According to the product page (I'm still waiting mind to be sent while ordered just in the morning on 17th !!!) the included bit kit is weird mix - only metric Hexes and two square Robertson (one of which looks unique). The latter I suppose widely used only in the US and Canada. As the bit set does not differ across the ocean, that looks like "here is the bit kit for free tha half of which you won't ever use" ;))) ARC: #1 Torx #10 & #15, #1 1 Torx #20 & #25 #1 Pozi #2 & #1 #2 Hex 1.5mm & 2mm #2 Hex 2.5mm & 3mm #2 Hex 4mm & 5mm #1 Screwdriver 3/32" & 1/8" #1 Robertson #1 & 2 NONE Robertson #2 & 3 #1 + Square Drive #1 & #2 + Torx #10 & #15 + Torx #20 & #25 Torx #27 & #30 Eyeglass Screwdriver + Pozi #2 & #1 Phillips #1 & #2 Phillips #0 & #3 + Screwdriver 3/32" & 1/8" Screwdriver 5/32" & 3/16" Screwdriver 7/32" & 1/4" #2 Torx #6 & #8 + Hex 1.5mm & 2mm + Hex 2.5mm & 3mm + Hex 4mm & 5mm Hex 6mm & 1/4" Hex 7/32" & 3/16" Hex 5/32 & 9/64" Hex 1/8" & 7/64" Hex 3/32" & 5/64" Hex 1/16" & .050"

Leatherman must really be terrified of people modifying their tools. I can’t believe they’d go so far as to leave out the T8 from the set.

Hey, thanks for mentioning my holsters. The Garage 005 holster does fit the ARC, but I still will be making a perfect fit version just for the ARC. Even though it isn't mine, even I am tempted by that bit holder. Too bad I don't have easy access to low-cost machining like they do overseas.

I just recently bought a new leatherman and I was torn from the surge or the arc. I decided to go with the surge just because I feel value for what you get is better then the arc. Plus being able to remove the file/saw and either get aftermarket bosh ones or just oem replacements is great, add the benefit of using the diamond file to sharpen the blade on the surge in a pinch is great as well.

Thank you for this video, as well as the others you produce. I always look forward to seeing what you’re introducing next. As far as the Arc is concerned, Leatherman has priced itself out of my market. I bought a Wave+ earlier this year and added the bit kit & an bit extension. I was $150+ into a Leatherman EDC kit at that point. I won’t spend the extra for the Arc, especially since I bought the ByBury clone of the Surge, which is a really great tool. Unexpectedly, I bought the Gerber Dual Force (I think you informed us of the sale), and I use it more than any multitool I own. The chisel and pliers are fantastic. Thanks, again for your service.

In the Leatherman Q&A on reddit, one of the designers said they didn't put a hole in the awl because they view the implement as a pry/scrape/poke tool and the hole would decrease the overall strength.

I definitely like the mod you did here. I wish Leatherman would offer that mod on their other models. I’m not a guy who’d pay the $230 plus for the Ark just because of a better blade steel. My Leatherman blade is a backup for my pocket knife anyway and that’s where I invest in a quality blade steel. To be able to use three different styles of drivers with that modification is sweet.

I feel like this issue wouldn't be one if they sold each bit individually, I'd pay $5 per bit if they'd sell the t6/t8 bits separately 😪

If they made that bit holder slightly longer to allow more reach for regular 4mm bits. Then it would have been perfect. I love your channel, thank you for sharing all the mod videos. I really enjoyed watching them, and I learned a lot of new potentials to make my multitool better.

Waiting for my ARC. Ordered one yesterday. Have been using a wave for probably 10 years. Then I got a Swisstool which I love. But I decided to pull the trigger for some magnacut and the free form factor I’ve been wanting to try. Love the content brother!!

Just got my Arc today. Replacing my Surge as my EDC since I really don't use it every day for hard work like the surge is really made for. Prefer the lighter weight and all tools on the outside. Love the channel! Thanks for all the great information!

I actually like the flat bits because they take up less space. I usually carry a bit elder anyway so I can use 1/4” bits with that. I heard that the reason the bit kits were out of stock was because they needed to use another supplier and the new supplier increased the hardness of the bits. I’m not sure that true though it would be interesting to test that comment.

Great explanation, plus the after market replacement driver on the ARC was stellar. Surge or Wave + will be my go-to.

Love your videos and how in depth you go with details and your thoughts! I bought the arc today for one because I’m a knife guy “to your point” and I’ve been using the Free P2 as my harder use EDC multitool and with the tool set on the Arc it looks like those will be solved for me! I plan on making a video on my perspective of why I bought it when it arrives!

Such a great modification. Awesome tip.

It would be really nice if they had a "build your own tool" type of program so you can make a tool with the bit driver you installed, theres a handful of tools included on this that I have no use for and it would be nice to swap them out

Got mine for Christmas and am super stoaked! Don't miss the lacking bit yet but will keep it in consideration. Have had a surge for the past 3 years but it is so heavy that it lives in my backpack that I bring to work every day (pharmacist). I am also a knife nerd who has carried his spydiechef every day while not working. Now that I have the arc, I have a consolidated edc. All that aside, I can't get on board with losing the can opener--I use one almost every week

I have bought the Arc in Australia for $500 and i didn't even think about the bit kit. I have my wave+ on a pocket clip as I choose it for casual carry, you mentioned this is a wave+ upgrade. I have the heavier tools with a packed stealth as my EDC.

I have been eyeing the Surge. I really like the features of the Surge. Then, the Arc came out. Made in USA. Awesome. Your showing us, the viewers, this new product, the Arc, with owner's insights allows me to believe that there was not much courtesy to future potential buyers, omitting that one bit that normally comes with the Leatherman bits. Especially with the much higher price tag. Full disclosure report is greatly appreciated. Thank you.

My King Surge will remain my go to multi tool for work. I will replace the Wave+ with the ARC for my edc.

Great video and modification. Thanks for the headsup about the missing bit. Im a little less excited because of that. Leatherman, have to find a way to mess something up!

That is crappy of Leatherman to leave out one bit forcing you to buy a redundant bit kit to get all the bits. Leatherman doesn't even disclose this fact on their Arc web page.

Love the idea of modifying it but I’m gonna keep mine how it is, the flat ones are more portable if I need anything more robust chances are I have my tools anyways

Very informative. Thank you for the insights.

I edc a Swisstool Spirit with ratchet and 4mm adapter. I did buy Arc today because I will carry it with Swiss ratchet because Leatherman one is way too expensive in secondary market. Very well done and thought out video.

Great video! I like the 1/4" + 4mm bit holder you installed replacing the proprietary Letherman bit holder. Are you aware of a replacement that would work with the Surge? Thanks!

WOW!! Beautiful, the one with runes is amazing!!

I just got my charge plus tti about 2 months ago, I’ll keep my charge for edc and I was between the arc and surge for work, I’m still leaning definitely more towards the Surge now

I bought a Free P4 last year and that was pretty much the max I would spend on a multitool. This is just too expensive for me, and they do not even give you the full bit kit. Is the sheath leather? Maybe they should make a version with standard 420 steel. That would fine for my needs! I may scour Ebay later on for one!

awsome video brother keep on keepin on ill see you in the next video

Great job, man! I must say that Arc looks interesting.. BUT.. In Sweden it costs 3999 kr = 330 € for this money you can buy Surge/Charge/Wave or Free and for example Deka in Magnacut (if it is important to have a magnacut blade) and a few beers or some accessories. I plan on hunting for good sales and maybe then...

I really want the ARC, but I have to save up for it. Medical bills wiped out my savings. Thyroid issues costs alot. I am hoping that by the time I can afford it, they either do something like this or at least include the T6/T8 bit. I don't feel like I am totally missing out, because thanks to you, I have the Orange G10 Charge. That blade is still close to as sharp as it was out of the box. My Knifeless Rebar has a Awl, so if I think I will need it or go or work in a knife sensitive building, I bring that. I definitely still want the Arc, but just like my Multiforce, Charge, Rebar, and Powerpint, I would just use the wiha double sided bits and just like my Charge, I would have to use the extention. I would definitely consider this upgrade. It's awesome how it can use both 4mm and 1/4 bits.

I kinda like the Leatherman bit kit system better. Just for its carry ability. I can carry the tool and the full bit kit in the sheath plus the bit extender in those stretchy pockets on the outside. Absolutely perfect for edc.

What matters more is its functionality when required. It's not compromise mate, it's an improvement. The reason Leatherman left out the two most useful bit is just sales & marketing. The Arc is quite expensive and to get one into Australia will be a fortune due to tax & exchange. FYI we've made mods to our generics that it would be able to utilise different/multiple bits from almost all makers. Who needs warranty when we have MaxLvlEDC to show us what to do to make our tools much more useful. Cheers maestro from Australia.

I'm a mechatronics technician, and this Leatherman Arc multi-tool is literally what I need. I'm from Europe, and despite the high price of €300+, I definitely find it worth the effort.

i wish they could have the T shank from the surge i like having a few back up files laying around so i dont need to send in the tool for a new file everytime i wear it out

Love Leatherman-bit concept, however hate how soft they are and how fast they wear down. Wish some company produce that bits with different technology so they would last.

Nice mod Dom, a lot will be interested in this 👍

And ruler, and the ruler. I will be etching my own in to the Arc

Wow. I’d really love those full sized bits Thank you very much Hey leatherman. Do what’s right

Looking to get this. Never thought about particulates in the magnet. Are these easy to clean and remove those participates?

full-size 1/4" hex drive is absolutely amazing. for most people, the can opener is the one tool they don't use. truly the perfect mod.

First off, as always, thank you for your enlightening videos! Secondly, while I like the idea of a magnacut blade, I personally can not justify the price to myself. If I were to spent the money for Magnacut, it would have to be for a primary carry blade be it a folder or fixed blade. I also can't get behind any tool that only uses Proprietary bits. I hate that about the SAK Cybertool series as well all be it easier to glue a 4mm magnet into the socket in order to use standard bits rather than pay $20 a bit due to shipping. The only Leatherman(s) I have are the PS4 and ES4 (I was formerly in IT), I also purchased a PS4 for an EDC kit I made for my Mother-n-law because she is a seamstress (even though she's an Electrical Engineer) and the scissors are very good for nipping threads, the plyers for pulling stubborn needles, and the flat/2D Philips heads for making adjustments on sewing machines. But to each n their own, since I'm medically retired, I don't really have the need for one and can not call it a write off on taxes so the price is outrageous for Me and if I was going to spend that kinda cash it would probably be for a Victorinox. ((If they would bring back an updated Juice line, I'd consider getting another Leatherman, as I'm not paying secondary market prices))

Thanks and love your videos!💪🏻💪🏻

Man, the full 1/4” bit driver is what I want!

The best thing there is your mod! (Really, where can I get one? You've mentioned this before I think) I seriously doubt knife lovers will generally consider the blade worth it For this price you can get wayyyyy better handling knives. For most knife people, ergonomics is a major factor. Which is why every one of them carries a multitool for anything but the blade, excepting as a backup option. For non-knife people, they will only carr for the steel if they are the type to buy into "x says this is the best". Leatherman is approaching Gerber levels of frustrating for me. But somehow from the exact opposite direction. Every Gerber tool has one or two good ideas but cheaps out so much on the rest the tool itself becomes pointless. Leatherman has one or two decent ideas snd continues to price themselves out of the user-consumer market straight into the lifestyle and collector segment. So nah, they don't pay for that Bruce Springsteen stamp. You do.

@Maxlvledc I have a question. Do you think the serrated blade from the P4 would replace the saw? I have a P4 I hate because the tension that allows you to close the pliers is so loose that you can't actually open the pliers without that breaking to close. I quit using it because of that. But it has a nice serrated blade. I don't need a saw. I really like that bit driver and it looks like if I were going to void the warranty on the ARC I haven't even received yet, I might as well and make it perfect.

Did not know that the bit driver mod was a thing. I like it. I don't even have a tool I want to put it in yet, but I went ahead and ordered one. The shipping time is not looking quick, so I'll have time to decide if I want to pick up an Arc or put in something else.

That little modification would be a HUGE sell point for me. In fact I probably wouldn't even think about the price if that was an option.

1/4” driver and 4mm driver is awesome… great upgrade.

While I do love the idea of using standard 1/4" bits in theory, I'm not sure if it's actually better in practice. You lose another tool, and it's not a useless one - that flat driver is the prying tool as well, something you really shouldn't do with a bit driver. Plus, the way the Leatherman bit driver handles bit retention is (albeit only slightly) better than what these aftermarket parts offer. The 4mm bit holder is also really neat, but even a 4mm bit is wider than a Leatherman bit, so they would be hard pressed to include such a tool without taking up more space, compromising on strength, or creating proprietary precision bits that are as thin as their larger bits. And in the end, you still need to carry extra bits for it to even matter. The Leatherman bits are double sided, so in many cases it's just two tools in one, but you still have the pry tool. With the aftermarket, you can still have that two in one, but you lost the pry tool... I really don't think they are just trying to sell proprietary bits. I think most Wave owners probably don't buy a bit kit to start with, and probably only ever consider buying a replacement of the standard one it comes with if they break it. The Leatherman design allows them to fit more into one tool, while still giving you a two-in one with the option of swapping to other bit types, and the ability to replace broken bits. It isn't universal, but I think that it does what most users really need without wasting space. That's not to say that there aren't downsides to the way Leatherman does it, and they could certainly charge less for the replacements. And it isn't to say that this sort of upgrade doesn't make sense for some users, but I don't think I would agree that the standard bit driver is a "big issue" or that this is a "perfect fix" for it. I think there are much more frustrating issues that are much harder to solve with this and other Leatherman tools (not to mention other stuff that the company does).

I’ve wanted a p4 with bit driver for a while… considering that it cost me $160 with a student discount I got it seems reasonable

for years steel snobs have been crying that Leatherman does not have "premium" blade steels.... now Leatherman made one with an upgraded steel.. and the same people are crying about how much it costs. I like the tool set on this, and would like to at least try one, for a review. but I am happy with my 440 blades on my wave and surge.

I think the Arc is the leatherman I want to buy. With the bit kit, it allows for the use of bits in a pinch, I don't need tools for the most part for my job, but having an emergency tool just makes sense. Technically, I should either go for the wave or surge, but I really like the idea of fast plier access, and a blade I don't really have to sharpen (not a skill I have.)

Love the content especially the modding aspect! I've just ordered an Arc today along with the bitdriver mod and some anodised thumb grips for the file and saw😁 would love to see any other mods you do for the Arc or other Leatherman multitool👍 keep up the good work

can you provide a link or the exact description of the tools that you used to take apart your Leatherman? I have been trying to find the ratchet driver handle whatever you might wanna call it and I can’t figure it out. I guess I’m a little slow, but I’ve searched everything I can think of and haven’t found it yetsure appreciate it. Thank you so much. I also love your videos.

Is this bit holder available for the Surge? I have been toying with doing this mod for a while but the 4mm option will really seal the deal

Nice work👍

I like the mod. Where did you get the 1/4inch bit and 4mm bit holder from?

Hi, full size bit holder is the best mod ever IMO. Please could you say something more about quality of this piece? They say on the website is made of 420C steel, is it feel solid/strong enough since it looks very thin on the sides?

Nice work! I like it.

Get the bit extender and just use regular bits, that’s what I do, best option is obviously replace the bit holder like you say.

Epic setup love it🦾🔥🔥🔥..there are endless possibilities with leatherman multitools I just learned of a one where you can create a sheath on the belt clip using electricians shrink wrap..holstering something slimline which is the same size as the belt clip..👍🏻🔥🔥

that bit system is awesome. is it available for a charge tti? i need that in my life.

Would love to know where I can find the link to purchase that adapter piece that is exactly what I've been looking for

I think it would have been a good idea to have something like that on the arc. Would have made it more versatile than their bits. And from my experience using them they are not that great and have damaged several of them because they couldn't handle the work. Looks easy enough to install though.

I think my perfect tool, would be a Garage #005 and Arc combo. Swap all the Arc tool except the pry tool into the #005 handles, keeping the package opener/pry combo and the spring loaded pliers in the white grips, but with the black Arc blade, Arc awl, the slightly longer Arc file, and the slightly more refined designs of the bit drivers they put on the Arc. I think the saws are actually identical, and so are the scissors.

Leatherman put the scissors on the outside, and got it made enough in the USA to say it on the product. Comparing the cost to the wave and charge, while keeping in mind other costs that have gone up, the ark really is not that much. My problem is my pay not keeping pace. With all that I plan to get the leatherman ark, it might be next year and use the rei %20 off coupon.

Thank you that was super helpful and maybe I'll just go ahead and buy the charge that titanium with the s 30 blade steel in it😊

On one hand, the ARC has continued to trend of Leatherman annoying me. Throwing a bunch of collector's items at us for a year and then finally giving us a new tool, that includes everything the FREE series should have but put at an absurd price point due to blade steel. On the other hand, it has got me to revisit my FREE P2 and I've grown to appreciate it more despite it's issues. I'm saving my money for a GOAT.

I bought an arc I have a wave and the GOAT TOOL and just really wanted this for the magnacut blade I own the bit kit but have never used it. Sad to hear about how soft the metal is Thanks for the info I may do the mod eventually

Great video, thank you. Is that 1/4" bit driver that you installed in your video, part of the multi piece $45 kit at your link on eBay? The one on eBay looks like it contains a lot more pieces than what you showed in your video. Those were security torx bits that you had to use, correct? Also, you were going to link the video that discusses those ARC cases/holders? I am not seeing that link. Thank you again...

I never got any of the free series tools, but with all my multitools, except for my PowerPint, I use them alot in a L shape to get more torque on a screw. I haven't seen anyone doing that with a free series tools, but I have seen many people use other multitools in a L shape. Can this frame not handle that stress? I am not talking lagbolt stress, but sometimes I have to sink a 2-6 inch regular wood screw into a deck or like the other day I had to fix my step and I used my Rebar. Thanks for answering this question because it just occurred to me that this might be a reason why I don't get a free series tool.

Hello, the link for the bit holder shows 3 options (Type A, as well as C and D which are both out of stock). Is 'A' what is needed for the ARC? Thanks! Thinking of doing this mod!

As a casual user I literally could not care less about the bits and I don't think I've had any issues with the bits in my skeletool during the 7 plus years I've had it..

I do not have an arc. I have a free P2 I bought on discord with the zap wizard bit holder mod. Unfortunately as soon as I put a bit in it, the bit holder broke. What brand is this bit holder?

If they added that i would buy one tomorrow. That is a great idea for them to start using that.

Excellent mod, where abouts can I purchase that bit adapter? I’d like to modify a bond with that and some scissors

Hmm, that modification on my Surge will be sick. You know if a bit driver version exists for Surge? Thanks!

Thanks for the video. Please make a comparison between the Victorinox Spirit Mx Clip and the Leatherman Arc. The only thing that pulls me back from leatherman is that I live in a city near the sea and its tools rust a little faster. Thank you and have a good day

I saw your other video on how the cutters chipped. I'm wondering if the p4 cutters would fit instead. If so you could swap them out for the better version.

how do you make your Leatherman ARC Loosen up so you can actually flip the various components just with your thumb. I’ve had mine for a few months and I have tried everything and it’s still hard to get any of the components to come out!

what kind of vise do you use for table top work like that?

Great video! I wonder if there are mods like this that you can do on the Wave+. I'd love to put real bit driver on my Wave+.

Hey Dom, is the bit snug in the bit holder ? Like the hex looks "rounded" been wanting to buy that bit holder for quite a while now but it's 84$CAD... just wanna make sure haha

I don't see the "bit driver" at the ebay link provided for same--instead, it lists "Scalpel Blade Bit Holders Saw T-Shank for the Leatherman Free P2 P4 Series." If the original link is outdated, can you please supply an updated one? If you sell the bit driver through your affiliated links, I'll gladly buy one from there/you. Thanks--and great video!

Thanks for the tip on how you can by the second half of the bit kit. It was the big turnoff for this.

Good video! Perhaps LTG wants everyone to buy additional bit kits...What do you use the t6 & t8 for mainly? Thanks! Very nice mod...it makes sense...No, it is too expensive & the bit situation is strange...

Leatherman is creating the luxury multitool brand with the arc. In the pocketknife world, $230 is not that expensive really. Especially considering magnacut. Add the excellent toolset and I think this is the perfect pocket knife/multitool bridge.

I really need the can opener. Can it be placed instead of the smaller bit driver, which now becomes redundant, as you can fit micro screwdriver into rhe 4 mm socket?

I agree with you 100% about getting whatever works for you in this tool. I still think the ARC is excessively overpriced for the features it is offering

That bit driver is one of the best most useful tools ever on any multitool! 🛠️ I wonder if Leatherman has that same bir driver for the Surge and Wave? That would really increase the versatility of a lot tasks at work and home.

I was dead set on buying it at launch but I woke up on the 17th with a changed mind. Gonna wait it out.

Have your considered naming your channel, MaxlvlCustomedc 😂, well done!

I have the Klein mini ratchet. Highly recommended

Do you know if, or how I could replace the file with a serrated blade, I use the serrated blade more than the files and was wondering if I could, I haven’t modified any of the tools before though. I have a charge+ too, do you know if I could use the serrated blade from that?

I love that Mod!! Nice to be able to use ALL bits......of course would be nice if Leathermans bits had better steel/ heat treat....Can the can opener be put back in other side in place of micro driver? To me eye glass repair option is better on a smaller tool...like a 58mm size SAK......which they should offer....and can Wave style can opener be used instead of this style opener?

Nice mod for sure. Quite useful and solves some issues.

You wouldn’t happen to have a part number for the pice you put in would you? I just ordered on and that bit would be the perfect addition to the tool!

I would definitely take that over the Leatherman bit kit and can opener.