Wow, we have some seriously passionate Walther fans. Firstly, I definitely should have done more research on the toolset prior to release. That is on me. However, for a "Gun specific" multitool only 2 of the 7 implements have anything to do with guns. The rest are generic in nature. Even if I give a pass to the quality on those items (which isn't great). The other implements are just thrown into it. Where is the carbon scraper? Sight adjustment tool? And I'm sure there are many other gun specific tools that would have been better than a spare blade or the file that doesn't have any texture. Flame on! Cheers, Dominic
@pikemaster205 ай бұрын
I'll be honest I was disappointed for a moment. Then I saw this comment 😂😂😂 perfect. Addressed your flaw and came back strong, you are honestly inspirational.
@EdFromTheBlock5 ай бұрын
Hitting the nail on the head here... Love what Walther does in their pews but for this to be a pew maintenance tool... Meh.
@squirrelsurvival5 ай бұрын
Walther is my favorite gun manufacturer! 🔫 ❤️ Thanks for the content man!!
@johnsanford35965 ай бұрын
Walthers is primarily a maker of PISTOLS, so there's no sight adjustment tool or carbon scraper needed, in contrast to prior Leatherma, SOG and Gerber tools that are focused on the M16/M4 platform. As for the craptastic file, your criticism of that is dead on.
@gerald85735 ай бұрын
@@johnsanford3596 Yes. Also: Walther is a German company. Not many direct gas impingement systems here. Stroke piston systems (no matter if long or short) don't get their breech dirty as much.
@davidbrewer3595 ай бұрын
GMT = gun maintenance tool
@frakismaximus30525 ай бұрын
Niiiiiiiiiceee
@johnshepherd96765 ай бұрын
Bingo. The name on the tool is a dead giveaway.
@abc456f5 ай бұрын
@johnshepherd9676 Also who makes it.
@rshinn87765 ай бұрын
I was wondering if it's for their guns
@OutlawAlaska5 ай бұрын
Yep, this isn't your standard load out EDC tool
@GarrettsGear5 ай бұрын
They certainly didn't "just throw them in there" Guns don't typically use Phillips head screws or require scissors. It's a Gun Maintenance Tool, made by a gun company.
@maxlvledc5 ай бұрын
Sadly the small flat head is so thin and flexible I doubt it will last more than a few uses.
@CharlesHeller5 ай бұрын
@@maxlvledc Would work very ell on screws on grips of a 1911, which you do not want to over tighten.
@danewood23095 ай бұрын
@@maxlvledc the flat head is designed to be specific to Walthers, as is the spring puller
@Woowoo885 ай бұрын
By walther for walther pistols. I would have put a dedicated slide release key on there because walthers require a key to unlock the slide to take it off. My buddy had one that he got on the private sell market and it didnt have a key so i had to rig up one out of other things to turn the pivot in the frame to let the slide come off. I believe Ruger uses the same thing or type but their own key has to be used. I know the LC series does anyway.
@davidkuehne4765 ай бұрын
@@Woowoo88 It's a schrader valve core tool.
@robertmoorej5 ай бұрын
The little hook is for clearing a failure to extract.
@anthonymiller89795 ай бұрын
Handy rake tool for picking locks too 🙂
@PaulsToolReview5 ай бұрын
Or grabbing a spring leg to put it a post...this tool is designed well for gun maintenance. A small 2mm hex bit would be useful to add for some grips and a small punch to push pins through instead of a serradded edge would make it ideal.
@InvidiousIgnoramus5 ай бұрын
Umarex (Walther) calls it a spring hook.
@PaulsToolReview5 ай бұрын
@@InvidiousIgnoramusThat's what I thought and use it for...
@JeffBradley-yu4tr2 ай бұрын
Using a steel tool for that is a bad idea. If this were the purpose, then the hook should be brass or polymer.
@johnshepherd96765 ай бұрын
You can tell whose EDC includes a firearm and whose doesn't. This tool would be nice to have in the range bag or in the field. I probably won't be getting one because I already have a bunch of tools in the range bag.
@Sammysosa5185 ай бұрын
Cool bud
@CA_03415 ай бұрын
Looks like those are all tools for weapons maintenance. It’s very specific to gunsmith’s. That multitool will NOT be for most people’s needs. But I like it and will use one as an armorer. I didn’t even know about that tool so thank you
@seanthomas88645 ай бұрын
I was wondering if it was produced by the Walter firearms company. I guess that would explain it. I do love the size and shape, but as he says. I don’t really need it.
@AndersTornqvistsvedbergh5 ай бұрын
The "thin and long" formfactor is interesting. Also that it's so light. Inspirational
@IAN_G_EDC5 ай бұрын
That’s a very useful little gun maintenance tool! All the implements would work great for gun maintenance
@frakismaximus30525 ай бұрын
Guns are cool
@rebel-yellenterprises14795 ай бұрын
Thank you for showcasing this firearms maintenance specific multitool. I just ordered one for my range bag.
@muxmurki14975 ай бұрын
I looked at the GMT 150 because I'm writing a book on MTs and other pocket tools, even telephoned with the responsible product manager (here in Germany). The file may not be the greatest, but particularly that "weird thing" you didn't understand is very helpful to push an pull springs in weapons. So, as a lot of others correctly stated before, it's a specialized tool. On the one hand it is just that. On the other hand, as you stated yourself, it has got a very interesting form factor for the pliers. As I have commented several times, in comparison to small pliers from Knipex (and also some other companies) EVERY MT pliers fail to help to cope with medium jobs. Even a LM Surge pliers will fail to move a nut of 1/2 or 3/4", or get a grip on something of 20mm or more in width/thickness - which is no problem for a Cobra 150. But a small pair could complement those nicely. The Nextool Sailor and also the SOG power pint are pretty OK in that regard, but on very heavy, clumsy frames. So if you want a size between a real pair of pliers and the Victorinox pliers on SAKs, this fits perfectly... plus all the specific stuff.
@maxlvledc5 ай бұрын
question, what are your thoughts on the 100 cobra?
@YuhNinja5 ай бұрын
you know what sounds like it was thrown in there? This video onto KZfaq without even looking at the product page or doing a lick of research lol.
@bighouse95245 ай бұрын
It has the weird tool set because it is a firearms maintenance multitool. Which it actually has a pretty decent tool set for. But from an edc perspective most of the tools are useless
@chrisleeks38905 ай бұрын
Walther should have given it away 😁
@Woowoo885 ай бұрын
It's because that is made for a gun specifically Walthers line of pistols. That's what GMT stands for. Gun Maintenance Tool. That injection molded plastic is called polymer and it's what they make their pistol frames out of. I would also say your gauges are for barrel sizes. If you are going to review things know what they are for.
@SgtDuster5 ай бұрын
Anybody can call himself a "reviewer" nowadays. It's not a problem if you don't know everything, just don't pretend
@Woowoo885 ай бұрын
@@SgtDuster exactly! Now usually this guy is spot on for the most part but that was not in this video. I bet if he looked up gun multitool he would see a lot more similar to this one. This one isn't a good one in my opinion either. Half that stuff you don't really need to work on a pistol. What you do need is punches to get roll pins out and precision drivers maybe a sight pusher, scraper, etc.
@InvidiousIgnoramus5 ай бұрын
@@Woowoo88The tip of the file tool is sufficient for poking a roll pin out enough to pull it the rest of the way out with the pliers. Alternatively, just do what I do and keep an equivalent size hex key in your kit.
@pj44335 ай бұрын
Not sure what the diameter gauges are for, too small for barrels. But they look good for me for measuring pins etc that you will find holding firearm, parts together.
@elmadicine5 ай бұрын
I know this is a tool made for guns by a gun company, but it is legitimately an awesome design and form factor. I would love to see them expand this tool into a line with more widely usable toolkits, better tool steel and quality control, and even larger versions keeping the same slim gun-grip-textured poly scales but with the slim form factor
@palerider71715 ай бұрын
Dominic this has been mentioned by others but this is a Gun Maintenance Tool. Typically these have a few general tools, some ok others there to fill a slot with a few firearm specific tools especially those pertaining to the brand. Get the point you’re making however I doubt if Walther is trying to get into the full blown multi tool market. Full description below: The Gun Maintenance Tool 150 is a featherweight champion when it comes to gun maintenance. It includes eleven practical tools that together weigh only 66 g for quick help on the shooting range or in the field. Tools: pliers, plain blade, serrated blade, screwdriver, diameter gauge, file (fine and coarse), ruler, cable cutter and spring hook, plus a bottle opener for when youve finished your work. The GMT 150 can be carried almost invisibly on your belt in its nylon pouch.
@W-C-F-o1k5 ай бұрын
Hvac budget is a king. He was my first multitool channel. And now I've found you! Another king channel
@ToolTechGeek5 ай бұрын
these two guys have been consistently delivering top notch videos in this space. I’m grateful that we have them.
@W-C-F-o1k5 ай бұрын
@@ToolTechGeek 100%!
@ddayblue5 ай бұрын
Good channel
@B0n3rdawg5 ай бұрын
I would love a slimmer, more pocket friendly option like this from leatherman or victorinox.
@etherealicer5 ай бұрын
Victorinox makes the Victorinox FASS 90 for the StGw-90 (Sig 550) and it is mostly to adjust the sight. To my knowledge that is the only gun tool they make. Honestly, I would look at Real Avid, they have quite the selection of Gun-Multitools and they seem to be of decent/good quality.
@hrmIwonder5 ай бұрын
The SOG powerpint for the win! I ordered thumb studs for it, made the bottle opener into a flathead, filed the scissors to a point and rearranged the tools so the most useful ones are on one side and all one handed opening and closing. It's an excellent compact tool.
@j.t.5535 күн бұрын
You should make a video on how you did all that. I would love to do everything you did. Or even offer the services to people for $. 😮
@AaronBlankenship5 ай бұрын
There's a reason I don't carry folding pliers in my pocket anymore, and this video explains it perfectly. Once I can get a strong set of pliers plus Phillips plus scissors, it will live on me for the rest of my life. I probably grind the tip of the pliers to a little bit more of a point.
@josephthennes46565 ай бұрын
Nice multi tool, great for a range bag for sure. Now modifying it was my first thought and the possibilities are endless. I see a whole future of vids. Thanks for your time
@JeffBradley-yu4tr2 ай бұрын
For a gun specific tool, it needs a small punch (1/16"), a medium punch (1/8"), a flat head, a Phillips head, a 1/4" drive, a micro "pry bar" made of something softer than steel (e.g. polymer, brass, etc.), and parallel pliers. If you are specific to a model (AR, shotgun, etc.), then you may want to add a front sight tool, choke wrench, or something along those lines. It doesn't need a knife blade at all. (How many people are there who carries guns and don't also have a pocketknife already on them?)
@lesternielson92805 ай бұрын
is it possible that it's a companion tool for one of their firearms?
@Locklear335 ай бұрын
I dont think so….none of the included tools seem particulary useful in firearm maintenace or cleaning
@frakismaximus30525 ай бұрын
I love firearms!
@johnshepherd96765 ай бұрын
@@Locklear33 on the contrary, those tools are for gunsmithing.
@FireFighterChen5 ай бұрын
@@Locklear33 most of those tools are great for pistol and optic maintenance
@gordonwelcher95985 ай бұрын
Ridiculous! Why would they make a tool to help service their products? Surely it is meant for electricians only.
@Comm0ut5 ай бұрын
That toy is adorable. The fastener diameter gauge is hilarious. I don't even want a free one. Tiny tools are bad enough without being nearly useless.
@jonniez625 ай бұрын
It's implemented correctly for Walther hand guns
@CA_03415 ай бұрын
Absolutely!
@Robin65125 ай бұрын
not only Walther 😁
@yogibro64425 ай бұрын
Why the dull file ? Anymore that's what I look at first to decide if the tool is serious.
@Crus0e5 ай бұрын
100% agreed, hopefully they make a general purpose version and not just for gun maintenance
@tariqkamil78535 ай бұрын
Amazing, no mention of gun maintenance at all about the tool.
@mcrobielord15035 ай бұрын
I just wish knipnex just makes their own multitool with their cobra plier head
@CrowManyClouds5 ай бұрын
NO!!!!!! Not a multitool, their plier head with folding handles.
@B-RaDD5 ай бұрын
I'll take either of those options
@marcusott50545 ай бұрын
Glad to see more use of polymers in multitools. Below certain sizes you don't really need the strength of a steel frame anyway (mostly... I know some do). I'm aspleasantly surprised as I was back in the day by the Benchmade Bugout. Trimming excess weight.
@preludedude075 ай бұрын
It’s a firearm multitool not a standard. That’s why the tools on it are different than your standard set.
@THExDUDEx86245 ай бұрын
I want , I want! 😂. Looks awesome.
@stephenholt98295 ай бұрын
Thanks for reviewing this tool without actually knowing what it's for
@Consumername5 ай бұрын
Looks like a balisong. Pretty cool
@yvanleivacastro60275 ай бұрын
Well thank you. I was looking for this kind of multitool for bringing it to the shooting range. It's just perfect 😊
@brianwood8764 ай бұрын
"in addition to the pliers, all you really need in this tool are 3 things. A blade, a flat head, and a Phillips head".... And that's why i happily edc a skeletool cx
@csmallstar5 ай бұрын
I'd love to see what you come up with for modding this set
@danieljennagrouse5 ай бұрын
I'd love screw extraction pliers in this form factor.
@sergemarlon5 ай бұрын
What tools do you think are mandatory for a screw extraction set? Electrician focused?
@maxlvledc5 ай бұрын
Omg..would be amazing
@squirrelsurvival5 ай бұрын
For EDC, nah im good. But to keep in a range bag, hell yeah! Also this is not meant to just carry, its for taking apart and cleaning guns. Maybe they should make an EDC version.
@RolandLowhorn4 ай бұрын
I agree . .Strong saw ,file one side rougher..that works smooth metal Strong screw drivers .tight door screws ..actually work things ...
@RedneckDeluxe5 ай бұрын
When it comes to EDC, the Leatherman Skeletool is perfect in my opinion. --- pliers, screwdriver and blade. Nothing useless added.
@rjflippo5 ай бұрын
Thanks for the info Dom, Budget HVAC has some great finds.
@Robin65125 ай бұрын
this is in my range bag. great tool
@InternalIbex5 ай бұрын
This isn’t supposed to be an EDC tool. It’s designed to go in your range bag or go bag to do gun maintenance.
@maxlvledc5 ай бұрын
The gun specific tools are fine, but most of the more generic tools are mediocre at best. Like the file that has no texture.
@InternalIbex5 ай бұрын
@@maxlvledcnever said it was a good gun tool 😂. Hook is for springs, guages for telling diameters on parts or bullets and whatnot, no carbon scrapper because many gun manufacturers tell you not to use them. It’s to do minor things to your gun at the range or in the field. Not at the level that would require an armorer.
@takeachance22865 ай бұрын
If you've ever done any kind of low voltage networking or IT networking then you will know that the little hook that you saw on the tool is actually called a Wire Pick which is used for picking through data wires in something like a crossbox or punch down block.
@johannestreitner9460Ай бұрын
Würde der typ eine Bohrmaschine erlären, muss er sich zwei Wochen Urlaub nehmen 😂
@mattyvlietstra50174 ай бұрын
Cool tool. I wish it had good scissors like the mini sailor
@KnightRyder19905 ай бұрын
So the tools are meant for gun maintenance, Not EDC
@blade92925 ай бұрын
You know some gun maintenance tools can be used for EDC or more importantly, other maintenance fields than just guns. I don't how this tool translates into a walther pistol, but I've seen more general purpose multitools from walther.
@KnightRyder19905 ай бұрын
And some like this are just made to throw in a range bag to fix guns 🤷♂️
@andreasmerkel57175 ай бұрын
Maybe it fits in a gun case, for regular use there's nothing better than the Leatherman Wave. Full steel, several screwdrivers, a scissor, a very good diamond file, sharp blades and an amazingly sharp saw.
@adjutant2 ай бұрын
even though it was conceived as a gun maintenance tool. i would like to see it with a normal edc tool set. it looks really cool and neat as a platform, as you said
@BigChiefWiggles5 ай бұрын
Looks like a very light tool for scraping your AR bolt and doing other cleaning/maintenance tasks. Considering how heavy a military loadout is: it need to be as light as possible.
@robbybankston42384 ай бұрын
I used to have an old black Leatherman PST II that was a more compact version of what they have now about 20 years ago and it was the best.
@wilshned5 ай бұрын
Has an amazing form factor. If one side was a bit driver the other side had a blade, scissors maybe a pry tool or a file. I'd be very interested.
@justinator10105 ай бұрын
When I'm not carrying my surge i tend to carry a triple blade friction folder because most edc tasks are to cut something open or shorter if i require anything else in never more than a few steps away from a screw driver or some type of pliers unless i leave the house without the car and I'm not at work.
@adrianTNT9 күн бұрын
I got mine today, unfortunately when it is closed, the handles do not align and they rub / move left/right a bit. I wish it had a phillips head too. It is nice, small and light thou. Smaller than you would expect :)
@1on1c55 ай бұрын
Letherman K4 Free is the knife combo I carry daily.
@maryhinge405 ай бұрын
Not been funny fella, but it took me 3 minutes to find out this is a gun maintenance kit.
@paracop355 ай бұрын
😂
@Ashton.everydaycarry5 ай бұрын
I really love the size/form factor of this. Kind of reminds me of the sog baton multitools.
@louishopwood38614 ай бұрын
Great review, I've just picked one up soley for the form factor as it's super-pocketable. Please keep us posted about any modifications you do.
@stevanoutdoor26 күн бұрын
I like the slim profile but I don't own a firearm. If they would make one with a main straight blade, double sided file, 3d philips head screwdriver and a strong flat head screwdriver I would be interested.
@christopherchapman88935 ай бұрын
Well, I (was) going to be (helpful) and point out that the tool configuration signifies that this is more of an armorer's or CCW EDC tool, but this has been clearly communicated over the vast (and often unnecessarily rude) comments section. What I (will) say is mistake or not, thanks for posting this. I was unaware of this tool and will be adding one to my bag. Leopold also makes a tool (similar) to this which I own and is great to have. It doesn't have pliers so the Walther is actually a step up! Cheers!
@nycgags5 ай бұрын
The power pint ROCKS
@ucitymetalhead5 ай бұрын
I normally carry my mt on my belt and usually go with a wave plus or surge/st300 but around the house I use the powerpint and it's just awesome.
@the_swinging_axe5 ай бұрын
Looks cool! I love the powerlitre and it replaced the skeletool cx in my pocket...but then I got the power access and it's all I carry. The one handed pliers are where it's at! Any other lightweight one handed options? I prefer pliers, file, knife, and drivers.....
@MichaelR-kl6hk5 ай бұрын
The best small multitool I have and often carry on the weekend is the leatherman juice xe6 and its only ok. Would love something that size that you could pick and choose your tools.
@korgan77795 ай бұрын
Hmm, interesting design and certainly a good starting point for improvements as you've stated. It'll be nice to see what you come up with.
@jamesadowney5 ай бұрын
This does look like an interesting platform for customizing. I don't pocket a multitool because most are heavy, but I'd pocket this if the tools could get dialed in. I don't EDC a firearm, so some of this stuff I don't care about. I'm not even that keen on a blade at all given that I'd still carry a knife. But this would be a cool platform to make an ultimate TSA friendly bladeless tool. I'm thinking adding a phillips, improving the flat, and getting a beefier file. I'd be interested to see what you come up with on customizing.
@aijokker5 ай бұрын
They did not just throw everything else, they tried to stand out. And they did not think this through 😂
@richmccullough5 ай бұрын
So disappointing. I love the size and look. And then you opened it and it was such a let down. The pliers looked great and then failure for everything else. I was ready to buy 2 instantly when you pulled it from the box. I expected so much more from Walther.
@Cornpop85 ай бұрын
If they kept the same form factor and just added the tools from the leather man juice, that would be perfect.
@soundknight5 ай бұрын
I’d be interested on this if it had those tools you said. 3d Phillips, prybar flat head and a blade
@jwarehouse15 ай бұрын
That tool is a very nice size.....a lot of potential. Can't wait to see you disassemble it...and put in better implements...Keep blade...ditch everything else. Be interersting to see if Leatherman or Victorinox tools will fit. Better saw, file....91 mm Victorinox scissors,....maybe the awl from Farmer Alox that goes on the side of frame...a bit driver with a double sided bit...straight and phillips..... A tool this size / weight could be ideal...
@austinsutherland43655 ай бұрын
I love the form factor and build of it but its a gun maintenance tool so the inner tools arnt very useful for me
@greginthebox49755 ай бұрын
I missed the multitool reviews! Great video!
@develentsai32155 ай бұрын
They need to put a comb in it😂😂😂
@danielshannon46545 ай бұрын
Hi! Great video, I really like the foundations of the tool as well and I was curious if you were planning on making an update video for when you mod it?
@emochickluvzblk4 ай бұрын
I want a powerpint 2.0 with the fixed qc issues. I love that thing and carry it everyday just really hate the scissors
@Lostcyborg4 ай бұрын
i own a couple walther pistols and let me say i never heard of this tool. My range bag usually has a leatherman signal and some of the best tools made in the USA Chapman MFG. Ottherwise very informative video.
@gravity1man6695 ай бұрын
this is what ive been looking for in a multi tool for so loong the size it great and the grib looks likw my hand wont hurt after
@leodur135 ай бұрын
Looks like a great gun maintenence tool.
@michaelbuddy5 ай бұрын
beefy 1/4 bit driver, knife, file, prybar, combo opener. saw is nice too for whittling projects in woods. But for street use, not that important.
@Nothingactual5 ай бұрын
This is really cool but like u said, u know what u are talking about. Can you make a video of it with your custom tools in it? Would really apreciate a scissor, bit holder or just removing the rest.
@maxlvledc5 ай бұрын
When I do, I will
@TheMainMan.5 ай бұрын
"I got a number of them" 🤣 Maybe consider doing a giveaway?
@lestagez2 ай бұрын
JEEZ man, for you to be all about edc and survival, I’m gonna need you to do some research on firearms lol.
@mjnz5 ай бұрын
If Victorinox made a sub-5 oz Spirit Mini with pocket clip, I’d happily pay minimum $80 knowing it would be top quality and have useful tools, even if it’s only 3-4 like you said. I’ll keep dreaming
@Chaosgoat5 ай бұрын
I was just about to say the same, this isn't an EDC friendly tool, it's been designed for gun maintenance, not average daily tasks.
@rossauce125 ай бұрын
Im going to make a multi tool with a rachet. Scissors, and a saw. Other side will hold 1/4" bits for the rachet... doesnt need a knife cause u k ow u already have a pocket knife with u
@MarlonOwnsYourCake5 ай бұрын
I can't wait to see the mods, tbh.
@jobasti985 ай бұрын
I carry a Gerber Armbar Trade. Suits my needs with a bit driver
@frakismaximus30525 ай бұрын
James Bond carried a Walther!!!
@alltheseflavors5 ай бұрын
Well that looks like a multitool I'd actually carry
@walkingturtle19795 ай бұрын
Feel like i could pick locks and and cuffs with that
@rgdutch223 ай бұрын
That tool is ideal for a technician. For the pocket. Nothng greater than 24v DC. Small stuff. Not the bears you're trying to kill with a multitool.
@disciplebill5 ай бұрын
Hard-core Leatherman fan boy here. Just stopped to say GOT-DAMN, THAT'S A COOL TOOL! Edit: Lol, after watching, I realized not everyone understands the purpose of a GMT.
@maxlvledc5 ай бұрын
as I've stated, in my pinned post... I could have done better..but still only 2 of the components are gun specific.
@heart4Pahoa5 ай бұрын
Nice svelte design with so much potential. Would love to this with some much better interior tools. Could totally be marketed as a gentleman’s pocket multitool.
@Imme...15 ай бұрын
Always with the ar for sure
@sokol72155 ай бұрын
Yes
@Hutsul_5 ай бұрын
Very nice comparison and review man!!
@mowgli20713 ай бұрын
The gauge is box end wrenches. Which is ok, but I didn't see any scissors. That's really going to hurt them.
@Thorson915 ай бұрын
Looks like a pretty neat and lightweight option. When you said that basically you need only a blade, Phillips head and flathead on the pliers, my question is, doesn't it make more sense to replace the flathead and Phillips head by a hexbit driver, as in the GOAT tool? I'm curious if you'll mod it that way :)
@maxlvledc5 ай бұрын
This one is far to small for that..but even if you could..bit drivers can't get into recessed areas.
@Thorson915 ай бұрын
@@maxlvledc what do you think about a combination with a Leatherman bitholder plus the extender? could that be worth a try? I mean, you're a fantastic modder with an incredible knowledge and skills. do you think it could be worth a try?
@Atheistbatman4 ай бұрын
Yeah I’m getting one. PPQ baby
@gapster773 ай бұрын
Not having a go, just noticed on a lot of American vids that you guys mispronounce Knipex? The K is silent, like in Knife or Knot. I’m a Spark in the UK, and I’ve used Knipex predominantly in my 25 years in this line of work. You can’t beat the German tools, they are so well made 👌🏻
@STBLA1SE5 ай бұрын
Maybe some of those tools that are unrecognizable are used for one of their pistols for cleaning and whatnot