No video
Maya Hard Surface Modeling for Beginners
Рет қаралды 58,396
Күн бұрын➡️ Overwhelmed with 3d modeling & Topology? Start creating Professional 3d models with my FREE guide:
www.clkmg.com/...
➡️3d Modeling Beasts Facebook Group:
/ 705710056658253
➡️3d Modeling Inspired Tees:
teespring.com/...
Just starting out with Hard Surface Modeling in Maya? In this Maya Hard Surface Modeling Tutorial for Beginners, I will show you how to jump start your 3d Modeling with my personal workflow.
In this Tutorial, I will cover the following Maya Modeling Techniques :
► Holding Edges
► Density and Volume Loss.
► Fixing UV Distortion common with Sub Division Modeling.
► How curvature affects modeling difficulty.
► Working from larger shapes to smaller ones.
► 3D Modeling in Pieces vs 3D Modeling a shell.
This 3d Modeling tutorial is great for Maya Beginners.
On Social Media, Lets Connect!
/ jlmussi
/ jlmussi
www.artstation...
Music By:
www.hooksounds...
#mayamodeling2018 #mayahardsurface #jlmussi
@jlmussi Жыл бұрын
➡ Overwhelmed with 3d modeling & Topology? Start creating Professional 3d models with my FREE guide: www.clkmg.com/jlmussi/3d-modeling-guide
@moizali4698 Жыл бұрын
i have so many issues creating topology i hope I'll learn so much from your guidance, thanks for the tutorial.
@RM_3D 4 жыл бұрын
With the bevel mode you can untick chamfer to give you a fencing around the whole thing which i find the best out of all when you want even support throughout the hole shape
@ryanfuxa6738 5 жыл бұрын
Wish my teachers had been like you. This a way better Maya tutorial than all of theirs combined. Liked and subbed, sir.
@jlmussi 5 жыл бұрын
Thanks Ryan. Welcome to the team!
@shinku5463 5 жыл бұрын
Maya’s creases are supported in Zbrush through FBX or through GoZ. Zbrush does support creases you can even see it if you enable crease visibility. This was critical for one of my workflows.
@och70 5 жыл бұрын
Great advice right there at the end, for sure. If you won't see it, you don't need to model it. Helps keep your poly count low if you're working with a faces budget.
@jlmussi 5 жыл бұрын
Yup especially with more complex scenes and heavier models.
@Skycers 11 ай бұрын
This is very good! Thanks for putting your time and effort into this.
@aqualust5016 Жыл бұрын
The section about fencing already made my models 1000% more accurate. I wish they'd teach this shit up front at my school.
@viivcreations9161 4 жыл бұрын
lol i swear you sound like your giving fitness courses
@sharookali7866 4 жыл бұрын
ROFL.....I too realized
@capnanaya4642 3 жыл бұрын
SubD Workout
@joshlewis6490 5 жыл бұрын
This video was super helpful! Please create more videos regarding hard surface modeling! Even going through the modeling process of a simpler hard surface model.
@jlmussi 5 жыл бұрын
What kind of simpler models do you have in mind.
@joshlewis6490 5 жыл бұрын
Sorry for not replying! But your can was a great tutorial! Maybe you could go over how to hard surface model a mechanical piece that'd be on a robot or real world model like a car caliper/rotor assembly!
@1msD0S 5 жыл бұрын
Thanks for your great tutorials! I started learning modeling again a few months ago. It's actually like the 5th attempt because during the past 15 years I always got to some kind of brick wall of "how the hell do I do that? What am I doing wrong?" and quit. But not this time. Your tutorials are really helping me with that.
@jlmussi 5 жыл бұрын
Keep grinding...youll get there. Ive been attacking my weak areas. It always takes exponentially longer trying a new workflow.
@1msD0S 5 жыл бұрын
@@jlmussi thank you, that's really good to hear. I'm doing this for ~10 months now and I have produced almost nothing that I would consider worth to be shown to others... I see everything that's wrong with for example the edgeflow and topology in my meshes but lack the knowledge how to properly fix it. And also I constantly try to create things that are way to difficult for me and in the end I'm frustrated because it (of course) doesn't look like how I imagined it. But giving up is not an option, no matter what.
@jacksonlamme 4 жыл бұрын
are you still doing it?
@1msD0S 4 жыл бұрын
@@jacksonlamme yep, still at it (: and getting better and better
@jacksonlamme 4 жыл бұрын
@@1msD0S hooah!
@kimmysander2447 2 жыл бұрын
Getting into maya coming from 3Ds Max. Modeling was always my weak point. Love your channel, it’s super helpful!
@mostex_q8285 4 ай бұрын
Красавчик! Жги дальше, очень полезная инфа.
@kidehoward93 5 жыл бұрын
hey thanks for showing that uv trick!
@jlmussi 5 жыл бұрын
You're welcome. Thanks for watching!
@GuilleLT3D 5 жыл бұрын
Im glad you made a KZfaq channel. You are giving some useful info in your videos!
@jlmussi 5 жыл бұрын
Thanks brother! Glad you are enjoying my content.
@GuilleLT3D 5 жыл бұрын
JL Mussi Started modeling 2 years and a half ago and with the few videos you uploaded I learnt really useful things. Waiting for more!
@jlmussi 5 жыл бұрын
Glad to hear Guille! Don't hesitate to drop some suggestions. I create videos around content you guys ask.
@daisyfairy42 3 жыл бұрын
Dude, thanks so much :) I have to learn modeling for my thesis, and this is saving my butt in getting started properly!
@cobaltjam1614 3 жыл бұрын
never fear - Jl is here
@naifox1 5 жыл бұрын
I hope that you have new video about hypershade and how to have the best result rendering with arnold in maya
@bazejguaj6405 5 жыл бұрын
I would really like to see that too
@ibtihajabrarbhuiyan3315 5 жыл бұрын
A quality full video. Thumbs up!
@wingchunelsner 3 жыл бұрын
great explanation JL, thank you! Please continue
@damocles5047 4 жыл бұрын
dude, you are a very good man. thx for all these stuff.
@sebastianmaggio9657 5 жыл бұрын
you are amazing dude..., very well explained, you should submit this tutorials in the autodesk website because are wonderfully done..., ty so much for your time, you deserve million views, please dude keep with this, and I hope that you can do a tutorial about changing edgeflows, are one of the most dificult things in 3D modeling. cheers !...
@jlmussi 5 жыл бұрын
Thanks Sebastian for the kind words. I can possibly do one in the future.
@klarnorbert 4 жыл бұрын
@@jlmussi Awesome videos bro, one negative tho: your room's acoustic isn't the best. Other than that, cool! Can you do a little bit of echo reduction in your video edit software?
@orkunsanal 4 жыл бұрын
You need more subs brother. Thank you very much! Very helpful as always..
@RainbowSlinky5 3 жыл бұрын
nice robocop model!
@HOVA2195 4 жыл бұрын
That Robo Cop model looks out of this world. I would hate to UV that lol 😂
@romank8603 5 жыл бұрын
Great video and breakdown of modeling technique!
@jlmussi 5 жыл бұрын
Glad you enjoyed the video Roman.
@anndunham7067 4 жыл бұрын
Very helpful overview. Thank you
@eisharani9570 Жыл бұрын
thank you
@gallery13th53 5 жыл бұрын
Geat video JL !! I learned a lot with it, !!!!
@iNs4n3x27 3 жыл бұрын
Great video JL! And btw I believe creasing should work when bringing into zbrush. At least it has for me in the past!
@jaze_ph 3 жыл бұрын
Thanks brother. Great insights.
@dariaignateva8846 5 жыл бұрын
JL 17th was my birthday! I needed this video so much! Thanks, man! It's like a present lol Can you talk more about what is good and bad regarding topology and hard modeling in general? I am halfway through you channel, sorry if I you have talked about it already
@jlmussi 5 жыл бұрын
Happy belated birthday! I do cover edgeflow in most of my videos to some degree but I'll make a video just on the subject.
@dariaignateva8846 5 жыл бұрын
@@jlmussi Oh great! thank you! Really looking forward to that one
@HOVA2195 4 жыл бұрын
You should do a video about doing complex shapes in Maya 2019. I'm having trouble modeling a camera right now for school and I'm really failing 😔
@yashsharmajii 4 жыл бұрын
You explain really great man!
@bigbadparker7113 5 жыл бұрын
thank you so much. Its really helpful
@spacefreak8863 5 жыл бұрын
Dude, make more vids about Maya(tips,tricks...),pls =)
@jlmussi 5 жыл бұрын
I got you!
@jellybeansi 2 жыл бұрын
I remember my first hard modeling assignment. People chose box/old-fashioned cars... I was silly and tried to model a 2011 Camaro. It did not go well, lol.
@tobigrantlbart 7 ай бұрын
When I bevel, don't I get a tri? Or an ngon depending on the bevel? I asked because this is giving me problems
@piterpb7188 5 жыл бұрын
great video thanks
@jlmussi 5 жыл бұрын
Glad you enjoyed it Piter. Thanks for stopping by!
@evgeniya7015 3 жыл бұрын
Thx a lot!
@ashikvs5830 3 жыл бұрын
Do u have abTwoface tool for blendshape
@tonyOvarela 5 жыл бұрын
Thx men for your advise !
@jlmussi 5 жыл бұрын
You're welcome Tony, glad I could help.
@mikeue4729 5 жыл бұрын
Nice vid! make more of em please! Just 1 quick question, how do you enable the onscreen verts, edges , faces infos to show up?
@jlmussi 5 жыл бұрын
Glad you enjoyed the video! To enable your poly count, from the top menu go to Display> Heads Up Display> Poly Count.
@jairalfaro9765 5 жыл бұрын
awesome Video
@jlmussi 5 жыл бұрын
Thanks for stopping by Gerardo.
@VenaliNaera 5 жыл бұрын
thanks
@MichaelHurdleStudio 5 жыл бұрын
Dope ass training bro.
@jlmussi 5 жыл бұрын
Thanks brother...always nice to see a fellow YT Creator stop by.
@MichaelHurdleStudio 5 жыл бұрын
@@jlmussi No doubt bro. I subbed. I like your information. I'm starting to get back into Maya and really need some catch up videos. You'rs helped.
@MuhammadKhan-bs8td Жыл бұрын
I always used fencing, didn't use bevel as it creates a tri face. Shouldn't it be avoided? My model becomes very heavy due to fencing (adding edge loops through whole model). Better to use bevel? As it creates tri but doesn't add edges through whole model.
@ironknightzero Жыл бұрын
turn chamfer off when using bevel and it'll remove the tris
@Conceptsofsanket 2 жыл бұрын
Hi, If I use Soften edges in place of smooth for Hard surface modelling ... Will it give the same result for lighting afterwards ?
@nalinpuri4519 5 жыл бұрын
Sir i am finding it difficult to retopologize the subdivision model in blender.Is there a way to do it?
@JDSPonYT 5 жыл бұрын
Just a tip, the microphone should be vertical and facing you, the capsule inst facing the top side of the microphone
@jlmussi 5 жыл бұрын
What benefit does the mic being vertical vs sideways make?
@GeorgeSladkovsky 5 жыл бұрын
@@jlmussi The benefit is that the sound travels directly to the membrane of the microphone instead of bouncing off the walls of the room and then traveling to the mic. Less echo/reverb, more volume, better frequency response, better quality overall. Check some images on how to setup a cardioid condenser microphone for best results.
@GeorgeSladkovsky 5 жыл бұрын
@@jlmussi You can still use it horizontally, just point the capsule at you (or at your neck, as some suggest). Normally, the side where the logo/manufacturer name is front, and back is the opposite side (and it sometimes actually says "Back").
@jlmussi 5 жыл бұрын
@@GeorgeSladkovsky Thanks for the advice.
@sirius_black_usa 3 жыл бұрын
What type of bevel is best for low poly game assets?
@filmstuff0 2 жыл бұрын
my guy
@cortex4z132 5 жыл бұрын
So which one is for subD modeling?
@icarosh1 3 жыл бұрын
Hi! first of all thanks for the explanation. Quick question, when you mention sub divs you basically are just smooth previewing your mesh by pressing number 3. Does this mean that when you are done modeling and want to export your mesh, as fbx or obj, you would have to apply an actual smooth with division level 2 for example? Thanks in advance for the help
@Blood_Rapture 3 жыл бұрын
you can specify if you want to in fbx export settings
@ohlavenka 5 жыл бұрын
And tutorials for subdivision modeling?
@wizard_still 4 жыл бұрын
I'm from Finland Mussi cool
@TheGaimingTurtle1 4 жыл бұрын
I can only use the multi-cut tool once on each face. Help? Edit: Also, How do you subdivide without smoothing it? I just want more surfaces to work with, not smoothing it out.
@RM_3D 4 жыл бұрын
under Mesh or edit mesh theres an Add divisions button at the top that will sub d it but keep the shape
@xicorulez 5 жыл бұрын
how do you think of the fittings of a complex piece, what do I need to study?
@jlmussi 5 жыл бұрын
Not exactly what you mean...can you elaborate a bit more?
@CaseLogsTrades 4 жыл бұрын
That hat threw me off at the beginning but damn very informative! thanks
@jlmussi 4 жыл бұрын
Just a friendly reminder to never judge a book by its cover :-) Glad you found the video helpful.
@therealKrak 5 жыл бұрын
if i want to create a 3d model for a game... do i need holding edges or is this just needed if i want to render something in maya?
@jlmussi 5 жыл бұрын
No Sub D workflow is better suited for film/ vfx but could also work if you have a game with a higher polygon budget. Some shapes don't benefit that much from a sub d workflow, especially very straight and angular shapes. You could get a similar result from simply beveling an edge and your poly count would greatly be reduced.
@therealKrak 5 жыл бұрын
@@jlmussi Thank you very much! Your response came pretty quick. You are the best!
@jlmussi 5 жыл бұрын
@@therealKrak You're welcome, glad I could help.
@user-fuckoffffffff4590 4 жыл бұрын
greate_ like ur chneel.
@MrVampura Жыл бұрын
This robocop scene really demotivates
@phoenix2gaming346 6 ай бұрын
Gym trainer 😂
@mastjappa 4 жыл бұрын
Both blender and c4d support creasing but it is a pretty much useless method.
@KaranBhand 3 жыл бұрын
thank you
Friendeez
Рет қаралды 12 МЛН