Thanks a lot! Was worried about that happening but not anymore

Does it fit prescription glasses under it?

@@212thBomb-squadsome wire glasses but not supper thick ones

are you able to ADS with them?

@@fischerb3829 from what I know so far, i4’s have a slimmer and more flexible chin frame so it would work best with either a low ak stock, or a slim magpull m4 style stock. It is still a little difficult to aim down irons, so I recommend a 20-30mm red dot with at least a low riser mount. I5’s are slightly wider and more firm in the frame so I recommend free balling your bbs if you use an i5.. basically yes, but with extra steps lol

@@Ghxsty.SkullDxg I have a pair from 2014 that are still going strong.. i4s are king! :)

damn what episode was that?

At around 10ft away nonetheless lol

well perfect example of what happens when you don’t have teeth protection I guess

Dude for real! Jet is kinda a border line toxic player 🤷

Jet has always seemed like a very passive aggressive person. And I do think he is kinda of a toxic player but that’s one thing I won’t hate on him for. That other kid knew the risk of playing this game without a face mask. And I’m in the heat of the moment it can be difficult to focus on exactly where you aiming especially when it’s as close as they were. The kid could have used anything other then the air around him to cover his mouth and I bet 100% he wouldn’t have lost his teeth.

Here the max fps js arojnd 380 fps. Will the shemaghs suffice

I managed to squeeze my glasses in my valken goggles

for glasses, the best goggles by far are the guard dog evader 2's They fit every single pair of glasses ive ever worn

Gaurd dogs I personally prefer the version 1 because the two separate lenses makes the goggles have less bulk in the middle giving my big ole nose more room. The version 2s(one big lense) put too much pressure on my nose and cuts off my airway 🤷

If your willing to spend a little bit of money. I would recommend the Revision locust goggles. They come with an insert that goes on the inside of the goggles that are meant for getting fitted with prescription lenses.

Tbh I just got once a day contacts to use, and they just make things so much easier

Why? The actual testing of mesh has shown, constantly, that there is almost no risk from BB fragments causing eye damage. To go to the science, the energy from the BB is dissipated upon impact, leaving almost nothing for any fragments to then move into your eye. It's akin to getting dust in your eye, so hardly sight-threatening. For my own experience, I've used mesh in airsoft for over 20 years and although I've felt shattered BB debris on my face and in my eye, it's never been more than an inconvenience, whilst I wipe it out. The benefit of not having to deal with fog is well worth the payoff. For the record, I'd lose my job if my vision was impaired, so I've looked into this seriously. In short, I think I know my shit, so just putting a blanket statement out that suggests mesh is dangerous is simply crap advice.

I know this is old, but I'm coming in to second this. I've literally tried to fog them up or create condensation by breathing heavily on the lens, and they are literally crystal clear still. Absolutely phenomenal

That's just not true, at all. The Rothco OTG's are the most comfortable piece of eye pro I've ever worn, both airsoft and real steel, and while they can be a pain to adjust sometimes, it's well worth it. Also, remove the filters from all four sides (just push them out with your finger) and you'll have INSANE air flow. I play in a CQB field in Missouri, it gets up to 105-110 degrees inside the field and I've NEVER had a fogging issue with the Rothco's.

No

@@totallymirage9513 gonna have to try this

@@totallymirage9513 How safe are they? I ordered a pair, and I am very nervous. It is my first time playing airsoft, so I wanted to get a good pair. Are they very safe?

I mean, if he said in the video, I trust him more then reviews, besides, you can always just shoot the visor to test

Id defenitly go with a dye. I4 is also great

Don’t. It’s awful, absolute waste of money unless you do cosplay or a cool shelf piece. It’s completely impractical for real Airsoft and most fields won’t even let you use it

@@BraydenGlascockMedia Ok would you recommend another full-face helmet possibly under $100 bucks or close to that price?

@@benjaminhinson3780 full face options are honestly pretty crappy. I know Matt brought them up in this video but that only because they exist. They’re not practical. There’s a reason why they’re “unique” and that’s just because no one wants to use them because they suck. I posted another comment on this video giving my top recommendation for face protection which is a helmet/goggle/mesh mask combo. It’s the most comfortable and it never fogs. Trust me, I tried buying one of these cool looking options and they’re really more props than they are practical. They are a nightmare to actually play with because you literally cannot use your gun properly with them. Sometimes you just have to learn for yourself, but I’m telling you, any mask that has a molded cheek weld is not practical. This goes for full masks like the iron warrior, the full face mesh, the fiberglass masks, even the half face mesh masks. The best option is the soft cheek mesh masks with goggles like he showed in this video. Also not to mention in all the full face masks, the lenses fog up really easy. Look for my other comment for a full break down. But what I use are the matrix GX-1000 goggles ($30) (they’re slim and have interchangeable lenses and they have never fogged on me, not even once) with a matrix soft cheek mesh masks ($12) and literally any type of FAST/bump style helmet (around $40) but you don’t even need a helmet. Also, wear a headband to keep the sweat from getting into the goggles seal to prevent sweating. I’m telling you, this is the absolute best combo for playing. It’s functional, practical, comfortable, you can shoulder your gun, and it doesn’t fog. I hope this helps. Ps if you see any kind of cool or unique looking mask, like I said before, there’s a reason why they’re unique and you don’t see them very often. You might think it’ll make you look cool, but if they looked cool and they were actually good and functional, everyone would use them. There’s a reason why people don’t use them. Hope this helps!

@@benjaminhinson3780 if you really want a full face style mask. Get one of the Dye masks like in the video. The problem is they’re they’re expensive. Like I’m the video around $140. The goggles and mask that I showed you is $42 combined, with a helmet It’s about $82 but honestly you can probably find it all on Amazon for even cheaper. I just don’t want you to waste money on one of those “unique” full face masks and then not have fun playing because it fogs up and you can’t aim your gun.

@@BraydenGlascockMedia Ok thanks.

EMG / Daniel Defense Licensed SOPMOD Block II that has been upgraded by EPS - www.evike.com/products/96128/

It mainly depends on how much you're willing to spend, as well as in what other gear you might want. In general, a paintball mask is a very good option if you want full face protection. They're easy to put on, can be fairly cheap for what you get, and gives hard protection for your whole face. But they are known to be incompatible with most kinds of helmets, so if you want a helmet you'll need something more low-profile. The goggle and mesh mask combo is the cheapest full protection available as far as I know. It's what I use, and what you'll see a lot of airsoft youtubers use as well. One of the main advantages is that a mesh mask doesn't stick out from your chin and so won't get in the way of aiming down sights, which is a big issue with a lot of full-face headgear. Speaking of cost: do note that there are many cheaper options than what's listed here that are still reputable and reliable. Once you go over, say, 20-30 dollars for goggles, what you're really paying for is the comfort, the anti-fog as well as various other features such as swappable lenses. But any goggles can be anti-fog treated, so you don't really need to go premium if you don't want to. Anyway, hope this helps.

The DYE masks work well for most frames - www.evike.com/s/?q=dye&x=0&y=0

Look into SR Union, my guy. They have a couple super cool helmets, and an armor kit that mounts on a JPC

@@dappernecromancer5364 wish they would sell stuff in store they only are an online type of firesoft thing

@@dankdaze42069 well if your in california you can try it out at evikes outpost in Ontario

Hello! Check out these "TOP 10" videos we have created about AEG's - Matt's Top 10 - kzfaq.info/get/bejne/e899q5V_nK_To4k.html Matt's Top 10 under $250 - kzfaq.info/get/bejne/btl4iM9yyNLHlJs.html Jet's Top 10 - kzfaq.info/get/bejne/rdCYpbKgubmzhYU.html Ryan's Top 5 - kzfaq.info/get/bejne/hs6Vpb2CmZPdpWw.html Mason' Top 12 - kzfaq.info/get/bejne/rMiUidenma_Tgok.html

The lenses are Z87+

Rothco OTG - www.evike.com/products/85884/ Dye mask - www.evike.com/search/?search_in_description=1&sort=3a&keywords=dye&x=0&y=0

We recommend either the DYE mask or the Rothco OTG, or the ESS Flight Deck with perscrip. inserts.

How does it do with fogging?

We recommend the Dye masks - www.evike.com/search/?search_in_description=1&sort=3a&keywords=dye&x=0&y=0

There's generally just not any point having mesh goggles. As said in the video, no kind of mesh works as reliable eye protection due to bb shrapnel being able to fly through. Also, having paint from mesh masks blown into your mouth from the impact isn't unheard of. So, even if you wear mesh goggles you still have to wear regular protective goggles underneath those goggles. Correct me if I'm missing something, but that kinda defeats the purpose.

Because you spend $150 that lasts you your entire time of playing airsoft instead of spending $60 on the goggles, $15 on the lower face, $80 in fog solutions, then a constant cost of anti fog solutions after that because it's not a one and done deal.

Yes

I like my teeth.

Neck gator and matrix teeth protector

@Wayward Airsoft I have that and now a weird rubber guard that covers my nose and mouse. It's supposed to give shape to masks but works great for airsoft