Mavic Mini Propellers (Inspect, Remove and Install)

Рет қаралды 96,756

4 жыл бұрын

In this video I emphasize the importance of regular inspection and a pre-flight check of your DJI Mavic Mini’s propellers to maintain safe and stable flight. I go through many of the signs and and symptoms of bad propellers and I also go in to detail on how to removed damaged propellers and install new ones. Lots of tips and important information for any Mavic Mini owner. As always, thanks for watching!
Mavic Mini Videos:
Update - Is This a Fix? - • Mavic Mini Problem (Is...
We Have A Problem - • Mavic Mini We Have A P...
5 Things You May Not Know - • 5 THINGS YOU MAY NOT K...
First Impressions - • DJI Mavic Mini First I...
First Flights - • DJI Mavic Mini First F...
Music:
Epic-logue - Joe Bagale - KZfaq Audio Library
- My Main Gear -
✅ DJI Mavic Mini - amzn.to/2PcvG6l
✅ Canon EOS R - amzn.to/2XlJGeD
✅ Canon EF 16-35mm f/2.8L III lens - amzn.to/2J7Pncm
✅ Lowepro ProTactic BP 450 AW II - amzn.to/2Z5x91l
✅ Rode VideoMicPro - amzn.to/2BvkdJK
- Other Gear -
The drone - amzn.to/2PcvG6l
My big SLR camera - amzn.to/2BvREfi
Main on-the-go video shooter - amzn.to/2CTPeTF
The wide Canon lens - amzn.to/2BLndhW
Favourite small video camera - amzn.to/2DnR5Bf
My lavalier microphone - amzn.to/2BUvmTK
The audio recorder - amzn.to/2zaNyTN
Favorite action camera - amzn.to/2kBOprZ
My smartphone gimbal - amzn.to/2oPYG67
Current GoPro gimbal - amzn.to/2kzUp4s
The travel tripod - amzn.to/2kVBoJd
My go-anywhere tripod - amzn.to/2CTpOG6
Favourite SD/CF card reader - amzn.to/2zbmO5i
My go-to mobile battery - amzn.to/2Btklt7
Zoom H4N recorder - amzn.to/2MBUJN9
Smartphone - iPhone XR
DISCLOSURE: We often share products and services that we regularly use and that we think may be helpful to our viewers. We use referral links when possible and we may receive a small commission when purchases are made through these links. This comes at no cost to you but the small compensation we receive helps to support this channel.
As an Amazon Associate we earn from qualifying purchases and this is why most of our gear links redirect to Amazon.com. Well, that and we do purchase a lot of our gear through Amazon.
Thank you for your support.
#mavicmini #DJImavicmini #propellers

Пікірлер: 324

@jonathantruth 4 жыл бұрын

Quality content, good info! The first I've seen anyone get into this, and after following your previous issues I see how you gained a lot of expertise in this area. Thanks for putting this together.

@SteveCoutts 4 жыл бұрын

Thanks and thanks for watching!

@donspringer8234 4 жыл бұрын

As always, thanks. Very helpful. DJI is really bad about not telling people up front about how to fix things. I had no idea how critical the props are. You have saved a bunch of people from the grief of losing their mini.

@SteveCoutts 4 жыл бұрын

Thanks Don, I appreciate it. There definitely was a prop issue out of the gate for some but I don't think it's likely DJI will ever make some kind of statement about it. They will just quietly fix it.

@brandan648 4 жыл бұрын

It’s nice to see you back and this time with the mavic mini pretty awesome stuff

@SteveCoutts 4 жыл бұрын

Thanks Brandan!

@FamilyFreedom 2 жыл бұрын

Thanks so much for your help, a really simple explanation! 👍

@SteveCoutts 2 жыл бұрын

Glad it was helpful and thanks for watching. Cheers!

@mithusrpgteam 4 жыл бұрын

Thanks for all those info. Very nice!

@bamirsculinarydishes2565 3 жыл бұрын

Very clear, straightforward and helpful video. Subscribed! Thank u

@zenmasterjack3873 4 жыл бұрын

Awesome info. Just the tutorial I was looking for. Clear and concise as well. Subbed.

@SteveCoutts 4 жыл бұрын

Awesome! Glad it was helpful! Cheers!

@JuanCruz-mf6dw 2 жыл бұрын

Thank you ! It was very helpful

@SteveCoutts 2 жыл бұрын

Thanks for watching Juan, cheers!

@canadiandronepilot7535 4 жыл бұрын

Great advice Steve ! Cheers

@SteveCoutts 4 жыл бұрын

Thanks very much! 👍

@DonJoyce 4 жыл бұрын

Nailed it, Steve!

@SteveCoutts 4 жыл бұрын

Thanks Don!

@dronermx4317 4 жыл бұрын

Steve Excellent content!!! congrats!!!

@SteveCoutts 4 жыл бұрын

Thank you and thanks for watching!

@sanpol4399 4 жыл бұрын

The propellers in the Mini are kind of a critical part of this drone as we saw before here. The propellers really deserved a video about that. Great work, thank you for posting.

@SteveCoutts 4 жыл бұрын

Yeah, thanks! I felt the same.

@TechTravelWithAditya 4 жыл бұрын

This video was really helpful. Waiting for more Mavic Mini videos.

@SteveCoutts 4 жыл бұрын

Terrific, thanks. More are coming. Stay tuned.

@lebavu8260 4 жыл бұрын

I like how u quickly get to the points in these videos 👍 Subscribed!

@SteveCoutts 4 жыл бұрын

Cheers! I try to keep them concise and packed with info. Cheers!

@AlanPhotosVideos 4 жыл бұрын

EXTREMELY HELPFUL information, thank you. YOU have saved us all serious potential problems for anyone who is paying attention, so again, thank you!!!!

@SteveCoutts 4 жыл бұрын

Thanks Alan, I appreciate it and you're welcome. 😀

@mychannelforfun5523 4 жыл бұрын

Great information. Thanks!

@SteveCoutts 4 жыл бұрын

Thanks!

@brenocavala Жыл бұрын

Excellent content! Thanks from Brazil!

@SteveCoutts Жыл бұрын

Thank you and thanks for watching! Cheers from Canada! 😀

@michaelhiggins7365 3 жыл бұрын

Really excellent and detailed Prop Maintenance video. Thanks so much for this one !

@SteveCoutts 3 жыл бұрын

Awesome! Glad you found it useful and thanks for watching!

@shadowfaxproductions4787 3 жыл бұрын

Best video i found for my problem thanks! Subscribed

@SteveCoutts 3 жыл бұрын

Awesome! Good to hear it was helpful! Cheers!

@MultiBrando88 3 жыл бұрын

Detailed and informative, yet concise. Very well done.

@SteveCoutts 3 жыл бұрын

Thanks for watching and the comment. Cheers!

@philbrening6198 4 жыл бұрын

Again good content and informative. First impression...thinking mini props...is that we all know how to do props. You make us realize...with detail...how and why and where to best practices on mini props. I really like your detail as your hand landing offers the same level that we are now knowing so much more about the mini. I’m looking for more content from you and you do excellent work

@SteveCoutts 4 жыл бұрын

Thanks Phil, I appreciate it!

@rolandsr2728 Жыл бұрын

Thank you for this video! Been looking for this information all over the Dji Forum, couldnt find anything!

@SteveCoutts Жыл бұрын

Happy to hear it was helpful, cheers!

@skeeterman7144 4 жыл бұрын

Props can last many, many hours of flight. I still have original props on my mavic2 for nearly two years now. I bought extra props and never used them. Even so, preflight inspection is important!

@bigchristhemavicmaster2818 4 жыл бұрын

The Mavic Mini doesn't have the same type of props! They are literally paper thin

@sannic89 4 жыл бұрын

2nd flight and a few cracks on the props.

@rizen307 4 жыл бұрын

Thanks 😊 Steve it actually worked and u helped me so much

@SteveCoutts 4 жыл бұрын

Awesome! Good to hear! 👍

@rizen307 3 жыл бұрын

@@SteveCouttsAfter 1 year passed, I just wanted to tell you take care and you are awsome

@narekzolyan1610 4 жыл бұрын

Well done mate, like ur videos, very useful, thanks

@SteveCoutts 4 жыл бұрын

Thanks!

@michelmilek2891 Жыл бұрын

Great video, all questions nailed! Saved my drone life!

@SteveCoutts Жыл бұрын

Awesome Michel, glad it was helpful. Cheers!

@pablogalvz 4 жыл бұрын

Thanks! Excited to take my Mini to Mexico tomorrow and give it a real test!

@SteveCoutts 4 жыл бұрын

Good luck and safe flying! 👍

@iahtv8254 3 жыл бұрын

really helpful thanks for sharing

@SteveCoutts 3 жыл бұрын

Glad it was helpful. Thanks for watching!

@iahtv8254 3 жыл бұрын

@@SteveCoutts dji mavic mini user here from the philippines....i visited ur house and click the button bell too

@Ddrews-nf4gq 4 жыл бұрын

Thanks for posting. Good step by step instructions. Made life easy

@SteveCoutts 4 жыл бұрын

Awesome! Glad it was helpful.

@Ddrews-nf4gq 4 жыл бұрын

@@SteveCoutts Helped reduce the frustration meter after a few bad takeoff attempts. Great video 👍

@raymondpenhollow8345 4 жыл бұрын

Great job! The blue material on the prop screw is thread-lock and it is one use only. I have worked as an aircraft and heavy equipment mechanic where thread-lock is used frequently. The colors of it correlate to it's strength and blue is the most commonly used color in my experience. The advice about changing props in pairs along with the screws is very important and should not be ignored. Thanks for the time producing this very informative video, Steve.

@SteveCoutts 4 жыл бұрын

Thanks and thanks for the thread-lock insider info. Cheers and happy, safe flying! 👍

@stevelynn4402 4 жыл бұрын

Great reminder Steve! As retired military, it was drilled into our heads to always perform a quick once over (service inspection or SI) before operating any type of equipment. Yes, these actions can and will often become mundane and seem like a waste of time. Human nature is to take a short cut and skip it. However, as you stated, these checks are simple, easy and take just a few seconds. Eventually, checks becomes a good habit and second nature. Otherwise, Murphy’s law...”what can go wrong, will go wrong”. At the end of the day, a straight upwards take off over time becomes a very slight off center take off hence the new norm. Before long...we think no big deal until it is a big deal. New subscriber ✌🏼😎

@SteveCoutts 4 жыл бұрын

Thanks Steve! Great points! I had acquired the bad habit of not checking the props often with my Spark because that tank could fly just fine with some pretty beat up propellers. Not so with the Mini. Cheers! 👍

@E85_STI Жыл бұрын

PCC/PCI always

@hjohnstone6921 3 жыл бұрын

I found this very very useful👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 Thank you, and by the way your dog is super cool 😎 x

@SteveCoutts 3 жыл бұрын

Thanks! Molly (our dog) says thanks too! Cheers!

@donovanw.2943 3 жыл бұрын

Thanks for the good info.

@SteveCoutts 3 жыл бұрын

Thanks for watching! Cheers!

@alfendelias166 4 жыл бұрын

Very Useful Information , Thanks alot Steve.

@SteveCoutts 4 жыл бұрын

Thanks for watching! 😀

@alfendelias166 4 жыл бұрын

@@SteveCoutts SUBSCRIBED

@djitechwithdave7685 4 жыл бұрын

I love the way you make you videos. 👍

@SteveCoutts 4 жыл бұрын

Thank you! I appreciate that! 😀

@djitechwithdave7685 4 жыл бұрын

I just bought myself the DJI Spark and I am very happy with it. It take great pics and videos. I am learning heaps from your videos and can’t wait till your next video comes out.

@SteveCoutts 4 жыл бұрын

@@djitechwithdave7685 Awesome! The Spark is a great little drone. I love mine and will continue to fly it. Thanks for watching and happy, safe flying! 👍

@directedxlarock 4 жыл бұрын

First! Always great content here! Looks like your really digging the mavic mini, how do you like the Dji fly app vs the Dji go 4 app for the Spark?

@SteveCoutts 4 жыл бұрын

LOL! Thanks Isaac! Yes, I am totally digging the Mini. I actually like the simplicity of the DJI Fly app. My biggest gripe is the lack of manual white balance control. Honestly, I could even live without manual camera control for video because EV and AE Lock are right where I want them. 😀

@chadgilmore5046 4 жыл бұрын

Thanks for the advice I am having that problem with my rear props at the moment 👍

@SteveCoutts 4 жыл бұрын

Thanks! Hope a propeller swap gets you up and running again. 👍

@photohuch 4 жыл бұрын

Great Job, Help me out a ton!

@SteveCoutts 4 жыл бұрын

Glad it helped! 😀

@Lemus009 3 жыл бұрын

Thank you very helpful

@SteveCoutts 3 жыл бұрын

Glad it helped, cheers!

@QUIGGS2001 4 жыл бұрын

Thank you! Very helpful. Just hit my two day old Mini off a wall about 1.5m high (thankfully). Its now banking foward when hovering, and Im guessing it's down the the scrapes on my props. Replacements ordered & your vid was very helpful.

@SteveCoutts 4 жыл бұрын

You bet! Thanks for watching! Yeah, the banking forward is definitely a sign some props need replacing. Happy flying! 👍

@360Fov 3 жыл бұрын

Was unaware of the marked/unmarked factor (100% entirely my own ignorance): after it took off but immediately wanted to fly upside down, I swapped the propellers to the correct position as per this video and it's flying with no problems. Thanks!

@SteveCoutts 3 жыл бұрын

Yeah, it's kind of an easy thing to overlook and the marking are so subtle. Glad you got it figured out. Cheers!

@CalEvans 4 жыл бұрын

Excellent video. Good content. Good production value. I never feel like I am learning WITH you but learning FROM you. 🙂 Cheers! =C=

@SteveCoutts 4 жыл бұрын

Thanks very much Cal, I appreciate the kind words. 😀

@theleoching 3 жыл бұрын

Thanks so much! I was having trouble with my prop replacement, turns out I had used an unmarked prop on a marked arm. Really appreciate your help!!

@SteveCoutts 3 жыл бұрын

Thanks! I am happy to hear it was helpful. Cheers!

@RainBitcoins 4 жыл бұрын

Awesome... Thx for sharing...

@SteveCoutts 4 жыл бұрын

Thanks for watching!

@dronerisephotography2378 4 жыл бұрын

Well done Steve.

@SteveCoutts 4 жыл бұрын

Thank you!

@SC515 4 жыл бұрын

I watched this before and still watched whole video tutorial. Good advice.

@SteveCoutts 4 жыл бұрын

👍 Cheers!

@UncleDVD 4 жыл бұрын

Hey steve! Excellent informative and entertaining content as usual. I notice you are using the stock DJI props, but I also really dig the red and white ones you featured briefly...have you been experiencing any similar difficulties/anomalies with those? Im keen to pick them up as well...did you get them online? Much love from Australia!

@SteveCoutts 4 жыл бұрын

Thanks! My wife gave me the red and white ones for Christmas and I have been using them since. They have worked flawless for me - no issues, no errors. Many folks have complained about them so I would be cautious. Really wish DJI would get in on the coloured prop game, it would make things a lot easier. Good luck!

@CoasttoCoastDrones 4 жыл бұрын

good info ..thank you sir !!

@SteveCoutts 4 жыл бұрын

Thanks Bill! I see you're a proud Mini owner now too. 😀

@CoasttoCoastDrones 4 жыл бұрын

Steve Coutts Santa didn’t bring the Skydio as promised. So this was to pass the time while I wait. Still waiting though! (Facepalm)

@freewill9325 2 жыл бұрын

I've learn a lot brother

@SteveCoutts 2 жыл бұрын

Awesome! Thanks for watching, cheers!

@frutotrelampampinos 4 жыл бұрын

nice!!

@Inatwiztvisuals 2 жыл бұрын

this video help me out thanks boss

@SteveCoutts 2 жыл бұрын

Awesome, thanks for watching! Cheers!

@SC515 4 жыл бұрын

Thanks man!

@SteveCoutts 4 жыл бұрын

Thanks for watching!

@cheftomvoigt 2 жыл бұрын

Thank you so much

@SteveCoutts 2 жыл бұрын

Thank YOU for watching, cheers!

@cheftomvoigt 2 жыл бұрын

@@SteveCoutts thanks to you, very helpful.

@mikek2879 4 жыл бұрын

Great delivery on your content. Nice tutorial on the Mavic Mini props. Noticed you are using the props with the red stripes. Another you tuber seemed to be having vibration problems with them. Any similar issues? Also, did you notice any prop noise difference with the red striped props?

@SteveCoutts 4 жыл бұрын

Thank you! Yes, my wife got them for me for Christmas. I have been testing them since and had no issues. Definitely quieter. No vibration issues, quality seems good, no errors in the flight logs - all good. I think mileage is going to vary on these though, lots of different "brands" offering the same propeller. May do a video after I thoroughly vet them. Cheers!

@alexhettich1999 2 жыл бұрын

Thank you 🙏🏼

@SteveCoutts 2 жыл бұрын

Thank YOU for watching! Cheers!

@gardini100 4 жыл бұрын

had my first prop change " i did store it wrong in the box " but thanks for info , but now all batteries are loaded and the weather is great for a little flight have a great weekend :)

@SteveCoutts 4 жыл бұрын

Cheers! Happy flying!

@jasonmedeiros7359 3 жыл бұрын

How did you store it?

@ser_skull8307 3 жыл бұрын

U saved me from £400. Thank you so much!!! I kinda scratched a propeller and put on the wrong propeller. Then it would take off.

@SteveCoutts 3 жыл бұрын

Glad it was useful and thanks for watching!

@ekodimanamana 3 жыл бұрын

thanks you

@SteveCoutts 3 жыл бұрын

Thanks for watching!

@chipdrone7202 4 жыл бұрын

Great video and excellent advice. BTW, what propeller brand/type would you recommend to improve the flight quality and noise level?

@SteveCoutts 4 жыл бұрын

Thanks! I have heard good things about Master Airscrew but they don't have Mini probs as of yet. My wife got me some of these amzn.to/2NaFYSQ for Christmas and I have been testing them since. They look good, they are quieter than DJI OEM, quality is good and I have had no errors with them. I may do a video but want to thoroughly vet them first. Lots of companies are offering the same looking prop so hard to say if quality will vary. Good luck!

@funkyjohnhuie 4 жыл бұрын

Please do! I am curious about non OEM propellers, just as a cost saving measure, but obviously don't want to compromise on quality or my mini's flight.

@nikky050 4 жыл бұрын

Look at those biseps! I already changed one set of props. They recommend you to also use new screws because they have an especial blue glue on it.

@SteveCoutts 4 жыл бұрын

LOL! In the video I mention discarding the used props and screws and I also talk about clearing out the old lock-tight before installing the new props. 😀

@martonroland47 4 жыл бұрын

Thanks!!

@SteveCoutts 4 жыл бұрын

Thanks for watching!

@JoaoPaulo-pb9zv 3 жыл бұрын

Hey there Steve great tutorial, I bought the simple version of the mini and it only takes one pair of propellers are they marked or unmarked propellers. Greatings from Portugal

@SteveCoutts 3 жыл бұрын

Thanks! Greetings from Canada. I'm not sure I understand the question, can you please rephrase it?

@suzannerichard2991 4 жыл бұрын

My Mini has been acting a bit erratic the past couple of flights...drifting while hovering, not landing quite near home point, and last flight it did one of those bouncing off the ground moves!! I’m just glad I was over land and not water. Upon further inspection I noticed some very tiny nicks on the rear props. I hope after I change them, this rectifies this behavior. I’m nervous about changing them, but found your video very helpful. Thanks for posting 😎

@SteveCoutts 4 жыл бұрын

Glad the video was helpful! Let me know if new props fixes the issues. Happy, safe flying! 👍

@suzannerichard2991 4 жыл бұрын

Steve Coutts changing the propellers has seemed to have fixed the issues! The Mini was very responsive and I had pinpoint control. I’m so happy. Thanks again for posting such informative videos👍

@SteveCoutts 4 жыл бұрын

@@suzannerichard2991 Awesome! Glad to hear it and thanks for letting me know. Thanks for watching!

@JohnTye 4 жыл бұрын

I honestly didn't know the importance of some of this stuff. Replacing in pairs for one thing. Thanks. I've been pretty stingy with replacing as a new flyer and I see it's $12 for a set from DJI so I guess I just get a complete new set because my drone has been flying poorly lately. THANKS AGAIN.

@SteveCoutts 4 жыл бұрын

Terrific! Glad it was helpful. I was really stingy on replacing props with my Spark but the Spark could handle really bad props and keep on flying. No so with the Mini. Thanks for watching! 👍

@cosmichrist Жыл бұрын

Thank you

@SteveCoutts Жыл бұрын

Thank you for watching! Cheers!

@Fjcc1971 4 жыл бұрын

Good Tips !!

@SteveCoutts 4 жыл бұрын

Thanks!

@Fjcc1971 4 жыл бұрын

@@SteveCoutts They are the most delicate propellers I ever saw in a DJI drone

@SteveCoutts 4 жыл бұрын

@@Fjcc1971 Yes, I completely agree and really it is why I made the video. Delicate props on an entry-level drone, not the best combination. Cheers!

@Fjcc1971 4 жыл бұрын

@@SteveCoutts Anyway .. Mavic Mini is an awesome Machine ! :) wORD

@Fjcc1971 4 жыл бұрын

@@SteveCoutts Anyway .. Mavic Mini is an awesome Machine ! :) wORD

@josephpk4878 3 жыл бұрын

To avoid stripping small screws, always back it off until you feel it click into the thread, then tighten it.

@SteveCoutts 3 жыл бұрын

Good tip, thanks.

@RobertoGiordanoVideographer 4 жыл бұрын

naturalmente iscritto......grazie e complimenti per i tuoi tutorial di alta qualità of course subscribed and thank you for your high quality tutorials...... what do you think of carbon propellers?

@SteveCoutts 4 жыл бұрын

Grazie per le gentili parole! I have not tried the carbon propellers so I can't comment. I did try some of the colourful, plastic ones - kzfaq.info/get/bejne/nNt1qtOrt8jUeIE.html. They worked well for me but the quality was a bit suspect. For now I am sticking with the DJI props.

@RobertoGiordanoVideographer 4 жыл бұрын

@@SteveCoutts thank you very much and congratulations again for the precious tutorials ...... greetings from Italy #stay at home

@zacw7118 4 жыл бұрын

omg thank to this video my mini is flying properly, i did not notice there is a line on the propeller, no wonder after i change it it keep flying in circle and wont go up, i was about to go to the DJI store to repair. Cheer mate

@SteveCoutts 4 жыл бұрын

So glad to hear it worked out! Happy, safe flying! 😀

@getlosttogetfound986 3 жыл бұрын

Thanks for your info. I never knew about the marked propellers which is why my Mini would not take off. "Replacing propellers is a lot cheaper than replacing a mini $$$"

@SteveCoutts 3 жыл бұрын

Glad it was helpful! Cheers!

@mattstrickland1015 3 жыл бұрын

Thanks for the reaction on my post Steve. What'd ya think? Make sense?

@palmieritv1109 3 жыл бұрын

My mini gave me a warning that said. "Motor spinning too fast" when I brought it back the bottom left motor started vibrating. The props looked fine to me so I kept flying. But when I brought it home I noticed that there was a slight bend when comparing it to a spare propellor. Now i know that one side of the propellor is curved and one side should be completely flat

@SteveCoutts 3 жыл бұрын

Good observation. The Mini's propellers are very delicate, even the slightest deformity can cause issues. I think it was the .0500 firmware where DJI added motor specific error messages, a really great addition for sleuthing out propellers issues. Happy flying!

@SuperTA329 3 жыл бұрын

@Palmieri TV My mini did the same exact thing today. Did changing the propellers fix the problem. I also cant get my drone over 22mph. in sport mode.

@United_By_Water 3 жыл бұрын

I like the red and white props you have at the end of the video, they work ok for you? If so, what brand are they?

@SteveCoutts 3 жыл бұрын

Yes, they did work for me. I did a whole video on them - kzfaq.info/get/bejne/nNt1qtOrt8jUeIE.html. You can find them under a number of different "brands" but I suspect they are all the same. Lots of folks complained about them and the build quality is not up to DJI standards so be cautious. Like I said though, I didn't have an issue with them. I have not used them since I did the video though, I just didn't want to take chances. Really wish DJI would add some colourful options. Cheers!

@United_By_Water 3 жыл бұрын

@@SteveCoutts Ok thanks for the heads up, I appreciate it.

@pandusetiawan1 3 жыл бұрын

Thank you for sharing the knowledge (sorry for my bad english I'm from Indonesia). What do you think about landing skids...are they make a problem for Mavic Mini as they are not original part from DJI?

@SteveCoutts 3 жыл бұрын

Thank you for watching! I have no experience with the landing skids but you should be cautious with non DJI parts as they will void your warranty should something go wrong while using them. They would also likely but the drone over 250g, if that is important to you. I most often take off from my hand or backpack and almost always land in my hand. I find that more convenient and it keeps the Mini away from dust and moisture from the ground. I did a video on hand landing and launching if you're interested - kzfaq.info/get/bejne/fJ13hbChq6fNZZ8.html. Cheers!

@pandusetiawan1 3 жыл бұрын

@@SteveCoutts Ahh.....thx man..I'll take a look at that video...cheers

@philbrening6198 4 жыл бұрын

Also noticed your mini props are very much outside the normal black with whiteish gray markings. I’ve ordered kids of props and screws. Wonder if take offs or clones props exist ....whether to customize with color as...as you have and do you recommend substitute props for customizing whether it is for performance or looks¿. Thanks again

@SteveCoutts 4 жыл бұрын

I have been testing 3rd party props since Christmas, a gift from my wife. Will be doing a video on them soon. DJI's warranty won't cover you if you use 3rd party props. They look awesome and have been good for me but many others have reported serious issues. Buyer beware.

@bhavinnagda4167 2 жыл бұрын

in the end of video you seems to use a different propellers , how well did they perform ?

@SteveCoutts 2 жыл бұрын

Yeah, I was testing some third-party props. They worked fine for me but many people have had problems with them. Definitely some quality control issues. After testing them I went back to the DJI props. My review can be seen here - kzfaq.info/get/bejne/nNt1qtOrt8jUeIE.html. Cheers!

@MicahBBurke 4 жыл бұрын

My props were a bit damaged and I was flying anyway, got the dreaded "max power" warning and the drone dropped from the sky. Will be changing them out asap.

@SteveCoutts 4 жыл бұрын

Yikes! Glad you didn't lose or break your Mini.

@lukerietzke182 Жыл бұрын

Hey Steve, is it possible to strip the threading On the propeller motor where the screws insert? I can’t seem to get a couple of the screws to stay in.

@SteveCoutts Жыл бұрын

Yikes! Yeah, I'm sure it's possible. In the back of my mind I always worried a bit about cross-threading or stripping one of those tiny screws but thankfully I haven't done it (knock on wood). Another reason for me to dislike the screw on props. Anyhow, I don't think it's easy to fix. I believe you have to replace the whole motor arm assembly which requires soldering. You may want to post a query in the DJI Forum (forum.dji.com) to see if anyone can offer advice. I have no direct experience with it. Alternatively you can reach out to DJI Support or a local DJI dealer. My guess is it will have to go in for repair and it may not be worth it with shop labour. Good luck, let me know how it works out.

@marktesch 4 жыл бұрын

Hi, any thoughts/concerns about how exposed the tops of the prop motors are?

@SteveCoutts 4 жыл бұрын

I don't particularly like it. I worry about it getting gummed up with bits of dirt or whatever but I guess time will tell if that's going to be a problem or not.

@omgbygollywow 4 жыл бұрын

Can you do a demonstration test of how strong the propellers are? For instance, will they cut paper. Can you show if the propellers dangerous; will they cut you, etc.?

@SteveCoutts 4 жыл бұрын

I am not likely to do something like that but never say never, I guess right? The Mini's props are very thin, light and flexible. They will cut paper - no problem. If you catch your finger the right way, it's possible you could cut it. I'm not willing to try that either - haha. I tend to fly the Mini low and close to things and have certainly done my share of grass and leaf trimming. Sticking anything significant in the path runs the risk of destroying the propellers as well as possibly damaging the motor. Cheers!

@MrJuliperkasa 3 жыл бұрын

1:38 Same as like mine , its always turn right. Which props that i have to replace ? Only both right motor ? Or only damaged prop ?

@SteveCoutts 3 жыл бұрын

If it's going backwards on takeoff I would think the back props are not producing sufficient lift. I would try replacing one motor at a time to see if the problem goes away. You need to replace both props on the same motor with new propellers from the same package - they have to be replaced in pairs. The latest .0500 firmware has the ability to detect and display certain propeller/motor anomalies. If you're not seeing that, then perhaps it's not able to auto-detect the issue. Worst case, just replace all 8 with new props. They are not that expensive. Good luck!

@c.k.l.2154 4 жыл бұрын

Thank you! PS: Сооl shot with a dog, cute)))

@SteveCoutts 4 жыл бұрын

Haha! Thanks and thanks for watching! 😀

@Concordedeyoutube 3 ай бұрын

Bro thank you you re video helped me for the stupidest reason my drone wasn’t flying cause my mismounted my propoeler thanks

@SteveCoutts 3 ай бұрын

Glad the video was helpful. I've been there myself. 😀 Cheers!

@JoaoPaulo-pb9zv 3 жыл бұрын

Right. I myself read my question and it did not any sense. What I was saying was that in the simple version it only gives two extra propellers what is odd. It would at least give two sets one marked props and the other unmarked.

@SteveCoutts 3 жыл бұрын

DJI's description is kind of confusing. With the basic kit you get one extra "pair" of propellers. A pair you would think is two but it's actually four propellers - two of each kind - marked and unmarked. The Fly More Combo gives you three extra "pairs", which is actually 12 individual propeller blades or 6 sets, three of each kind. Cheers!

@HansPetterOsvold 4 жыл бұрын

Good video Steve👍 atb Hans Petter

@SteveCoutts 4 жыл бұрын

Thanks Hans!

@bharatindianagamer Жыл бұрын

Hey I'm hearing some whistle sound from my mavic mini while I put guard on my drone..so what's tha reason of that can you tell me ?

@SteveCoutts Жыл бұрын

If you're only hearing the whistle sound while the guard is in place, perhaps it is not fitted correctly or damaged? I haven't flown my Mini with the guard in years but I don't even recall it making a difference in how it sounded.

@opwan2002 3 жыл бұрын

any luck with Carbon Blades? Saw a post about body strikes in Sport Mode? Will Carbon blades prevent this?

@SteveCoutts 3 жыл бұрын

I haven't specifically tried any carbon blades for the Mini 1. I tried other third-party props (kzfaq.info/get/bejne/nNt1qtOrt8jUeIE.html) and they worked fine for me but I ultimately went back to DJI OEM just for peace of mind. Cheers!

@jarom6894 Жыл бұрын

Why do you need replace both propellers at the same time? Is there any good reason or just because manual says so?

@SteveCoutts Жыл бұрын

First and foremost it's a recommendation from DJI. Every pair of propellers may be slightly different from every other pair so by installing in pairs form the same package you are mostly assured that you'll have a balanced pair on a particular motor. By only replacing one propeller you ~could~ be introducing an imbalance, which can lead to unwanted vibration and/or motor damage over time. I replace them in pairs even though it seems quite wasteful. The propellers are relatively cheap and I don't need to replace them that often so it's not really worth messing with. Personally I wish DJI would put a little effort in and come up with quick swap propellers because frankly I can't stand the screw-in variety. Cheers!

@dwainetyncompany 3 жыл бұрын

Hey, I know it’s been awhile since you’ve made this video. The red and white propellers, did you buy them from Amazon? Have you any experience buying propellers that are not technically OEM, from Amazon? Good, bad? I appreciate your time if you take to reply. Your awesome, reply or not! Edit: I’ve actually watched several of your videos and discovered your “3rd Party Propellers” video. Your even more amazing than I’d originally thought.

@SteveCoutts 3 жыл бұрын

Haha! Thanks for the comment! My wife bought me the props from Amazon. My other video goes through it and really, same conclusion. They worked very well for me, I didn't have any problems although lots of reviewers on Amazon complained about issues. I haven't used them since I made that video, I went back to DJI OEM props. I was feeling like putting them back on though, I really like the colours. Honestly, I really don't understand why DJI doesn't come out with some fun colours for their drones. I think they are leaving money on the table. Thanks for watching, cheers!

@farawayfromhome5322 3 жыл бұрын

Would be helpful if you showed how the correct set up looks at the end. Great information!

@SteveCoutts 3 жыл бұрын

I just watched it again and yeah, I can see what you're saying. If I ever do another prop replacement video for sure I will add a visual on the correct set up. Cheers!

@farawayfromhome5322 3 жыл бұрын

@@SteveCoutts thank you Steve. The video was very helpful regardless

@SteveCoutts 3 жыл бұрын

@@farawayfromhome5322 Thanks! 👍

@xjdavid5194 4 жыл бұрын

Hey man, what kind of paint do you use in ur propellers?

@SteveCoutts 4 жыл бұрын

Paint?

@rchiariello 3 жыл бұрын

Any tips for getting the props to move freely? I've unscrewed and retried several times but there is still a little resistance. Thanks!

@SteveCoutts 3 жыл бұрын

I am assuming they are DJI OEM props. If so, have you tried another set? Every DJI set or third-party set that I have installed on my Mini have all moved freely. A little resistance may very well be fine as long as you're not noticing any take-off or flight anomalies. This also may be a good question to ask in the DJI Forums (forum.dji.com) to see if others have encountered it and/or have a solution. Good luck!

@nedleolex 3 жыл бұрын

Have you had any luck with figuring out the problem? I'm dealing with the same issue as we speak.

@thomasw4422 3 жыл бұрын

I've just replaced my propellers and I'm a little nervous. Is there anything I should be looking out for in my next flight to tell if there is anything wrong? I'm worried I might have worn some of that blue threadlocker stuff of when I made a mistake and took it off and on again. Is that likely to be a problem? They're on pretty tight till, I'm just nervous as I don't want to risk the drone behaving unreliably.

@SteveCoutts 3 жыл бұрын

My original Mini had propeller issues, brand new, right out of the box. While sleuthing out the issue I uninstalled/re-installed the propellers probably two dozen times or more. DJI recommends you do not re-use the screws but I wasn't about to throw them all away and buy new props just for the screws, so I re-used them. I didn't apply any additional thread lock either. Since replacing my original Mini props, I have not had a propeller issue. So, I suspect you will probably be fine. If you're worried just check that the screws are tight before flying. I was very worried about screws coming loose with this prop design but in the years I've owned my Mini and now Mini 2, I haven't had a single screw come loose. (knock on wood). If there's a propeller issue, I think it's easier to spot at takeoff. If on takeoff the drone leans heavily to one side, forward or back, instead of generally straight up, you may have an issue with props. Cheers!

@thomasw4422 3 жыл бұрын

That is a relief. I'm pretty sure all of them had the blue stuff, but some of them weren't going back in, and there's a change I could have mixed one up. My Mini 1 has been very reliable for its 6 months of life so far. I often fly in urban areas, and the last thing I want is the machine to come down where it shouldn't after promising my neighbours it won't. The whole reason I replaced the props was because I broke one, and despite that, the whole thing only flew with a slight wobble, so hopefully it will be fine. I might look into topping up the threadlock at some point just to calm my nerves.

@shred3005 4 жыл бұрын

Has any tried any of those ‘low noise’ propellers available online? What about flight characteristics? Are they really quieter?

@SteveCoutts 4 жыл бұрын

You can see I've been sporting the red/white ones in some of my Mini videos. 3rd party props obviously. So far, so good. No errors or flight anomalies. Noticeably quieter too. Will likely do a video once I have fully vetted them.

@shred3005 4 жыл бұрын

Thanks Steve I saw the red & white ones and wondered if it was your footage or grabbed elsewhere. Not that the Mavic Mini is really noisy compared to other drones but noticeably quieter would be nice 👍. Always trying to reduce the sound footprint

@manjulabw Жыл бұрын

useful

@SteveCoutts Жыл бұрын

Thanks, cheers!

@moreseun 3 жыл бұрын

🙏🏽 Oh wow I should have watched this first. I went from crashing my drone once to installing the wrong propeller blades in the wrong spot to crashing the mini a second time 🙄

@SteveCoutts 3 жыл бұрын

Yikes! Well, hopefully you have it all sorted now. Cheers!

@michaelmiller3552 4 жыл бұрын

Is there a problem with the quality or using aftermarket props. I see the red and white props everywhere. I would like to get them to increase the visibility of the drone.

@SteveCoutts 4 жыл бұрын

My wife got me some for Christmas and I have been testing them since. You may have noticed them in the video. They are basically these ones - amzn.to/2NaFYSQ. Mine were a different brand, Anbee, but I can't seem to find them now. They have worked excellent for me. No problems, no errors. Quality seems good and they are definitely quieter than the DJI OEM parts. I will probably do a review at some point when I am confident they are solid. They definitely look awesome! Good luck! 😀

@johnmadrid1083 2 жыл бұрын

My mini SE propeller has a little bit stuck when start to fly? why? do i need change motor or not?

@SteveCoutts 2 жыл бұрын

I would just make sure that it's clean. Do a physical inspection and blow some air in there to clean it out. If a particular motor is not moving freely and especially if you're noticing flight anomalies, I would contact DJI Support. Good luck!

@guyjperson 4 жыл бұрын

I would also mention that these little screws are easy to crossthread, so make sure, even if you've cranked down a new propeller til it won't go anymore, that the blade is seated well. I say this from bitter recent experience (that came out okay, but it was scary). Also, from TODAY"S experience, make sure the blades are tucked away well in your case or whatever. I opened my off brand case today to find that one of my propellers got bent inside the case.

@SteveCoutts 4 жыл бұрын

Both good points, thanks.

@spicygaming8779 Жыл бұрын

My mini 2 crashed indoor, Was my fault played it like a toy, I saw one propeller was broken in the edges...I replaced it found that propeller was tighter than it should be. I found another arms propeller was tight changed that too but still it felt tight not wiggling around like other ones. I found loosening the tightened propellers was normally wiggling but loose screw will come out ofc so i tightened it like the others. They are tight but in flying it was asusual...Is there any fix or it's just ok to leave it like that?

@SteveCoutts Жыл бұрын

As long as you don't notice any fly anomalies, you're probably fine. There are slight variations in the propellers so you may notice that some are a bit tighter than others. You want to pay attention to the edge cases. Too much play (wiggle) or too tight and you should probably replace them. The original Mini was very picky about propellers where the Mini 2, etc were more tolerant of variances.