MaXpeedingRods GT3582 Turbo FIRST LOOK!
Рет қаралды 15,276
Күн бұрынTake a Look at MaXpeedingRods new line of Turbos:
MaXpeedingRods GT3582:
www.maxpeedingrods.com/catego...
Today we are taking a look at a MaXpeedingRods GT3582 that they sent for us to unbox and check out! Currently no plans for this turbo, but let us know what you would like us to do with it.
Also Buy stuff on Amazon: amzn.to/2KNazSI
---------------------------------------------------------------------------------------------------------
As always, if you enjoyed this video and found it in any way helpful, please hit that LIKE button. If you know anyone else who may benefit from this video, because their doing a similar project, then don't forget to SHARE this video everywhere. And if you haven't already, SUBSCRIBE.
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
For updates on new projects Follow me on INSTAGRAM
@INITIALIZED_FRS
--------------------------------------------------------------------------------------------------------
Music:
ChillHop Music:
/ chillhop. .
NCS:
/ nocopyrightsounds
Artists:
Bonus Points
Blazars
Jeff kaale
GYVUS
KOZAH
@morganlockerby8125 2 жыл бұрын
Thank you maxpeedingrods for quality stuff at great prices you got my vote👌
@balancemode4112 3 жыл бұрын
I just bought maxpeedingrods T3/T4 .57 A/R it spools fast! I love it
@trevathan187 2 жыл бұрын
what is the car its on
@dandonovan7328 2 жыл бұрын
May I ask what motor you have it on? In what vehicle? Been thinking about putting one on my four cylinder Nissan hardbody
@trevathan187 2 жыл бұрын
@@dandonovan7328 honda d-16
@captintemplar3705 2 жыл бұрын
@@trevathan187 I’m’ thinking about doing a b20 turbo in a few years, would you recommend this turbo?
@ecibet7773 2 жыл бұрын
@@trevathan187 gt35 street or standard perfomance??
@skillse_y3032 2 жыл бұрын
2017 Nissan Sentra SV 1.8 four-cylinder engine just wondering if this turbo is a good turbo for my car
@Fa5_4_lyfe 3 жыл бұрын
Just ordered turbo and feed lines from maxpeeding rods
@NotKritical 2 жыл бұрын
Do you know what feed line I need for the gt3582? I’ve been looking and can’t find it
@jj629ful 2 жыл бұрын
Is the turbo reliable?
@mrjklee 2 жыл бұрын
Hi there, which turbo from maxpeedingrods are you running in the frs. I know you mentioned it in the video
@JonnyBarajas 2 жыл бұрын
I don't. I have a Garrett gtx3176r gen 2 in the frs for now.
@wookecs8098 2 жыл бұрын
just wondering would this work for a 5.9L v8?
@wiskyd 2 жыл бұрын
Sure you just need twins
@affilihated8053 2 жыл бұрын
So I have to run water and oil cooling/lubrication for this turbo?
@billetbill7286 9 ай бұрын
If u want to but is not necesary
@chamatharavinda6792 3 жыл бұрын
how come gt30 spools faster? its turbine AR is 0.82,,this is 0.62, same as t3t4, only difference is bigger compressor AR than the t3t4...
@danielsvamp 6 ай бұрын
because the A/R is just a ratio, the actual turbine is probably smaller overall on the gt30
@itunesaccount760 2 жыл бұрын
do i have to set up the water cooling?
@wiskyd 2 жыл бұрын
Water is only needed on ball bearing turbos
@affilihated8053 2 жыл бұрын
@@wiskyd but in the cartridge is has 2 water ports. I just got mine today. And I'm on here wonder why about the same reason. It has water ports and the oil ports. Like wtf. Do I just block the water inlet/outlet off?
@wiskyd 2 жыл бұрын
@@affilihated8053 ask the manufacturer, but I have plugged the ports in the past. Water inlet and outlet just makes it a pita on such a small turbo that doesn't have ball bearings.
@shehatesleon 3 жыл бұрын
just bought a gt35 for my 2004 350z:)
@chunkyninja6988 2 жыл бұрын
How long did the turbo last you?
@shehatesleon 2 жыл бұрын
@@chunkyninja6988 i’ve ran it at 14psi since i put it on about 9 months ago, and it’s still doing just fine
@madting9635 2 жыл бұрын
@@shehatesleon don't know much about turbo, need yo buy one for a 3.5 letre engine what size turbo did you use, what cold side AR and hot side AR?
@shehatesleon 2 жыл бұрын
@@madting9635 i used the same turbo in this video
@justmeandalilbitofcrazy9506 Жыл бұрын
@varies I also have a 350z and I wanted to know at what rpm do you hit full boost thanks in advanced
@minhazhaque5340 3 жыл бұрын
How much hp can produce this kit?
@JonnyBarajas 3 жыл бұрын
Its a turbo, not a kit, I'd check their sites for spec.
@minhazhaque5340 3 жыл бұрын
@@JonnyBarajas sir if gt 3582 full setup kit in a engine how much hp produce in a hayabusa engine?kindly reply
@JonnyBarajas 3 жыл бұрын
@@minhazhaque5340 In a 3.0L engine, about 500hp-800hp
@minhazhaque5340 3 жыл бұрын
@@JonnyBarajas thanks
@HellHoundOne 2 жыл бұрын
@@minhazhaque5340 do not put this turbo on a bike.
@milkymilky158 Жыл бұрын
Orderd one other day for a Barra swap
@milkymilky158 Жыл бұрын
In a w114 merc
@joeygutierrez2657 3 жыл бұрын
they are just basically ebay branded diffrently
@07BLUESTI 2 жыл бұрын
Wait... Is this a garrett knock off?
@Simply_101yt 2 жыл бұрын
Honestly power is cool and all but I just want "stustustustu"
@JonnyBarajas 2 жыл бұрын
Truuue
@jasonford2863 2 жыл бұрын
$200 turbo lol 😆 quality
@johnbarajas6930 3 жыл бұрын
💯💯💯
Bought2Build
Рет қаралды 996
Matthew Chevalier
Рет қаралды 97 М.
АРХИВ ИСТОРИЙ
Рет қаралды 412 М.
Classic Cars Mechanic
Рет қаралды 4,2 МЛН