That is so cool! I've always wanted a pantograph for my Foredom or a pin router. Thank you for posting this.

"9/64th of an inch"... rofl, I am glad to hear Matthias saying "Inches are kind of ridiculous". greetings from France and the metric system! Amazing work Matthias! Love your channel

You make things look very easy...I love woodwork and you are my hero :

I'd really like to see you or Pat in action doing inlays with that thing. Another great video!

Any normal corded or cordless Dremel (maybe not the really low-power engravers or tiny battery powered one) will have the collar that removes to reveal that thread. This thread has been a standard interface for Dremel accessories (Drill press stand, router base, 90deg adapter, flex shaft, chainsaw sharpener, etc) for decades, going back at least to the 1970s if not earlier. Most Dremel clones use the same thread as well.

Idol, Im from the Philippines... i always amazed of your wood working, i rely like your pantograph.

That is a older model dremel , I have one an that wen wet grinder sharpener as well. Very nice Matthias project! best

You make things look very easy...I love woodwork and you are my hero :)

Nice of you to build Pat his own pantograph.

Am serjously in awe of this guy's skillz. Oh, hell, may as well admit it, am serjously in awe of his life. Get a great deal of enjoyment from this channel. Maybe evan learn a thing or two. Long may you post, Matthias.

honestly, i was wondering when will use dremmel for one of the projects. great video, thanks Matthias :o)

You are a good wood worker keep up the good work

Acrually, a casting would not have worked for that part. The points are sharper than the tool, so you HAVE to go outside a bit to carve out the points. If you go with the casting method, you can't fit a part like that (unless you hand-rework the cavity with a small chisel afterwards).

Idol, Im from the bangladesh... i always amazed of your wood working, i rely like your pantograph.

All cm, just like it says in the plans.

I don't remember. I got it right but misspoke one of the numbers when I shot the video.

I'd make a collar for the dremel to fit the original hole thus giving a quick option for usage of both for very little down time also pos a rubber sleeve to hold the dremel tight excellent work

Excelentes tus trabajos. Te felicito. Desde Medellin Colombia

I wonder what bit you are using for these fine cuts. Great work as always matthias.

I look forward to each new video from you, thanks Pavel Czech republic, europe ;-)

Yes, and to xrerox something is also technically wrong. But that's how we speak.

I like your work man...!!

so will you be doing some inlay videos ? i'd love to see some, it's amazing what some people can do with it

For your answer, watch the video.

Very good your work, you would have this project in pdf file with the measurements of the parts?

Watch the next video. The true potential of this comes in using it in conjunction with Matthias's Big Print program. You may be able to get a little closer (not much though!) by making casts of the original parts (but what a lot of work!) but this system and Big Print can do way more and way easier. Apologies to Matthias who has been resisting my pushing to "push" Big Print.

tu restes et tu demeures un Grand.

Matthias did you think of using the flex shaft attachment for a multi tool? That way it wouldn't tie up your Dremel permanently. (Or would the flex shaft hold up to those stresses? )

I've always thought this would be great for guitar inlay. May have to make one, to inlay my logo with MOP!

about 15 mm high

Love the mount. What is the advantage to the dremmel as oposed to the original tool you had?

That would be quite difficult to get right.

could be done, but a copy carer would be simpler.

For smaller applications or possibly for people who don't have a router.

Great video as always but the tool is called a mufti function rotatory tool. Dremel is a company.

Is it possible to make a smaller size one? My space is pretty limited,I might try and expirement based on the overall design.

Cool, another neat project. Here's a challenge. A 1:1 mirror image pantograph. I want to make foam wings (insulation foam) and foam scaled hulls. I can shape one side by hand no problem, but then I'd like to get an opposite-symmetrical wing for the other side. I'd like to be able to run a guide along the original wing and carve the opposite side wing. (xy, but z vertical only--meaning the underside of the wing isn't needed--it's a 3d relief problem, not full 3d) A symmetrical hull is a different problem. With the wing, the second wing can be anywhere. With a hull model (12"-24" long) ideally they are very close together--though gluing two halves wouldn't be a problem.

I hope some day have the half of your wood skills

By the way, do you think you could do more videos with Pat, like showing his using the pantograph for inlay?

water is an activator for gorilla glue. it speeds the process up tremendously.

Have you ever considered mounting a Dremel on a pantorouter to experiment with smaller joints? Or for that matter what about making a miniature pantorouter? If anything it would be a fun novelty to have in the family of pantorouters.

Let you imagination fly, noone said it's an advantage. I guess it's to be able to use completely different router bits/grinding tools, maybe to engrave glass for example. There are also dremel router bits, that are much smaller than regular router bits, very uselful for fine inlays aso.

Mathias, have you ever built a tail vice?

You said the Dremel would work with a 56mm hole and so you set your compass to 26mm. Did you say the wrong number or did you want a 52mm wide hole so it held the Dremel more securely?

I'm glad that I never have to use inches, ever.

Inches fit better with digital than meters, or rather divisions of two work better than divisions of ten.

i know you did this a bit ago but would you supple the plans?

Matthias Hi, love your videos, you are a true inspiration to me. I Have a question thought, when you draw lines and hold measuring tools how much or little pressure do you apply to be accurate? I always struggle to get it accurate

Thank you.

Muy bueno, gracias

dónde se consiguen las plantillas, Saludos baja California Sur

This is what happens when you let you children play with a lego technics, pure awesomeness

I am in agreement and like it when we are precise. Not everybody cares though and in this case, most people will know what kind of tool he is talking about even if he uses a brand name from a reputable company to describe a Craftsman multi-function tool.

Can you suggest me the another type of motors or how many type of motors that appropriate to use in this work? Is this type of machine can copy a 1:1 scale? how? Thank you so much.

OK. I was thinking that maybe 2mm smaller on each side would just create a strong hold on the Dremel. Or crack the casing.

ever thought of a double linkage so you can do 1:1?

Look up the concept of 'generic trademarks' or consider the use of 'hoover' as a verb.

wish the U.S. would have gone metric back in the 70's. Would make all this much easier.

Will this new design work for a Dremel 4000? What about the Dremel flex shaft? Also, can this pantograph be configured to use a 4:1 ratio rather than 2:1 or 3:1?

I was just thinking that you could probably set up a wood burning pen with this.

put the gorilla glue bottle into a zip lock bag and then into the freezer to extend the shelf life

It is the same as calling a twisty puzzle a Rubik's Cube.

Ese letrero no deja ver el video k está publicando está muy interesante grasias Matis

why not make a couple of clamp-able donuts to fit the dremel INSIDE the Bosch rig, like a collar in a collar.

como te contacto me interesa los planos

What glue are you using?

Envieme los planos porfavor del Pantografo soy de Chile y necesito Construir el Pantografo se agradese toda ayuda gracias

Just wanted to let you know I went to the web site to look at the pictures for the temples, the pictures for the templates are not legible. I cant see the measurements, and the measurements I can see I don't know if they are mm or inches! Do you have any other tempests!

Can you set it for 1 to 1?

gute arbeit, mathias

Hi. Please tell me where do you get the drawings with dimensions to cut the parts?

hello , the dollar this pantograph plans ? as I can do to buy it ? I am from Argentina

AKA nyquinst's vice?

gracias por enseñar

gracias

It can't do 1:1

Hello Matthias, the plans and get out if I can pay by western union, I'm from Santiago, Chile, thanks

Gostei muito gostaria muito deste projeto como faço para conseguir. ?

isn't a dremel just a weak router you actualy hold in one hand?

Muy bueno,,..... Vende el plano ,? valor $ .?

Necesito los planos en Español para poder haserlo

شكرا

And we also ask for a Kleenex when we mean a tissue. and people in Florida ask for a Coke when they really mean a soda or a pop or a soda-pop, and we say Frisbee, even if it is a different brand... need I go on?

How to download 3d pantograph machine dimension

How to download ppt for dimensional

Quiero uno igual $precio

Please do

ups... well at least you as smart as i hoped you are.

Because it implies that Matthias is stupid for calling it a dremel. It implies he doesent know what he is talking about.

Your misogyny is completely inappropriate. Your put down of women shows your lack of respect for over half the population of the world.