Blog: cricuter.com/
Facebook Group: / cricutsvgs
Facebook Page: / cricuterblog
Instagram: / cricuterblog
Pinterest: / _created
KZfaq: / @cricuter
Some of the links provided are affiliate links. Cricuter is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program. As an Amazon Associate, we earn from qualifying purchases. This means, at no additional cost to you, we will earn a commission if you click through and make a purchase.
#vevor #heatpress #heatpressmachine #vevorheatpress

Пікірлер: 73

@betsy5931 11 ай бұрын

It's funny you made this video about Vevor. I just purchased the Vevor 5 in 1. I can't wait to get it. I found that buying from the company was less expensive than through Amazon and it has great reviews. Thanks for your videos. I learn so much from you!

@Cricuter 11 ай бұрын

That's great! I'm really happy with it so far!

@bcrwc 10 ай бұрын

How do you like it?

@eprohoda 11 ай бұрын

thanks. you sharred unusual view- 🤟

@Cricuter 11 ай бұрын

you're welcome!

@kinglevelsz 19 күн бұрын

Just bought this for 50$ on Amazon shoutout for the video convinced me to get it

@Cricuter 18 күн бұрын

$50?! That's a steal

@jerseylovesteph 7 ай бұрын

Thank you very much

@Cricuter 7 ай бұрын

You're welcome! Thanks for watching!

@sandybrickman1392 5 ай бұрын

I’m so glad I found your video! I’ve had this press for about 4 months and just got it out of the box last week. Still haven’t plugged it in. I did attach the “control until” lol. It does sound really funny!

@Cricuter 5 ай бұрын

Why is it always so intimidating learning these new things 😂 I swear my Cricut Joy sat in the box for a year before I took it out! Just "rip off the bandaid" and plug it in! You've got this!

@sandybrickman1392 5 ай бұрын

@@Cricuter I looked for the video of actually using this press, but couldn’t find it. I’d love to start using it! I mostly sub now, but standing for 7 minutes with the easy press and firm pressure is getting old!

@Cricuter 5 ай бұрын

@@sandybrickman1392 oh my gosh that's insanity! I'm using mine as we speak. It's so simple. Just plug it in, set the temperature and time and close the bar. Before you close it, twist the blue knob on the top to tighten or loosen the pressure. Make it so it's hard to close, almost requiring 2 hands to pull down. Put the material in before you turn it on and adjust the pressure. If you adjust it without a shirt in and then add a shirt, it might be too hard to close. That's it! Let me know if you have any questions. I'm making shirts all day!

@sandybrickman1392 5 ай бұрын

@@Cricuter thank you! My goal is to plug it in today!

@Jungopr 8 ай бұрын

To turn off the beeping sound: while machine is off press and hold minus sign ( - ) and turn it on. It will show OFF on the display. Do it again if you want to turn back on the beeping sound, but in that case it will show ON on display. That's the way we did on our 5 in 1 machine. Note: it also turn off the time up beeping notification.

@Cricuter 8 ай бұрын

Thank you!

@christymartin1053 7 ай бұрын

Just ordered the 8 in 1. Got a steal of a deal....$179.99. Also bought an oven and I'm thrilled.

@Cricuter 7 ай бұрын

That's awesome!! You're going to love it!

@christymartin1053 7 ай бұрын

I'm hoping. Now I just need to decide which printer to get. I keep going back and forth.

@RealWolfmanDan 6 ай бұрын

I got a black 8 in 1 this week at a wholesale/reseller for $40. Not kidding. I'm excited to start making stuff

@Cricuter 6 ай бұрын

That's an incredible deal!

@saramc3630 8 ай бұрын

I bought the 5 in 1 vevor heat press and found it a bit hard to set up, thanks to your video I’m able to set it up now. My next now once I set the temp and time after a few seconds I start hearing a beeping sound and the temperature display starts showing E1 instead. Like an error code I believe. Do you know what that means?

@dedrasmitherman7983 Ай бұрын

We received our Vevor 5 in 1 heat press last week. We have tried pressing vinyl onto a canvas tote which was the primary reason for the purchase. We did multiple presses, tightened down the pressure, but it still didn’t adhere properly. We noticed that the screws on top are not evenly pressing. The front three do not go down, making pressure uneven. Can you tell me how yours look when you press down? Do all the springs/screws press down evenly?

@lindapearce2457 11 ай бұрын

Great video,thanku.Just also wondering how u like your HTVRONT?Which one do u prefer.Thanx...

@Cricuter 10 ай бұрын

Thank you! I do like it but I don't think it has enough pressure. I have read that you can increase the pressure by purchasing additional heat press mats but I haven't tried that yet. I also don't like how it doesn't come with attachments. I think the Vevor 8-in-1 swing away is better for those reasons. amzn.to/3KocI8D

@RCStude 4 ай бұрын

Just wondered if you ever did a vid on pressing a T-shirt with this press?

@DavidWills2321 5 ай бұрын

Hello. I set up my Vevor Heat Press yesterday. My booklet referenced things that weren't even on my control panel, so I was kind of winging it a bit. I found out that the temperature seemed a bit low when I did my first test iron on. I also don't like the way that you can't tell how much pressure is being placed on the garment. I've seen several references online about using light pressure or firm pressure, but that's so vague. I had to press my practice t-shirt several times to get my iron on adhere. Plus, my timer never went down it's stayed at 30 seconds the entire time. So I just use my stopwatch to count down the time. This is my first time using the press, so I'm sure I'll get better with time but overall it was a fairly intuitive machine. I did find out that I need to reposition my heat press because it isn't getting enough clearance when I swing it away from my garment. Thank you for the video it was helpful.

@Cricuter 5 ай бұрын

I agree with so much of what you wrote. If you're new to heat pressing trying to figure out the pressure can be tricky. Generally speaking, I feel like you can never have too much pressure. The only time I ever run into issues is when there's not enough pressure. Unless you're working with a really delicate fabric like silk, make it heavy pressure. I tighten it so that it's hard to pull down and you need 2 hands. I actually hate my auto press because you can't adjust the pressure at all like you can with this machine and my vinyl never sticks. I also have issues with my timer not counting down so I do it in my head. I'm sure there's an easy fix for that I just haven't taken the time to figure it out.

@margomarroquin651 5 ай бұрын

It did that to me the first time. All I did was press MODE, and it started to countdown.

@TheRivaNileCollectionLLC 5 ай бұрын

Thanks for the video? How do I turn off the beeping? I saw a suggestion, but that didn't work for me.

@Cricuter 4 ай бұрын

I can't remember, I'm sorry! Mine doesn't beep anymore. I can't remember what I did.

@jangutschenritter9983 9 ай бұрын

I just watched a video by Angie Holden who suggested to test the temperature of the heat press, test the heat of the pad after heating it for 60 seconds and immediately check the pad and not the platen itself. I haven't tried this method yet. If you do, please let me know your results:)

@Cricuter 9 ай бұрын

Great idea, thank you for the tip. I'm going to try this

@Plumcrazie 4 күн бұрын

Is this one the newest model from Vevor?

@jangutschenritter9983 9 ай бұрын

Hi, Kerri! I noticed in your video that your heat gun did not give the same reading as the control monitor on your heat press. I have the very same heat press and temperature gun. My first vevor did the same thing....would not give a consistent heat temp with the gun. I sent it back and received a replacement. Using the same heat gun, it gives crazy readings as to the temp. Am I safe just believing the control monitor? Did you adjust the temp on the control monitor so the heat gun read the temp you want? What's crazy is the heat gun with give totally different temps, checking the plate multiple times. Thank you for your video, and if you have any suggestions, please advise.

@Cricuter 9 ай бұрын

I think the temp gun is accurate because I tested it out by pointing it at my thermostat and the temps were about the same. I think the longer you leave your heat press on, the hotter it gets. I would try upping the temp on the control if it's not getting hot enough. I doubt it'll ever stay exactly at the right temp but if you can get it within 10 degrees I would aim for that

@Ringolero 8 ай бұрын

I swear Vevor gave everyone one of their heat presses and the funny thing is these are the only positive reviews I can find for them. 🤔

@Cricuter 8 ай бұрын

Just because they gave it to me for free doesn't mean I have to say it's good. I got a HTVRont Auto Press for free and I don't care for it. I have no reason to lie. But I can honestly say this is a good heat press.

@NailMommy 7 ай бұрын

I bought mine and I love mine. But i have only been using it for a week.

@michellegray6600 Ай бұрын

I have one of these and was wondering if the white or gray pad goes on top? Thanks.

@Cricuter 29 күн бұрын

my gray pad is on the bottom

@Sebstzz 17 күн бұрын

Hello! I have a couple of suggestions regarding this specific Heat-Press. Do you think this heat press would be good for specifically heat pressing namesets to soccer jerseys ie, names, numbers and patches etc?

@Cricuter 17 күн бұрын

Yes! It works great I use it all the time

@patriciareaves3796 6 ай бұрын

My husband just ordered me one so excited! But got a question can I use my ink jet printer with it? And what type of paper do I buy for printing on

@Cricuter 5 ай бұрын

You can use an inkjet printer if you purchase printable heat transfer vinyl such as this: amzn.to/3TWy0jm . However, I've never had good luck with inkjet ink holding up in the wash. I've made a few shirts and the ink always bleeds after I wash it. You're much better off with a sublimation printer. A lot of people will buy an Epson Ecotank like this amzn.to/48x8MN9 and swap out the ink with Hippo sublimation ink amzn.to/3O35E3b and sublimation paper amzn.to/48xAQzP. That's what i did. But Sublimation is like a whole new world of learning. If you're just getting into this stuff then I would start with cutting rolls of heat transfer vinyl (I love Siser Easyweed brand). Hope that helps and sorry for the delayed response!

@farkadsangisultan6139 5 ай бұрын

Hi, I’m planning to buy this machine. Since this video is 6 months older, how was your experience in the past months? Any pros and Cons you want to share?

@Cricuter 4 ай бұрын

I was just responding to a different comment where they asked me to rate it 1-10. I thought it would be easier to copy and paste my response for you: "I'd say like an 8. It works really good with temp and pressure and I've never had any issues with vinyl not sticking. What I don't like about it is that when you close the lid, the countdown timer doesn't automatically start counting down. You have to push the bottom button to get it to start counting down and sometimes I have to push it a few times before it works. I also don't like how it doesn't make a noise when it reaches zero. My heat press before that one would beep when it got to zero and count down as soon as you shut it automatically. Compared to my HTVRont auto heat press, this is way better. That thing has no pressure and nothing sticks on the first press."

@Bamfhammer 7 ай бұрын

Hey, on this heat press specifically, how stable is it when you rotate the press arm around?

@Cricuter 7 ай бұрын

Very sturdy!

@margomarroquin651 5 ай бұрын

When I went lol the y round, it fell back, so I have to hold it. I’m thinking about removing the rubber feet and putting a screw in it to screw it to the table.

@TheAwesomeSam 11 ай бұрын

I recently got this machine, coming from a 15x20 clamshell heat press. The thing that I do NOT like about this heat press is that the "shaft/pole" is very close to the press. I don't think there is enough room for a hoodie to be pressed on this machine. no matter which way you align the hoodie, the side where the "shaft/pole" is, is too close too the bed/plate, that you can't really lay the hoodie flat. have you experience this with the swing away heat press? any advice?

@Cricuter 10 ай бұрын

Swing aways don't have that problem! I can totally see how bunching would occur with a clamshell.

@TheAwesomeSam 10 ай бұрын

@@Cricuter would love to see a video from you on how you heat press a hoodie on this swing away heat press. Thanks!

@vickyrussell6778 11 ай бұрын

I always miss you live

@Cricuter 11 ай бұрын

I never go live. I probably should but I'm nervous 🙈

@vickyrussell6778 11 ай бұрын

@@Cricuter oh so it’s just replays I think you would be great Give yourself credit

@arnessad16 2 ай бұрын

Is this heatpress still working out for you?

@Cricuter 2 ай бұрын

Yes, I still use it regularly!

@MamaNitra 7 ай бұрын

I don't know if I am digging my Vevor 8 in 1! The control unit always flatlines out.. The reset button does nothing when I press it. There's little hairlike fibers that stick out from where the heat plate is on the press. Once the temp gets to where I want it, it beeps until I press the mode button. I wish I would've just gotten another Tusy!

@MamaNitra 7 ай бұрын

And the temp is always fluctuating.

@Cricuter 7 ай бұрын

I would email them! They have great customer service. The temp fluctuating a few degrees is normal but that other stuff does not sound right.

@marlonmurray2250 5 ай бұрын

Please rate this heat press out of 10? Overall functionality (1to10), you say ?

@Cricuter 4 ай бұрын

I'd say like an 8. It works really good with temp and pressure and I've never had any issues with vinyl not sticking. What I don't like about it is that when you close the lid, the countdown timer doesn't automatically start counting down. You have to push the bottom button to get it to start counting down and sometimes I have to push it a few times before it works. I also don't like how it doesn't make a noise when it reaches zero. My heat press before that one would beep when it got to zero and count down as soon as you shut it automatically. Compared to my HTVRont auto heat press, this is way better. That thing has no pressure and nothing sticks on the first press.

@Plumcrazie 4 күн бұрын

What model is your vevor?

@Cricuter 4 күн бұрын

amzn.to/3rd5jCH

@Plumcrazie 4 күн бұрын

@@Cricuter thank you 😊

@afrocentricity3 8 ай бұрын

It looks like glue on the metal part of mine. It looks horrible. I have the same one you have. My temp was already set to 365 when I turned mine on. I hope mine ain’t used.

@Cricuter 8 ай бұрын

Contact the company. I'm sure they'll send a replacement if you're dissatisfied.