I’ve just ordered a stud so this was really useful. Thanks for sharing😊

I like the spring washer idea Matt, may revisit the set up on my HW100.😀

Well that was simple. Thanks Matt. Much appreciated 👍🏻 #subbed

Good straight forward info, just aquired the .177 version, wish the rear stud for a sling was factory fitted as standard, these little things make the difference to what for most of us is a top of the range airgun.

Absolutely need the ‘Swivel’ bipod version, this one will do but swivel is better. AF

Great instructions For the uninitiated Harris type Cheers great video

Enjoyed the video, thanks for sharing. I use toy filler beads for my bag rest, no dust!

Nice tutorial mate 👍 bought a hw100 this eve. Laminate . Stay safe bud

Really useful video, what is the name of the bolt you used and what size is it, thanks

Good video, very clear instruction. You will notice under the bipod there are 2 tabs with a hole in similar to what the bipod uses to grip the stud, my rifle sling attaches through those I have the brand name bipod, however once when put next to a copy from China the only difference when we compared them apart from large price difference was sleeving over the springs.. which always (on mine) bunch up & look disappointing.

Top tip ,put some good quality thick electrical tape on stock where the bipod `pads` meet it or they will mark it😊

The legs should fold forward because if you have them folding backwards as soon as you put pressure into the rifle stock the bipod will collapse….

Your right everyone should have a whatist tin, I have about six of them! And there’s always the bit I’m looking for in one of them, we live in a too convenient throw away society.

Very helpful video Matt. Only problem for me is that I have the latest version of the HW100 in a KT version and when I took the factory screw stud out from the stock there was already a small black washer in the hole. I left it there and screwed the replacement stud in but when it was tight, the holes run front to back not side to side 🙄 so I can’t connect the bipod. If I remove the factory supplied black washer from the hole it looks like the replacement stud will sit too deep! 😩 Just wonder what you suggest? Should I still try a split washer instead of the factory one? Thanks

not sure if you got lucky with the split washer, the stud I purched from Fleabay will not line up properly not matter if using a split washer or numerous small shims. looking closely you may have used a larger split washer than I tried, your washer looks to be on the outer diameter of the fixing in the stock, the washer I used drops into the hole.

hi just saw your video nice snd to the point i know harris are expensive but you have a 1000 pound set up with a sixteen pound bipod on it china stuff is not for me thanks

What scope are you using

Hello Who did you order the stud from?? Mtia

Simples😁👍👍👍👍👍👍👍👍👍👍😎😎😎😎

Could you share the link or the name of the bipod?

Why do you need spring washer? No need for stud to be tight. Bipod will pull tight againt frame when tightening and also prevent stud from turning...

Its called a lock washer not a spring washer

Really disappointed mate! So the whole video depends on one screw, that you state "you can order". You do not state how it is called, or where it can be ordered. Mate, this whole thing is worthless without knowing how this special screw is called, and where you get it. It's like saying: "I'll tell you how this works, all you need is this thing, that you have to find out about yourself, and it all works". Well thanks mate! I never thought that having the right stuff for the mount could ever resolve the problem! Just a tip from an amateur: Telling the people about the most important part, the thing the whole thing is all about, would really be nice!