It's 2019 and this video is still relevant, I recently purchased a CCO1 Pajero and the YR suspension kit and your video series are making this build seem effortless! Thanks Matteo!

Gotta say mate, you make top videos. I really enjoy watching them when I'm supposed to be working... I love the way you don't faff around talking in circles. No wasted words, and all very informative, I'd easily recommend you to any rc newbie. Actually I'm an rc newbie, and would love to see a "Matteos rc for dummies." Please keep it going, love the channel, thank you.

Hi Matteo, another excellent video, love the yeah racing upgrades. I treated my cc01 to the ultimate upgrades I can find. I got it from Taiwan, complete front end, including actual brake hubs and the complete rear end, axle with lockable diff, 4 link suspension, brake drums, etc everything needed to make it a roller, except shocks. It's been on 2 years now and is weathering up nicely. It was quite expensive, but really worth it. I love the CC01S, my favourite off road vehicle, and now that they are doing proper life like rc trailing and not the ridiculous rock crawling class in the off road events, I would take my CC01 and join in now, especially with the alloy upgrades, makes the playing field a bit more even. Well, loved the video, looking forward to seeing what you get up to with the body, and see the running video. Oooooh yeeaaaahhhh 😎 👍 👍 👍 👍

Great video. I just bought a cc01. I did install a hot racing 4 link on it. The video had lots of information . Thank you for the great video 👍👍

What a coincidence it is that I just bought a cc01 chassis. Still learning its ways! Awesome upgrade although it adds more surface area on the bottom of the rear axle. Very nice scale chassis!

Klasse erklärt Matteo! Wie immer! Ich bin auch sehr positiv von dem Kit überrascht. Ist das erste mal, dass ich wirklich das Gefühl habe, einen CC01 ohne Spiel in der Lenkung zu besitzen. Gefällt mir sehr gut! Daumen hoch!👍

That's the nicest steering bellcrank I've seen for the CC-01. I've tried several in mine in attempt to reduce the slop, and the YR seems to be the tightest of them all. Thanks for sharing Matteo!

Cool video, keep up the good work. I like the alloy bearing steering set & especially the upgraded rear suspension.

Those YeahRacing parts are simply Beautiful!! Especially with the shaved edges!

Thanks Matteo for this great video. I'm already ordered same parts from link bellow this video on me CC01 😉.

This makes me want to get a second CC-01 with the stock steering setup and try this kit out. Great video!

Very nice video. Looking forward to the Pajero video. Thumbs up as always!

Another great video. I don't even have a CC-01 yet but you make the video interesting to watch.

Thank you for posting. I am just about finished installing the hop up your video make it a breeze.

Sehr cool, Matteo!! Super Video aus Deiner Garage, wie immer! Mein schwarzer CC-01 Pajero mit allen möglichen GPM Upgrades und ich, wir freuen uns sehr auf eine gemeinsame Runde mit Deinem neuen und den direkten Vergleich zu den Upgrades von Yeah Racing... 🚗🚙😉

Awesome video, just like all of your cc01 videos. This is tempting me to get a yeah racing hop up kit for my Isuzu Mu cc01!

Very nice! I like the steering rack it has full bearings on all moving parts Unlike the GPM one with bushings I have on mine that now got a lot of slop from the 2 brass bushings that ride in the aluminum that wore out a bunch now.

SWEET! i'm looking at the cc-01 chassis right now..not sure what body to get yet

Excellent job !! Great upgrade !!

Very nice video! Makes me want to go back and play with my CC01 again :-)

Excellent video. Well filmed and informative

Love your excellent videos...I have always loved Tamiya products...think I will start me a new build.

Hi Matteo, very very nice upgrade. I like the 4 Link rear suspension too much... waiting for that Pajero! Thanks again for sharing your videos.

Nice video. I got a CC-01 for Christmas and just bought another one. I think I will do this upgrade.

Great video. I'm looking to get a CC01 Bronco. I like these upgrades, I'd have them in silver. Also with the metal axles too. Look better, will be stronger and no so easily scratched and marked and so easier to clean.

Very well.done clear and easy to follow thank you you putting this video up. It's a huge help. Thank for your time ✌

Very informative Matteo !! I've just orderd upgrade !!

You always make great vids! good info.

Always full of info Matteo, thank you.

Hello matteo your project is exelent the car has now great traction and now Go to test run the car.👍

Very Cool Matteo. This is great information on the CC01. I'm looking at doing a new Landfreeder.

Nice work. I am looking forward to watch your Plastic body Pajero with the great cc01!

woaw , great job , i hoppe to see it in action !

Amazing video as always and keep making more videos 👍👍

Great video! I am subscribing!

Hi Matteo, like this video so much , I've just ordered one of these for my cc01 wrangler jeep that just got offa eBay. Oooh yeeeah, to yeah racing lol 😀👍👍👍

Nice tuning, dude! Instalike!

Interesting upgrades, Matteo. I bought only the steering upgrade for my CC01 to give a little bit tighter precision.

Tolles Video ist echt toll geworden!

excellent video. nice cc01 great look. thumbs up and great work :)

have you ever put a gear reduction on a CC-01 chassis? , they seem to be geared too high for crawling, I installed a hpi 7 to 1 gear reduction unit and its too low

Awesome improvements!

Always wanted to have this but haven't seen anyone build it clearly. thank you

Great work bro👌

Very cool ! I will try it! Thanks

Nice conversation, good job brother 👍 👍 👍 👍 👍 👍 thanks for sharing 👍 👍

I might have to get a new tub and this upgrade. Previous owner chopped up the front to mount a forward facing servo...

Really good video ! i love it : Great Work

Hallo Ich muss schon sagen das das YR Conversionkit fast schon ein Must-Have für jeden cc01 fahrer ist 🤔

looks great , awesome video

Looks great. The rear end has made a huge difference also with your barrel shocks . The extra flex with the centre boggie would help a lot. I'm guessing the adjustments are for long and short CC01 chassis's? AX30860 AX30860

do the aluminium parts weigh more than the plastic stock ones? i like these videos now i want a cco1 !!

Super schön gemacht.

Nagyon tetszett SOK ILYEN JÓ VIDEOT:)

Great video on this conversion kit, what motor are you using on your cc-01.

Thanks matteo, for a norther great instruction video. I have two cc01 chassis who can juse these upgrates.

I love your upgrade/conversion videos. I did an upgrade 1-2 years ago on my Amarok, following your video...think you used GPM parts then? You even had to use your dremel on same place for the steering links, and so did i... These once from Yeah Racing has a better "look" i think...looking forward to the "body video"...you`re great Matteo..keep them vids coming..

Matteo, what is your opinion on how the front suspension and steering compares to the GPM you installed on one of your other cars? Better than the GPM?

Hi Matteo, thanks for this video. Will the cc01 work better than an mst cmx with this modification?

Do you recommend the 4 link rear end or the RC Stroke Extension links from Tamiya themselves?

Could you use this conversion kit along with the stroke extension?

Sorry to hassle you mate, but would these bits be compatible with the g6-01? Have you already, or will you be doing a similar video for a konghead? Thank you again.

Matteo, how does this Yeah Racing kit compare to the Tamiya CC-01 Stroke Extension Link (Tamiya Part No. 54519) you used in one of your videos? Which one works better for the rear?

Very Nice good vídeo. greetings from Brazil.

How is the steering compared to the GPM? Any fitment issues or slop? The GPM one is garbage and I am thinking of using the YeahRacing set up instead but I'm afraid the quality might be just as bad. Wish Tamiya had a hop up for this.

Very good Matteo, I have been searching for this upgrade for a few weeks, can't find one anywhere.

From where i can buy this

Nice conversion. Does fitting bearing races make the chassis less reliable if wading, are plastic bushes better for wading/water?

Matteo. Have you ever tested any of Traxxa's Slash trophy trucks? You know them? In such case, what do you think of them? I am considering buying a 2WD Slash.

а траверси неможно було поміняти сторонами, щоб були з верху відносно піддона?? нашо боло піляти пластік???

And, have you also tried Tamiya's "TGS" series glow-engine cars? Would you please give me your opinion on them?

Hey, it looks like this gives you a bit more front travel, while also maintaining camber better? Great vid, thank you very much!

Hi Mateo, nice video, one question, would you recomend me a dealer where I can get that Yeah Racing conversion kit?, here in Mexico have no dealer.

Very nice, I ordered one two days ago, but is it compatible with the arm extension kit by Tamiya? I hope so. Anyway very nice tutorial as usual you're the best

Thanks for this video

Hello, I want to know what model your damper thanks.

Matteo - what thread lock do you use? Thanks.

Nice! Hi buddy.

Are you going to put the essentials kit on the longheroni conversion? Im building the longheroni kit kit now after seeing your video.

Wow this totally changes the CC01 chassis for me. I need one now. Does anyone know of any custom bodies for this chassis?

Is macin ko kaha se liye

Fantastico!

Excellent video but do you know where to get that kit in silver or black??

cool

Very nice !!!

Did you have to shorten the drive shaft or buy a new one? I bought the same Aluminum Essential Conversion Kit as you but it don't fit the same.My drive shaft seems to be longer.If you did buy another driveshaft can you please put up the link for it.

Couldn’t you just installed the steering links on the other side of the steering rack. And on top of the steering knuckles for clearance?

hoi Matteo, super eine gute Anleitung zu Montage¨

Nice Video

Do you know if they have a kid for a king black foot RC truck can you please find out in let me know and let me know how I can go about getting it I am looking for front end parts for my king black foot thank you so very much for this video it helps me a lot if you can find out for me For let me know how I can go about it thank you again

Escuseme that kit include arms superior suspension front ?

Would you say this is better than gpm racing conversion or not ? Would love to hear your opinion.

Hi what is the Spring and amortisseur ?

We have to cut a piece, I don't like that... Is it possible to find thsi piece already "cut off" ?

Better than Integy ever will be parts wise.

Mr. Matteo is there anyway you can send me this music?or a link maybe.i really like it!

Great video matteo do you no the price of the kit

very nice

Qúa hay Em ơi

mantap