MAXPEEDINGRODS COILOVER INSTALL 01-05 Lexus IS300

Рет қаралды 6,742

fix it ish

2 жыл бұрын

15% off code：Fixitish
www.maxpeedingrods.com/produc...
IG : fixitish

Пікірлер: 41

@gcthrasherdfl 2 жыл бұрын

I appreciate this video. I used the same measurements as you and got the perfect stance I was looking for. I still need to adjust the dampening and maybe change preload, as mine is a bit bouncy, right now. But your video definitely helped my install go extremely smooth.

@fixitish 2 жыл бұрын

I’m glad it help you out!! As long as your not looking for a slammed look I think it’s just the right amount to make it look good but still functional.

@altonlynch4118 2 жыл бұрын

Can it work on a IS250 also

@timw2083 10 ай бұрын

Good video, thanks 🎉 I plan to only lower my IS sportcross one inch and using 225/40/18. Do you think the fenders will need to be rolled. The wheels are 18x8 35+ front and 18x8.5 38+ rear

@fixitish 10 ай бұрын

I think you’ll be fine without rolling the fenders. We went lower then 1inch and it was good

@Safe_revenue 2 жыл бұрын

Great vid bro, thinking of getting these myself, anything More I should know?

@fixitish 2 жыл бұрын

Thank you 🙏 these coilovers are super easy to change I don’t think anyone would have issues changing them out. Only thing that I noticed is they were soft. It took a little bit of driving to get them to feel normal and if you like them stiffer then stock you can adjust that on the spring as well. Other then that they have been good so far.

@Safe_revenue 2 жыл бұрын

@@fixitish thanks bro I’ll keep that in mind🤟

@thecommonsenseconservative5576 2 жыл бұрын

I bought these and at first I was really pissed off because they came with no instructions or any information on stock ride height so I just eyeballed it. Glad you showed how to measure though because I was thinking I would have to take it to a performance shop to have them adjust it. How are they working out for you? I bought them just because they were cheaper than OEM and I don't do any type of racing or anything so I just got these.

@fixitish 2 жыл бұрын

I’m glad this helped you out. So far so good, I’m actually surprised how good they ride for how cheap they are. So far 2 of our vehicles have them and both ride good

@modelotime3608 9 ай бұрын

@@fixitishupdate?

@fixitish 9 ай бұрын

@@modelotime3608 still riding good, I have some on another car and same they ride good

@n4stykevin Жыл бұрын

I didnt notice any adjusting on the front coilovers how you did the backs when you measured, do the fronts go lower bc i heard you mention they do but youd have to change preload, just got the same ones and im trying to see if where you had em adjusted to in the vid is maxed in front or if theres a lil more to go bc i wanna max them for my build

@fixitish Жыл бұрын

You could go lower if you compress the spring. Probably about an inch lower then what we had it at possibly more

@Grimiest.iS300 8 ай бұрын

Planning to daily drive my is300 . Hate the boat feeling . I just want something to hold me down for atleast a year or so till I get what I want . Do you recommend these? Or how are they holding up?

@fixitish 8 ай бұрын

They are still holding up you would just need to do some adjusting on the preload to make it stiffer. Out of the box how we installed them they were a bit soft like stock but after some adjustment it was good

@JeremyColombo 16 күн бұрын

how have these coilovers been in the long term? looking at putting them on a '02 IS with 17s

@fixitish 15 күн бұрын

They were good. Only issue with them is they were noisy when it got cold. If this is what you can afford it’s a good choice until you can get something better. I have a set on a different car and those have had no issues for 2yrs so far

@kamikaze6305 2 жыл бұрын

Are they still on the car? How are they holding up? And did you stiffen up the damping?, if so how much more stiffer were they? Thanks

@KungFuJordan Жыл бұрын

its a nice video. but these are trash. filled with vegetable oil. they were okay on my car to pass inspection. but with in 3k miles, they started to leak. also the upper bushings will make so much noise

@Ehren1337 Жыл бұрын

@@KungFuJordan sounds like your bushings or control arms problem not coilovers.

@KungFuJordan Жыл бұрын

@@Ehren1337 they we’re definitely the issue.they made so much top mount noise. Plus they do not last that long on our cars. I blew through the whole set. Switch to hks coils and haven’t heard that noise at all. Also, before I switched I lubed the top hat bushings with lithium grease and the noise went away.

@betohernan5757 2 жыл бұрын

Buen video carnal una pregunta esos coilovers le quedarán a mi lexus gs300 99 espero me puedas orientar gracias

@fixitish 2 жыл бұрын

No le quedan al gs300. Los de atras si Pero de enfrente no

@betohernan5757 2 жыл бұрын

Mil Gracias carnal por responder entonces los de adelante no quedan por la barrenacion de la base de las tuercas o de lo largo quedan chicos o grandes disculpa mi ignorancia carnal

@fixitish 2 жыл бұрын

Las tuercas de ariba son diferente no entran. Son la misma medida de lo largo. Y el tornillo de abajo Que va a las suspension es diferente medida

@fixitish 2 жыл бұрын

La suspension del gs300, ls400 y sc430 es igual de 98-05

@1jz_gte 2 жыл бұрын

Proper

@noduh736 2 жыл бұрын

How are they holding up I'm thinking of getting some for my is300

@fixitish 2 жыл бұрын

They have been pretty good, we did notice when it’s cold out they make noise going over speed bumps. I’m thinking it’s just lack of lubricant at the strut mount area . I just picked up another set for my 300zx and they ride really good as well

@noduh736 2 жыл бұрын

@@fixitish cool thanks bro ima get em then

@yumaautospa793 8 ай бұрын

@@noduh736 how they doing for you?

@noduh736 8 ай бұрын

@@yumaautospa793 still in the package in my storage room I meant to install them months ago but still haven't maybe your comment is a sign I should put em on