Great to see you doing something with wood again..

i started watching your videos in winter of 2014/15 and have had a wild crazy journey since then. a lot has happened in my life. that has nothing to do with you and all but watching your videos again after 4 years of insanity is strangely comforting to me.

It would be awesome to see AvE take these plans (or any of your plans) and run them on his community CNC. It would be the greatest Canadian creator collaboration in history.

Excellent solution - work with smaller projects - the tractor shed was the straw that broke the camels back! Thanks Matthias - we were missing you and your wood projects.

The king is back!!! While you have been away from YT i’ve lost the meaning of watching videos. Tried others, found out that your projects are the only ones worth watching. You are a source for true inspiration. Thank you

Clearly I'm getting old because I sat here through the first 7+ minutes thinking "damn this is familiar ..." and then you showed the bandsaw cut version and it all came flooding back into memory. :D

Next project: Wooden laser cutter

This is a free plug for you. I just purchased your air engine and original combo lock plans. The Sketchup drawings, support files, and information are really good and extensive. Even the website is well done. And I find the Sketchup files a good way to learn how to create drawings and lay things out. I really recommend people have a look. They are low cost and informative even if you never make the project. This will probably be the case for me.

I was just admiring that beautiful piece of walnut you were using as a work surface!

Wow!!! Is there anything you won't make from wood????? Ingenious.

Great to see your keeping busy. Mind you don't over do it. 👍

Really good plan, pivoting to projects that won't cause you health issues! I like it.

Nice to see you working again even if only in a minimal capacity. I hope the tendonitis goes away soon! I have dealt with that before and it is no fun at all!

I love these kind of projects! Hopefully they are good for the tendinitis! Thanks, as always!

He's evolving. The future hold no chance against Matthias.

This blokes a bloody genius! excellentay Matthias.

Matthias, With your ingenuity and background in making marble games and machines, you could do some amazing Laser cut / Wood kits. One thing is the final machine/game, but putting it together is half the fun. My kid would love this, so im deff. getting this lock so we can make it together.

Really appreciate you keeping the project videos coming.

Glad to see new project videos. Hope you're feeling better.

Seeing you drill wood on top of that nice table scared the shit out of me... 😅

Carpintero nivel dios !!! Gracias por compartir

That's a really nice piece of walnut!

You gotta send these to LockPickingLawyer and BosnianBill, give them a real challenge after all them Master Locks 😜

Are you crazy? Posting the combination of your lock on the internet?

مبدع في كل مكان في العالم اتمنى لكم التوفيق والنجاح في كل وقت Genius and creative

Impressive to make something so complex like this and not have the option to reprint any mistakes... It takes me at least 3 editions to get a complex piece functional. Nice work bud.

hope your feeling better

Great project!

Nice. I myself prefer the rounded smoother version. Thanks for the video.

I'm amazed you're not selling this as a kit pre-cut. Either out of wood or acrylic, it would be an awesome way to earn some income while you are recovering from the tendonitis.

plans instead of pans?.....end of video :P Glad the videos are still coming.

And Matthias still has ideas :))) So it's good :))))

I'm glad you uploaded a new video, thankyou!

Rachel I think Matthias finally wants a laser cutter for Christmas! MIght as well get him a 3D Printer too and some Wood Infill filament! :)

I get the feeling were going to be seeing more laser cut builds. Totally understandable given @matthias' current health problems (get well soon!)

I genuinely think you should get a cnc machine or make one(CNC router preferably). I know you are a little icky about them but you are more than qualified to use them and what a brain like yours could do with them is unimaginable. Also having one could help you make some more content while you are healing, as most of the work is done by the CNC.

hello from the netherlands!

You should sell MW branded precut wooden projects for kids/young people. I bet they would sell like crazy. I am looking forward to see those projects in every home store in north america.

This video made the win compilation December 2018 at 4 m in 35sec. Congratulations

Customers can add the edges that they desire to the plans before printing. "Burnt" smell can be sanded off and sealed with varnish.

Thanks, hope your healing up.

I think they're both nice. They both have a certain charm that the other one doesn't have.

Thanks for still doing videos sir.

I think it is a combination of factors that locked my attention to this video.

Suggestion for future projects: Since you can't do big stuff, go small. scale RC aeroplanes. Built with balsa wood and thin ply, not the whole polyester and foam thing. They would be works of art!

Very cool. Thanks for sharing the files!

Made one in school when we first got a laser about 8 years ago, very similar wish I still had it

Wonderful, wonderful👍👏💐😙

I really miss your more regular videos

if your tendonitis doesn't allow for big projects like bandsaw version 1000 just do little CNC/laser cut projects they're just as enjoyable to watch

looks nice. i think the laser cutter one would be better for mass production than the other one. and if you work at the edges you could make it like the first one.

Matthias is back!!!!

I'll have to agree with the folks on instagram. I prefer the non-burned version.

You are amazing!!! Even if I don't have a use for or need what you are building in your videos they are always worth watching. It's so gooooood ! :)

Very good

Awesome!

Uses state of the art technology to cut pieces for an intricate mechanism out of dead-tree-carcasses - a 10K year old building material :) Still waiting to see the wooden angle-grinder ;)

Should send to the locksmith lawyer KZfaq channel

I had to use a laser cutting service while studying (about 10 years ago) and it was horrendously expensive... I hope that has changed with all the online services and 3d printing and so on

It is amazing what you can manufacture out of wood. Congrats, man.

I like the new shop

I'd love to see these on tree houses and sheds.

While there wasn’t much time difference for one of either, if you wanted to make 20 of them the laser or a router CNC would be the way to go. But, no doubt about it. The bandsaw version looks better.

building this combination lock is how i found your channel originally

Next project ....wooden fishing lures

Great! Now send it to @LockPickingLawyer.

turn to the metal side, use the cnc, use the force

Well done, man

Mattias du bist ein Künstler .Gruss ausDavao8000 F.26 Apr. 0957&

Cool project!

Très intéressant merci et bravo salut Jeannot 😉🛠

For all the math geeks out there, it would seem that we have been referring to these type of locks by the wrong name. According to my undergraduate math professor, we should be calling them "permutation locks," because there is an order that has to be followed for it to open, which is not the case with a 'combination.'" But calling them permutation locks would only lead to a lot of head scratching and misguided corrections.

Thanks for sharing and showing that

Du bist der Beste

If you were to produce this on a CNC router table you could get the nice edges, no burnt smell either.

Super!!!

The benefits of having your own CNC mill or laser cutter is obvious, you will find the design mistakes right after you cut your first prototype. Unlike the laser, the CNC mill does not burn the wood, however, you have a much larger curf to account for when producing the G-code.

how cool

I never liked the look of the toasted laser cutted edges. Thanks for sharing !

Good sir very brain

But can BosnianBill pick it.

Send one of these to the lock picking lawyer and let him critique it ;-) I'll tell you right out of the gate though he's going to fault you for not having false gates :)

بسم الله الرحمن الرحيم لا اله لا الله محمد رسول الله Matthias Wandel This is a great job and you are very well respected for your interest

What kind of pans are you selling? Frying? I could use some good pans.

Recomendo Muito bom Very good 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷👍

I like the old one much better.

good!

nice will get those plans for xmas and use my x-carve

I think if you extrude the lasercutter shapes, you can also 3d print them.

Nice... have you thought of making the dowels on the laser? They should work fine square.... I did that on a couple projects and it works great...

You actually have more relaxing voice than Bob Ross

Send it off to 'the lock picking lawyer'

Ciao,bravo good job

I wonder if you put wax on that dowel if it would still stick if left in while glue dried.

Now to build my own CNC wood router so I can make this.

Maravilhoso trabalho

So Matthias, is laser cutting your answer to woodworking but in way that's gentle with you tendonitis? It seems so, and I would probably resort to the same thing if I could (if I was in your place) Good to see woodworking content, but we're always worried about your condition lol.

Hello, Congratulations on this new achievement. I imagine you designed this object with Sketchup as usual. Can you tell me how you manage the arcs of a circle that are not on Sketchup? Thank you. Thank you.

genial

Matthias, for your next project could you please build us a wooden laser cut version of Babbage's Analytical Engine?