Is it just a coincidence that the drones the govt uses to kill other drones looks just like this? They have some defensive system that will use a 200mph drone to kamikaze into the other drone and destroy it.

Why are you lying saying that it’s “only the first 20 people who click the link”??

Should help Ukraine out

Red Bull won't go quietly to someone saying they're faster... Hold your breath... Red Bull is about to make faster wings.

@@MADmosche First 20 purchases, not link clicks.

Thank you! Hopefully the first of many records to come 🤩

Not the fastest... :)

woah.. no way!

i was here

@@patrickderp1044 is here the crusty crab

Amazing comment 😂 the Red Bull drone is technically a different use case to be fair.

@@LukeMaximoBell1yeah, you wouldn’t have as much control with yours I don’t think, but this is an insane technological feat

@@LukeMaximoBell1 How fast were you even going in a car? Wouldn't a leaf blower do a better job and blow even faster than the speed you're driving? Also the aerodynamics of the car probably affect the way the wind hits the drone as well.

If I am not wrong redbull didn't make the whole drone they just made the branded aero housing at the end. That we saw In the final video.

Pwnd ❤😂

Hahaha 😂 at the moment I can’t see how that’s possible, but let’s see what future tech brings!

This is not possible, due to the propellers not being able to surpass mach 1. So this would need a jet turbine or something like this??😅

You should check out dynamic soaring gliders! They're already going transonic, and that's without any propulsion

​@LukeMaximoBell1 now give it to red bull

@@evanbarnes9984 while they hit insane speed, they fly poorly in most environment

Wait until the solder or the wire touches the other one it even lights up to notify you for the malfuction.

@@donaldh2615 ow, don't forget the shiny silicon on the ESCs, if something wrong happens they can reflect the "led notification" in all directions

@@donaldh2615 Hahaha

Thanks 👊🏼

@@LukeMaximoBell1 Hope that you guys credited the dude (quadmovr) behind that design, unlike redbull. :)

No it’s way too fast for F1! Haha

​@@LukeMaximoBell1 you should be able to capture F1 cars every angle close up then...last I checked Red Bulls drone had big issues with taking quick turns.....also why choose their similar design...I mean at this point someone can copy that and beat ur record JS.

@@m2-x-n253 Fast turns will require control surfaces on those wing blades, or a quad-canard with all moving surfaces.

@redbull sponsor them please

Sure, after smashing the RB can, they surely will think about that option.

Thanks bro! 🙌🏼 yeh this video is just a small insight to all the work that goes into it which you will resonate with 😂

Worked so hard to not even come close to breaking the real record.

​@@LukeMaximoBell1 you are gonna make drones and project air will strap another rocket engine to it😅. I mean that would be cool fr

Amazon same day delivery be like lol.

@@MADmosche Which is what?

Thanks and so glad you liked the clear tail! Wasn’t sure it would come out well but it did 🤩

Hell'a from south Africa I thought. And was so proud! I lived in Namibia man

@ChrisRosser really nailed it!! 😂

*_ And a Wine FARMER at that too! _*

It’s beautiful to hear 🤩

@@LukeMaximoBell1 *_ Like a Mad Banshee _*

redbull only made the outer shell it was build and designed by drone gods

Thanks 😊 here is the design video Designing the worlds fastest Drone | Guinness Record Holder kzfaq.info/get/bejne/iNWDhsSE0LW4hJc.html

Awesome comment thanks! 🤩 a proudly S.A. project!!

Haha thanks! I think actual FPV builders and pilots are some of the only people to understand this project and its complexity. It’s clear when some people comment that they have 0 experience with this kind of thing.

That thing a bullet..lol

Thanks!

He is putting random parts together and hoping it will work OR he pretends to put random parts together in hope it works and wasting my time. But he talked with drone whisperer as that is fun while watching him putting random parts together and hoping it will work for 10 minutes... Rigorous, thoroughgoing efforts deserve subscribe, randomness does not.

@@OskarHersch Sorry for wasting your time 🤗

@@OskarHersch that's what testing and building that kind of stuff is all about. redbull did just the same and claimed they came up with the idea even tho other people did it way before them did they waste your time too? if so maybe don't watch youtube videos

​@@OskarHersch calling it a waste of time is a bit rude, but you definitively got a point. its still some work, but mostly about assembling existing parts to get something to work. the peoblem that i see is the company guinness world records. it is to some degree pay to win and i bet there were faster drone flights based on how easy it was to build it but they would never list them in their book (cause money).

Hehe thanks for all the moral support along the way especially when I was sad because my drone caught on fire instead of being fast 😂

@@LukeMaximoBell1”please go fast!” Drone: no! 🔥

Awesome! What speeds have you gotten up to?

Thanks so much 🙌🏼

Thanks! Just a bit 😂

Only a bit of battery and plastic sacrifice for science

Awesome! So glad you enjoyed it 🙌🏼

it wouldnt be a compition lmao. Multibillion dollar company would have a faster drone in a few days

@@wizard101stormdude I was referencing the fact that it has sorta already started. He originally got the record, then Red Bull beat it, then he beat it again.

Redbull never beat any record​@@elliotmarks06

Underrated (here at 10 likes(excluding mine)).

highest altitude?

Thanks!! Was a lot of work 😂

Good question. If you think of something cool to do next let me know!

Thanks so much 🤩 and I totally agree 🤗

I will upload a full parts list at a later stage. But final specs are: T-motor 3115 900kv motors APC 7x11 inch props 2 x Dogcom 1500mah 160C lipos Matek 12S FC

​@@LukeMaximoBell1In the video it said you used tmotor 3115 1500kv (they seem to be prototypes) and an 1800mah pack

@@LukeMaximoBell1 Its possible, you share your 3d print parts

Thanks!

Here is more detail Designing the worlds fastest Drone | Guinness Record Holder kzfaq.info/get/bejne/iNWDhsSE0LW4hJc.html

Haha I’m glad you enjoyed it! 😂

If someone builds that they’re going to jail 🤣

lol i think elon did some heavy lifting in that department

Saffas FTW

It's so much work!

12:12 👍🏼

Yeh it does 😂 like straight out of Star Wars!

They are the only props that have the pitch and diameter I need for the record

Availability. Printed props wont last a second in that application. Similar when there’s hype about toroidal props. And Injected molding is super expensive to setup

@@jeffclassics Exactly correct.

@@LukeMaximoBell1 What about sintered metal. Again, I’m no expert, I’m just asking. I am fascinated by this stuff. I fly professionally and over the past 15 years or so there have been some really neat advancements in prop tech for actual aircraft. I’m not sure what kind of RPMs your props are seeing but I imagine it is on par with something like a modern turbo prop. In that area more and more older aircraft are seeing their three and four bladed props replaced by 5, 6, and 8 bladed props with modified shapes like paddle board and modified tips. There are a few companies playing around with contra rotating designs that are interesting, making kind of an external jet prop. These mods greatly improve performance in thrust, airspeed, noise, and fuel efficacy which that last part may or may not relate to improve battery life. One of my hobby’s is shooting and there have been some really impressive strides made in metal 3D printing. There are a few suppressors on the market now that simply couldn’t be made without a 3D printer. The pressures involved in containing hot gasses from a muzzle blast are exceptionally high. I can’t imagine that something like that would fail in your application. Composites and hybrid composites likewise have proven to be very durable. It would be interesting to see these strides getting scaled down to use in UAV/drone tech. Good video on the subject kzfaq.info/get/bejne/pdCGgbKbkteXg4U.htmlsi=L-SVxDF0cBbn48dT

@@SuperTrb0 and to add, the bigger prop size is the more efficient it is. So just by scaling down props in jets or boats doesn’t guarantee itll be efficient and economical.

Hahaha so true! Normal drones are difficult enough 😂 this thing is an absolute nightmare.

Thank you so much!

You think this kid is smart enough to follow warranty processes? 😂 I doubt it!

​@@MADmosche Bold assumption someone who works with hardware doesn't know how to read a warranty form.

@@MADmosche I'm pretty sure you're like 18 from your videos

I don't think they were using "Nirmal operating conditions" in this video. Batteries have a C rating, which indicates how much output they can deliver. This clearly exceeded that rating, as the batteries caught fire.

wimps

DDG never did and I don't think Redbull has a drone?

@@Kai-P they basically sponsored a guy that built one and helped him make it out of carbon fiber there is a video on youtube about it.

@@zachmoyer1849 Thats the Dutch Drone Gods (DDG) yes. I wouldn't call it a redbull drone just because they did some canopy optimization and put their logo on it. Anyway, they said its the fastest camera drone that can last a whole track and it probably still is.

Apples and oranges. Not dogging on this channel or anything but DDG has way more resources at their disposal. If they wanted to make a drone for this purpose, I think they'd give this drone a good run for it's money.

Thanks so much!

Thanks 😊 here is my design video Designing the worlds fastest Drone | Guinness Record Holder kzfaq.info/get/bejne/iNWDhsSE0LW4hJc.html

Thanks! 🙏🏼

Haha congrats!

You are Peregreen fast!!! 😃

Thanks man 😎

Thanks 😎

More to come!🤩

Thanks for the kind words 🤩

Thanks. Here is the design video. Designing the worlds fastest Drone | Guinness Record Holder kzfaq.info/get/bejne/iNWDhsSE0LW4hJc.html

Thanks!

Maybe in the future!

Good idea. Here is my design video Designing the worlds fastest Drone | Guinness Record Holder kzfaq.info/get/bejne/iNWDhsSE0LW4hJc.html

Thanks. Here is the design video Designing the worlds fastest Drone | Guinness Record Holder kzfaq.info/get/bejne/iNWDhsSE0LW4hJc.html

Thanks so much 🤩 so glad we got there in the end. There were many times we’re giving up seemed like the easy way out

Would the use of torodial propellers increase the speed?

Thanks so much! Glad you enjoyed the process 🤩

Thanks so much! Yes this is muuuuch faster than DJI drones 😅

Thanks! 😁

Thanks so much! 🙌🏼 there are plans in the works to make a commercially available drone.

Thanks so much 😎

Agreed! A lot of exciting things in the space!

Thanks so much! 🙌🏼

Thanks 🤩

Haha thanks so much! You aren’t the first person to make that connection 😂

It took a few takes to get right because I couldn’t help but laugh when we were shooting it 😂 I’m glad you enjoyed it!